Pages: first pageprev page1 2 3 4 5 6 7next pagelast page

Arts & Crafts End Tables Downloadable Plan

Arts & Crafts End Tables Downloadable Plan
$7.95

There are many signature features of Mission-style furniture, but one of the more prominent details are mortise and tenon joints where the tenons show. You might think they're difficult to make, but a simple drill press technique and a few chisels are all it really takes. This end table will give you ample opportunity to try these joints on for size.

Tilting Table for the Drill Press Downloadable Plan

Tilting Table for the Drill Press Downloadable Plan
$7.95

Most of the time, we drill holes that are perpendicular to the drill press table. But as soon as you start making chairs, all conventions are off and angled holes are quite common. Making these accurately on a drill press is a hassle, unless you have an easy, reliable way to tilt the table. Our jig makes the process a cinch, and your table never tips.

Deluxe Drum Sander Downloadable Plan

Deluxe Drum Sander Downloadable Plan
$7.95

If you want to build a better mousetrap, the best starting point is a list of the limitations of your old one. As far as drum sanding on a drill press goes, most sanding jigs lack dust control, and the drums tend to clog too soon. This jig addresses both problems: It has a built-in dust collection port, and the drum can be raised or lowered through the tabletop, so you can work with a new, unclogged part of the sleeve as often as needed.

Sanding Drum 1-1/2" by 1-1/2" with 1/4" shank

Sanding Drum 1-1/2" by 1-1/2" with 1/4" shank
$6.99

1-1/2" diameter x 1-1/2" long expanding rubber sanding drum can be used in a hand drill or drill press to smooth curved edges. Tighten the nut on top of the drum counterclockwise to expand the drum and secure the sanding sleeve. Replacement sanding sleeves available in coarse, medium and fine grits.

Dowel Centers-Individual Sizes

Dowel Centers-Individual Sizes
$6.99

Dowel centers allow you to precisely transfer the location of one set of dowel holes to the corresponding holes in the other half of a doweled joint. Just drill one set of holes, slip in the dowel centers and press the joint together. The pins on the dowel centers will precisely mark the hole locations on the other member. Available in four different sizes (each includes eight transfer pins of whichever size you choose): 1/4", 5/16", 3/8" and 1/2".

Sanding Drum 1" by 1" with 1/4" shank

Sanding Drum 1" by 1" with 1/4" shank
$5.99

1" diameter x 1" long expanding rubber sanding drum can be used in a hand drill or drill press to smooth curved edges. Tighten the nut on top of the drum counterclockwise to expand the drum and secure the sanding sleeve. Replacement sanding sleeves available in coarse, medium and fine grits.

Self-Adhesive Measuring Tape

Self-Adhesive Measuring Tape
$5.99

This adhesive-backed measuring tape is ideal for miter saws, radial-arm saws, drill presses or anywhere you need accurate, easy-to-read measurements. Tape is 6' long and available in both left-to-right and right-to-left orientations.1/2" wide x 6' longPeel-and-stick adhesive-backed steelGraduated in increments of 1/32" on one side and 1/16" on the otherAvailable in left-to-right and right-to-left orientations

Hinge Cup Drilling Jigs

Hinge Cup Drilling Jigs
$5.99

Here's an accurate and inexpensive way to set up your drill press for making holes for 35 mm and 26 mm cup hinges.Simply align your fence with the jig and drill. You'll get consistently accurate holes set to the proper depth and the ability to position quickly and easily!Hinge Cup Jig A is used on these hinges:Blum 110° Clip Top HingesBlum 100° Clip On HingesBlum 170° Clip-On HingeBlum 165° Zero Protrusion Snap Closing HingeBlum Thick Door Clip-On Snap Closing 35mm HingesBlum 125° Clip On Face Frame HingesBlum 110° Cross-Corner HingesBlum 95° Blind-Corner HingesHinge Cup Jig B is used on these hinges:Blum Nickel Plated Face Frame HingesHinge Cup Jig C is used on these hinges:Mini Blum Clip-On HingesHinge Cup Jig D is used on these hinges:Blum Bi-Fold Hinge

Famowood Wood Filler-Wood Filler (6 oz)

