Pages: 1 2 3 4 5 6 7next pagelast page

Sjobergs Elite Workbench 2500 with Cabinet SM04

Sjobergs Elite Workbench 2500 with Cabinet SM04
$2,730.00

The Sjobergs Elite cabinetmaker's workbenches are made in Sweden to the very highest standards. Designed to totally eliminate any vibration, rocking or racking, they are suitable for the most demanding professionals. For maximum strength, the top is constructed with full-length laminations of knot-free European beech, without any ugly splices. Solid beech is also used in the preassembled trestle frames, and the entire bench is treated with top-quality oil. The tops are just under 3-3/8'' thick in the middle, joined with tongue and groove joints for consistent flatness. The skirt around the edge is a sturdy 4-5/16'' in height. The two massive pre-mounted vises, made in Sweden exclusively for Sjobergs, boast a 5-3/4'' opening capacity, and slide along fully adjustable guide rails to eliminate any jaw misalignment. If you are left-handed, the front vise can be moved to the other side of the bench, and the top rotated 180°. The bench also includes four solid steel bench dogs with side springs, while double rows of dog holes permit even the toughest clamping jobs using either vise. The heaviest, most durable benches in the Sjobergs line-built from solid beech and treated with top-quality oilMassive vises are 29'' wide with a 5-3/4'' opening capacityDouble rows of bench dog holes extend from both vise locationsTrestle is also pre-drilled with dog holesIncluded cabinet with doors and drawers offers convenient tool storage and added mass, which further eliminates vibrationIncludes four unbreakable 1'' round steel bench dogs that can be used in both the benchtop and the trestleVises can be rotated for both left- and right-handed useOptional Height Adjustment Blocks (56753, sold separately) raise the working height by 3-1/2'' for taller woodworkers

Sjobergs Elite Workbench 2000 with Cabinet SM04

Sjobergs Elite Workbench 2000 with Cabinet SM04
$2,575.00

The Sjobergs Elite cabinetmaker's workbenches are made in Sweden to the very highest standards. Designed to totally eliminate any vibration, rocking or racking, they are suitable for the most demanding professionals. For maximum strength, the top is constructed with full-length laminations of knot-free European beech, without any ugly splices. Solid beech is also used in the preassembled trestle frames, and the entire bench is treated with top-quality oil. The tops are just under 3-3/8'' thick in the middle, joined with tongue and groove joints for consistent flatness. The skirt around the edge is a sturdy 4-5/16'' in height. The two massive pre-mounted vises, made in Sweden exclusively for Sjobergs, boast a 5-3/4'' opening capacity, and slide along fully adjustable guide rails to eliminate any jaw misalignment. If you are left-handed, the front vise can be moved to the other side of the bench, and the top rotated 180°. The bench also includes four solid steel bench dogs with side springs, while double rows of dog holes permit even the toughest clamping jobs using either vise. The heaviest, most durable benches in the Sjobergs line-built from solid beech and treated with top-quality oilMassive vises are 29'' wide with a 5-3/4'' opening capacityDouble rows of bench dog holes extend from both vise locationsTrestle is also pre-drilled with dog holesIncluded cabinet with doors and drawers offers convenient tool storage and added mass, which further eliminates vibrationIncludes four unbreakable 1'' round steel bench dogs that can be used in both the benchtop and the trestleVises can be rotated for both left- and right-handed useOptional Height Adjustment Blocks (56753, sold separately) raise the working height by 3-1/2'' for taller woodworkers

Sjobergs Elite Workbench 1500 with Cabinet SM03

Sjobergs Elite Workbench 1500 with Cabinet SM03
$2,265.00

The Sjobergs Elite cabinetmaker's workbenches are made in Sweden to the very highest standards. Designed to totally eliminate any vibration, rocking or racking, they are suitable for the most demanding professionals. For maximum strength, the top is constructed with full-length laminations of knot-free European beech, without any ugly splices. Solid beech is also used in the preassembled trestle frames, and the entire bench is treated with top-quality oil. The tops are just under 3-3/8'' thick in the middle, joined with tongue and groove joints for consistent flatness. The skirt around the edge is a sturdy 4-5/16'' in height. The two massive pre-mounted vises, made in Sweden exclusively for Sjobergs, boast a 5-3/4'' opening capacity, and slide along fully adjustable guide rails to eliminate any jaw misalignment. If you are left-handed, the front vise can be moved to the other side of the bench, and the top rotated 180°. The bench also includes four solid steel bench dogs with side springs, while double rows of dog holes permit even the toughest clamping jobs using either vise. The heaviest, most durable benches in the Sjobergs line-built from solid beech and treated with top-quality oilMassive vises are 29'' wide with a 5-3/4'' opening capacityDouble rows of bench dog holes extend from both vise locationsTrestle is also pre-drilled with dog holesIncluded cabinet with doors and drawers offers convenient tool storage and added mass, which further eliminates vibrationIncludes four unbreakable 1'' round steel bench dogs that can be used in both the benchtop and the trestleVises can be rotated for both left- and right-handed useOptional Height Adjustment Blocks (56753, sold separately) raise the working height by 3-1/2'' for taller woodworkers

