Picture frame joiner and fitting tool allows you to make professional quality picture frames every time! Features:Quickly and easily inserts V-nails, flexipoints, backing nails and screw eyes into hard and soft woods.For use with most types of frame clamps.Technical Details:Includes PushMaster tool, 400 V-nails and instructions, plus a starter assortment of backing nails and flexipoints.PushMaster tool inserts V-nails, flexipoints, backing nails and screw eyes into hard and soft woods.Additional V-nails, backing nails and flexipoints sold separately.V-nails, or frame nails, join the frame corners together to make a tight, firm join.Select a V-nail suitable to the molding height.As a general rule, use a V-nail about 50-60% of the molding height.Flexipoint bendable tabs are used to hold the picture into the frame.
Ripping panels up to 104" long has never been easier! The 52" to 104" Low Profile Straight Edge Clamp does it all. Benefits:Clamps for use as a straight edge with a router or circular sawAdd the T-fence and it becomes a T-square for laying out your projectConnect two 52" sections to create a 104" long straight edge that's long enough for even oversized panelsUse just one section as a 52" straight edge, T-square, or for easier storageIncludes a write/erase surface for use as a story stickPower tool guide (one included with system) rides in the straight edge for total control when cutting or routingAdditional power tool guides sold separatelyAcrylic base (#42279, sold separately) for use with saw or routers requires the Power Tool Guide Kit (#42173, sold separately).
Heavy-duty workshop vise has large 7" jaw width and 8" jaw opening.Solid steel guide rods reduce wear and tear, and give vises a smooth and true parallel action.Square body seating provides easy fit under benchtop so jaws are flush with bench.With 1/2" diameter handle.Toe-in feature provides even clamping pressure on the whole depth of the workpiece.Steel main screw with Acme threads for smooth and responsive adjustment.Accurately machined housings for smooth sliding movement.
What if we told you that you could spread out your hands and a work table would appear in front of your eyes? We had to see it to believe it, so click on the video to see for yourself. Now what if we told you that the work table, which weighs only 12 pounds, could support up to 1500 pounds? That's something we had to feel to believe, and if you press down on the expanded Centipede Sawhorse, you'll feel that there is no give whatsoever. So what can it do? Everything that a set of sawhorses and a work table can do-plus more-in a lightweight package that slips into a slim zippered bag. With six points of contact, you can lay down a sheet of plywood to create a table, or slip a couple of 2x4s into the included X-Cups to create two sawhorses. The X-cups can be moved from post to post and pivoted for angled cuts and for different sized workpieces. The system works fantastically with the various precision track saw systems on the market. Also included is a set of Quick Clamps, which slip into the polymer tops to hold your worktop or your material in place for cutting. Thanks to the deep valleys between the vertical posts, there is no risk of your saw blade or router bit hitting the Centipede supports. And in the unlikely event that you do nick one of the polymer tops (called P-Tops) your blade will not be damaged. It's not magic-it's just good engineering. Try it out and see for yourself! Collapsible work table folds down into a compact, lightweight unit for easy transport and convenient storageNo assembly required-everMultiple steel struts rest directly between the load and the ground to support an incredible amount of weight while supporting even the thinnest sheet materials with minimal saggingDurable, non-marring polymer P-Tops atop each post protect your cutting blades and the steel struts of the Centipede SawhorseEach P-Top spins 360° so the included Quick Clamps can be positioned to hold materials in placeQuick Clamps work just like traditional holdfasts-simply press down and the spring tension holds your materials in placeIncluded X-Cups cradle standard 2x4s for use as sawhorsesEach kit comes in a rugged canvas carrying/storage bag with zippered closure and room for extras
These fast-action holdfasts can be used in any 3/4'' dog hole in the benchtop for clamping items horizontally, or in the trestle legs for clamping large boards or doors on edge. With holdfasts, you can clamp items while still having access to most of the perimeter of your workpiece—useful when edge routing. Compatible with Sjobergs Nordic Plus, Duo, Scandi Plus and the Sjobergs Compact Workbench. For use in 3/4'' dog holesEasily accommodates varying stock thicknessesHolds securely with rugged Acme threadsNo-mar plastic clamp pad
