Pages: first pageprev page1 2 3 4 5 6 7 8 9 10next pagelast page

Jet Deluxe Xacta 3HP 10'' Table Saw w/50'' Fence

Jet Deluxe Xacta 3HP 10'' Table Saw w/50'' Fence
$2,449.99

If you've ever wondered about what a table saw can really do, look no further. Introducing the new JET 10" DELUXE XACTA SAW. The Quick release riving knife and integrated arbor lock keeps the operator safe and more efficient. The DELUXE XACTA SAW offers an upgraded Poly-V belt drive system for smooth operation and optimal power transfer, a fully shrouded blade for highly efficient dust collection. The 26" x 30" wings and deeper table gives you even more cast iron to work on. A built-in 12.5" x 18" x 4 " storage drawer sealed from the cabinet keeps your necessities within arms reach, also includes an on-board fence and miter gauge storage. Quick release riving knife greatly reduces binding/kickback riskPush button arbor lock (patent pending) for rapid blade changeShrouded Blade increases dust collection efficiencyStandard 11" left and right cast iron extension wings provides the largest table surface in its classPoly-V drive belt system delivers efficient, quiet operationEXCLUSIVE 50" Commercial XACTA Fence II with T-square designQuick release riving knife greatly reduces binding/kickback riskPush button arbor lock (patent pending) for rapid blade changeShrouded Blade increases dust collection efficiencyStandard 11" left and right cast iron extension wings provides the largest table surface in its classPoly-V drive belt system delivers efficient, quiet operationRail-mounted magnetic switch is easy to reach and provides overload protectionEnclosed cabinet with built-in sealed storage drawerHinged motor cover on cabinet gives quick access to the motor and beltsDeluxe miter gauge with adjustable positive stops and large soft grip handles provides large crosscutting capacity and accurate mitersHeavy-duty chrome plated handwheels contribute to smooth trunnion/arbor movementBuilt-in 4" port for dust collectionPrecision ground high luster cast iron table tops with front edge bevel for hassle-free workpiece positioningLeft tilt, Wide stance heavy-duty trunnion for stability and smooth blade positioningIndependent leaf safety guard protects operator from blade while cutting, even at 45° tiltArbor wrenchPowder coated paint for a long-lasting, chip-resistant finish

Jet 20'' 3HP Planer

Jet 20'' 3HP Planer
$2,345.99

The JET JWP-208-1 planer quickly and quietly transforms rough lumber into smooth boards, with a full 20" planing width. Its heavy-duty cast iron and steel construction keeps the workpiece steady and supported, while the conveniently located two-speed gear box allows for quick and easy feed rate adjustments. This machine means business with a powerful 3 HP induction motor. You'll appreciate the sets of three steel infeed and outfeed rollers to help prevent annoying snipe. A large cast-iron table with smooth-as-glass surface makes this planer a beautiful addition to the shop. And since planers kick up a lot of dust, we made dust collection easy with an exclusive angled 4" dust port to keep your hose out of the way. Four high-speed steel cutter knives produce faster, smoother cutting Heavy-duty cast iron and steel construction for added strength and durabilityTwo-speed gear box with automatic chain tensioner lets you adjust the feed rate to meet your needsLarge, cast iron, precision ground table for precise workpiece support Powerful 3 HP TEFC induction motor with three V-belt transmission for smooth and consistent powerSets of three steel infeed and outfeed rollers to help in the prevention of snipePositive gear drive moves table quickly and accuratelyWork table is precision-ground and polished for consistently smooth operationLarge handwheel with positive gear drive allows for quick and accurately table adjustments1/16" increment height scale lets you make the most precise adjustments for fine cuts5" dust port provides efficient chip and dust collectionOne-piece welded steel base offers solid support and stabilityMagnetic controls provide long life and reliabilityProduct Specifications:Model Number: JWP-16OSBrand: JetHeight: 30"Width: 22"Length: 32"Net Weight: 531 lbsMaximum Planing: 16"Maximum Planing Thickness: 6"Max. Full Width Depth of Cut: 1/8"Maximum Depth of Cut: 3/16"Minimum Planing Length: 8"Cutterhead Diameter: 2-7/8"Cutterhead Speed: 4500 RPMCuts Per Minute: 13500Feed Rate: 16 and 20 FPMNumber of Knives: 3Dust Port Diameter: 4"Dust Collection Min. CFM Required: 400 cu.ft/minBlade Size: 16-1/8" x 1" x 1/8"Amps: 15 AMotor Power: 3 HPMotor Phase: 1 PhMotor Voltage: 230 VStandard Equipment24V magnetic controlsFour High Speed Steel knivesDust hood with 5" portKnife setting gaugeOne-piece welded base