SawStop 10'' Jobsite Saw

SawStop 10'' Jobsite Saw
$1,299.00

The SawStop Jobsite Saw packs all of the safety of SawStop's revolutionary blade brake, plus a raft of other innovative features, into a compact, portable table saw. Whether on the jobsite or at home, you can rest easy with the safety and peace of mind of a SawStop saw. Landing somewhere between a benchtop saw and a contractor's saw in terms of size, the SawStop Jobsite Saw offers numerous benefits of both. It includes a pedal-actuated folding stand-one press and it unfolds from a compact vertical storage position to cutting mode. In transport mode, the stand acts as a dolly with 8'' wheels that allow you to easily move it over rough terrain and up ramps and stairs. The cleverly-designed table extension rides on rails that slide out for a maximum rip cut of 25-1/2'' right of the blade, while the smooth-sliding T-square fence ensures precise cuts and excellent parallelism with the blade. Of course, and perhaps best of all, the SawStop safety brake will stop the blade immediately on contact with skin, a particularly important feature on the jobsite where less than ideal working conditions can lead to increased risk of accidents. SawStop Safety Brake: Brings the blade to a halt almost instantly on contact with skinOne-Turn Blade Elevation: Other saws require over 25 turns to raise or lower the blade-with the Jobsite Saw, it's accomplished with a single turn!Quick-Tilt Blade Angle: Tilt the blade quickly and easily to your desired angle in 1° incrementsMicro Adjust Blade Angle: Fine tune your tilt with the infinitely-adjustable micro adjustT-Style Fence with ErgoLock: Jobsite T-Glide Fence slides smoothly and locks firm with the innovative ErgoLock. T-style design minimizes deflection to increase accuracy. Extend the OnDemand Shelf for support when needed.Fence Storage Holster: Side brackets offer convenient storage for the fence and cordLow-Profile Blade Guard: The Micro Guard increases visibility and protects against kickback with less interference than other guards. Quickly switch between the Micro Guard and the provided riving knife with the flip of a leverPedal-Activated Folding Stand: Simply push the pedal to release and fold the cart for travelLarge Wheels: 8'' wheels are ideal for the varied terrain of most jobsitesControl Box: Features the largest Start/Stop paddle in the category and lights to communicate system status. Use the control box to bypass the safety system to test for and/or cut conductive materialsTool-Free Zero-Clearance Insert: Quickly releases with no need for tools.Accessory Storage Drawer: Keep your accessories-your micro guard, riving knife, miter gauge and more-protected and ready at hand with the onboard storage drawerTable Extension Clamp: Locks and unlocks easily, allowing you to quickly extend the table to a full 25-1/2'' rip capacity!

Sjobergs Storage Cabinet SM04 for Elite Workbenches

Sjobergs Storage Cabinet SM04 for Elite Workbenches
$815.00

This cabinet is designed to fit the base of your Sjobergs Elite 2000 and 2500 workbenches (51317 and 51206, sold separately). The cabinet helps keep your tools organized and free of dust and shavings, while also adding mass to your workbench to dampen vibration and reduce shifting. Made from solid beech and birch plywood. Solid beech doors and drawer frontsDrawers slide smoothly on metal slidesDoors swing on fully adjustable Euro hingesEasy assembly; instructions included

Sjobergs Storage Cabinet SM03

Sjobergs Storage Cabinet SM03
$639.00

This cabinet is designed to fit the base of your Sjobergs Elite 1500 (51625, sold separately), Duo (53912, sold separately) or Scandi Plus workbenches (55403 and 53067, sold separately). The cabinet helps keep your tools organized and free of dust and shavings, while also adding mass to your workbench to dampen vibration and reduce shifting. Made from solid beech and birch plywood. Solid beech doors and drawer frontsDrawers slide smoothly on metal slidesDoors swing on fully adjustable Euro hingesEasy assembly; instructions included

