Pages: first pageprev page1 2 3 4 5 6 7next pagelast page

Suspension Drawer Slide

Suspension Drawer Slide
$16.99

These four-point suspension drawer slides are a snap to install and will create a strong and stable slide! Works for new or existing drawers with a minimum drawer height of 5/8" less than cabinet opening and 1/8" to 5/32" side clearance. The 22 5/8" slide can be cut to length you need with a hacksaw.Drawer extends 4 1/2" less than overall length.Rated at 50 pounds.

100-lb. Push-to-Open Full Extension Drawer Slides - Centerline 757-P (16" to 22")

100-lb. Push-to-Open Full Extension Drawer Slides - Centerline 757-P (16" to 22")
$16.99

Drawer opens enough for you to reach in and fully extend it with no need for pulls or knobs - perfect for a clean, modern look, or where space or clearance is a concern, such as for boats, motor homes and corner cabinets, where a pull could damage adjoining cabinets. Centerline Lifetime Push-to-Open Drawer Slides feature smooth ball- bearing action with hold-in detents to prevent accidental opening. Zinc finish.

100-lb. Low Profile Full Extension Drawer Slides - Accuride 3732 (12" to 26")

100-lb. Low Profile Full Extension Drawer Slides - Accuride 3732 (12" to 26")
$16.99

Low profile full-extension slide is ideal for woodworkers looking to upgrade from 3/4 extension slides. Economical low profile slide is only 1-1/2" high.

75-lb. Comfort-Close Over-Travel Drawer Slides - Centerline 757CC (14" to 22")

75-lb. Comfort-Close Over-Travel Drawer Slides - Centerline 757CC (14" to 22")
$16.19

Designed for the smoothest possible closing action! A spring loaded, pressure-controlled mechanism automatically engages to ease the drawer quietly shut during the final 1-1/2" of travel. These over travel slides also feature convenient lever disconnect and impeccable construction.Note: These slides have very tight tolerances and require that the drawer box be square and the slides be parallel. If this attention to detail is not followed you may find them binding on open or close cycle.

Nylo-Tape Friction Free Drawer Slide Tape-Choose thickness

Nylo-Tape Friction Free Drawer Slide Tape-Choose thickness
$15.99

Smooth sliding action! Guaranteed friction-free movement with this self-adhesive and self-lubricating nylon tape.1/2" and 3/4" wide tapes are ideal for drawers.3" wide tape works great on stationary machine fences.

Simple Scribe with FREE Square Check

Simple Scribe with FREE Square Check
$15.98

Simple Scribe: Scribing cabinets to butt neatly against an uneven wall has never been so simple and foolproof. The seven faces of the Simple Scribe are preset to scribe at precise 1/8'' increments ranging from 1/4'' to 1''. To set your scribing distance, just rotate the tool so that the appropriate face rests against the wall. Unlike many ordinary compass scribes, your setting won't slide around under pressure, as it is permenantly fixed. The pencil also won't slide, as it uses a threaded interface to fold it firmly. Use any ordinary pencil. Made in USA. Designed and created by an expert carpenterSimple, robust construction-no moving parts to breakLightweight and portable-a great addition to any jobsite tool bagHolds regular pencils firmly in place with a clever threadSeven faces with offsets between 1/4'' and 1''Made in USA FREE Square Check for Tape Measures: This simple accessory prevents your tape measure from slipping off the corner while measuring diagonals. The 90° inside corner securely straddles any outside corner, and rotates 360° to accomodate any rectangular object. It attaches easily to your tape with a single, powerful rare earth magnet. Use it while assembling drawers for a perfectly square batch. Also great for cases, frames and more. Slot for tape hook measures 1-1/8" wide. Made of durable plastic.