Laguna 3 HP Mobile Cyclone Auto-Clean Dust Collector (MDC0680)

Laguna 3 HP Mobile Cyclone Auto-Clean Dust Collector (MDC0680)
$2,299.99

If you're looking for the pinnacle of efficiency and ease in a dust collection system, consider the Laguna 3 HP Mobile Cyclone Auto-Clean. In addition to offering a whopping 2200 CFM of dust collection, it also features automatic cleaning of the filter after each use. A small motor rotates the cleaning aggregate for 30 seconds in forward and 30 seconds in reverse. This saves time and increases efficiency, especially in shops that generate a lot of dust. Like other Mobile Cyclones, the cyclone design allows the wood particles and dust to be separated from the air stream before going to the pleated cartridge filter. This provides superior dust collection and air filtration, and prevents wood particles from passing through the efficient fan unit. Discover the difference today with the power and quality of Laguna!Features:Small filter cleaning motor operates for 1 minute after each useDust is collected in a 60 gallon metal collection drum which features quick lift levers and wheels for quick, easy emptying.Steel frame allows the disposable bags to stay in place, ensuring maximum capacity, and preventing them from getting sucked up into the cyclone when emptyHigh Frequency remote control allows you to start/stop the machine from almost anywhere in the shop and does not require line of sightDoes not interfere with fluorescent lightsThe entire unit rides on swiveling casters making it easy to move around your shopVery quiet operation of only 78 dB, protecting your ears as well as your lungs

SawStop 1.75 HP Professional Table Saw w/30'' Fence, Rails, and Extension Table

SawStop 1.75 HP Professional Table Saw w/30'' Fence, Rails, and Extension Table
$2,299.00

The SawStop 1.75HP 10" Professional Cabinet Saw is engineered to fit the unique demands of the avid hobbyist in a home setting. Delivering the peerless fit and finish of the Professional Cabinet Saw, this saw's 110V power and optimized footprint make it ideal for the many challenges of a home shop. With SawStop's legendary safety system, uncompromising quality and industry-leading dust collection, the 110V Professional Cabinet Saw is engineered to be the cornerstone of a high-end home shop. Safety System: Automatically stops and retracts the blade on contact with skin.Blade Guard: Micro Blade Guard's multiple shield plates protect from flying debris.Tool-Free Quick-Change Blade Guard Mount: Make fast and easy transitions between blade guard and riving knife with no tools required.Quick-Release, Zero-Clearance Insert: Features a quick-release mechanism for tool-free access to the saw cavity.Award-Winning Dust Collection: Patent pending under table advanced airflow control system captures dust at the blade and directs it out of the saw through the dust collection port.Fence and Rails: The standard 30" Premium Fence and Rail is a high quality T-Style Design, featuring smooth operation and firm lockdown. The 36" or 52" T-Glide professional fence/rail systems are also available.Fit and Finish: Attention to detail, premium craftsmanship and rigorous engineering combine to create a saw you'll love to use.Precision Alignment System: Adjust the blade and table alignment with precision not found on other saws.NOTE: No International shipping available on SawStop items. SawStop items can only be shipped within the Continental United States. SawStop, the SawStop blade logo, and the configurations of SawStop products are either registered trademarks or trademarks of SawStop, LLC and are used with permission.

