Pages: first pageprev page5 6 7 8 9 10 11 12 13 14next pagelast page

Bench Cookie Plus Master Kit

Bench Cookie Plus Master Kit
$59.99

Use Bench Cookie Plus Work Grippers alone on the bench to grip and protect your workpieces, or use them with the included standard risers and XL risers to fix them to your dog holes or to allow space for a router bit or jigsaw blade beneath the workpiece. The Master Kit even includes eight Bench Cookie Finishing Cones the perfect perches for your projects while spraying or finishing. Everything you need to grip and protect your work piece in your shop or on the job site! Bench Cookie Plus Master Kit Includes:(8) Bench Cookie Plus Work Grippers(8) XL Risers(4) Standard Risers(8) Bench Cookie Finishing Cones Bench Cookie Plus Work Grippers:Features a 5/16-18 threaded insert.Bench Cookie Plus measures 3" x 1".Threaded insert accepts standard and XL Risers.Rout, sand, cut and carve without using clamps.Raise up workpieces for easy edge finishing.Support projects without leaving marks.Assemble projects on a stable, non-slip base.Set up quickly for any application. Bench Cookie Standard and XL Risers:Standard Risers double the height of your Bench Cookie Plus Work Grippers.XL Risers triple the height of your Bench Cookie Plus Work Grippers.Raise workpieces for work with saws and other shop tools that require extra height.Both sizes fit 3/4" bench dog holes or 3/4" holes drilled into sawhorses or other fixtures. Bench Cookie Finishing Cones:Engineered to fit snugly over any Bench Cookie Work Grippers.Finish both sides of a project without slipping or sliding.Minimal surface contact.Won't ruin your finish or mar your wood.Nest for easy storage.Protect your Bench Cookie Work Gripper pads from paint and other finish products.

Portable Tablet Mount for Tables - by Upper Desk

Portable Tablet Mount for Tables - by Upper Desk
$59.95

This hands-free holder lets you refer to your tablet or smartphone while you work in the kitchen or workshop. Use it to keep recipes, cut lists, diagrams or downloaded instructions easily viewable, and at eye level, or just to tune in to the news as you work. Unlike screw-mounted tablet holders, it can be moved from place to place with ease using the fast-action mounting clamp. And unlike freestanding units, it won't take up counter space. The mount can be pivoted up to 180°, the height easily adjusted, and your tablet positioned in three tilt slots to provide the best viewing angle from multiple positions, and to minimize glare. 2'' overhang required. Also available in a Cabinet Mount version (52119, sold separately). Installs easily and removes in seconds - no tools neededAttaches to almost any table, shelf or island with at least 2'' of overhangFits 4''-14'' smartphones, tablets and e-readers; case compatibleProtects your technology investment by raising it off of the work surface and protecting it from spills and other debrisLocks to secure your device-more stable than similar productsHolds device either horizontally or verticallyEasily adjustable to reduce glareSwivels 180° for optimal viewingThree tilt angle settingsConstructed of durable powder coated metal and high density plasticArrives fully assembledComplete instructions included1-year Manufacturer's Warranty Upper Desk's Portable Tablet Mount was recognized by the International Housewares Association (IHA) as a 2014 IHA Innovation Award Finalist.

Portable Tablet Mount for Cabinets - by Upper Desk

Portable Tablet Mount for Cabinets - by Upper Desk
$59.95

This hands-free holder lets you refer to your tablet or smartphone while you work in the kitchen or workshop. Use it to keep recipes, cut lists, diagrams or downloaded instructions easily viewable, and at eye level, or just to tune in to the news as you work. Unlike screw-mounted tablet holders, it can be moved from place to place with ease using the fast-action mounting clamp. And unlike freestanding units, it won't take up counter space. The mount can be pivoted up to 180°, the height easily adjusted, and your tablet positioned in three tilt slots to provide the best viewing angle from multiple positions, and to minimize glare. Also available in a Table Mount version (51058, sold separately). Installs easily and removes in seconds - no tools neededAttaches to almost any upper cabinet or shelf-no drilling requiredCabinet door closes directly over the tablet mount clamp with no interferenceFits 4''-14'' smartphones, tablets and e-readers; case compatibleProtects your technology investment by raising it off of the work surface and protecting it from spills and other debrisLocks to secure your device-more stable than similar productsHolds device either horizontally or verticallyEasily adjustable to reduce glareSwivels 180° for optimal viewingThree tilt angle settingsConstructed of durable powder coated metal and high density plasticArrives fully assembledComplete instructions included1-year Manufacturer's Warranty Upper Desk's Portable Tablet Mount was recognized by the International Housewares Association (IHA) as a 2014 IHA Innovation Award Finalist.

