Pages: first pageprev page2 3 4 5 6 7 8 9 10 11next pagelast page

T-88 Structural Epoxy

T-88 Structural Epoxy
$25.99

Specially designed to hold up against water, gasoline and most chemicals. Forms a tough, permanent, non-brittle bonds on most clean surfaces. Dries to a clear amber that is virtually invisible when varnished. Contains two 4 ounce bottles.

Mini-X Quick Drill Kit

Mini-X Quick Drill Kit
$25.99

Voted one of the hot new tools from the 2002 Show Circuit by Wood Magazine! Miller Dowel has reintroduced peg construction with distinct advantages over standard dowel construction.Select the best-sized Miller Dowel and corresponding Miller Dowel Drill Bit for your application. Align and secure the wood pieces to be joined. (You may even choose to glue and set all components in place.) Drill the stepped pilot hole for the dowel.*Spread a small amount of glue on the ribbed sections of the dowel and insert it so that it drops approximately two-thirds its length. (It will self-center and align with the 2nd board even if you have not preglued or clamped the components.)Tap the dowel until fully inserted.Trim/sand any raised portion.*The depth drilled determines the depth of insertion. This not only allows users to countersink, tap flush, or leave raised, but also gives woodworkers the option to only use a portion of the dowel.If only 2 ½ sections of the drill bit is used, then only 2 ½ sections of the dowel will be inserted. This technique doubles the versatility of the product because it means that each size Miller Dowel is two sizes in one. It is an ideal feature when depth or thickness is restrictive, or for achieving a decorative effect.The Miller Dowel is perfect for use in a wide variety of wood joining and fastening applications, such as furniture, decks/docks, stairs and hand railings, cabinets, windows and doors, toys and more! Helps you avoid the problems associated with nails and screws, such as wood rot, metal corrosion and rust, nail pops, and splitting of the grain. Choose from 1x, 2x or NEW Mini-X Quick Drill kits, which include stepped drill bit and 50 Birch dowels. Dowels available in three sizes: 1x for boards up to 1" thick and 2x for boards up to 1-3/4" thick and NEW Mini-X for joining 1/2" stock. Drill bits fit 3/8" chuck. Additional packs of 25 dowels also available in birch, oak, cherry and walnut. Joining wood with wooden fasteners avoids the problems with nails and screws, such as Wood rot, of which even a minor amount compromises joint strength,1) Metal corrosion and rust2) Dangerous "Nail Pops" or "Shiners"3) Splitting of the grain.Peg Construction traditionally involves the difficult task of driving a pin dowel into a pilot hole that is just as tight at the top as it is at the bottom. Not only do you have to use a hammer from the very beginning, but it only gets tougher the deeper you get!The MILLER Dowel is inserted 75% by hand because of the relationship of the dowel shape to its pilot hole. You get better holding strength, and it is easier to tap in! Another advantage of having the dowel inserted so far through the top board is that the pilot hole does not have a chance to misalign. The hole for a traditional dowel must be perfectly matched up so the dowel can enter the second piece of wood without problems.The MILLER Dowel is already well into the second piece of wood before you even reach for your hammer! The MILLER Dowel has exceptional holding strength because the shoulder between the widest and second widest sections gets lodged in the top board. This produces a capping effect like the head on a screw or a nail.This dowel has excellent adhesion as glue remains all along the MILLER Dowel's length, settling under each shoulder, instead of being forced down to the bottom of the hole or sheared off at the top. Many woodworkers appreciate the decorative appearance of the pegged or "Shaker" look. Since our dowels can be stained prior to insertion, it simple to enhance the contrast for both light and dark woods. Why use plugs to cover countersunk screws? Using plugs involves drilling a pilot hole, screwing in a fastener, then gluing and inserting the plug. Why not just skip a step by using a MILLER Dowel? Plus, you won't worry about the plugs falling out and disappearing.Our fit remains tight. Unlike nails or screws, wooden dowels are naturally flexible and dampen vibration. There is no compression of the surrounding wood, which would loosen the fit.The original intent for our product was to be a safety fastener. Injuries and damages caused by exposed nail/screw heads are prevented by using MILLER Dowels.MILLER Dowels introduce a new joinery technique that can be used instead of difficult, expensive, and/or very time consuming methods like blind dowels, biscuits, pocket screws, or mortise and tenon.There is one timesaving assembly technique that is made possible by MILLER Dowels. A Chicago woodworker developed this as an alternative to the mortise and tenon joinery in his furniture design.In this method, pieces of wood to be joined are simply glued and aligned. Once cured, the glue eliminates the need for a brace.Pilot holes are then drilled, and the dowels can then be inserted for structural support.Not only does this method guarantee perfectly flush joinery, but it takes 25% of the time!