Jet Deluxe Xacta 3HP 10'' Table Saw w/30'' Fence

Jet Deluxe Xacta 3HP 10'' Table Saw w/30'' Fence
$2,294.99

If you've ever wondered about what a table saw can really do, look no further. Introducing the new JET 10" DELUXE XACTA SAW. The Quick release riving knife and integrated arbor lock keeps the operator safe and more efficient. The DELUXE XACTA SAW offers an upgraded Poly-V belt drive system for smooth operation and optimal power transfer, a fully shrouded blade for highly efficient dust collection. The 26" x 30" wings and deeper table gives you even more cast iron to work on. A built-in 12.5" x 18" x 4 " storage drawer sealed from the cabinet keeps your necessities within arms reach, also includes an on-board fence and miter gauge storage.EXCLUSIVE 30" Commercial XACTA Fence II with T-square designQuick release riving knife greatly reduces binding/kickback riskPush button arbor lock (patent pending) for rapid blade changeShrouded Blade increases dust collection efficiencyStandard 11" left and right cast iron extension wings provides the largest table surface in its classPoly-V drive belt system delivers efficient, quiet operationRail-mounted magnetic switch is easy to reach and provides overload protectionEnclosed cabinet with built-in sealed storage drawerHinged motor cover on cabinet gives quick access to the motor and beltsDeluxe miter gauge with adjustable positive stops and large soft grip handles provides large crosscutting capacity and accurate mitersHeavy-duty chrome plated handwheels contribute to smooth trunnion/arbor movementBuilt-in 4" port for dust collectionPrecision ground high luster cast iron table tops with front edge bevel for hassle-free workpiece positioningLeft tilt, Wide stance heavy-duty trunnion for stability and smooth blade positioningIndependent leaf safety guard protects operator from blade while cutting, even at 45° tiltArbor wrenchPowder coated paint for a long-lasting, chip-resistant finish

Powermatic 8'' Parallelogram Jointer

Powermatic 8'' Parallelogram Jointer
$2,244.99

The 8" Parallelogram Jointer offers performance and value in a machine loaded with features. Each machine has an extra long 82" bed length for better work support and is equipped with an innovative single handwheel design that tilts the fence in and out with positive stops at +/-45 and 90 degrees. A non-mar insert in the fence contacts the table to avoid scratching the surface during adjustments. The parallelogram design keeps the table in close proximity to the cutterhead for improved finish and allows for a fast depth of cut adjustment. This design also insures the table remains perfectly parallel, even after years of tough duty. The 1/8" depth limiter control knob gives you quick adjustment ability and safety. A quick twist of the knob will disable this feature. This jointer features a Powermatic controlled chip 3-knife cutterhead for a safe, smooth cut every time. Powerful 2HP or 3HP motors are totally enclosed in a heavily constructed steel stand providing plenty of power for the most demanding jobs.Extra long 82" table for expanded work support Parallelogram design helps maintain table parallelism and eases table raising and lowering Handwheel with worm gear system for precise fence tilting (Patented) 1/8" depth of cut limiter for fast table positioning High-mount switch for operator convenience No-mar fence insert protects tableProduct Specifications:Powermatic Part Number: 1610079Model Number: PJ882Brand: PowermaticHeight: 44"Width: 28"Length: 84"Net Weight: 610 lbs.Cutting Capacity (W x D): 8" x 1/2"Cutterhead Speed: 7000 RPMCuts Per Minute: 21000Cutterhead Diameter: 3-1/16"Number of Knives: 3(Helical/Standard): Standard Knife Size (L x W x T): 8" x 11/16" x 1/8"Rabbeting Capacity: 1/2"Table Height: 31-5/16"Table Size (L x W): 82" x 8"Infeed Table Length: 44"Outfeed Table Length: 38"Fence Size (L x H): 38-3/16" x 4-3/4"Fence Tilts: 45 degreesFence Positive Stops: -45 deg., 45 deg., 90 deg.Dust Port Outside Diameter: 4"Dust Collection Minimum: 450 cu.ft/minCFM Required: Motor Power: 2 HPMotor Phase: 1 PhMotor Voltage: 230 VMotor Current: 9 A

Powermatic PM1000 1-3/4 HP Table saw, 1-Phase With 52" Accu-Fence System

Powermatic PM1000 1-3/4 HP Table saw, 1-Phase With 52" Accu-Fence System
$2,099.99