Rockler Sure-Hook 360, 12 Pack

Rockler Sure-Hook 360, 12 Pack
$57.99

Improves on the original with 360° of swivel action, allowing you to spray all sides of your door without having to walk around or lift it off the rod to rotate it. Just grip the black section of the arm and give it a twist. Since you always spray from the same point, you'll be able to spot flaws easily without readjusting your lighting. The larger hook fits perfectly around standard 3/4" ID pipe, which makes a handy, stable hanging rod. Expandable cam-action plug fits into any 35mm hinge hole and secures by simply pivoting the arm 90°.Simply insert the 35mm cam-action locking plug into the door's hinge cup hole. To lock the plug in place, just rotate the pivoting arm so it's parallel to the door face. You can even easily adjust the plug for varying tolerances in 35mm bits using an Allen wrench (not included).Finish all sides at once - no need to wait and flip.A perfect application - no fingerprints or dents from nail-boards.With good air circulation on all sides of the door, your finish will dry faster.35mm plug adjusts to accommodate varying tolerances in 35mm bits.Fits shallow 9mm deep cup holes and standard 13mm deep cup holes.Works with standard 3/4" ID pipe - the same stuff used in pipe clamps.Opening in hook is approximately 1-1/16" wide.Overall length is approximately 8-5/8" in closed position.Sold individually.Patent Pending.

Rockler 45° Lock Miter Router Bits - 1/2'' Shank

Rockler 45° Lock Miter Router Bits - 1/2'' Shank
$57.99

The interlocking fingers of our Lock Miter Router Bit provide a strong mechanical locking action that makes it much easier to clamp. There is no tendency for the joint to slide out of alignment under clamping pressure, and the wedged tenons tighten up nicely for a strong corner joint. The increased long grain gluing surface also helps to strengthen the joint over a basic rabbet or butt joint. Machining parts with the Lock Miter Bit is easy''with the bit height set, one part is cut horizontally on the router table, while the corresponding part is cut vertically. The bit is ideal for joining drawer boxes, cabinet parts, and for building 4-sided columns.Note: To make setting the cutter height easy and fool-proof (Applicable for Item 22627), use the Rockler Router Bit Set-up Jig (53817, sold separately) to center the bit on your stock.

Irwin SL300 Quick-Grip Clamp Set

Irwin SL300 Quick-Grip Clamp Set
$57.28

Because not every workpiece has square edges, these clamps feature a swiveling jaw that conforms to angled surfaces and combats the inevitable flexing that occurs with resin clamps. It also features a spring-loaded, quick-change screw that makes it easy to reverse the fixed end and transform the clamp to a high-performance spreader. The screw also eliminates rattle in the end jaw. A heavy-duty I-Beam Bar allows you to apply 300 lbs. of clamping pressure with minimal bending and flexing. All these improvements come without any added weight, so the clamp retains its chief benefit: simple one-handed operation.Quick-release trigger provides fast positioning and maximum hand comfort.High-tech resin construction for light weight and a long clamp life.Heat-treated, black oxide carbon steel I-Beam Bar for extreme durability.Protective resin jaw pads are removable.Patented locking swivel jaw locks/unlocks with a flip of a switch.

Long Knife Jig SVM-140 for Tormek T-7 Sharpening System

Long Knife Jig SVM-140 for Tormek T-7 Sharpening System
$56.00

This jig is made especially for long and thin knives. It works in the same way as the SVM-45 jig but it is wider and therefore gives more support to long and thin blades. The jig rests on the Universal Support. The exact edge angle is set by rotating the stop or with the Micro Adjust on the Universal Support. The Universal Support is placed vertically for grinding towards the edge.The jig comprises an adjustable clamp for holding knives of any thickness and an adjustable stop. You adjust the jig to the knife thickness with the screw. You lock the tool by tightening the knob.Best Used With:35254 -Tormek T-7 Sharpening SystemClick Here to View Instructions:

