Pages: first pageprev page5 6 7 8 9 10 11 12 13 14next pagelast page

1x Miller Walnut Dowels, 40 Pack

1x Miller Walnut Dowels, 40 Pack
$14.99

Voted one of the hot new tools from the 2002 Show Circuit by Wood Magazine! Miller Dowel has reintroduced peg construction with distinct advantages over standard dowel construction.Select the best-sized Miller Dowel and corresponding Miller Dowel Drill Bit for your application. Align and secure the wood pieces to be joined. (You may even choose to glue and set all components in place.) Drill the stepped pilot hole for the dowel.*Spread a small amount of glue on the ribbed sections of the dowel and insert it so that it drops approximately two-thirds its length. (It will self-center and align with the 2nd board even if you have not preglued or clamped the components.)Tap the dowel until fully inserted.Trim/sand any raised portion.*The depth drilled determines the depth of insertion. This not only allows users to countersink, tap flush, or leave raised, but also gives woodworkers the option to only use a portion of the dowel.If only 2 ½ sections of the drill bit is used, then only 2 ½ sections of the dowel will be inserted. This technique doubles the versatility of the product because it means that each size Miller Dowel is two sizes in one. It is an ideal feature when depth or thickness is restrictive, or for achieving a decorative effect.The Miller Dowel is perfect for use in a wide variety of wood joining and fastening applications, such as furniture, decks/docks, stairs and hand railings, cabinets, windows and doors, toys and more! Helps you avoid the problems associated with nails and screws, such as wood rot, metal corrosion and rust, nail pops, and splitting of the grain. Choose from 1x, 2x or NEW Mini-X Quick Drill kits, which include stepped drill bit and 50 Birch dowels. Dowels available in three sizes: 1x for boards up to 1" thick, and 2x for boards up to 1-3/4" thick and NEW Mini-X for joining 1/2" stock. Drill bits fit 3/8" chuck. Additional packs of 25 dowels also available in birch, oak, cherry and walnut. Joining wood with wooden fasteners avoids the problems with nails and screws, such as Wood rot, of which even a minor amount compromises joint strength,1) Metal corrosion and rust2) Dangerous "Nail Pops" or "Shiners" 3) Splitting of the grain.Peg Construction traditionally involves the difficult task of driving a pin dowel into a pilot hole that is just as tight at the top as it is at the bottom. Not only do you have to use a hammer from the very beginning, but it only gets tougher the deeper you get!The MILLER Dowel is inserted 75% by hand because of the relationship of the dowel shape to its pilot hole. You get better holding strength, and it is easier to tap in! Another advantage of having the dowel inserted so far through the top board is that the pilot hole does not have a chance to misalign. The hole for a traditional dowel must be perfectly matched up so the dowel can enter the second piece of wood without problems.The MILLER Dowel is already well into the second piece of wood before you even reach for your hammer! The MILLER Dowel has exceptional holding strength because the shoulder between the widest and second widest sections gets lodged in the top board. This produces a capping effect like the head on a screw or a nail.This dowel has excellent adhesion as glue remains all along the MILLER Dowel's length, settling under each shoulder, instead of being forced down to the bottom of the hole or sheared off at the top. Many woodworkers appreciate the decorative appearance of the pegged or "Shaker" look. Since our dowels can be stained prior to insertion, it simple to enhance the contrast for both light and dark woods. Why use plugs to cover countersunk screws? Using plugs involves drilling a pilot hole, screwing in a fastener, then gluing and inserting the plug. Why not just skip a step by using a MILLER Dowel? Plus, you won't worry about the plugs falling out and disappearing.Our fit remains tight. Unlike nails or screws, wooden dowels are naturally flexible and dampen vibration. There is no compression of the surrounding wood, which would loosen the fit.The original intent for our product was to be a safety fastener. Injuries and damages caused by exposed nail/screw heads are prevented by using MILLER Dowels.MILLER Dowels introduce a new joinery technique that can be used instead of difficult, expensive, and/or very time consuming methods like blind dowels, biscuits, pocket screws, or mortise and tenon.There is one timesaving assembly technique that is made possible by MILLER Dowels. A Chicago woodworker developed this as an alternative to the mortise and tenon joinery in his furniture design.In this method, pieces of wood to be joined are simply glued and aligned. Once cured, the glue eliminates the need for a brace.Pilot holes are then drilled, and the dowels can then be inserted for structural support.Not only does this method guarantee perfectly flush joinery, but it takes 25% of the time!