Just lay the jig on your stock, tighten the two horizontal tracking knobs and start drilling error-free rows.Guarantees each row is perfectly in lineSpaces each hole exactly 37mm from the edge of your stockJig is easy to set up and easy to adjust for multiple rowsRows are spaced exactly 1-1/4" (32mm) apartPin holes are set back exactly 1-7/16" (37mm) from each edge32mm spacing and 37mm setback are fully compatible with the Euro hinge system24" long twin template tracks are joined by rigid rails that lock in place for error-free drillingDrill two rows with one jig to save time and ensure accuracyLocking 3-star tracking knobs allow for adjustments and ensure the jig stays firmly in placeReversible guide rails have a smooth aluminum surface on one side and a rubber fence on the other for better gripping powerIncludes two 5mm and two 1/4" indexing pins that eliminate the need for clamps and allow you to extend long rows of holes indefinitelyIncluded indexing pins store conveniently in the ends of each guide rail when not in useDrilling template is made of thick acrylic for durabilityDesigned for un-assembled cabinet components from 8-1/4"W to 25-1/4"W Self-Centering Drill Bits:Self-centering bits are pre-set to bore a consistent depth for perfect fitting shelf pins and sleeves every time. No adjustments are necessary! Various bit sizes available separately for both shelf pins and shelf pin sleeves. Decorative metal shelf pin sleeves provided added shelf strength.#40604 - 1/4'' Bit for 1/4'' Shelf Pin#40608 - 5mm Bit for 5mm Shelf Pin#41983 - 9/32'' Bit for 1/4'' Shelf Pin Sleeve#41981 - 7/32'' Bit for 5mm Shelf Pin Sleeve
Our Rockler Router Table Fence boasts the same features and tool-free adjustability as the original, PLUS an included dust port, bright, high-visibility bit guard and fence faces, and a gleaming black aluminum backbone. At 32" long, this extruded backer provides plenty of reference surface for straight, consistent routing. The top-mounted Universal T-track runs the length of the fence, and is perfect for attaching flip-down stops, hold-down clamps, or any other accessories with 1/4" T-bolts, 5/16" T-bolts, or 1/4" hex bolts. Two adjustable melamine-coated MDF faces round out this versatile, high-quality fence.Technical Details:Ergonomic T-knobs for easy fence adjustment.Includes bit safety guard for safe routing.Extruded aluminum backer provides a stiff, straight backbone.Large opening for big router bits.Aluminum fence backer features top-mounted universal T-track that accepts 5/16" T-bolts, 1/4" T-bolts, and 1/4" Hex bolts.
The secret is the innovative Dust Right Handle. One end accepts standard 4" dust hose, while the other is perfectly sized to slip in and out of the different Dust Right components. Just keep the Handle attached to your dust collector and you can move from task to task like never before. The included Tool Port fits on any 4" dust port for easy direct collection, and the Floor Nozzle combines with the 36" Extension Wand to keep floors spotless. The system also includes a smaller Bench Nozzle, a StableGate blast gate with a wall-mounting bracket to keep the hose organized, plus four spring clips to hang everything up and out of the way.The Tool Port features a flexible rubber boot on one side that guarantees a tight connection and allows for slight variations in the size of the tool's dust port. Requires a metal hose clamp to connect to tool (sold separately).The Floor Nozzle includes a built-in filter grate to keep large particles from entering your dust collection system.The StableGate blast gate prevents unwanted movement when opening the gate. It features multiple screw holes to allow for mounting in any direction.
With over six functions in one handy unit, this unique live center system provides comprehensive tailstock support for virtually any spindle turning project. It boasts triple-bearing construction for excellent durability and incredibly smooth turning, even when higher speeds or clamping pressures are required. Precision machined from the highest quality materials. Fits all lathes with a standard #2 morse taper tailstock quill. Versatile - over 6 mounting options in one handy unit.Morse taper allows quick-change capability for fast setups.Durable, high-quality triple bearing system.Fits all lathes with standard #2 morse taper (2MT) tailstock quill.Includes unique stepped cone system as standard, allowing ultra fast and convenient mounting of work.Can handle both heavy and delicate work, and hard and soft woods.Hollow morse taper allows the user to drill through the live center—ideal for drilling cable routes for lamps and more.Instruction manual included.Mounting Options:Threaded Center: Features an internal thread for mounting either a bolt or a screw (hanger bolt). Enables the center to be used to mount wooden plugs, disks or mandrels to support bowl work or spindle work. With its internal cone form, this center can also be used for quick centerless mounting of square or round spindles up to 8mm wide. The threaded center is also needed to mount the stepped cone accessory.Miniature Extension Center: Designed to support thin work or small, delicate turnings.60 Degree Center: A good all-purpose center designed for a wide variety of applications. Ideal for medium to hard woods.Hollow Cup Center and Point: Comes with its own demountable center point. An ideal way to hold softwoods without the risk of splitting.Stepped Cone: The Stepped Cone is a quick, convenient way to mount centerless rounds up to 40mm (1-9/16'') in diameter, as well as split turning pieces, or other work without a center. Reverse mounting of cone allows wedge fit of hollowed work. Requires the threaded center to mount it on the live center.