Bench Cookie Plus T-Track Kit

Bench Cookie Plus T-Track Kit
$54.97

T-tracks are renowned for their adjustability, and Bench Cookies for their versatility - now this complete kit allows you to combine the two for the ultimate in both! T-Track Risers slide conveniently into your T-track to provide a set of four elevated posts for your Bench Cookie Plus Work Grippers. Not only do you get a no-slip, no-mar work surface that is fixed firmly in place, but the additional height creates space for saw blades and router bits beneath the workpiece. Simply spin the Bench Cookies and they tighten themselves down, then add a final cinch for good measure.Bench Cookie Plus T-Track Kit Includes:Bench Cookie Plus Work Grippers, 4-PackBench Cookie Plus 2" T-Track Risers, 4-Pack17-Piece Universal T-Track KitTo enhance the versatility of this kit even further, purchase the T-Track Intersection Kit (#22209 - Sold Separately).Bench Cookie Plus Work Grippers:Lift, grip, and protect at a higher level with Rockler's Bench Cookie Plus Work Grippers!Newly redesigned, these high-friction rubber pads hold your project rock-steady while sawing, sanding, or routing without the use of clamps.New design features a 3/4" insert for various riser systemsBench Cookie Plus 2" T-Track Risers:Simply spin the Bench Cookies onto the T-Track Risers via the 3/4" insert.Risers are made of aluminum with a grooved surface.2-1/2" T-bolts work with Rockler Universal T-Track Kit (included) and virtually any other T-track.Riser bushings measure 2" long.17-Piece Universal T-Track KitOutfit your workbenches, jigs, or machine tables with the ultimate accessory track!Universal T-Track boasts a unique stacked-slot design that allows you to attach any accessory with 1/4" T-bolts, 5/16" T-bolts, or 1/4" Hex-bolts.17-Piece Kit Includes: one 4' length of Universal T-Track, two 3-1/2" x 5/16" T-bolts, two 1" x 5/16" T-bolts, two 1-1/2" x 5/16" T-bolts, two 2-1/2" x 5/16" T-bolts, four T-knobs, and four 5-star knobs.

Scissors Jig SVX-150 for Tormek T-7 Sharpening System

Scissors Jig SVX-150 for Tormek T-7 Sharpening System
$54.00

Puts the maximum sharpness on all sizes of scissors and shears. The jig for scissors sharpening comprises a support plate and a holder with two clamps for the scissors. Usually you use only the right clamp. For large scissors and garden shears you use both clamps. You adjust the clamp to fit the scissors' thickness with the screw. You lock the scissors by tightening the knob. The support plate has a sliding surface, so the holder with the scissors can easily be moved while it is pressed onto the plate.Best Used With:35254 -Tormek T-7 Sharpening SystemClick Here to View Instructions:

Rockler Clamp-It Assembly Square 6-Pc. Kit

Rockler Clamp-It Assembly Square 6-Pc. Kit
$52.99

Includes everything needed to easily clamp two corners at a time: two original Clamp-It Assembly Squares and four 5" Clamp-It Bar Clamps. Bar Clamp is held in place on the Clamp-It Assembly Square with a friction fit to make operation quick, easy and one-handed.Technical Details:Ideal for picture frame joinery, RTA assembly, drill press jigs and adding a shelf.Rigid polycarbonate.Assembly Square measures 8" x 8" x 1-1/2".5" Clamp-It Clamps feature fixed heads with comfortable ergonomic handles.Clamps have fixed heads with movable tail pieces.Bar has anti-slip detents to prevent slippage when tightening.Throat depth is 3/4" to clamp center on the assembly square.Maximum clamping thickness when used with the Clamp-It Assembly Square is 2-1/2".Maximum clamping thickness without assembly square is 4-1/2"

Rockler Large Box Spline Jig

Rockler Large Box Spline Jig
$49.99

Cutting decorative splines for large boxes that can't be machined on the router table is easy with the Rockler Large Box Spline Jig! This jig clamps to the outside corner of your box or chest to provide a precise 45° sliding surface for your router. The jig's fence is adjustable so you can align the cut line with the center of your particular router. Once set, operation is simple. Just position the jig, clamp and rout. For very large boxes, space is provided for clamping cauls that can span the width of the workpiece. Try different router bits-straight bits, V-groove bits, dovetail bits and more-to achieve different effects! Adjustable fence aligns the jig with your particular router's baseCorner relief protects delicate corners and ensures a tight fit to the workpieceCentering line makes aligning the cut quick and simpleLarge clamping areas can accommodate cauls for the biggest boxesHang hole for convenient storage when not in useMade of durable ABS plastic with engineered structural strengthInstructions included

One-Hand Ratcheting Band Clamp

One-Hand Ratcheting Band Clamp
$49.99

Adjust to size automatically with just the push of a button!Easy-to-use ratcheting handle allows for true one-hand operation and fine precise adjustments.Provides positive, even pressure for a wide range of woodworking projects.Quick-release button retracts the band for fast, easy setup and take down.Nylon band measures 1" wide x 16' long and has four variable angle corner jaws to hold irregular shaped projects.Band detaches from one end of the ratchet for ease of use.Enclosed housing provides clean, tangle-free storage of band.With ergonomic comfort-grip handles.

Gorilla Gripper Plywood Carrier

Gorilla Gripper Plywood Carrier
$49.99

At last, here's a panel carrier that makes carrying plywood, drywall and other heavy sheet goods safe and easy on your joints. Unlike many carriers, the Gorilla Gripper clamps onto the top edge of the sheet, eliminating any bending or stooping, and allowing you to carry most sheet sizes with your hand comfortably locked in place over your shoulder. Simply slip it on, lift, and the Gorilla Gripper automatically clamps onto any stock from 0"-3/4". The incredible leverage and ultra-grippy pads won't slip, even on melamine. And with the load bearing down on your palm rather than straining at your fingers in a lower position, it's much easier on the muscles of your hand. Also great for sliding panels out of a vertical storage rack! Made in the USA. Aircraft-grade aluminum.

