Pages: first pageprev page1 2 3 4 5 6 7next pagelast page

Mortise Chisel Bit 1/4"

Mortise Chisel Bit 1/4"
$34.99

The bit removes most of the material, and the chisel squares up the sides, allowing you to cut precise 1/4" mortises for mortise-and-tenon joints. Fits the Jet Benchtop Mortising Machine (81421, sold separately).NOTE: Use with Mortise machines and drill presses with a mortising attachment.

Rockler 48'' Universal T-Track with Hold-Down Clamps

Rockler 48'' Universal T-Track with Hold-Down Clamps
$34.99

This combo package includes a 48" length of our new anodized aluminum Universal T-track, plus two hold down clamps (each including one hold down, one 3" T-bolt, and one 5-star knob). Additional hold downs are available separately below. This kit makes a great addition to our Drill Press Table!Technical Details: Hold down clamps accommodate material up to 2-1/2" thick.Universal T-Track features a unique, stacked-groove design that accommodates 1/4" T-bolts, 5/16" Hex-bolts, and 1/4" Hex-bolts, allowing you to attach a wide range of accessories. Aluminum T-track is easy to cut to length.Star knobs hold clamps firmly in position.

6-Pc. Fractional Forstner Bit Set

6-Pc. Fractional Forstner Bit Set
$34.99

Drill holes that have extremely smooth sides, a flat bottom, and no surface tear-out. High carbon steel bits are perfect for doweling, mortising, pocket holes, hardware installation and more! Cleanly cut through side grain, end grain - even knots, plywood and composites.Technical Details:Includes 5/16", 7/16", 9/16", 11/16", 13/16" and 15/16" bits with 3/8" round shanks.Great for instrument mounting, cutting arcs, overlapping holes, and boring through veneer or other thin materials.Bits have two bottom cutting edges that efficiently shear through wood.Exterior cutting rim, along with the inner brad point, keeps the bit in position on the workpiece. As the rim cuts the outside "circle," the bit's two bottom edges quickly cut out the inner wood.Wide flute openings allow for fast chip removal.Unique tapered rims help prevent burning.Pre-sharpened and ready to use in any type of wood.For use with a drill press or hand drill.Comes in durable plastic case.

7-Pc. Forstner Bit Set

7-Pc. Forstner Bit Set
$34.99

Perfect for doweling, mortising, pocket holes, hardware installation and more! Set has 1/4", 3/8", 1/2", 5/8", 3/4", 7/8", 1" bits with 3/8" round shanks. Use with a drill press or hand drill. Technical Details:Presharpened bits are ready to use in any type of woodCut precision flat bottomed holes with exceptionally smooth side wallsNo surface tear-outDurable, protective molded plastic index box

Rockler Double Featherboard

Rockler Double Featherboard
$32.99

Apply pressure at table-level AND the top of your fence “ ideal when routing workpieces on edge. Super stable, with unique expandable miter track bars. For use with table saws, router tables, drill presses or any tool with a standard miter slot. Features two easy-to-grip locking knobs that safely position featherboard in place. Unique, expandable miter track bars provide maximum holding power. Snug hold allows for safer, cleaner cuts when ripping, routing and drilling.

UHMW Plastic Jig Stock - 3/4'' Thick

UHMW Plastic Jig Stock - 3/4'' Thick
$30.99

Often referred to as the World's Toughest Polymer, Ultra High Molecular Weight (UHMW) Polyethylene is your best material choice for making jigs and fixtures for your table saw, router table, drill press, etc. UHMW is a linear high density polyethylene that's 10x heavier than regular high-density polyethylene giving you a rock-solid base for your jig or fixture. UHMW has a low coefficient of friction and is self-lubricating, making it glide over your work surface with little resistance. Plus, this rugged polymer will last for years, as it is highly resistant to abrasions, chemical-resistant, and maintains its high-impact strength even at low temperatures. 4''W X 24'' L X 3/4'' Thick UHMW Plastic Jig Stock.

45/90 Degree Layout Miter Gauge

45/90 Degree Layout Miter Gauge
$29.99

Make layout easier - scribe perfect 45° and 90° cutlines at the same time! Ideal for picture frames, corner molding, and various box constructions, this precise gauge also works to prep saw blades or drill presses for angled jobs. A balanced, wide-face design adds remarkable stability, while interior windows make marking parallel lines fast and easy. Made from solid, lightweight aluminum.Use this versatile gauge for precise 45° and 90° reference all over the shop.Additional Features:Great for marking as well as angle checkingWindows in each face add versatility (ideal for marking parallels)Three scales allow for precise distance measurement (metric only)Weighs just 90 grams (roughly 3.2 ounces)