Install face-frame cabinets like a professional! Unique time-saving clamps have all-in-one design that allows you to tighten, align, pre-drill and fasten in one easy process.Accuracy is assured with these multi-function clamps.Clamping jaws align and tighten face frames.You can fasten face frames without removing or repositioning the clamps.Die-cast aluminum claws and alignment plate have protective felt pads to prevent marring.Allows you to install two stiles from 1-1/2" to 2" wide and up to 1-1/2" thick (each).
Dress up your mitered corner joints and add strength, too, with the Rockler Router Table Spline Jig! This clever jig locks into a standard router table miter slot and features a sled that holds your workpiece at a 45° angle while you guide it smoothly past the router bit. The adjustable fences act as stops to position your workpiece-one setting can cut all four slots for a frame, or eight slots for a box. Try different router bits to achieve different effects-straight bits, V-groove bits, dovetail bits and more! For larger boxes and chests see our Large Box Spline Jig (55153, sold separately), which is clamped to the outside corners of your box and used with a handheld router. Capable of accommodating a frame with a standard 11'' x 14'' opening, or a box measuring up to 12'' x 12'' x 12''Smooth-sliding tracks ensure accurate cuts and ease of useIncludes centering tool, which aligns the jig with the center of the router bit; stores onboardCentering line on sled aligns the bit with your cut lineTaller fences can be added to stock ABS fences to stabilize larger framesFences are removable to accommodate taller boxesWorkpiece can be clamped to sled if additional support is neededAll adjustments are achieved with tool-free knobsMDF base with durable ABS sledFits standard 3/8'' x 3/4'' miter slotInstructions includedFits router tables on which center of miter track is between3-1/4'' and 6-7/8'' from center of the bit.
The 3rd Hand HD is the help you have been looking for. It is rugged and built to last a lifetime. Versatile hand extension provides support, brace or clamp whenever you need an extra hand. 3rd Hand HD extends from 5' to 12' and has an action lever for secure pressure. It is perfect for crown molding and cabinet installations, putting up a plastic dust barrier, and as a truck load stabilizer. Features fully articulating, micro-adjustable top and bottom feet, quick-release lever and ball detents for positive locking every foot. Heavy-gauge main shaft and 150 lb. load capacity.Magnetic Laser Mount (25900, sold separately) secures to the 3rd Hand HD with powerful magnets and accepts almost any laserThe 3rd Hand HD Carrying Bag (28138, sold separately) conveniently stores up to four 3rd Hands and their accessories. Everything you need in one bag!Universal Foot (23239, sold separately) replaces the top or bottom foot and allows your 3rd Hand to freestand or increase your top platform surface area
Go BIG with the Kreg Jig HD Heavy-Duty Pocket Hole Jig-a supersized, industrial-strength Kreg Jig optimized for working with 2x4 stock and larger. With all of the famed speed of the original Kreg Jig, along with robust joints that are 50% stronger, and big 2-1/2" weather coated #14 screws, the Kreg Jig HD makes a simple, strong joinery system for wall framing, deck railing, outdoor furniture, gazebos, swings, fences, trellises and anything else that will need to stand the test of time and the elements. The Kreg Jig HD is extremely portable for job-site use, simply slip your Kreg Face Clamp (#26613 sold separately), into the jig and lock it into place for a one-piece system. Or, if you'd like to use it in the shop, you can also slip it into the benchtop base of the Kreg K3 and K4 jigs (#27204 sold separately) for upright drilling.
