Pages: 1 2 3 4 5 6 7 8 9 10next pagelast page

Supermax 37'' Dual Drum 3 Phase Sander - 737103

Supermax 37'' Dual Drum 3 Phase Sander - 737103
$6,049.99

Make quick, easy work of large-scale production sanding and get remarkably smooth, consistent results with this SuperMax 37'' Dual Drum Sander. Equipped with a continuous-duty 5HP 208-230V three-phase motor, it can handle pieces up to 37" wide and 12" thick.Shown with SuperMax Caster Set - Sold Separately (1004534), SuperMax ProScale DRO - Sold Separately (1004533) and SuperMax Rack'N Roll - Not Included.Exceptional SuperMax FeaturesINTELLISAND Control: Automatically adjusts conveyor speed based on load Prevents gouging, damaging or burning stock Provides consistent finish even with varying grain pattern and density Greatly increases abrasive planing and dimensioning speedFlatness Guarantee: Precision-flattened steel conveyor bed reinforced with four steel cross sections for no "flex" in conveyor, guaranteeing flatness to less than .010" across the width of the sanderAbrasive conveyor belt offers the best grip for raw wood, giving you the ability to accommodate stock that is much shorter or thinnerPatented Abrasive Attachment System effectively tensions the abrasive wraps, preventing loose abrasive and overlapEasiest access to abrasive fastening system of any drum sander! Machine design includes additional space around abrasive, eliminating the need for special tools.Self-cooling drum prevents overheating and extends abrasive lifeAdditional Features Drum ball bearing are sealed and permanently lubricated Cast stand, zinc-plate steel bed, centerless ground column tubes

Supermax 37'' Dual Drum 3 Phase Sander - 737003

Supermax 37'' Dual Drum 3 Phase Sander - 737003
$6,049.99

Make quick, easy work of large-scale production sanding and get remarkably smooth, consistent results with this SuperMax 37'' Dual Drum Sander. Equipped with a continuous-duty 5HP 208-230V three-phase motor, it can handle pieces up to 37" wide and 12" thick.Shown with SuperMax Caster Set - Sold Separately (1004534), SuperMax ProScale DRO - Sold Separately (1004533) and SuperMax Rack'N Roll - Not Included.Exceptional SuperMax FeaturesINTELLISAND Control: Automatically adjusts conveyor speed based on load Prevents gouging, damaging or burning stock Provides consistent finish even with varying grain pattern and density Greatly increases abrasive planing and dimensioning speedFlatness Guarantee: Precision-flattened steel conveyor bed reinforced with four steel cross sections for no "flex" in conveyor, guaranteeing flatness to less than .010" across the width of the sanderAbrasive conveyor belt offers the best grip for raw wood, giving you the ability to accommodate stock that is much shorter or thinnerPatented Abrasive Attachment System effectively tensions the abrasive wraps, preventing loose abrasive and overlapEasiest access to abrasive fastening system of any drum sander! Machine design includes additional space around abrasive, eliminating the need for special tools.Self-cooling drum prevents overheating and extends abrasive lifeAdditional Features Drum ball bearing are sealed and permanently lubricated Cast stand, zinc-plate steel bed, centerless ground column tubes

SuperMax 25x2 ES 25'' Dual Drum Sander

SuperMax 25x2 ES 25'' Dual Drum Sander
$2,999.99

The SuperMax 25x2 ES Dual Drum Sander has all the exceptional features of other SuperMax sanders, but adds an exclusive edge-sanding feature that makes it easy to sand the edges as well as the faces of your material. With two 25'' drums and a 3HP motor, you'll make quick work of thicknessing and surfacing rough material. The rear drum uses a finer grit sandpaper and is set slightly lower so you can sand to a finer grit and take off more material with just one pass through the sander. Digital read-outs make it easy to adjust the machine for optimal performance. The 25x2 ES also features INTELLISAND technology, which automatically adjusts the conveyor speed based on the hardness of the material and the amount of material being taken off.Features:Edge sanding feature lets you easily sand edges of panels or doors-no need for an additional machineTwo built-in digital read-outs for fast, accurate setupsTop digital read-out displays sanding height (thickness of stock)Bottom digital read-out displays differential between front and rear drum''0'' stop device for rear drum to quickly reset correct heightSanding heads move up and down rather than the conveyor so your infeed/outfeed tables can be permanently set upINTELLISAND Control automatically adjusts conveyor speed based on load, promoting a consistent finish even with varying grain patterns and wood densitiesPatented Abrasive Attachment System effectively tensions the abrasive wraps, preventing loose abrasive and overlapSelf-cooling drum prevents overheating and extends abrasive lifeRuns quieter with almost 100% power transfer from motor to drumsMagnetic starterImportant: The assembly of this sander requires properly rated lifting equipment (hoist, straps, or forklift). Please see the User Manual for further details.

