Pages: first pageprev page1 2 3 4 5 6 7next pagelast page

15 Piece Drum Sander Kit and Replacement Sleeves

15 Piece Drum Sander Kit and Replacement Sleeves
$19.99

Sands and polishes virtually any corner curve or irregular shape. Fits hand drills flexible shafts and drill presses.Sleeves attach with a friction grip.Kit contains 5 drums, 5 fine sleeves and 5 coarse sleeves.

Rockler Stainless Steel Pizza Cutter Turning Kit, Pewter Finish

Rockler Stainless Steel Pizza Cutter Turning Kit, Pewter Finish
$19.99

Cut any pizza with ease-a must-have for pizza lovers! Robust, well-balanced hardware is 3X the weight of competing cutters and features a sharp 4'' diameter stainless steel blade. Just add your own custom handle (not included) to top it to your taste. Kit includes a 5/16'' threaded insert that lets you attach the handle or remove it for dishwasher cleaning. A 7/16'' drill bit is required for soft woods or a 1/2'' drill bit for hardwoods. Patent pending. Also available in brass or chrome. See our complete line of turning stock to turn the handle for your pizza cutter. Methods to consider for installing the threaded insert: Use a 5/16'' bolt and double nuts on a drill press. Cut the head off a 5/16'' bolt and chuck it in a drill press. Then thread on two nuts and the insert so that it is flush with the end of the bolt. Tighten the two nuts on the insert so it won't spin on the bolt. After the pilot hole is drilled in the stock, clamp your stock with a handscrew or a drill press vise and manually turn the drill press chuck to drive the insert into the stock. DO NOT TURN ON THE DRILL PRESS. The drill press will keep the insert square to the stock as it is threaded in. We also recommend using beeswax, screw lube, or even soap to lubricate the threads on the insert. This process can also be done on a lathe using a three jaw chuck in the tailstock to manually feed the insert into the stock. Finally, if you're using acrylics for your handle, we have found that heating the insert before installing it makes it go in like a hot knife in butter.

Stainless Steel Pizza Cutter Turning Kit, Brass Finish

Stainless Steel Pizza Cutter Turning Kit, Brass Finish
$19.99

Robust, well-balanced hardware 3X the weight of competing cutters and a sharp 4" diameter stainless steel blade make this kit a must have for pizza lovers. Simply make your own creative handle (not included) to complete your cutter with personalized flair. Kit includes a 5/16" threaded insert to attach the handle and to remove it for dishwasher cleaning. A 7/16'' drill bit is required for soft woods or a 1/2'' drill bit for hardwoods. Patent pending. Also available in a chrome finish.See our complete line of Turning Stock to complete your project. Methods to consider for installing the threaded insert are:Use the pizza cutter/bottle opener mandrel (#43469 Sold Separately) and chuck in your drill press. Tighten the two nuts on the insert so it won't spin on the bolt. After the pilot hole is drilled in the stock, clamp your stock with a handscrew or a drill press vise and manually turn the drill press chuck to drive the insert into the stock. Safety Tip: MAKE SURE DRILL PRESS IS UNPLUGGED. The drill press will keep the insert square to the stock as it is threaded in. We also recommend using beeswax, screw lube, or even soap to lubricate the threads on the insert. This process can also be done on a lathe using a three jaw chuck in the tailstock to manually feed the insert into the stock. And finally, if you're using acrylics for your handle, we have found that heating the insert before installing it makes it go in like a hot knife in butter.

Drill Press Fence Clamp

Drill Press Fence Clamp
$18.99

All the components for a hold-down clamp that can be positioned along a T-slot or T-track in the fence of your drill press table. Each clamp comes with screws for mounting plus one mounting block, one 5/16" x 1" T-Bolt and one 1" Round 5/16"-18 Through Hole Knob.

45 Degree Stainless Steel Miter Gauge

45 Degree Stainless Steel Miter Gauge
$18.99

This solid steel gauge is perfect for quick miter layout and tool setup. Mark 45° linesfor picture frames, corner molding, box constructions and more. Stand it upright andprep saw blades or drill press tables for angled applications. The interior windowmakes marking parallel lines fast and easy. And with a small footprint and lowprofiledesign, it fits easily in tool boxes and shop aprons.Additional features:Precise - Accurate to less than 0.1 mm per 100 mm