10-LED Anywhere Sensor Light

10-LED Anywhere Sensor Light
$25.99

Without routing a single power cord or wiring any switches, you can bring bright, eye-pleasing light to the most dimly-lit areas of your house. The perfect fast fix for use under sinks and cabinets, in attics, storage sheds and closets—any space that needs light without the expense of an electrician. LED Floodlight Technology with ultra-bright, glare-free, ultra-wide beamInstalls quickly with supplied adhesive tabs or screws and angled mounting bracketEnergy-efficient LEDs never need replacementChoice of manual on/off or motion sensor on/off with 30- or 60-second timerRequires (3) AA batteries (not included)

Quick Cure 5-Minute Epoxy

Quick Cure 5-Minute Epoxy
$24.99

Get permanent repairs on wood, fiberglass, concrete, ceramics, glass, leather and plastics in only five minutes! Easy to measure, solvent free. 8 oz.

Fein MultiMaster Carbide Finger Rasp

Fein MultiMaster Carbide Finger Rasp
$24.99

For rough sanding of filler, tile adhesives, concrete, stone and wood. The finger shape, coated on both sides, is especially well suited for artistic work.

Deft Waterborne Clear Wood Finish

Deft Waterborne Clear Wood Finish
$24.99

This is a waterborne 100%acrylic finish that dries to the touch in just 30 minutes. It has very little odor, cleans up with soap and water and boasts the performance of lacquer in a water-based acrylic formula. Goes on crystal clear and will not yellow over time. Application is easy with a brush, pad, roller or spray gun. Provides good resistance to water, alcohol and stains, and boasts excellent adhesion to both finished and unfinished items. Self-leveling formula. Superior durability with strong mar resistance. Quart. Semi-Gloss.Lends a deep, rich look to interior wood, furniture, cabinetry, paneling, antiques, wicker and crafts. Works well on rose woods and other exotic hardwoods.Dries to touch in 30 minutes.Apply thin coats to avoid drips and runs.Allow 2 hours dry-time between coats.3 coats recommended.If thinning is needed, use water.Cleanup with soap and water.Allow 8 hours before light use.Not recommended for wood floors or exterior use.Do not apply over a stearated lacquer sealer.Coverage: up to 100 sq. ft.