1x Miller Cherry Dowels, 40 Pack

1x Miller Cherry Dowels, 40 Pack
$14.99

Voted one of the hot new tools from the 2002 Show Circuit by Wood Magazine! Miller Dowel has reintroduced peg construction with distinct advantages over standard dowel construction.Combo Offer Now get a 1X Miller Dowel System, Clamp-It and two Mini-Clampsfor one low price.Select the best-sized Miller Dowel and corresponding Miller Dowel Drill Bit for your application. Align and secure the wood pieces to be joined. (You may even choose to glue and set all components in place.) Drill the stepped pilot hole for the dowel.*Spread a small amount of glue on the ribbed sections of the dowel and insert it so that it drops approximately two-thirds its length. (It will self-center and align with the 2nd board even if you have not preglued or clamped the components.)Tap the dowel until fully inserted.Trim/sand any raised portion. *The depth drilled determines the depth of insertion. This not only allows users to countersink, tap flush, or leave raised, but also gives woodworkers the option to only use a portion of the dowel.If only 2 ½ sections of the drill bit is used, then only 2 ½ sections of the dowel will be inserted. This technique doubles the versatility of the product because it means that each size Miller Dowel is two sizes in one. It is an ideal feature when depth or thickness is restrictive, or for achieving a decorative effect.The Miller Dowel is perfect for use in a wide variety of wood joining and fastening applications, such as furniture, decks/docks, stairs and hand railings, cabinets, windows and doors, toys and more! Helps you avoid the problems associated with nails and screws, such as wood rot, metal corrosion and rust, nail pops, and splitting of the grain. Choose from 1x, 2x or NEW Mini-X Quick Drill kits, which include stepped drill bit and 50 Birch dowels. Dowels available in three sizes: 1x for boards up to 1" thick, and 2x for boards up to 1-3/4" thick and NEW Mini-X for joining 1/2" stock. Drill bits fit 3/8" chuck. Additional packs of 25 dowels also available in birch, oak, cherry and walnut. Joining wood with wooden fasteners avoids the problems with nails and screws, such as Wood rot, of which even a minor amount compromises joint strength,1) Metal corrosion and rust2) Dangerous "Nail Pops" or "Shiners" 3) Splitting of the grain.Peg Construction traditionally involves the difficult task of driving a pin dowel into a pilot hole that is just as tight at the top as it is at the bottom. Not only do you have to use a hammer from the very beginning, but it only gets tougher the deeper you get!The MILLER Dowel is inserted 75% by hand because of the relationship of the dowel shape to its pilot hole. You get better holding strength, and it is easier to tap in! Another advantage of having the dowel inserted so far through the top board is that the pilot hole does not have a chance to misalign. The hole for a traditional dowel must be perfectly matched up so the dowel can enter the second piece of wood without problems.The MILLER Dowel is already well into the second piece of wood before you even reach for your hammer! The MILLER Dowel has exceptional holding strength because the shoulder between the widest and second widest sections gets lodged in the top board. This produces a capping effect like the head on a screw or a nail.This dowel has excellent adhesion as glue remains all along the MILLER Dowel's length, settling under each shoulder, instead of being forced down to the bottom of the hole or sheared off at the top. Many woodworkers appreciate the decorative appearance of the pegged or "Shaker" look. Since our dowels can be stained prior to insertion, it simple to enhance the contrast for both light and dark woods. Why use plugs to cover countersunk screws? Using plugs involves drilling a pilot hole, screwing in a fastener, then gluing and inserting the plug. Why not just skip a step by using a MILLER Dowel? Plus, you won't worry about the plugs falling out and disappearing.Our fit remains tight. Unlike nails or screws, wooden dowels are naturally flexible and dampen vibration. There is no compression of the surrounding wood, which would loosen the fit.The original intent for our product was to be a safety fastener. Injuries and damages caused by exposed nail/screw heads are prevented by using MILLER Dowels.MILLER Dowels introduce a new joinery technique that can be used instead of difficult, expensive, and/or very time consuming methods like blind dowels, biscuits, pocket screws, or mortise and tenon.There is one timesaving assembly technique that is made possible by MILLER Dowels. A Chicago woodworker developed this as an alternative to the mortise and tenon joinery in his furniture design.In this method, pieces of wood to be joined are simply glued and aligned. Once cured, the glue eliminates the need for a brace.Pilot holes are then drilled, and the dowels can then be inserted for structural support.Not only does this method guarantee perfectly flush joinery, but it takes 25% of the time!