Hafele SmartCab Base Cabinet Pull-Out With Soft-Close Slides

Hafele SmartCab Base Cabinet Pull-Out With Soft-Close Slides
$219.99

The Hafele SmartCab is a multi-purpose, pull-out storage unit mounted on a pair of silky-smooth, full-extension soft-close slides that provide easy access to items at the back of the cabinet. The basic unit includes a full-depth shelf and a half-depth shelf plus vertical divider for two basic configurations. This can then be enhanced with a wide variety of modular accessories or "Apps" depending on your storage needs. Accessories include cutting boards, knife blocks, flatware trays, spice racks, and two types of side caddys. The Apps are available in full- or half-depth versions, and fit into App Holders (48419 and 47298, sold separately), which are wooden trays that sit at the top of the SmartCab. Because the slide unit mounts to the bottom of the cabinet, the SmartCab doesn't require a precise opening width, making it ideal for remodelers and retrofitting.Technical Details:The SmartCab is designed to fit a 15" wide or 18" wide (when used with optional Side Caddy) base cabinet opening with a drawer above it. Because the slide unit mounts to the bottom of the cabinet, however, the SmartCab will fit into virtually any cabinet, making it ideal for remodelers and retrofit applications. Ideal for use as a small pantry, or to store kitchen utensils and pots and pans.Patent pending design allows you to configure the storage unit to fit your needs.Basic SmartCab (44109) includes pull-out unit with soft-close slides, full-depth shelf, half-depth shelf, vertical divider and hardware.Shelf features removable metal rails to keep items from falling.Simple installation-unit screws to floor of cabinet with 4 screws.Can be installed behind a hinged door or the door can be mounted to the pullout with included adjustable door mount brackets.Material: Pre-finished birch plywood capped with solid maple.Overall dimensions: 11"W x 22-11/16"D x 20"H.

22'' Soft-Close Pantry Pull-Out Slides, Set

22'' Soft-Close Pantry Pull-Out Slides, Set
$199.99

The momentum generated by closing large pantry pull-outs too quickly can often lead to some dish-rattling impacts. That's why these pull-out slides have an integrated soft-close device that dampens the travel as it closes, gently easing it back into the cabinet. A spring mechanism completes the closing cycle with a very smooth and quiet closing action. The slides feature rollers made from solid Delrin, and Delrin encased steel ball bearings. They also feature progressive action full-extension, where the load in the drawer is equally supported throughout the full stroke. Set includes both top and bottom slides. Solid Delrin rollers, Delrin-encased steel ball bearingsEasy-Close Device (ECD) integrated (top and bottom slide)The top slide has an adjustable out-stop to compensate for various loadsQuick and easy installationQuiet movement, even under the heaviest loadsHorizontal and vertical adjustmentTop slide provides absolute lateral stabilityLGA-tested according to DIN 4554 standard at 50,000 double cycles

Four Irwin Parallel Clamps w/Clamp Rack

Four Irwin Parallel Clamps w/Clamp Rack
$191.95

Irwin Parallel Clamps:With jaws that stay perfectly parallel, these clamps are ideal for accurate clamping of casework and drawers. The unique handle doubles as a clutch - just pull up to disengage. Clutch prevents clamp head from sliding down and pinching your fingers while on the clamp rack. The bar has no serrations, so the jaws slide smoothly and dried glue flakes off easily. Non-marring jaws are a full 2'' in width to spread clamping pressure over a greater surface area. Extra long screw thread gives a long clamping reach. Removable foot allows you to reverse the head for use as a spreader. 3-3/4'' throat depth.Parallel Clamp Rack:Organize your bulky parallel clamps once and for all. This specially designed rack holds all brands of parallel clamps - up to 12 in all - for easy and convenient storage. Pre-drilled holes are 16'' on center for simple mounting to wall studs. Store parallel clamps up to 50'' in length. Durable galvanized steel construction. 24'' inches long.

Cabinet 0042 For Sjobergs Workbenches

Cabinet 0042 For Sjobergs Workbenches
$190.00

This cabinet is designed to fit into the base of your Sjobergs Nordic Plus 1450 Workbench (56000, sold separately) or the Sjobergs Hobby Plus 1340 benches (58508 and 56530, sold separately). The cabinet helps keep your tools organized and free of dust and shavings, while also adding mass to your workbench to dampen vibration and reduce shifting. Made from birch and birch plywood. Sturdy box joints at all drawer cornersDrawers slide smoothly on wooden runnersSliding doors provide easy access to tools and can be left open without obstructing your movementEasy assembly; instructions included

Irwin 4 Piece Parallel Clamp Set

Irwin 4 Piece Parallel Clamp Set
$175.96

With jaws that stay perfectly parallel, these clamps are ideal for accurate clamping of casework and drawers. The unique handle doubles as a clutch - just pull up to disengage. Clutch prevents clamp head from sliding down and pinching your fingers while on the clamp rack. The bar has no serrations, so the jaws slide smoothly and dried glue flakes off easily. Non-marring jaws are a full 2" in width to spread clamping pressure over a greater surface area. Extra long screw thread gives a long clamping reach. Removable foot allows you to reverse the head for use as a spreader. 3-3/4" throat depth.