Supermax 25'' Dual Drum 1 Phase Sander - 713003

Supermax 25'' Dual Drum 1 Phase Sander - 713003
$2,690.00

Make quick, easy work of large-scale production sanding and get remarkably smooth, consistent results with this SuperMax 25'' Dual Drum Sander. Equipped with a continuous-duty 5HP 208-230V single-phase motor, it can handle pieces up to 25'' wide and 6'' thick. (Shown with SuperMax Caster Set, Sold Separately 1004534)Exceptional SuperMax FeaturesINTELLISAND Control: Automatically adjusts conveyor speed based on load Prevents gouging, damaging or burning stock Provides consistent finish even with varying grain pattern and density Greatly increases abrasive planing and dimensioning speedFlatness Guarantee: Precision-flattened steel conveyor bed reinforced with four steel cross sections for no "flex" in conveyor, guaranteeing flatness to less than .010" across the width of the sanderAbrasive conveyor belt offers the best grip for raw wood, giving you the ability to accommodate stock that is much shorter or thinnerPatented Abrasive Attachment System effectively tensions the abrasive wraps, preventing loose abrasive and overlapEasiest access to abrasive fastening system of any drum sander! Machine design includes additional space around abrasive, eliminating the need for special tools.Self-cooling drum prevents overheating and extends abrasive lifeAdditional Features Drum ball bearing are sealed and permanently lubricated Cast stand, zinc-plate steel bed, centerless ground column tubes

Supermax 25'' Dual Drum 3 Phase Sander - 713103

Supermax 25'' Dual Drum 3 Phase Sander - 713103
$2,690.00

Make quick, easy work of large-scale production sanding and get remarkably smooth, consistent results with this SuperMax 25'' Dual Drum Sander. Equipped with a continuous-duty 5HP 208-230V three-phase motor, it can handle pieces up to 25'' wide and 6'' thick.(Shown with SuperMax Caster Set, Sold Separately 1004534)Exceptional SuperMax FeaturesINTELLISAND Control: Automatically adjusts conveyor speed based on load Prevents gouging, damaging or burning stock Provides consistent finish even with varying grain pattern and density Greatly increases abrasive planing and dimensioning speedFlatness Guarantee: Precision-flattened steel conveyor bed reinforced with four steel cross sections for no "flex" in conveyor, guaranteeing flatness to less than .010" across the width of the sanderAbrasive conveyor belt offers the best grip for raw wood, giving you the ability to accommodate stock that is much shorter or thinnerPatented Abrasive Attachment System effectively tensions the abrasive wraps, preventing loose abrasive and overlapEasiest access to abrasive fastening system of any drum sander! Machine design includes additional space around abrasive, eliminating the need for special tools.Self-cooling drum prevents overheating and extends abrasive lifeAdditional Features Drum ball bearing are sealed and permanently lubricated Cast stand, zinc-plate steel bed, centerless ground column tubes

Jet Drum Sander 3HP With Table & Casters

Jet Drum Sander 3HP With Table & Casters
$2,649.99

The new JET model 22-44 PRO-3 - Drum Sander has even more great features. We've added a digital readout that displays the exact thickness of the finished piece or allows the user to preset the exact thickness they want for the finished piece. Four casters mobilize your drum sander and also lock into place for stability during use. Both infeed and outfeed tables come standard with the 22- 44 PRO-3 and provide extra support for the workpiece. The powerful 3HP motor is designed for heavier use for longer periods of time.Features:Our Exclusive SandSmart Infinitely variable-feed control produces the ultimate finish at a rate from 0 to 10 feet per minute and prevents machine overloadPatented conveyor belt TRACKERS dramatically reduce the need for manual belt adjustments22'' wide suspended drum is supported on both ends with a truss-like carriage arm for greater strength and easy alignment to the table surface for consistent performanceSealed and permanently lubricated drum ball bearings for longer lifePrecision-flattened reinforced steel conveyor bed and no-give power feed belt provide a constant smooth sanding action for better resultsAdjustable drum height and downward pressure feature virtually eliminates snipeLarge cast-iron handwheel adjusts height at 3/32'' per turn for precise sanding thickness controlPatented abrasive take-up fasteners make changing abrasives quick and easyDepth gauge has locking stop to ensure accuracyOn/off switch with overload protection is front- mounted for operator's convenienceOne feed and one drive motor for superior sanding controlContinuous-duty, 3HP motor is designed for heavier use for longer periods of timeDRO for more accurate sanding