Famowood Wood Filler-Wood Filler (6 oz)
$5.19

Made from genuine wood flour, these fillers closely emulate the properties of real wood. They can be stained, sawed, drilled, sanded, planed and nailed, just like the real thing. They show no noticeable signs of shrinking or cracking, so you'll only have to apply it once for a smooth repair. It spreads smoothly and evenly, and sinks into gaps. No mixing is required, and it dries in only 15 minutes. Suitable for interior or exterior use. Available in 10 colors.Instructions for use:Match wood filler color to unfinished wood. Always test filler, stain and finish combination on small area.Press wood filler into defect.When dry, sand flush with surrounding surfaces.Sand and finish after approximately 15 minutes.Use Famowood Solvent (54684) for cleanup.Over time, the filler in the can may thicken. Use Famowood Solvent (54684) to restore wood filler to its original consistency.

Sanding Drum 3/4" by 1" with 1/4" shank

Sanding Drum 3/4" by 1" with 1/4" shank
$4.99

3/4" diameter x 1" long expanding rubber sanding drum can be used in a hand drill or drill press to smooth curved edges. Tighten the nut on top of the drum counterclockwise to expand the drum and secure the sanding sleeve. Replacement sanding sleeves available in coarse, medium and fine grits.

Simplex Concealed Hinge - Black

Simplex Concealed Hinge - Black
$4.49

A simple, inexpensive concealed hinge for inset doors. Just drill a hole and press the bushing in place; the hinge pin pivots in the bushing. With no mortising required, installation is easy. The plate simply mounts to the surface of the door. Slots in plate allow side-to-side adjustability. Steel hinge with plastic bushing.Hinge is 40mm wide x 17mm high x 16mm deep.Requires 8.5mm (approximately 11/32") drill bit.Includes two screws.Sold in pairs.

PG2000 Router Bit Bearing Lube Pen

PG2000 Router Bit Bearing Lube Pen
$3.99

Apply lubrication to router bit bearings, table saw trunnions, drill press gears and more with pin-point accuracy. Provides long lasting, smooth operation of any metal-to-metal mechanism. Lubricant also penetrates and cleans moving parts.

Sanding Drum 1/2" Diameter and 1/2" Long

Sanding Drum 1/2" Diameter and 1/2" Long
$2.99

1/2" diameter x 1/2" long expanding rubber sanding drum can be used in a hand drill or drill press to smooth curved edges. Tighten the nut on top of the drum counterclockwise to expand the drum and secure the sanding sleeve. Replacement sanding sleeves available in coarse, medium and fine grits.

1" Round Knob for Shop Jigs-Threaded insert

1" Round Knob for Shop Jigs-Threaded insert
$2.49

These 1" Round Knobs with Bolt are ideal for jigs, router tables, drill presses and other similar applications. They work great with our T-Slot System. Choose from threaded insert or 1" bolt.

1'' Round Knob for Shop Jigs

1'' Round Knob for Shop Jigs
$1.99

These 1" Round Knobs with Bolt are 1/4 20 tpi and are ideal for jigs, router tables, drill presses and other similar applications. Length of bolt is 1''. They work great with our T-Slot System.

5-Star Jig Knobs

5-Star Jig Knobs
$1.99

Five-star knobs are the true Lincolns of jig knobs. With their rounded edges, comfortable finger holds and smooth finish, they're extremely easy on the hands and provide plenty of torque for use as jig knobs on fixtures, router tables, drill presses and more. These 5-Star Knobs are available with a through-hole and threaded insert for use with a T-bolt and T-slot or T-track, or with a 1" threaded stud. Choose from three different threadings.

Salt Shaker Cap

Salt Shaker Cap
$1.69

This is a fun, fast project that makes a great gift. Just turn your blank, drill a hole with a 1-1/4" Forstner Bit (21207, sold separately), and press the cap into place. Sold individually.

Swing-Away Drill Press Organizer Downloadable Plan

Swing-Away Drill Press Organizer Downloadable Plan
$1.00

This handy shop helper mounts directly to the drill press column, and the swing arm permits the shelf to be located with arm's reach so bits are close at hand. But, if necessary, the arm and shelf can also be pivoted out of the way.

Pages: first pageprev page1 2 3 4 5 6 7next pagelast page