X-Treme Tape for Dust Joints

X-Treme Tape for Dust Joints
$14.99

No Clamps Needed! Attaches and seals dust hose! Sealing the joints in your dust collection system just got easier. X-Treme Tape stretches and bonds to itself to make an air-tight seal for plastic and metal dust joints, ducts, tool grips and more. Connect and seal dust joints and accessories without clamps. One 20' roll seals approximately 15 dust joints. X-Treme Tape contains no adhesive and won't leave a sticky residue. Measures 1-1/2" wide.Features:Remains flexible to -60°FWon't melt up to 500°FBond is complete after 24 hours at room temperatureOne 20' roll seals approximately 15 dust jointsContains no adhesive and won't leave a sticky residue

Pen Mill Barrel Trimmers

Pen Mill Barrel Trimmers
$14.99

Clear excess adhesive from your pen tubes and square up the ends of your pen in one easy step! These Pen Mill Barrel Trimmers measure 7/8" long and include hex wrenches for adjustment and replacement. They feature double hex-head screws for a secure connection to the Pilot Shaft.

Quick-Set Glue- 4.5 oz

Quick-Set Glue- 4.5 oz
$14.99

Quick-Set CA glue (cyanoacrylate adhesive) has a clear, fast cure and strong bond for a variety of materials, including wood, metal, glass, rubber, ceramics and plastic.Choose a viscosity that does not absorb completely into the surfaces to be bonded.CA-Thin has fast setting and curing for relatively non-porous surfaces.CA-Medium is a great general-purpose adhesive that penetrates porous wood to harden and seal surfaces.CA-Thick has good filling characteristics for larger cracks and uneven surface bonding.CA-Flexible has extremely good bond strength that retains a flexible condition when cured, making it ideal for pen making or wood to metal applications.

Self-Adhesive Velvet-Choose velvet color

Self-Adhesive Velvet-Choose velvet color
$14.99

Create a beautiful box liner in minutes. High quality velvet in deep luxurious colors makes a scratch-free box liner. Self adhesive backing. Approximately 1/32" thick. 3 easy steps to apply: Cut to size; remove peel and stick backing; burnish with roller. Sheet measures 12" x 24". Click on "More Images" to see additional colors.

Peel-and-Stick Edge Banding “ 25' Rolls

Peel-and-Stick Edge Banding “ 25' Rolls
$14.99

The easiest possible way to install solid wood edge banding just peel and stick! No need for an expensive edge bander; bandings are impregnated with a premium 3M peel-and-stick adhesive that creates a permanent bond. The bandings are also pre-sanded and readily accept stains and finishes. Suitable for straight-line edges as well as contours. Made from premium veneers.Features:PSA (Pressure Sensitive Adhesive) Edge Banding allows you to apply edging without expensive edge banders or other tools.Wood edgings are made of solid hardwood veneer.Available in a variety of wood species some of them difficult to find in edge bandings.

Loctite Spray Adhesive

Loctite Spray Adhesive
$13.99

This heavy-duty adhesive sprays on quickly, eliminating the sticky mess of brushes and cans. Simple to use; just apply a medium coat to both surfaces, wait one minute and bond. Originally developed for demanding applications like home construction, remodeling and marine use, it forms a high-strength bond at all temperatures, both indoors and out. Great for laminates, trim, kick plates, signage, carpeting and upholstery. Adjustable nozzle allows user to select low, medium or heavy adhesive application. Dries clear. Resistant to water and humidity.Technical Details:Easy spray applicationAdjustable nozzle allows user to select low, medium or heavy adhesive application.Dries clear.Resistant to water and humidity.No bleed-through, wrinkling or curling of paper.For heavy-duty permanent bonding, apply a double coat to both surfaces. Let first coat dry to a tack before applying second coat - usually 2-5 minutes. Wait one minute after final coat and bond.Please note that this item can only be shipped to addresses within the continental United States by UPS Ground only.