Powermatic DS-20 20" Disc Sander, 3HP 3PH 230/460V

Powermatic DS-20 20" Disc Sander, 3HP 3PH 230/460V
$2,489.00

The DS20 20" Disc Sander is ideal for the professional or serious home woodworking shop. It has direct drive from motor to disc for maximum efficiency, with a hand activated brake for quick stoppage of disc. The DS20 sander has an extra large sanding surface, adjustable tilting work table, and sturdy cast iron base. The swing away guard makes changing abrasive discs quick and easy.Features:Forward/reverse switchDirect drive from motor to disc for maximum efficiency Tilting table allows bevel sanding Miter gauge for angle sanding 20" sanding disc for larger workpieces 4" port for connection to any dust collection system

Jet Oscillating Drum Sander 1.75HP w/Closed Stand

Jet Oscillating Drum Sander 1.75HP w/Closed Stand
$2,449.99

The new model 22-44 OSC Drum Sander has an exclusive oscillating feature, with the push of a button the 22-44OSC sander can be operated as a simple sander or as an oscillating sander. When operating as a linear sander, the sander drum rotates as the conveyor feeds the workpiece through. When in the oscillating mode, in addition to the linear sanding operation, the sanding drum head oscillates from left to right and lowers heat build-up on the sanding belt to reduce loading and burning. Additional features include a built-in cabinet door for easy access to storage, patented conveyor TRACKERS that reduce the need for manual belt adjustments and our Exclusive SandSmart infinitely variable feed control that produces the ultimate finish to your woodworking project.Features:Oscillating feature reduces heat build-up on sanding belt to reduce loading and burning Infinitely variable-feed control produces the ultimate finish at a rate from 0 to 10 feet per minute Patented conveyor belt TRACKERS dramatically reduce the need for manual belt adjustments Sealed and permanently lubricated drum ball bearings for longer life Precision-flattened reinforced steel conveyor bed and no-give power feed belt provide a constant smooth sanding action for better results Adjustable drum height and downward pressure feature virtually eliminates snipe Large cast-iron handwheel adjusts height at 3/32" per turn for precise sanding thickness control Patented abrasive take-up fasteners make changing abrasives quick and easy Depth gauge has locking stop to ensure accuracy On/off switch with overload protection is front-mounted for operator's convenience One feed and one drive motor for superior sanding control Continuous-duty, 1-3/4HP motor is designed for heavier use for longer periods of time Our EXCLUSIVE SandSmart infinitely variable-feed control produces the ultimate finish at a rate from 0 to 10 feet per minute and prevents machine overload

Jet Drum Sander 1.75HP w/Closed Stand & Casters

Jet Drum Sander 1.75HP w/Closed Stand & Casters
$1,939.99

This sander is one of the largest in it's class. You can sand up to 44" wide with better accuracy then any other sander in it's category. Features:Exclusive SandSmart infinitely variable-speed control produces the ultimate finish at a rate from 0 to 10 feet per minute and prevents machine overload.Patented conveyor belt Trackers dramatically reduce the need for manual belt adjustment.Precision-machined and balanced extruded aluminum drum is self-cooling to protect the surface being sanded from heat damage.Sealed and permanently lubricated drum ball bearings for longer life.Precision-flattened reinforced steel conveyor bed and no-give power feed belt provide a flat sanding surface for better results.Adjustable drum height and downward pressure feature virtually eliminate snipe.1700 RPM drum speed.Large cast-iron handwheel adjusts height at 1/16" per turn for precise sanding thickness control.Patented abrasive take-up fasteners make changing abrasives quick and easy.Continuous-duty, 1-3/4 HP motor is designed for consistent power and long life.On/off switch with overload protection is front-mounted for operator convenience.One feed and one drive motor for superior sanding control.