Case of 25 Blum low-profile 3/4 extension drawer slides - 22'' drawer length, Brown

Case of 25 Blum low-profile 3/4 extension drawer slides - 22'' drawer length, Brown
$159.99

Same great slides, sold in cases of 25 sets per case for those with large quantity needs. Screws sold separately. Each case of 25 slides requires one pack of 52532 screws (400 per pack).These epoxy coated drawer slides are among the quietest, smoothest and lowest profile (only 7/8" ) slides on the market. Heavy gauge steel coated with easy-to-clean epoxy. Slides only require a 1/2" space on each side of the drawer for installation. Slide mounts to the bottom of the drawer side and cabinet side. Drawers extend 4" less than their overall length. Rated up to 100 lbs. Use the Blum Universal Bracket to mount these Blum slides to the underside of a counter surface (example: pencil drawer) or to cabinet bottoms (example: roll out tray). Sold in cases of 25. Use Blum Rear Mounting Sockets to support drawer slides on face frame cabinets. 3" sockets and elongated mounting slots permit up to 2" of slide adjustment. Sold in pairs. Use Blum Face Frame Spacers - Adjustable in 1/16" increments within the listed range by using supplied shims. Includes Euroscrew for 32mm drill patterns. Each set includes 4 blocks for 1 pair of slides. Use the JIG IT Template System or Blum Slide Jig Gun for quick, easy and accurate installation of any of these Blum slides. Constructed from durable laser cut acrylic. Price is case of 25 sets of left and right slides.

500-lb. Heavy Duty Full-Extension Drawer Slides - Accuride 9301 (16" to 60")

500-lb. Heavy Duty Full-Extension Drawer Slides - Accuride 9301 (16" to 60")
$139.99

Get the ultimate performance, including full-extension slides, a drawer-silencing feature and the ability to side- or flat-mount for a number of applications. Heaviest rated slide available.Use for large pantry pulloutsTool storage pulloutsWide lateral file drawersVehicular storage drawers.Load ratings are dependent upon slide usage. Side- or flat-mounting increases versatility. Full extension provides better drawer access. Additional mounting holes allow easier installation. Drawer-silencing feature provides quieter movement. Slide measures 3" H x 3/4" W.For moderate usage, such as for computer access drawers or power back-up systems storage, the slides are load rated at 500 lbs. per pair. Drawer width to 18". Cycled 10,000 times.For frequent use, including in large pantry pullouts, toolboxes, modular storage, the slides are load rated at 400 lbs. per pair. Drawer widths to 42" and cycled 75,000 times.For vehicle mounts, including in RV and truck bodies and for emergency vehicle power supply units, the slides are load rated to 300 lbs. per pair. Drawer widths to 32". Cycled 10,000 times.For flat-mounting anywhere side space is limited, the slides are load rated at 150 lbs. per pair. Drawer widths 32" and cycled 10,000 times.Price is per pair of slides.PLEASE NOTE: We DO NOT carry all sizes listed on the Accuride Product Information Sheet.Click to see Accuride Mounting Brackets (Series 9301)

Complete Drawer System for Knives w/Cutting Board, Rev-a-Shelf 4KCB Series

Complete Drawer System for Knives w/Cutting Board, Rev-a-Shelf 4KCB Series
$129.99

These organizers from Rev-a-Shelf come complete with slides and drawer boxes to replace your existing drawer. All you have to do is add your drawer front to these accessories to make your custom drawer organizer.This state-of-the-art combination knife holder/cutting board system glides on full-extension ball bearing slides and is designed for Base 18", 21" and 24" cabinets. The 4KCB Series features a removable mineral oil treated cutting board.DETAILS PER SKU:1001904Dimensions: 20.5"W x 5"H x 22.25"DMin. Cab. Opening: 20.512"W x 5"H x 22.25"D1001902Dimensions: 14.5"W x 5"H x 22.25"DMin. Cab. Opening: 14.5"W x 4.75"H x 22.25"D1001903Dimensions: 17.5"W x 5"H x 22.25"DMin. Cab. Opening: 17.5"W x 5"H x 22.25"D

