Keep your valuable tools in peak condition!Combination Waterstones: For preliminary sharpening where chips exist or bevel angle need to be changed, use the 250/100 waterstone. To remove smaller nicks and do a finish sharpening of woodworking chisels and other tools, the 800/4000 combination is the best choice. Finally, use the 1000/6000 waterstone for creating a polished edge. As shown in the photo on the left.Extremely tough man made abrasive material. These stones cut faster than oilstones. Stones must be soaked in water prior to use and kept wet with water during use. Waterstones develop a slurry to speed the honing process.20549 - 250/1000 Combination Grit Waterstone: 7-1/4" (L) x 1" (thick) x 2-1/4" (W)20542 - 800/4000 Combination Grit Waterstone: 7-1/4" (L) x 1" (thick) x 2-1/4" (W)47506 - 1000/6000 Combination Grit Waterstone: 8-1/8" (L) x 1" (thick) x 2-1/16" (W)47522 - Nagura Stone: 3" (L) x 1" (thick) x 7/8" (W)Nagura Stone: Forms a paste on finer grit Waterstones to speed and enhance polishing. Use with the 6000 grit stone. These stones can be reflattened after sharpening wears the surface by wet sanding the stone on a flat surface with silicone carbide wet - dry abrasive sheet.Waterstone Holder: For non-slip sharpening. The arms are made from chrome plated steel that resists rusting. Holder handles stones 7 to 9" long.
These Bluefire cut-off wheels boast a thin kerf for fast cutting and low kerf loss on metal pipe, metal plate and sheet metal. Bluefire wheels are the product of advanced chemistry using zirconia alumina abrasive with premium aluminum oxide grain. They provide an excellent performance-to-price ratio, boasting 2-3 times the life of aluminum oxide wheels for lower total grinding costs. With broad utility from light- to heavy-pressure applications, they make an ideal choice for stainless steel, carbon steel, alloys and gray iron, and are also a good choice for mild carbon, high tensile steel and cast iron. Formulated from zirconia alumina/aluminum oxideType 01/41 wheel shape (essentially a straight flat disc)Use with an angle grinder
Cool cutting prevents overheating - enjoy faster sharpening with less danger of taking the temper out of the tool.Highly recommended for tool steel!Aluminum oxide grinding wheels are a giant step above conventional cutting wheels, which tend to burn tools as the grinding surface becomes dull and glazed.Ideal for chisels and plane irons.Made of granulated aluminum oxide with a vitrified white bond, which allows the grains of abrasive to wear off, providing a consistently fresh grinding surface.The 6" wheels have a 1" arbor hole with bushings for 7/8", 3/4", 5/8" and 1/2" arbors.Recommended for maximum 4140 RPM for 6" Wheels.Dressing stone stick No longer available.
Whether you're cleaning up rough patches on a carving, ferreting out dried glue from a corner, or removing rust, paint or corrosion, Sandits make the perfect, low-cost tool for the job. Sandits Wedges are slightly thinner at the tip than the original Sandits, and slightly wider and flatter for better sanding of flat surfaces. They have 120 grit tips on one end, and 180 grit on the opposite end. Since the abrasive is embedded in marine-grade epoxy, Sandits are ideal for marine use or in wet applications. Use on wood, metal, plastics-any place where you need sanding, shaping, smoothing or polishing. 120-grit on one end; 180-grit on the opposite endTip is 5/16''W, with a thickness tapering from 3/16'' to 1/8'' at the tip (dimensions are approximate)5-13/16''L overallAluminum oxide abrasiveVersatile, portable, non-conductive and waterproofLow-cost; no need for a power outletGreat for cleaning electrical contacts