Jet Drum Sander 1.75HP w/Open Stand

Jet Drum Sander 1.75HP w/Open Stand
$1,784.99

This sander is a leader in it's class. It can sand up to 44" wide with greater accuracy that any thing else in it's class. Technical Details:Our Exclusive SandSmart infinitely variable-feed control produces the ultimate finish at a rate from 0 to 10 feet per minute and prevents machine overloadPatented conveyor belt Trackers dramatically reduce the need for manual belt adjustmentPrecision-machined and balanced extruded aluminum drum is self-cooling to protect the surface being sanded from heat-damageSealed and permanently lubricated drum ball bearings for longer lifePrecision-fl attened reinforced steel conveyor bed and no-give power feed belt provide a fl at sanding surface for better resultsAdjustable drum height and downward pressure feature virtually eliminates snipeLarge cast-iron handwheel adjusts height at 1/16" per turn for precise sanding thickness controlPatented abrasive take-up fasteners make changing abrasives quick and easyContinuous-duty, 1-3/4HP motor is designed for consistent power and long lifeOn/off switch with overload protection is front-mounted for operator's convenienceOne feed and one drive motor for superior sanding control

Jet Bench Top Drum Sander

Jet Bench Top Drum Sander
$1,709.99

Features:Sandsmart control continuously monitors the load on the drum motor and automatically regulates the speed of the conveyor motor to maintain the highest feed rate without overload Patented conveyor belt TRACKERS dramatically reduce the need for manual belt adjustments Precision-machined and balanced extruded aluminum drum is self-cooling to protect the surface being sanded from heat-damage Sealed and permanently lubricated drum ball bearings for longer life Precision-flattened reinforced steel conveyor bed and no-give power feed belt provide a flat sanding surface for better resultsAdjustable drum height and downward pressure feature virtually eliminates snipe Large cast-iron handwheel adjusts height at 1/16" per turn for precise sanding thickness control Patented abrasive take-up fasteners make changing abrasives quick and easy Infinitely variable-feed control produces the ultimate finish at a rate from 0 to 10 feet per minute On/off switch with overload protection is front-mounted for operator's convenience One feed and one drive motor for superior sanding control Continuous-duty, 1-3/4HP motor is designed for heavier use for longer periods of time Our exclusive SandSmart infinitely variable-feed control produces the ultimate finish at a rate from 0 to 10 feet per minute and prevents machine overload

Powermatic 6'' x 48'' Belt and 12'' Disc Sander Combo Machine 1-1/2 HP

Powermatic 6'' x 48'' Belt and 12'' Disc Sander Combo Machine 1-1/2 HP
$1,491.00

Loaded with features, the 31A from Powermatic can tackle the most demanding tasks. Full cast iron construction allows both metal and woodworking to be done on the same machine and the Integral Dual Dust Port keeps both belt and disc portions clean, extending abrasive life. The articulating table mounted on the 6" x 48" belt sander head can be used vertically, horizontally, or angled to accommodate diverse jobs. The belt head has an indexing pin with stops at 0, 45° and 90° and the head lock allows use at any angle in-between. Removing the top guard allows contour sanding and the cast iron tables with miter gauge slots and positive stops make set-up fast, accurate, and simple for any angle.Features:Multi-position belt head locks at any angle from 0° to 90°; includes indexing pin for 0, 45°, and 90° stops Belt and disc tables are precision ground cast iron with miter slots Belt table tilts down to 45°, and can be set for beveled and mitered angle sanding Full cast iron platen with solid crowned aluminum drums for smooth sanding belt movement and support 12" disc is balanced for flat, even coverage

Powermatic 31A Sander, 6"x48" Belt/12" Disc, 2HP 3PH 230/460V, Manual Switch

Powermatic 31A Sander, 6"x48" Belt/12" Disc, 2HP 3PH 230/460V, Manual Switch
$1,491.00

Loaded with features, the 31A from Powermatic can tackle the most demanding tasks. Full cast iron construction allows both metal and woodworking to be done on the same machine and the Integral Dual Dust Port keeps both belt and disc portions clean, extending abrasive life. The articulating table mounted on the 6" x 48" belt sander head can be used vertically, horizontally, or angled to accommodate diverse jobs. The belt head has an indexing pin with stops at 0, 45° and 90° and the head lock allows use at any angle in-between. Removing the top guard allows contour sanding and the cast iron tables with miter gauge slots and positive stops make set-up fast, accurate, and simple for any angle.Features:Multi-position belt head locks at any angle from 0° to 90°; includes indexing pin for 0, 45°, and 90° stops Belt and disc tables are precision ground cast iron with miter slots Belt table tilts down to 45°, and can be set for beveled and mitered angle sanding Full cast iron platen with solid crowned aluminum drums for smooth sanding belt movement and support 12" disc is balanced for flat, even coverage