Heavy-Duty Circle Cutter

Heavy-Duty Circle Cutter
$29.99

Adjustable cutter is designed for use on your drill press to make circular cuts 1-3/4" to 7-7/8" in diameter in wood, plastic, brass, copper, aluminum and more. For the smoothest circles possible, cut half way through your material, then flip it over to finish the cut from the back.Technical Details:1/2" round shankReplaceable 1/4" blade and 1/4" pilot drillMade in USANote: Do not exceed 500 RPM maximum safe speed

3-Pc. Self-Centering Plug Cutter Set

3-Pc. Self-Centering Plug Cutter Set
$29.99

Unique spring-loaded self-centering tip guides cutter and prevents walking to cut a smooth, tapered plug every time! Set includes 5/16", 3/8" and 1/2" cutters.Technical Details:1/4" quick shank prevents tool from slipping the drill chuck. Works with all 3/8" and 1/2" drive drill presses and handheld drills.Hardened steel for long life.Set Includes 5/16", 3/8" and 1/2" cutters.Cutters are also sold individually.

Rockler Universal Drawer Slide Jig

Rockler Universal Drawer Slide Jig
$29.99

The Rockler Universal Drawer Slide Jig is the ultimate aid for installing drawer slides of almost any type, including ball-bearing or epoxy-coated side-mount slides and even center-mount slides! The jig features a locking wedge that holds the slide securely with no risk of slippage. Press the jig against the face of your cabinet and your slide is positioned perfectly level, with the proper setback. The jig can be clamped in place if desired, and it also features an adjustable rod that references off of the face frame rails or cabinet bottom for fast, repeatable height settings. Sliding wedge locks slide securely into the jigAdjustable indexing foot allows perfect repeatabilityFoot can be rotated for use on top or bottomCutouts in jig allow access for drill and driver bitsLarge clamping area so jig can be clamped in placeDurable foamed nylon body with steel indexing rod and ABS footIndexing rod is stored onboard when not in useNot compatible with Blum Tandem Drawer Slides.

UHMW Plastic Jig Stock-3/8 Inch Thick

UHMW Plastic Jig Stock-3/8 Inch Thick
$26.99

Often referred to as the World's Toughest Polymer, Ultra High Molecular Weight (UHMW) Polyethylene is your best material choice for making jigs and fixtures for your table saw, router table, drill press, etc. UHMW is a linear high density polyethylene that's 10x heavier than regular high-density polyethylene giving you a rock-solid base for your jig or fixture. UHMW has a low coefficient of friction and is self-lubricating, making it glide over your work surface with little resistance. Plus, this rugged polymer will last for years, as it is highly resistant to abrasions, chemical-resistant, and maintains its high-impact strength even at low temperatures. Choose 24" long stock in 3/4" or 3/8" thicknesses, or a 48" length in 3/8" thickness. All pieces are 4" wide.Technical Details:Choose from 24" long stock in 3/4" or 3/8" thicknesses, or a 48" length in 3/8" thicknessAll pieces are 4" wideThe World's Toughest PolymerIdeal for making jigs and fixtures for your table saw, router table, drill press, and other shop toolsSelf-lubricating stock has a low coefficient of friction, making it glide over work surfacesHigh density polyethylene is 10x heavier than regular high-density polyethylene for stabilityHigh abrasion resistance and high impact strength even at low temperaturesChemical resistant

Big Gator V-Drill Guide - Standard

Big Gator V-Drill Guide - Standard
$24.99

The next best thing to having a drill press in your pocket, the Big Gator V-DrillGuide ensures perfectly straight, perpendicular drill holes in round stock, flat stock, and even directly into corners-all with just a hand drill. The precisely milled V-groove in the bottom of the drill guide centers the holes on pipes, dowels, and outside corners, while the flats allow 90° drilling into flat surfaces-just clamp and drill. 17 standard imperial drill sizes match those in a standard 3/8" drill index-everything from 1/8" to 3/8" in 1/64" increments. Also available for Metric Sizes.Technical Details:The Big Gator V-DrillGuide is made from special nickel-alloyed steel that is heat treated for durability like drill bushings.V-groove along the bottom of the guide allows for perpendicular alignment with all drill sizes on round parts or corners.Bottom surface is precision ground to ensure stability and accurate perpendicular alignment on flat surfaces.Round stock hole alignment marks on one side. Prevents drill bit wander.Prevents drill from drifting off center on round materials.