The Powermatic PM1000 takes legendary performance and design principles from its larger predecessors, and packs them into a dynamic 115 volt machine. That means that more woodworkers than ever before will be able to enjoy the capability and rugged performance of a Powermatic cabinet saw, without requiring expensive electrical upgrades. With only a few minutes of use, the careful design and engineering put into every part of this saw become clearly apparent. Heavy cast iron throughout cuts vibration and noise. The famed Accu-Fence slides smoothly and locks securely, while the heavy 7'' hand wheels turn with ease. The blade guard raises and tilts in unison with the blade, and the hands-free power button with safety key makes for easy starts and stops. The PM1000 is available paired with your choice of two fences: 30'' (49024, sold separately) and 52''.Features:A rugged cabinet saw that only requires 115V power.Blade surround and collection hose provide an unobstructed path, maximizing dust collection.Conveniently located hands-free power switch.Tool-less guard assembly with independent side leaves is easy to use, maximizing safety.Blade guard raises, lowers and tilts in unison with the blade. Splitter and riving knives are mounted directly to blade mechanism, keeping gap between them and the blade consistent during height and angle adjustments.Sturdy miter gauge pivots 60 degrees to either side, allowing easy adjustment for a full range of cuts.Exclusive AccuFence provides rigidity and precision.The poly-V belt drive system reduces vibration and maximizes efficiency. Large, ergonomically designed 7'' handwheels provide momentum, making blade height and bevel adjustments easy.Arbor lock allows for one-handed blade changes with minimal tools.Cast iron work surface features a beveled edge.Bevel scale is conveniently located with large, easy-to-read numbers.Hinged motor cover provides quick access to the interior of the cabinet.

Jet 3HP Shaper, 1/2'' & 3/4'' Spindles

Jet 3HP Shaper, 1/2'' & 3/4'' Spindles
$2,039.99

The new model JWS-25X Shaper features a powerful 3HP motor with magnetic controls. The large 25"x 25-1/2" precision ground cast iron table provides plenty of support. Safe, easy cutter set up is assisted by a positive detent spindle lock. The independently adjustable left and right fence has a built in 4" dust port. Two-speeds let you select the best speed and torque for different cutter diameters Independently adjustable left and right fences, standard with a micro adjust control for precise positioning Large 25" X 25-1/2" precision ground cast iron table provides a durable work area Poly-V-belt transfers maximum power to the spindle Extruded aluminum fence comes with T-Slots and 2 feather board hold-downs Reversible spindle speeds for diverse shaping jobs Powerful 3HP, 1Ph motor with magnetic controls Starting pins for irregular shaping Extra large chrome handwheel is conveniently located for fast, easy and accurate spindle height adjustments 4" Dust port built into fence for convenient hookup to any dust collection system Spindle lock for safe and easy cutter set up Spindle height scale 5 Year Warranty Brochure

Jet Shaper with 1/2'' & 3/4'' Spindles

Jet Shaper with 1/2'' & 3/4'' Spindles
$2,024.00

If you're looking for a space-saving shaper for your shop, the new JET JWS-25CS Shaper is what you need. This compact powerhouse features a 8000 and 10000 RPM reversing 3HP motor. The large 25" by 25" precision ground cast iron table provides a large, durable, work area. Safe, easy cutter set up is assisted by a positive detent spindle lock. The independent left and right fences feature micro-adjustment, and a built in 4" dust port. If you feel you just don't have the space, the nominal 23" x 25" footprint of this workhorse is sure to change your mind. Put the new JET JWS-25CS Shaper in your shop today, you'll know why JET products are "Built Better to Build Better."Starting Pins for irregular shapingForward/reverse switch for left and right hand operation Two-speed step pulley drive lets you select the best speed and torque for different cutter diameters Independent left and right fences feature micro-adjustment and have zero-clearance capability Extra-large handwheel is conveniently located for fast, easy and accurate spindle height adjustments Positive detent spindle lock allows safer, easy cutter set-up 4" dust port connects to your collection system to keep your workplace dust and debris-free Fully enclosed, heavy-duty steel stand has a removable cover for easy motor access Unique ratcheting style levers allow you to micro-adjust your fence assembly to your exact needs Powerful 3HP motor and heavy-duty magnetic controls deliver smooth, consistent power on even the heaviest jobs 25" x 18" solid cast iron table comes with an additional 25" x 7" extension wings to handle extra large work pieces Four adjustable work hold-downs to secure your work while shaping 1/2" and 3/4" interchangeable spindles and router bit collets for use with shaper cutter and router bitsProduct Specifications:Jet Part Number: 708322Model Number: JWS-25CSBrand: JetHeight: 40"Width: 29"Length: 23"Net Weight: 338 lbs.Spindle Speed: 8,000 and 10,000 RPMSpindle Diameter: 1/2" and 3/4"Spindle Travel: 3Table Size: 25" x 25"Table Height from Floor: 34"Table T-Slot: 3/4" x 3/8"Table Opening Diameter: 6-7/8"Table Insert Opening Diameter: 1-5/8", 3", and 3-1/2"Fence Size (L x H): 9-1/2" x 2-3/4"Dust Port Outside Diameter: 4"Motor Power: 3 HPMotor Voltage: 230 VPrewired Voltage: 230 VMotor Current: 16 AMotor Phase: 1 PhStandard Equipment:1/2" and 3/4" interchangeable spindlesWorkpiece hold-downsT-slot mitre gaugeMicro-adjustable fenceRigid, one-piece closed standCutter guard4" dust port7" x 25" cast iron extension wing