WEST SYSTEM Epoxy-Hardener

WEST SYSTEM Epoxy-Hardener
$24.99

Highly trusted by boat-builders, WEST SYSTEM Epoxy is ideal for use as an ultra-tough waterproof coating, a high-strength, gap-filling adhesive or an easily sanded surface filler. The Resin works in conjunction with a variety of WEST SYSTEM Hardeners, Fillers and Pumps for a wide range of applications.The 105 Epoxy Resin is the base material of the WEST SYSTEM family. A clear, pale yellow, low-viscosity resin, 105 forms a high-strength solid with excellent moisture resistance, and is designed specifically for wood fiber, fiberglass, reinforcing fabrics and a variety of metals. 105 Resin105 Resin viscosity is approximately 1000 cP (centipoise) at 72°F (22°C).Coverage for "A" resin containers: Porous surfaces: 90-105 sq. ft. (8.5-10m2)Non-porous surfaces: 120-135 sq. ft. (11-12.5 m2)Coverage for "B" resin containers: Porous surfaces: 350-430 sq. ft. (32-40 m2)Non-porous surfaces: 462-550 sq. ft. (43-50 m2)Combined with 205 Fast, 206 Slow and 209 Extra-Slow Hardeners, the cure time of 105 can be fine-tuned and adjusted for a wide range of temperatures. For coating and roller applications, it can be combined with 207 Coating Hardener, which provides excellent thin-film characteristics to flow out and self-level without "fisheyeing." Cures clear to light amber, so you can achieve a natural wood finish when coating with varnish. 205 Fast HardenerPot life at 72°F (22°C) - 9 to 12 minutes.Cure to a solid state - 6 to 8 hours.Cure to maximum strength - 1 to 4 days.Minimum recommended temperature - 40°F (4°C).206 Slow HardenerPot life at 72°F (22°C) - 20 to 25 minutes.Cure to a solid state - 9 to 12 hours.Cure to maximum strength - 1 to 4 days.Minimum recommended temperature - 60°F (16°C).209 Extra-Slow HardenerPot life at 72°F (22°C) - 40 to 50 minutes.at 95°F (35°C) - 15 to 20 minutes.Cure to a solid state at 72°F (22°C) - 20 to 24 hours. at 95°F - 6 to 8 hours(35°C).Cure to maximum strength at 72°F - 4 to 9 days.Minimum recommended temperature - 70°F (21°C).206 Coating HardenerPot life at 72°F (22°C) - 22 to 27 minutes.Cure to a solid state - 9 to 12 hours.Cure to maximum strength - 4 to 7 days.Minimum recommended temperature - 60°F (16°C).When combined with 404 High Density Filler (optimum strength) 407 Low Density Filler (optimum volume) or 406 Colloidal Silica Filler (optimum versatility), WEST SYSTEM epoxy will bridge large gaps and voids and can be easily sanded and shaped when cured. It has no strong solvent odor, making it far safer and more pleasant to work with. Round out your set with the 300 Mini Pump Set, which includes one resin and two hardener pumps calibrated to dispense perfect ratios every time. Pumps mount directly on the resin and hardener containers, eliminating mess, and include extension tubes for various container sizes. NOTE: "A" and "B" sized resin containers correspond with "A" and "B" sized hardener containers. The 300 Mini Pumps can be configured to fit any size.

Peel-and-Stick Edge Banding “ 50' Rolls

Peel-and-Stick Edge Banding “ 50' Rolls
$24.99

The easiest possible way to install solid wood edge banding just peel and stick! No need for an expensive edge bander; bandings are impregnated with a premium 3M peel-and-stick adhesive that creates a permanent bond. The bandings are also pre-sanded and readily accept stains and finishes. Suitable for straight-line edges as well as contours. Made from premium veneers.Features:PSA (Pressure Sensitive Adhesive) Edge Banding allows you to apply edging without expensive edge banders or other tools.Wood edgings are made of solid hardwood veneer.Available in a variety of wood species some of them difficult to find in edge bandings.

The Complete Guide to Joint-Making, Book

The Complete Guide to Joint-Making, Book
$24.95

Strong, appropriate, and well-fitting joints are one of the hallmarks of the skilled woodworker. Making them properly requires intelligent planning, accurate layout, and a sufficient degree of care in cutting, fitting, and final assembly. That's the approach author John Bullar pursues in this essential guide. He walks readers through choosing the appropriate joint for its intended purpose and continues methodically through constructing and finally assembling the finished pieces. He also covers lumber selection, tools, and adhesives, and offers recommendations for the working methods and habits that are needed to achieve consistently good results. 176 pages. About the Author: John Bullar designs and makes bespoke furniture to commission from his workshop in Cheshire, in northwest England. His unique style is a combination of the Arts and Crafts methods handed down to him by his grandfather and his own contemporary re-interpretation of it. John is a prolific contributor to many woodworking magazines and the author of Cabinetmaking: A Foundation Course.