Rockler Universal Dust Port Bracket

Rockler Universal Dust Port Bracket
$18.99

Get dust collection at your lathe, chop saw, sanding station and more. This clamping bracket allows you to attach a dust port to almost any surface, including roller stands, sawhorses and workbenches. Included hose clamp works with all 4" hose and fittings. Swivel action allows you to direct suction where you need itFeatures:Clamping bracket with integral knob adjusts from 7/8" to 2-7/8", allowing you to attach a dust hose to almost any roller stand or sawhorse.Works great with Rockler Roller Stands and the Tabletop Dust Fitting, 26412 (sold separately).Used with the Tabletop Dust Fitting (26412), it becomes the perfect dust collection solution for lathes, miter saws, drill presses, disc sanders and more.Included hose clamp works with all 4" hose and fittings.Swivel action allows you to direct suction where you need it.Chop Saw Application: No need to mess with the tiny dust bag that came with your saw - now you can utilize the full strength of your dust collector.Sanding Application: Keeps fine dust away from your face.Lathe Application: Ideal for lathe work, whether benchtop or free-standing.

Standard Shank Metric Forstners

Standard Shank Metric Forstners
$18.99

Drill clean, flat-bottomed holes with your drill press for mounting European-style and other hinges. Both high-speed steel and carbide-tipped bits provide excellent results; carbide tipped bits hold an edge longer. Standard length.

1" and 2" Microplane Rotary Shapers

1" and 2" Microplane Rotary Shapers
$17.99

Razor-sharp teeth quickly shave wood and leave a smooth edge without clogging or heat buildup. Rotary shapers have razor-sharp teeth that quickly shave wood without clogging or heat buildup.Creates shavings - not dust!Hardened stainless steel. 5/16" shank.Can be used at speeds up to 2500 RPM.Easy attachment to drill press.For use on wood, plastic and other non-metallic materials.Includes drum and steel blade.Replacement blades sold separately.Materials being fed into the shaper should be fed left of center to reduce kickback.Always wear safety goggles and gloves.Not for use with routers.Technical Details:Drill attachments measure 3-1/2" total height with shaftCutting blade height: 2-1/8"Fits 5/16" or larger chuckShaft Diameter: 5/16"Weight: 2 oz.Materials: Blades made of 400 series stainless steelRecommended 1000-2000 RPM, do not exceed 2500 RPM

Rockler Fence Featherboard

Rockler Fence Featherboard
$16.99

An absolute must for precision and safety, this tough polymer fence featherboard can be used in both infeed and outfeed applications. The featherboard mounts with the included heavy duty T-bolts and large, easy-to-grip threaded knobs. Fits all Rockler T-slot fences and can be used with material up to 1-1/8" thick.Technical DetailsFits all Rockler T-Slot FencesIdeal for router table and drill press operationsIncludes large threaded star knobs for secure lockdownKnobs' metal threads and T-slot bolts are 5/16" x 18 TPI

Rockler JIG IT Drill Guide

Rockler JIG IT Drill Guide
$16.99

The exclusive JIG IT Drill Guide can be used with a drill press or a hand drill to ensure perfectly aligned holes every time! Use with our Long Shank Forstner Bits (sold separately) to drill flat-bottomed holes.

Drill Press Tool Collector

Drill Press Tool Collector
$15.99

Keeps tools organized and right on hand! No more searching through the tool box for the bit you need- it's clearly visible with the tool collector!Plastic. 11" diameter. Swings out of the way when not in use. (Also a great place to keep that cup of coffee!)

1/2" Plug Cutter

1/2" Plug Cutter
$14.99

Unique spring-loaded self-centering tip guides cutter and prevents walking to cut a smooth, tapered plug for 1/2" holes every time!Technical Details:1/4" quick shank prevents tool from slipping in drill chuck.Works with all 3/8" and 1/2" drive drill presses and handheld drills.Hardened steel for long life.Also available as part of a 3-piece set (39817, sold separately) that includes 5/16", 3/8" and 1/2" cutters.