Bulk Pricing of Blum low-profile 3/4 extension drawer slides-White Slides

Bulk Pricing of Blum low-profile 3/4 extension drawer slides-White Slides
$124.99

Same great slides, sold in cases of 25 sets per case for those with large quantity needs. Screws sold separately. Each case of 25 slides requires one pack of 52532 screws (400 per pack).These epoxy coated drawer slides are among the quietest, smoothest and lowest profile (only 7/8" ) slides on the market. Heavy gauge steel coated with easy-to-clean epoxy.Slides only require a 1/2" space on each side of the drawer for installation. Slide mounts to the bottom of the drawer side and cabinet side. Drawers extend 4" less than their overall length. Rated up to 100 lbs.Use the Blum Universal Bracket to mount these Blum slides to the underside of a counter surface (example: pencil drawer) or to cabinet bottoms (example: roll out tray).Sold in cases of 25.Use Blum Rear Mounting Sockets to support drawer slides on face frame cabinets. 3" sockets and elongated mounting slots permit up to 2" of slide adjustment.Sold in pairs.Use Blum Face Frame Spacers- Adjustable in 1/16" increments within the listed range by using supplied shims. Includes Euroscrew for 32mm drill patterns.Each set includes 4 blocks for 1 pair of slides.Use the JIG IT Template System or Blum Slide Jig Gun for quick, easy and accurate installation of any of these Blum slides. Constructed from durable laser cut acrylic.Price is case of 25 sets of left and right slides.

Rev-a-Shelf Heavy-Duty Mixer Lift

Rev-a-Shelf Heavy-Duty Mixer Lift
$114.99

Mixers are extremely helpful but can also be extremely heavy. They can also take up much needed space if left out on the counter making it necessary to lift and put away the mixer only to have to lift it back out again later. The Heavy-Duty Mixer Lift from Rev-a-Shelf allows you to easily raise your mixer (holds up to 60lbs) out of its cabinet to counter-top level. This gives you easy access to your mixer in seconds without having to lift such a heavy appliance. To lift your mixer gently pull it up and fix it into position by sliding the lock back. When you are ready to put your mixer away all you need to do is pull the lock out and gently slide the mixer back into the cabinet. Rev-a-Shelf's heavy-duty mixer features built-in shock dampers which allow for a smooth movement when going up or down. This lift also features an adjustable spring tension mechanism which helps ease the effort of lifting or lowering the mixer. The mixer lift can be adjusted to several different weight capacities: 0-20lbs, 20-30lbs and 30-60lbs.Cabinet Requirements Cabinet Depth: 24 Minimum Cabinet Height: Full height with no drawer To help determine the width of your shelf install the mounting plates and then measure the distance between them minus 1-1/4 Cabinet Frame Opening: 12-1/2 Minimum Shelf Size: ¾ thick x 20-1/2 length MinimumMixer Limitations Weight: 60lb Maximum Height: 17-9/16 Maximum

Laptop Security Drawer

Laptop Security Drawer
$104.99

This security drawer not only guards against theft, it lets you use and store your laptop without wasting desk space. It fits easily beneath your desk and secures witha quality key-locking mechanism. A comfortable wrist rest and vented bottom panelallow for extended computer use without fatigue or laptop overheating. It includestwo smooth-rolling 3/4 extension slides. And at 1-3/4" x 17-3/4"x 13-1/4" itaccommodates most laptop computers. Comes pre-assembled. Screws not included.Keep your laptop locked up right with this convenient storage drawer! Additionalfeatures:Over 17" wide — accommodates most laptops Foam wrist rest lets you work comfortably with laptop in drawerVented bottom panel helps prevent computer from overheatingHeavy-gauge steel construction.

Accuride 9301 Mounting Brackets-Bottom Mount Brackets

Accuride 9301 Mounting Brackets-Bottom Mount Brackets
$101.99

Heavy-duty brackets allow four bottom mounting options for Accuride 9301 slides.Perfect for use on pantry pullouts, storage trays and TV or entertainment unit platforms! Choose brackets based on slide length. Slide height varies between 3" to 3-25/64", depending on mounting application. Includes all hardware to mount brackets to slides and one pair of brackets. Slides sold separately.Click to see Accuride Extra Heavy Duty Drawer Slides (Series 9301)

Pages: 1 2 3 4 5 6 7next pagelast page