Select Cherry PVC 15/16" Peel & Stick Edge Banding, 50' Roll

Select Cherry PVC 15/16" Peel & Stick Edge Banding, 50' Roll
$23.99

Fastedge is a peel-and-stick edge banding made with high-performance, ultra-bond PSA adhesive. It is fast, easy, super strong and increases in strength over time. Simply peel off the liner, stick, roll and trim and you are done!

Natural Oak PVC 15/16" Peel & Stick Edge Banding, 50' Roll

Natural Oak PVC 15/16" Peel & Stick Edge Banding, 50' Roll
$23.99

Fastedge is a peel-and-stick edge banding made with high-performance, ultra-bond PSA adhesive. It is fast, easy, super strong and increases in strength over time. Simply peel off the liner, stick, roll and trim and you are done!

Knotty Pine PVC 15/16" Peel & Stick Edge Banding, 50' Roll

Knotty Pine PVC 15/16" Peel & Stick Edge Banding, 50' Roll
$23.99

Fastedge is a peel-and-stick edge banding made with high-performance, ultra-bond PSA adhesive. It is fast, easy, super strong and increases in strength over time. Simply peel off the liner, stick, roll and trim and you are done!

Hard Rock Maple PVC 15/16" Peel & Stick Edge Banding, 50' Roll

Hard Rock Maple PVC 15/16" Peel & Stick Edge Banding, 50' Roll
$23.99

Fastedge is a peel-and-stick edge banding made with high-performance, ultra-bond PSA adhesive. It is fast, easy, super strong and increases in strength over time. Simply peel off the liner, stick, roll and trim and you are done!

Manitoba Maple PVC 15/16" Peel & Stick Edge Banding, 50' Roll

Manitoba Maple PVC 15/16" Peel & Stick Edge Banding, 50' Roll
$23.99

Fastedge is a peel-and-stick edge banding made with high-performance, ultra-bond PSA adhesive. It is fast, easy, super strong and increases in strength over time. Simply peel off the liner, stick, roll and trim and you are done!

Natural Cherry PVC 15/16" Peel & Stick Edge Banding, 50' Roll

Natural Cherry PVC 15/16" Peel & Stick Edge Banding, 50' Roll
$23.99

Fastedge is a peel-and-stick edge banding made with high-performance, ultra-bond PSA adhesive. It is fast, easy, super strong and increases in strength over time. Simply peel off the liner, stick, roll and trim and you are done!

Turning Pens with Kip & Rex, DVD, Vol. 1 & 2

Turning Pens with Kip & Rex, DVD, Vol. 1 & 2
$20.99

The most comprehensive information available on making pens on a wood lathe!DVDs feature instruction by Rex Burningham and Kip Christensen, the authors of Turning Pens and Pencils.Video 1: The Basics and Beyond covers the fundamentals of pen making, how to make the basic Slimline pen, tools and usage, adhesives, and materials. 68 minutes.Video 2: More Pens plus Tips & Tricks features the European style pen, American rollerball/fountain pen, turning plastic and antler, and tips and tricks (sliding table for crosscutting, drilling jigs and tips, barrel trimmers, repairing defects in wood, assembly jigs and tips, and more). 88 minutes.

Black PVC 15/16" Peel & Stick Edge Banding, 50' Roll

Black PVC 15/16" Peel & Stick Edge Banding, 50' Roll
$20.99

Fastedge is a peel-and-stick edge banding made with high-performance, ultra-bond PSA adhesive. It is fast, easy, super strong and increases in strength over time. Simply peel off the liner, stick, roll and trim and you are done!

White PVC 15/16" Peel & Stick Edge Banding, 50' Roll

White PVC 15/16" Peel & Stick Edge Banding, 50' Roll
$20.99

Fastedge is a peel-and-stick edge banding made with high-performance, ultra-bond PSA adhesive. It is fast, easy, super strong and increases in strength over time. Simply peel off the liner, stick, roll and trim and you are done!

Pages: first pageprev page2 3 4 5 6 7 8 9 10 11next pagelast page