Dual Function Swiveling Base

Dual Function Swiveling Base
$49.99

Swiveling Base attaches to the Rockler Miter-Tight Picture Frame Clamp (sold separately) and features a matching hole pattern for easy mounting. Base serves to elevate your work and allows you to gain improved work angles for access to outside frame edges.

Bosch 1297D 1/4 Sheet Orbital Finishing Sander

Bosch 1297D 1/4 Sheet Orbital Finishing Sander
$49.99

When it comes to finish sanding, a light, nimble sander that won't gouge vertical surfaces is essential. The Bosch 197D is all that and more. It sports a 2.0 amp motor and 12,000 orbits per minute, which ensures a smooth, swirl-free surface, every time. It can be used with standard abrasive sheets for cost savings, or with PSA abrasives for the fastest installation times. It also features through-the-pad dust collection and an integrated filter that captures particles as small as 1/2 micron for a cleaner, safer working environment. All ball-bearing construction for a long life and smooth operation.Features:SheetLoc Sandpaper Attachment System pulls regular sandpaper flat and tight for uniform sanding, and longer paper life without adhesive paper's nearly twice-the-price cost.Rubberized paper clamps for firm, no-slip grip and easy paper changes.Also accepts PSA abrasives.Allows sanding close to vertical surfaces at at front, right and left of sander.Dust sealed rocker switch for durable, convenient off and on.3-point counterbalance for low vibration and maximum comfort.Ergonomic, soft grip top for comfort and control.

Rockler 4-Piece Router Table Accessory Kit

Rockler 4-Piece Router Table Accessory Kit
$49.99

Our 4-Piece Router Table Accessory Kit includes an easy-mount dust port, plus three featherboards for more consistent cut quality and to help prevent kickback. Two of the featherboards mount to the fence, exerting pressure down toward the table, while the third mounts to the table and keeps your work against the fence. Dust port has a 2-1/2'' OD (2-1/4'' ID) hook-upTable-mounted featherboard includes unique miter track clamps, which can be secured anywhere along the miter track with the twist of the knobFence-mounted featherboards slip into the accessory T-track, and are easily adjustable without tools

EZSmart Universal Saw Base

EZSmart Universal Saw Base
$49.99

The EZSmart Universal Saw Base is designed to ride securely in the track of the EZSmart Guide Rail (55763, sold separately), giving you precisely straight cuts with virtually zero tear-out. Unlike many similar systems, the base can be fitted to over 90% of left- or right-bladed 6-1/2'', 7-1/4'' and 8-1/4'' circular saws currently on the market. This means that you don't have to pay a premium for a specialty saw, and if you already have a circular saw, it is very likely to be compatible. When combined with just your saw, it can be used either freehand or riding against any straight edge system. For a package deal that includes the Universal Saw Base, 54'' EZSmart Guide Rail and a set of clamps, see 57811 (sold separately). Patent-pending anti-chip inserts provide zero clearance on each side of the blade for astoundingly clean cutsDanger of kickback is all but eliminated by the included anti-kickback fin, which follows the kerf like a riving knife, preventing the material from bindingNo more lugging around that heavy table saw to job-sites; get proven results with this light weight kitIncludes the anti-chip inserts required for use in conjunction with the optional EZSmart Guide Rail

Kreg Automaxx Bench Klamp System

Kreg Automaxx Bench Klamp System
$49.99

The Kreg Automaxx Bench Klamp System combines a 3" Bench Klamp with a Klamp Plate for a versatile 360-degree benchtop clamping station. Automaxx Bench Klamps automatically adjust for any thickness of material, eliminating the need to readjust the clamp when changing stock. Whether you're clamping a 2x4 or a piece of veneer, one squeeze is all it takes to secure your work. The clamping force is easily set with a thumbscrew, and once set, stays the same for all materials.Technical Details:Combines a 3" Automaxx Bench Klamp with a Kreg Klamp Plate.Auto Adjust technology automatically adjusts to any thickness.Clamps materials up to 2-1/2" thick.Easy-to-regulate clamping force using a simple thumbscrew.Extra-large padded clamp spreads clamp pressure evenly.Ergonomic padded grips prevent hand fatigue.Heavy-duty all-metal construction.Bench Klamps are compatible with Kreg Klamp Plate, Klamp Trak, and Klamp Vise Plate, as well as Rockler T-Tracks and the Rockler T-Track Table Top (46654, sold separately).

Pages: first pageprev page5 6 7 8 9 10 11 12 13 14next pagelast page