Powermatic PM1000 1-3/4 HP Table saw, 1-Phase With 30" Accu-Fence System

Powermatic PM1000 1-3/4 HP Table saw, 1-Phase With 30" Accu-Fence System
$1,999.99

The Powermatic PM1000 takes legendary performance and design principles from its larger predecessors, and packs them into a dynamic 115 volt machine. That means that more woodworkers than ever before will be able to enjoy the capability and rugged performance of a Powermatic cabinet saw, without requiring expensive electrical upgrades. With only a few minutes of use, the careful design and engineering put into every part of this saw become clearly apparent. Heavy cast iron throughout cuts vibration and noise. The famed Accu-Fence slides smoothly and locks securely, while the heavy 7'' hand wheels turn with ease. The blade guard raises and tilts in unison with the blade, and the hands-free power button with safety key makes for easy starts and stops. The PM1000 is available paired with your choice of two fences: 30'' and 52'' (45878, sold separately).Features:A rugged cabinet saw that only requires 115V power.Blade surround and collection hose provide an unobstructed path, maximizing dust collection. Conveniently located hands-free power switch.Tool-less guard assembly with independent side leaves is easy to use, maximizing safety.Blade guard raises, lowers and tilts in unison with the blade.Splitter and riving knives are mounted directly to blade mechanism, keeping gap between them and the blade consistent during height and angle adjustments.Sturdy miter gauge pivots 60 degrees to either side, allowing easy adjustment for a full range of cuts. Exclusive AccuFence provides rigidity and precision.The poly-V belt drive system reduces vibration and maximizes efficiency. Large, ergonomically designed 7'' handwheels provide momentum, making blade height and bevel adjustments easy.Arbor lock allows for one-handed blade changes with minimal tools.Cast iron work surface features a beveled edge.Bevel scale is conveniently located with large, easy-to-read numbers.Hinged motor cover provides quick access to the interior of the cabinet.

Jet 15'' Planer w/Quick-Change Knives

Jet 15'' Planer w/Quick-Change Knives
$1,989.99

Every serious woodworker needs a planer in the shop, but nobody likes to deal with the hassle of changing the knives. Enter the JET JWP-15DX Planer with quick change knives that align themselves, no adjustment required. Plus, each knife has two cutting edges to save you a little cash and a lot of frustration. This sweet machine features a monster 3-horsepower induction motor with two speed gear box to adjust your feed rate for a better finished surface. Its rock-solid table is constructed of cast iron and features infeed and outfeed table extensions with smooth-moving rollers that virtually eliminate snipe. And because even the coolest power planer is one of the messiest machines on the planet, JET's exclusive angled 4" dust port keeps your dust hose out of the way for easy hookup on your shop's dust collection system.Cutterhead with exclusive Quick change knives that align themselves without any adjustmentHeavy-duty cast iron and steel construction for added strength and durabilityTwo-speed gear box with automatic chain tensioner lets you adjust the feed rate to meet your needsLarge, cast iron, precision ground table for precise workpiece supportPowerful 3 HP TEFC induction motor with three V-belt transmission for smooth and consistent powerInfeed and outfeed table extensions with rollers help in the prevention of snipeTwo-speed gear box lets you adjust the feed rate to meet your needsWork table is precision-ground and polished for consistently smooth operationLarge handwheel with positive gear drive allows for quick and accurately table adjustmentsHeavy-duty table locks keep the table secure during useInternal caster system for mobilityExclusive angled 4" dust port keeps your dust hose out of the wayHeavy-duty steel closed stand with lockable casters for increased portabilityMagnetic controls provide long life and reliability