Woodworker's Journal 25 Jigs and Fixtures, CD

Woodworker's Journal 25 Jigs and Fixtures, CD
$14.99

From shop standards like the crosscut sled and miter sled to specialized attachments such as the multi-purpose tilting drill press fixture and the ''super tenon jig,'' the 25 jigs and fixtures on this CD will have you tackling tasks in a fraction of the time it used to take. Add to that five bonus larger-scale projects, including an ingenious wall-mounted router table that folds flat against the wall to save space, and the ''ultimate miter saw stand,'' which includes a rolling cabinet with storage for tools and lumber, and your shop will be streamlined for optimum efficiency and enjoyment. Universal PDF format makes it easy to print out the project you're working onClear, easy-to-understand how-to photography, technical drawings and step-by-step instructionsEasy navigation, just click on your project in the table of contentsRequires Adobe Reader (free) 25 Jigs and Fixtures: Adjustable Box Joint JIgBenchtop Belt Sander FixtureCrosscut SledCircle Cutting JigCutting Perfect MitersSlot Tenon JigGrinder StandHold-Down MiterUltimate Angle JigMarking GaugeMortise Centering JigMiter Clamping JigPlywood Storage RackRouter Jig for Stopped DadoRound Object Drilling JigSawhorse Outfeed TableSpigot ChuckDrill Press FixtureStopped Through-Dado JigSuper Tenon JigTable-Top DowndraftLattice Cutting JigUltimate Fluting JigUniversal Table Saw JigWorkbench Helper 5 Bonus Projects: Planer CartRolling Tool CaddyUltimate Miter Saw StandUltimate Router TableWall-Mounted Router Table

3/8" Plug Cutter

3/8" Plug Cutter
$12.99

Unique spring-loaded self-centering tip guides cutter and prevents walking to cut a smooth, tapered plug for 3/8" holes every time!Technical Details:1/4" quick shank prevents tool from slipping in drill chuck.Works with all 3/8" and 1/2" drive drill presses and handheld drills.Hardened steel for long life.Also available as part of a 3-piece set (39817, sold separately) that includes 5/16", 3/8" and 1/2" cutters.

1/2" Power Twist Plus Link V-Belt

1/2" Power Twist Plus Link V-Belt
$11.99

The Power Twist Plus Link Belt is a high-performance V-belt that reduces vibration on table saws, drill presses, and other power tools by as much as 35%. It replaces the standard 1/2" V-belt on most machines, and the length can be adjusted by removing links. Whereas traditional drive belts can stretch and become misshapen (creating vibration as they rotate), the Power Twist belt is made up of interlocking segments of polyurethane elastomer and multiple plies of polyester fabric that retain their original shape, thereby reducing vibration. What's more, you can easily add or subtract links to get optimal tension on almost any machine!Technical Details:1/2" wide.Replaces the standard 1/2" V-belt on most machinesCan be adjusted by removing linksMade of interlocking segments of polyurethane elastomer and multiple plies of polyester fabricHigh-performance V-belt reduces vibrationSold by the foot.

Rockler Hold Down Clamp, 5-1/2''L x 1-1/8''W

Rockler Hold Down Clamp, 5-1/2''L x 1-1/8''W
$10.99

These Hold Down Clamps feature non-marring rubber tips that are ideal for working with soft woods, pre-finished panels, or anything that's already been prep sanded. The rubber clamp faces also help to grip the workpiece for better safety and accuracy. In addition, they have a wide aluminum body, allowing for maximum tension. Clamps include a 5-star knob and a 5/16" T-bolt designed to fit into T-tracks on drill presses, router tables and more. The Hold Down Clamp, 5-1/2"L x 3/4"W provides the same great features as the 5-1/2"L x 1-1/8"W version, but in a slimmer width and without the non-marring rubber tips.5-1/2" long x 1-1/8" wide.Crafted of solid anodized aluminum.Clamps material up to 2-1/2" thick.Rubber tips help grip and protect workpiece.5/16" T-bolt is compatible with our Universal T-Track.

Mag-Dro Magnetic Caliper Base

Mag-Dro Magnetic Caliper Base
$10.99

Why buy a specialty after-market calibration gauge when your dial caliper gives you all the precision you need for the basics? This Mag-Dro Magnetic Base adheres to any ferrous surface, and clamps to the shaft of your dial caliper, allowing you to use it as a basic setup gauge on table saws, band saws, drill presses and more. Also great for checking runout on blades and bits.Technical Details:Check for runout on blades or bits or use it to align the fence - the uses are limited only by your imagination.Gives you precise measurementsSaves time in your shop with fast, accurate set-upsFits most 6" calipersWorks on any flat, unpainted steel surfaceIncludes small square metal mounting plate for use with shop made jigs

Replacement 1/4" Cutting Blade

Replacement 1/4" Cutting Blade
$10.99

Replacement 1/4" cutting blade for the adjustable Heavy-Duty Circle Cutter (42887, sold separately), which allows you to use your drill press to make circular cuts 1-3/4" to 7-7/8" in diameter in wood, plastic, brass, copper, aluminum and more.

Pages: first pageprev page1 2 3 4 5 6 7next pagelast page