Home Bar Plan

Home Bar Plan
$15.79

This traditional frame and panel design bar plan includes two drawers, two doors and a dry sink. Authentic wall mirror unit displays and stores glasses and bottles.Full size patterns for all shaped piecesDetailed exploded viewStep by step instructionsComplete material listElevation drawingsBehind this traditional frame and panel bar are two drawers and two doors where you can conveniently store your bar supplies and liquor. The overall completed size of the bar is 72" long by 38-1/2" high by 24" deep. The shop-tested plan includes full-size patterns for all shaped pieces, a detailed exploded view, step-by-step instructions, a complete material list, and elevation drawings.The mirror unit in back of the bar features glass racks (sold separately) above, and a railing (sold separately) for displaying and storing your bottles beneath the mirror. Use our cherry gallery spindles for making a decorative railing to keep your bottles in place. The completed mirror unit measures 72" wide by 41-1/8" high by 10" deep.The brass foot railings are what really turn an ordinary counter into an authentic bar. We offer the professional railing hardware used by the most stylish bars and restaurants (see hardware sold separately below).Bar Mirror Plan Requires:2 each - Door Pulls - Brass Finish - 3"2 each - Drawer Knobs - Brass Finish - 1-1/2"2 Pair - Drawer Slides - Full or 3/4 Extension8 each - 1/4" Shelf Pins2 pair - Full Overlay Hinges - Brass Finish1 each - #74032 Sink - 6" x 13" x 14"1 each - Brass Toe Rail - 1-1/2" x 23" x 72" (N)5 each - Brass Toe Rail Brackets (W)2 Brass Rail Elbow (L)2 Brass Rail End Caps (Y)Wood Screws - #8 x 1-1/4" and #8 x 2"1 package - Wood Plugs to match the wood you choose1 roll - Veneer Tape to match the wood you choose - 8' x 1-9/16"Bar Molding - Pre Made or you can make your own2 each - Sides - 2-1/2" x 4-3/8" x 24-1/4"1 each - Front - 2-1/2" x 4-3/8" x 71-5/8"13 each - Stemware Holders - 3/4" x 3" x 7" - Pre Made or you can make your own.Crown Molding - Pre Made or you can make your own 2 each - Ends - 3/4" x 2-9/16" x 10-1/8"1 each - Front - 3/4" x 2-9/16" x 64-1/8"1 each - Gallery Molding- 3/8" x 3/4" x 60-3/4"15 each - Gallery SpindlesWood Screws - #8 x 2" and #8 x 1-1/4"20 each - #20 Joining Biscuits25 each - 3/8" Wood Plugs to match the wood you choose6 each - 3/8" Wood Buttons to match the wood you choose

Arts & Crafts Hutch Hardware Kit and Plan

Arts & Crafts Hutch Hardware Kit and Plan
$15.79

Build a Mission style hutch resembling those made by Gustav Stickley.Hutch measures 71" high x 50" wide x 16-1/2" deep. Hardware kit (sold separately) includes:2 - #26823 authentic Mission Escutcheon solid copper pulls 4 - #26740 authentic Mission solid copper pulls 4 - #28613 brass ball catches 4 - #30437 brass pin supports support pins for the shelves 3 pairs - antique finished door hinges 2 pairs - #32474 Accuride drawer slides

100-lb. Self-Closing Full Extension Drawer Slides - Centerline 757 SC (16" to 22")

100-lb. Self-Closing Full Extension Drawer Slides - Centerline 757 SC (16" to 22")
$15.29

An integral self-closing mechanism engages during the final 1-1/8" of travel, automatically guiding drawers closed and preventing accidental opening. Full extension travel provides easy access to the contents of the drawers. Slides feature a 100-lb. load capacity and compatibility with all 32 mm hole systems. Requires 1/2" of side clearance.

Accuride Shelf Standard Slide Brackets

Accuride Shelf Standard Slide Brackets
$14.99

Infinite height adjustability and easy drawer repositioning, additions and removal are features of these shelf standard slide brackets-plus you can change the spacing of drawers without completely starting over!The Accuride slide brackets work with any of the Accuride slides from the 2132, 3832, 3834 and 2632 series, Rockler 766 and 757 series, Shop Basics GS757 series and Blum slides. These brackets add 1" of required side space per side.

Hafele Metal Drawer Box System-22" Drawer Slides

Hafele Metal Drawer Box System-22" Drawer Slides
$14.99

For durable, smooth-rolling drawers in hardly any time at all, try Hafele's Metal Drawer Box System. These epoxy-coated metal drawer sides practically eliminate the time it would take to construct a wooden drawer box, and thedrawer slides are integrated into them, saving the time it takes to fasten drawer members onto the box. This design also maximizes useable space inside the drawer, effectively eliminating the thickness of a wooden drawer side. Available in a range of heights, they are the perfect companions for our Shop Stand Drawer Kits (see 47716). Brackets for mounting a drawer front to the drawer sides are included.

Rockler Dovetail Router Bits - 1/2" Shank

Rockler Dovetail Router Bits - 1/2" Shank
$14.99

All of our dovetail bits are specially designed with high radial and axial relief angles to give you extra clean, sharp edges. You'll find many applications for these bits. Make creative, decorative glue joints for drawers and jewelry boxes, shaker furniture and shadow boxes, sliding dovetail joints for table and leg extensions, or sliding drawer and shelf runners and dividers. Smaller degree bits can be used for stair tread stringer mortising or shelf supports. Larger diameter bits can produce unique finger pulls.