Mini-Flocker Suede-Tex Fibers

Mini-Flocker Suede-Tex Fibers
$13.99

It's easy to apply a durable, professional looking interior liner that resembles velvet. Just apply the undercoat adhesive and then spray on the fibers. Adhesive covers approximately 10-12 square feet. You will need both adhesive (Sold Separately) and fibers as well as the Mini-Flocker Applicator to apply suede textures to a surface. Squeeze the tube to spray Suede Tex fibers. Using a separate tube for each color is recommended. Adhesive: 8 oz.Fiber: 3 oz.

Mini-Flocker Suede-Tex Adhesives

Mini-Flocker Suede-Tex Adhesives
$13.99

It's easy to apply a durable, professional looking interior liner that resembles velvet. Just apply the undercoat adhesive and then spray on the fibers. Adhesive covers approximately 10-12 square feet. You will need both adhesive and fibers (sold separately) as well as the Mini-Flocker Applicator to apply suede textures to a surface. Squeeze the tube to spray Suede Tex fibers. Using a separate tube for each color is recommended. Adhesive: 8 oz.Fiber: 3 oz.

Rockwell Sonicrafter Finger-Shaped Carbide Grit Rasp

Rockwell Sonicrafter Finger-Shaped Carbide Grit Rasp
$13.49

The RW8924 Carbide Rasp excels at rasping, etching or cutting wood, hardened adhesives, thin set and masonry. With its narrow profile, it's ideal for spot treatment, or for working in tight quarters. The coarse abrasive removes material aggressively for fast removal, even over larger areas. Universal Fit System also allows it to be used with almost any other multi-tool.Technical Details:Use the RW8924 Carbide Rasp to rasp, cut or etch wood, hardened adhesives,thin set and masonry.Narrow profile is ideal for tight quarters and spot treatment.Aggressive grit removes material quickly over larger areas.Use with Rockwell Sonicrafter Multi-Tools RK5139K (46768)and RK5140K (48783). Universal fit system adapts to fit other multi-tool brands.Blade Dimensions, 2.85"L x 1.45"W x 0.30"H.

Titebond WW60 Polyurethane Hot Melt Adhesive

Titebond WW60 Polyurethane Hot Melt Adhesive
$12.99

Titebond WW60 is the adhesive component used with the Titebond HiPurformer Hot Melt Glue Gun. This thicker formulation is designed for wood and wood-composite projects and is ideal for application where gap filling properties are needed. With a fast set time, it eliminates the need for nails, staples, screws and other mechanical fasteners (in most applications), yet it is ideal for assembly applications where longer open times are desired.High-strength, permanent bonds and fast set - 60 secondsInterior/Exterior - WaterproofGreatly reduces or eliminates mechanical fasteners in many applicationsSolvent free and nonflammableVersatile performanceTrim & molding, chair rails, cabinetry and case goodsBirdhouses, planters, furniture and other outdoor applicationsUV indicator for easy cleanupGap fillingTechnical Details:Product Size: 50 gram cartridgeWeight: 2.44 lbs.Color: TranslucentViscosity: 12,000 (cps) at 250° FDried Film: Opaque WhiteBond Strength after 10 minutes: 600 psiBond Strength after 1 hour: 1,130 psiBond Strength after 24 hours: 1,480 psi

Titebond MP75 Polyurethane Hot Melt Adhesive

Titebond MP75 Polyurethane Hot Melt Adhesive
$12.99

Titebond MP75 is the adhesive component used with the Titebond HiPurformer Hot Melt Glue Gun. This special adhesive is extremely versatile and designed for use on a wide variety of materials. With a fast set time, it eliminates the need for nails, staples, screws and other mechanical fasteners (in most applications), yet it is ideal for assembly applications where longer open times are desired.High-strength, permanent bonds and fast set - 75 secondsInterior/Exterior - WaterproofAdheres to Melamine, FRP, ceramics, metals and most common substratesGreatly reduces or eliminates mechanical fasteners in many applicationsSolvent free and nonflammableVersatile performanceTrim & molding, chair rails, cabinetry and case goodsBirdhouses, planters, furniture and other outdoor applicationsUV indicator for easy cleanupTechnical Details:Product Size: 50 gram cartridgeWeight: 2.44 lbs.Color: TranslucentViscosity: 9,500 (cps) at 250° FDried Film: Opaque WhiteBond Strength after 10 minutes: 270 psiBond Strength after 1 hour: 600 psiBond Strength after 24 hours: 900 psi