Supermax 19-38 Drum Sander

Supermax 19-38 Drum Sander
$1,399.00

Perfect for the small shop or woodworking hobbyist, the SuperMax 19-38 churns out flat, smooth surfaces with unwavering consistency, giving you the benefits of a wide belt sander at a price that won't break the bank. Gone are the dips, gouges and sore arms of the hand sanding process. The 19-38 Drum Sander offers 19" width sanding in a single pass and 38" in a double pass, perfect for flattening and smoothing raised panel doors and drawer fronts, table tops, cabinet parts and much more. The 19-38 Drum Sander comes standard on the Open Stand. The drum is pre-wrapped with 80 grit sandpaper.Features:Simple alignment: Just one nut will adjust the conveyor parallel to the sanding head.Indexed alignment setting for narrow and wide stock. When sanding stock wider than 19", the index lever will properly adjust the conveyor for flawless sanding of wide boards.Easy height adjustments: Thrust bearing below handle and nut above it prevents drum from moving out of set position while sanding. No backlash or slop in the height adjustment mechanism, allowing easier and smoother height adjustments.Extra-wide 22" conveyor properly supports stock over 19" wide.Drum will never go "out of alignment". Drum carriage is bolted to the base, preventing any movement or alignment issues.INTELLISAND Technology automatically adjusts conveyor speed based on load, preventing gouging, damaging or burning stock, providing consistent finish even with varying grain pattern and density, and greatly increasing abrasive planing and dimensioning speed.Precision-flattened steel conveyor bed is reinforced with four steel cross sections for no "flex" in conveyor, guaranteeing flatness to less than .010" across the width of the sander.Abrasive conveyor belt offers the best grip for raw wood, giving you the ability to accommodate stock that is very short or thin.Patented abrasive attachment system effectively tensions the abrasive wraps, preventing loose or overlapping abrasives.Easiest access to abrasive fastening system of any drum sander. Extra wide space to access fasteners to eliminate need for special tools.Self-cooling drum prevents overheating and extends abrasive life.Tension rollers are adjustable for height and hold down pressure, eliminating snipe.Metal dust cover is formed to shape of drum for optimum dust extraction.Heavy-duty cast iron construction for strength, rigidity and reduced vibration.

Jet Plus Drum Sander 1.5HP w/Open Stand

Jet Plus Drum Sander 1.5HP w/Open Stand
$1,119.99

The JET 16-32 Plus Drum Sander. Often imitated, never duplicated - this drum sander elevates the primary woodworking tasks of sanding from long and slow to short and fast, one may even venture to say fun. The unique design of the JET 16-32 Plus Drum Sander provides ample capacity to handle small and large jobs with ease. Add our exclusive SandSmart Technology that virtually eliminates workpiece or abrasive burn and you've got a great sander that will last for years to come. Put a JET 16-32 Plus Drum Sander in your shop - and you'll know why JET tools are Built Better to Build Better.Features:Sandsmart control continuously monitors the load on the drum motor and automatically regulates the speed of the conveyor motor to maintain the highest feed rate without overload Patented conveyor belt TRACKERS dramatically reduce the need for manual belt adjustmentsPrecision-machined and balanced extruded aluminum drum is self-cooling to protect the surface being sanded from heat-damage Sealed and permanently lubricated drum ball bearings for longer life Precision-flattened reinforced steel conveyor bed and no-give power feed belt provide a constant smooth sanding action for better results Adjustable drum height and downward pressure feature virtually eliminates snipe Top-position handwheel adjusts height at 1/16" per turn for precise sanding thickness control Patented abrasive take-up fasteners make changing abrasives quick and easy Infinitely variable-speed control produces the ultimate finish at a rate from 0 to 10 feet per minute On/off switch with overload protection is front-mounted for operator's convenience One feed and one drive motor for superior sanding control Continuous-duty, 1-1/2HP motor is designed for heavier use for longer periods of timeStandard Equipment One 80 grit abrasive strip One 100 grit abrasive conveyor belt TufTool TRACKERS Metal stand with shelf One box Ready-To-Wrap abrasives 4" dust port