Rockler Dovetail Router Bits - 1/4" Shank

Rockler Dovetail Router Bits - 1/4" Shank
$13.99

All of our dovetail bits are specially designed with high radial and axial relief angles to give you extra clean, sharp edges. You'll find many applications for these bits. Make creative, decorative glue joints for drawers and jewelry boxes, shaker furniture and shadow boxes, sliding dovetail joints for table and leg extensions, or sliding drawer and shelf runners and dividers. Smaller degree bits can be used for stair tread stringer mortising or shelf supports. Larger diameter bits can produce unique finger pulls.

75-lb. 3/4 Extension Drawer Slide - Accuride 2132 (14" to 28")

75-lb. 3/4 Extension Drawer Slide - Accuride 2132 (14" to 28")
$12.99

New! Cam Drawer Adjust for easy installationThere are many uses throughout the house for this versatile side mounted slide. Use it in home offices, family rooms, bathrooms and kitchens. All slides in this series include quality features like soft touch ball bearings, a hold-in catch, a positive extension stop and a disconnect release lever.Applications:Store fixturesDesk drawersResidential cabinetry (Not recommended for lateral files. Use for side mount only)Features/Specifications: 3/4 extension.50" side spaceHold-in detent to prevent drawer roll-out and bounce-backLever disconnectEasy access to mounting holesSilencedClear zinc finishBlack, or white finish75 lb./pair load ratingSteel ball bearingsEven lengths 10" -28" (except for white)Use our JIG IT Template System to make installation of these Accuride Slides a snap!See our Accuride Face Frame Bracketsfor quicker installation.Price is per pair of slides.PLEASE NOTE:We DO NOT carry all sizes listed on the Accuride Product Information Sheet.

100-lb. Zinc Over-Travel Drawer Slides - Centerline 757 (10" to 28")

100-lb. Zinc Over-Travel Drawer Slides - Centerline 757 (10" to 28")
$12.14

A 100-lb. load rating perfectly suits these slides for heavy everyday use, while 1" over-travel past full extension provides total access to drawers beneath overhanging countertops. An attractive zinc finish and several additional high performance features make this a traditional favorite for both the home and office.Technical Details:Sold in pairs and includes installation instructions and mounting hardware.Steel ball-bearing action for smooth and quiet operation.Installation requires 1/2" of side clearance.Lever disconnect for easy drawer removal.Positive stop to prevent accidental rollout.RoHS compliant, meeting the newest European and US ecological standards.Tested to 50,000 cycles and backed by Rockler's limited lifetime warranty.Replaces Accuride series3832.Rear brackets (47585, sold separately) required for mounting to faceframe cabinets.Note: Over travel for all 10"-28" is 1".

100-lb. Black Over-Travel Drawer Slides - Centerline 757 (10" to 24")

100-lb. Black Over-Travel Drawer Slides - Centerline 757 (10" to 24")
$12.14

A 100-lb. load rating perfectly suits these slides for heavy everyday use, while 1-1/2" over-travel past full extension provides total access to drawers beneath overhanging countertops. An attractive black finish and several additional high performance features make this a traditional favorite for both the home and office.

GO-EZ Universal Concealed Drawer Slide Set

GO-EZ Universal Concealed Drawer Slide Set
$11.99

This type of slide has been used in millions of cabinets since being introduced in 1948. These slides can replace worn slides or be used as an affordable option in new cabinets. Slide length is cut-to-fit simply trim with a tin snips. Concealed installation. Needs only 1/8" of side clearance for more usable drawer space. An excellent, affordable slide for utility drawers in the shop or garageRetrofit onto existing cabinets—there are millions of these same slides still in use todayNew acetyl wheels provides longer wear and higher load capacityTotally concealed design mounts to bottom of drawer for maximum drawer width and clean drawer side appearance4-Point suspensionDual dimple stop provide safety stop and lock openCan be installed as originally, with staples, or with screwsSlides are 24'' long—trim to length if necessary with a tin snips or hacksaw

#6 x 5/8" Flathead Zinc Screws, 400 Pack (for Blum Low-Profile 3/4 Ext)

#6 x 5/8" Flathead Zinc Screws, 400 Pack (for Blum Low-Profile 3/4 Ext)
$11.99

#6 x 5/8" Flathead Zinc Screws designed for the Blum Low-Profile 3/4 Extension Drawer Slides.Pack of 400.

Pages: first pageprev page1 2 3 4 5 6 7next pagelast page