Woodworker's Pocket Reference, Second Edition, Book

Woodworker's Pocket Reference, Second Edition, Book
$12.99

Conveniently sized to fit a shop apron, this handy DIY reference is packed with helpful tips and answers to all of your woodworking questions in an easy-to-read format. Everything is here, and easily accessible: information on wood, fasteners, joints, shop math, finishing, hand tools, power tools, shop set up, sharpening, safety, and much more. Details on the availability and use of various kinds of wood, hand and motorized tools, glues, wood fillers, and adhesives are provided along with pointers on sharpening edges, concocting effective solvents, and creating an efficient workspace. Charts, formulas, conversion tables, and geometry pointers are available to refresh the forgetful craftsman, and a comprehensive glossary offers rapid access to a wealth of information. Winner of the Golden Hammer Book Award. Paperback. 216 pages. About the Author: Charlie Self is an award-winning writer who has contributed a vast amount of work to the woodworking field. Charlie is the author of dozens of woodworking books, has written more than a thousand articles for woodworking magazines, and has edited and consulted for McGraw-Hill, Time-Life, and Popular Mechanics.

Norton Rapid Strip Depressed Center Non-Woven Disc, 4-1/2'' Dia. x 5/8-11 Hub, Coarse

Norton Rapid Strip Depressed Center Non-Woven Disc, 4-1/2'' Dia. x 5/8-11 Hub, Coarse
$12.99

Rapid strip discs offer a semi-flexible open web design that resists loading, conforms to edges, contours and uneven surfaces without gouging, and runs more quietly. The abrasive is uniformly distributed and bonded throughout the wheel for aggressive removal of paint, rust, coatings, light edge burrs, parting lines and flashing. Extruded nylon fibers, flexible resin technology and durable abrasives come together in a disc that outperforms traditional coated abrasive products. Both the face and edge of the wheel can be used. Use with an angle grinder for removal of paint, rust, coatings, light edge burrs, parting lines and flashingDiscard mount for easy wheel changesType 27 wheel shape (essentially flat with a depressed center) Benefits of Non-Woven Discs vs. Fiber Discs, Wire Wheels, and Grinding Wheels: Deburring, blending and finishing can be done with one productPrevents undercutting and gougingProvides a cooler grinding action to lessen the chance of warping or discolorationReduces loading when working with fiberglass, adhesives and soft metalsExcels at stripping coatings and paint off of hard materials like concrete, cement and stoneLess vibration and less noiseSafer than wire wheels

Titebond Instant Bond Wood Adhesive - Medium Viscosity

Titebond Instant Bond Wood Adhesive - Medium Viscosity
$12.99

These high-performance CA glues (cyanoacrylate adhesives) take just 5-15 seconds to set and 30-60 seconds for initial cure. For even faster adhesion, the Instant Bond Activator cuts set time nearly in half! Designed primarily for wood and wood products, these adhesives also provide strong, permanent bonds in a wide variety of materials and substrates.7-Second Handling Time5-Second Set TimeDesigned to fill knots and voids.

Unfinished Alder 9/16" Screw Caps

Unfinished Alder 9/16" Screw Caps
$12.99

Set yourself apart...Fastcap screw caps are the finishing touch to a professional job! These self-adhesive cover caps are made with high performance acrylic Ultra-Bond PSA adhesive which increases in strength as it cures, providing a long lasting permanent bond. They are fast and easy to install and adhere well to almost any surface. Made of durable PVC, unfinished wood and pre-finished real wood, they work in a wide variety of applications, like covering screw holes and RTA fittings.

Unfinished Pecan 9/16" Screw Caps

Unfinished Pecan 9/16" Screw Caps
$12.99

Set yourself apart...Fastcap screw caps are the finishing touch to a professional job! These self-adhesive cover caps are made with high performance acrylic Ultra-Bond PSA adhesive which increases in strength as it cures, providing a long lasting permanent bond. They are fast and easy to install and adhere well to almost any surface. Made of durable PVC, unfinished wood and pre-finished real wood, they work in a wide variety of applications, like covering screw holes and RTA fittings.

Pages: first pageprev page5 6 7 8 9 10 11 12 13 14next pagelast page