Big Gator V-Drill Guide - Metric

Big Gator V-Drill Guide - Metric
$24.99

The next best thing to having a drill press in your pocket, the Big Gator V-DrillGuide ensures perfectly straight, perpendicular drill holes in round stock, flat stock, and even directly into corners-all with just a hand drill. The precisely milled V-groove in the bottom of the drill guide centers the holes on pipes, dowels, and outside corners, while the flats allow 90° drilling into flat surfaces - just clamp and drill. Also available for Standard Sizes.17 metric drill sizes: 3, 3.3, 3.5, 4, 4.2, 4.5, 5, 5.5, 6, 6.5, 7, 7.5, 8, 8.5, 9, and 9.5mm.Technical Details:The Big Gator V-DrillGuide is made from special nickel-alloyed steel that is heat treated for durability like drill bushings.V-groove along the bottom of the guide allows for perpendicular alignment with all drill sizes on round parts or corners.Bottom surface is precision ground to ensure stability and accurate perpendicular alignment on flat surfaces.Round stock hole alignment marks on one side.Prevents drill bit wander.Prevents drill from drifting off center on round materials.Includes holes for 17 metric drill sizes: 3, 3.3, 3.5, 4, 4.2, 4.5, 5, 5.5, 6, 6.5, 7, 7.5, 8, 8.5, 9, and 9.5mm.

Drill Press Table Clamp

Drill Press Table Clamp
$21.99

Each clamp comes with screws for mounting plus one mounting block, one 5/16" x 1" T-Bolt and one 1" Round 5/16"-18 Through Hole Knob.

Long Shank Carbide Forstner Bits - Standard Sizes

Long Shank Carbide Forstner Bits - Standard Sizes
$21.99

These professional quality carbide tipped bits are designed to drill flat-bottomed holes. Use with a drill press, or with a hand drill and our exclusive JIG IT Drill Guide. All Forstner bits have a 3/8" diameter shank and require a 3/8" stop collar if used with the JIG IT Drill Guide. These long shanks are 3-7/8" long.Technical Details:Bits feature carbide tips for enhanced durabilityDesigned with spiraled flutes to allow for fast chip removalLong shanks are 3-7/8" longAll bits have a 3/8" diameter shank

Rockler Concealed Hinge Router JIG IT

Rockler Concealed Hinge Router JIG IT
$19.99

Now you can machine 35mm hinge cup holes with your router instead of a drill - a nice option when you don't have space for a drill press. Since your hinge mounting screws serve double-duty as clamps, setup is simple. Just screw it on, rout and repeat!Can be adjusted for either 3mm or 5mm tabs.Designed for Blum hinges.Use with the 5/8" Short-Shank Guide Bushing, (specially designed for 1/4" template stock) and a 1/2" spiral upcut bit.

Rockler Stainless Steel Pizza Cutter Turning Kit, Chrome Finish

Rockler Stainless Steel Pizza Cutter Turning Kit, Chrome Finish
$19.99

Cut any pizza quickly and with ease! Robust, well-balanced hardware 3X the weight of competing cutters and a sharp 4" diameter stainless steel blade make this kit a must have for pizza lovers. Simply make your own creative handle (not included) to complete your cutter with personalized flair. Kit includes a 5/16" threaded insert to attach the handle and to remove it for dishwasher cleaning. Patent pending. Also available in a brass finish.See our complete line of Turning Stock to complete your project. Methods to consider for installing the threaded insert are:Use a 5/16" bolt and double nuts on a drill press. Cut the head off a 5/16" bolt and chuck it in a drill press. Then thread on two nuts and the insert so that it is flush with the end of the bolt. Tighten the two nuts on the insert so it won't spin on the bolt. After the pilot hole is drilled in the stock, clamp your stock with a handscrew or a drill press vise and manually turn the drill press chuck to drive the insert into the stock. DO NOT TURN ON THE DRILL PRESS. The drill press will keep the insert square to the stock as it is threaded in. We also recommend using beeswax, screw lube, or even soap to lubricate the threads on the insert.This process can also be done on a lathe using a three jaw chuck in the tailstock to manually feed the insert into the stock.And finally, if you're using acrylics for your handle, we have found that heating the insert before installing it makes it go in like a hot knife in butter.

Circle Cutter

Circle Cutter
$19.99

This Circle Cutter from General Tools works like an adjustable hole saw, producing precision circles in sheet metal, brass, copper, soft steel, aluminum, plastic, wood and composite materials. It is capable of cutting circles from 7/8'' to 4'' in diameter in material up to 3/4'' thick. Just slide the adjustment rod in or out using the included hex key. The pilot bit ensures a precisely located center for your hole. Comes with replaceable HSS 3/16'' cutting blade and 1/4'' pilot bit3/8'' round shankBody is constructed from heat-treated tool steelAll adjustments are made with included hex wrenchMaximum safe speed is 500 RPMFor use in drill press only

Pages: first pageprev page1 2 3 4 5 6 7next pagelast page