Jet Combination 6'' x 48'' Belt & 9'' Disc Sander w/Closed Stand

Jet Combination 6'' x 48'' Belt & 9'' Disc Sander w/Closed Stand
$864.99

The unique JSG-96CS Sander combines a 9" disc and 6" x 48" belt for workshop versatility. While small and compact, the JSG-96 offers industrial 3/4 HP power while taking up a small footprint in your shop. A quick-release belt tension lever makes belt changes fast and easy while a quick-lock dust cover allows fast disc changes.Features:Large cast iron table has preset stops at 90° and 45° to let you use the belt sander vertically, horizontally or anywhere in between Exclusive dual thumbscrew belt tracking adjustment locks to keep belt on track during useGraphite covered steel platen runs cooler increasing machine and belt lifeSpecially designed belt guard allows full use of the 6" belt width and lengthDrive drum is rubber-coated for a better grip on the sanding belt resulting in less slippageTracking adjustment knob with quick-lock handle keeps belt on track during useQuick-release belt tension lever makes belt changes fast and easyQuick-lock dust cover allows fast disc changes Single 4" dust port on the back of the base collects dust effectively from both the belt and disc Powerful 3/4HP motor easily handles the toughest sanding operations Built-in handles for easier portability One-piece formed steel heavy-duty closed stand provides additional support and additional storage for abrasives

Jet Benchtop Sander 1HP

Jet Benchtop Sander 1HP
$764.99

This compact benchtop sander from JET may be small on size, but it's big on performance. The powerful 1HP motor will sand boards up to 3" thick and 20" wide; while the aluminum sanding drum is self-cooling to protect the sanding surface from heat damage. Whether you are a hobbyist or a craftsman who is just tight on shop space, this workhorse is sure to solve your sanding needs.Features:Infinitely variable-speed control produces the ultimate finish at a rate from 0 to 12 feet per minute and prevents machine overloadPatented conveyor belt Trackers dramatically reduce the need for manual belt adjustmentsPrecision-machined and balanced extruded aluminum drum is self-cooling to protect the surface being sanded from heat-damageSealed and permanently lubricated drum ball bearings for longer lifePrecision-flattened reinforced steel conveyor bed and no-give power feed belt provide a constant smooth sanding action for better resultsAdjustable drum height and downward pressure feature virtually eliminates snipeCast-iron handwheel adjusts height at 1/16" per turn for precise sanding thickness controlPatented abrasive take-up fasteners make changing abrasives quick and easyOn/off switch with overload protection is front-mounted for operator's convenienceOne feed and one drive motor for superior sanding controlContinuous-duty, 1HP motor is designed for heavier use for longer periods of timeStandard EquipmentOne 80 grit abrasive stripOne 100 grit abrasive conveyor beltTRACKERSVariable speed conveyorTUFTool4" dust port

Robert Sorby ProEdge Plus Sharpening System

Robert Sorby ProEdge Plus Sharpening System
$524.99

The Sorby ProEdge Plus does just what its name implies - puts a consistent, professional-quality edge on almost any hand tool, whether a turning tool, chisel, plane blade or knife. And don't be fooled by its compact size - weighing in at over 30 lbs, with a 1/4" steel plate, this is a true industrial-quality sharpener. The patented angle setter ensures that the most popular bevel angles can be set time after time, and the thick steel backing plate ensures a dead flat sharpening surface. The abrasive belts can be quickly changed for anything from rough sharpening to fine honing, and because the grit can be chosen for the quickest possible sharpening, there is far less risk of overheating your tools and damaging the steel. The ProEdge Plus includes a skew jig, a gouge jig, fingernail profiler and three different belts.Technical Details:Fixed detents for the most popular bevel angles: 90°, 80°, 60°, 45°, 35°, 30°, 25°, 20°, 15°.User can easily bypass the presets and set a custom angle.Sharpening is extremely rapid, so there is no fear of over-heating and consequently damaging your tools.Sharpening surface can be easily tilted back at any angle for maximum user comfort.No complex assembly required; the ProEdge is ready to use right out of the box.The ProEdge is a compact, well-engineered unit that can be located anywhere in the workshop.Use ProEdge aluminum oxide sharpening belts for bench and carving chisels, knives and plane irons.Use ProEdge zirconium sharpening belts for HSS turning tools, drill bits and router bits.Use ProEdge ceramic sharpening belts for rapid, heavy-duty sharpening.1/2 hp (375w) motor.700 ft (220m) per minute belt speed.To make sharpening even more accurate, the ProEdge Plus (26342) includes these accessories:A skew jig to give the correct presentation angle for turners' skew chisels.A gouge jig in the format of a V-block to prevent pivoting when sharpening a turners' gouge. This also works as a square jig for presenting square tools at 90 degrees to the sharpening belt. A fingernail profiler to create swept back wings on a turners' gouge.

Pages: 1 2 3 4 5 6 7 8 9 10next pagelast page