When you need a level or plumb reference line on your wall, ceiling or floor, this cross-line laser indicator will save you loads of time. Rather than hauling out your level, tape measure and chalk line, you can simply push a button, and the unit projects a plumb line, a level line, or both in the form of a set of crosshairs. Use it to install cabinets, trim, molding, wainscoting, and even for simple household tasks like hanging artwork. The laser is self-leveling and includes an adjustable mounting device that lets you clamp it to whatever surface is convenient: a table, countertop, or the steps of a ladder. It can also be threaded onto the Bosch Compact Tripod (52320, sold separately). Three modes: horizontal line, vertical line and crosshairsOne button toggles between the three modes, and also turns the device on and offFlexible mounting device conveniently clamps to multiple surfaces for quick and easy setupSmart pendulum leveling system self-levels and indicates when unit is out-of-levelSwitch locks leveling mechanism for transport
With a simple indexed angle setting system, heavy duty hold-down clamps and a smooth sliding design, it makes tapered cuts fast, easy and more precise. Perfect for chair legs, table legs and more. Jig fits snug in any standard 3/8" x 3/4" miter slot and features a large, ergonomic handle for smooth push-action performance throughout the cut. Plus, with the miter bar removed it doubles as a stable straight line ripping jig. Measures 31-5/8" x 7-3/4".Constructed of 1/2" thick MDF.Includes 36" miter bar.Indexing marks make angle setting easy - each mark represents 1° of taper.Dual tape measures provide convenient reference and also help set angles.Two wide-body hold down clamps prevent stock from drifting dangerously from your fence.Clamps have non-marring rubber caps for enhanced grip.Three adhesive strips run across the jig to help stabilize your workpiece.With taper angle zeroed out, jig works great to rip straight edges on rough lumber.
Take the frustration out of frame joints with this convenient clamp. Spring-loaded jaws transfer clamping pressure directly to the joint. The large ergonomic knob easily tightens jaws onto frames 5/8" to 2-7/8" wide. Back jaws adjust up to 1° to ensure a perfect fit if joint is slightly out of square. Open design allows easy access to outside corners and back surface for simple mechanical fastening. Swiveling Base (sold separately) features a matching hole pattern to easily mount the clamp, elevate your work and gain improved work angles for access to outside frame edges.Frame Clamp is made of lightweight cast aluminumSwiveling Base is made of solid steel
Tackle all of your clamping jobs with our original Clamp-It system and the NEW Mini Clamp-It!Deluxe Kit includes four full sets, including: Two Clamp-It Assembly SquaresFour 5" Clamp-It Bar ClampsTwo Mini Clamp-It Assembly SquaresFour 4" Mini Bar ClampsClamping your projects has never been easier! This is the complete assembly square and clamp system for all project sizes. With this offer, not only will you receive the great features of the the Original Clamp-It Assembly Square, you ALSO are getting the benefits of the Mini Clamp-It at half the size! Technical Details:Align it, clamp it and fasten it to get perfect 90° angles every time.The bar clamps are held in place on their respective assembly square with a friction fit to make assembly quick and easy with one-handed operation.The original Clamp-It Assembly Square measures 8" x 8" x 1-1/2".Mini Clamp-It Assembly Square measures 4" x 4" x 1-1/4".Assembly squares are manufactured from high impact, rigid polycarbonate.Bar clamps have fixed heads with movable tailpieces. With comfortable, ergonomic handles.For other angles, check out our Adjustable Clamp-It (Sold Separately)
Pair the EZSmart Clamp System with your EZSmart Guide Rail to safely cut even the narrowest materials on any surface-a workbench, table, even the floor. Simply slide the clamps into your EZSmart guide rail (sold separately), clamp the material, then flip the assembly over-the clamps act like miniature saw horses, raising the material off the surface to provide clearance for the blade. The system is ideal for small parts and narrow stock, and lets you perform straight, tapered or mitered cuts. It is an excellent tool for jobsite use, and well-suited for cabinet installers when cutting narrow stock such as filler strips. Made in USA. Safely holds even the narrowest strips of material for cuttingMakes straight, tapered or mitered cutsIdeal for cabinet makers and flooring installersReplaces the table saw and miter saw on the job siteWorks with any EZSmart Guide Rail (e.g. 55763, sold separately)