Jet 8'' Jointer w/Helical Head

Jet 8'' Jointer w/Helical Head
$1,939.99

It's time to skip the hand tools and graduate to the JET JJ-8HH 8" long bed jointer. This beast boasts a helical insert cutterhead with staggered carbide inserts, yet its 2HP motor runs quietly and smoothly. Its exclusive front-mounted table adjustment handwheels make quick, easy and accurate corrections. An exclusive two-way tilting fence with positive stops at 45° and 90° make bevel operations smooth. Extra-long heavy-duty cast iron infeed and outfeed tables with precision-machined finish allow jointing of longer boards without tipping. Best of all, it comes with our JET industry-leading customer service professionals standing by to help from setup to output.Helical cutterhead with indexable carbide inserts for a superior finish and quieter cutHeavy-duty cast iron infeed and outfeed tables with precision machined finishTwo-way tilting fence with positive stops at 45 degrees and 90 degrees to handle bevel operationsLarge, heavy-duty table adjustment handwheel has a locking knob for quick, easy and secure table height correctionsBuilt-in dust chute with 4" port connects to your collection system for efficient dust/chip disposalCenter fence controls are conveniently mounted to allow quick adjustmentsPowerful 2HP motor easily handles the toughest jointing tasksHeavy-duty, one-piece steel closed stand includes mounting tabs for increased stability

SawStop Contractor Table Saw w/52'' Fence, CNS175-TGP52

SawStop Contractor Table Saw w/52'' Fence, CNS175-TGP52
$1,899.00

The SawStop 110V, 1.75HP 10" Professional Contractor Saw is engineered to fit the unique demands of the avid hobbyist in a home setting. Delivering the peerless fit and finish of the Professional Cabinet Saw, this saw's 110V power and optimized footprint make it ideal for the many challenges of a home shop. With SawStop's legendary safety system, uncompromising quality and industry-leading dust collection, the 110V Professional Contractor Saw is engineered to be the cornerstone of a home shop.NOTE: No International shipping available on SawStop items. SawStop items can only be shipped within the Continental United States. SawStop, the SawStop blade logo, and the configurations of SawStop products are either registered trademarks or trademarks of SawStop, LLC and are used with permission.Technical Details:Motor: 1.75 hp, 1 phase, 110 V, 14 AWeight: 381 lbs (table saw only)Max. rip, right of blade: 52"Cabinet footprint: 19 3/8"W x 19 3/8"DCast iron table: 20"W x 27"D, 44"W x 27"D (w/ extension wings)Stamped steel extension wing: 12"W x 27"DBlade: 40-tooth, professional grade, 5/8" arborBlade diameter: 10"Blade tilt: LeftBlade kerf: 0.118" (3mm)Blade plate thickness: 0.078" (2mm)Max. depth of cut, blade at 0°: 3-1/8" Max. depth of cut, blade at 45°: 2-1/4"Max. rip, left of blade: 12"Dado diameter: 8" (requires a separate brake cartridge and table insert)Dado max. width: 13/16" Arbor diameter at blade: 5/8"Main bearing size: 62mm OD x 30mm ID Second bearing size: 52mm OD x 25mm IDTable in front of blade (max. elevation): 10-1/4"Table behind blade (max. elevation): 7-1/2"Arbor runout: 0.001" Maximum allowable runoutBlade lateral movement over full elevation range: 0.006" MaximumTable flatness measured diagonally: 0.010" Maximum gapOverall table and extension wing flatness: 0.025" maximum gapBlade alignment with miter slot: 0.010" Maximum displacementDeviation of miter gauge indexing stops from actual: ½0.25°Alignment between spreader and blade: 0.010" Maximum differenceMiter slots: T-shaped, 3/4" at top, 1" at bottom, 3/8" deepDust collection port diameter: 4"Riving knife / splitter thickness: 0.078" (2mm)Blade guard: polycarbonate, extends only 5/8" to right of bladeInsert: zero clearance, steel core, ABS surfacesHand wheels: 7" diameter, cast iron with chrome handleBelts: 2 V-ribbed belts - arbor belt is static dissipative

Jet 14'' 3HP Steel Frame Band Saw (714550)

Jet 14'' 3HP Steel Frame Band Saw (714550)
$1,799.99

With 3 HP, a whopping 13-1/2'' of resaw capacity, industrial build quality and conveniences such as tool-free blade guide adjustments and a quick-release blade tensioning system, Jet's 14'' 3HP Band Saw is poised to make a big impression, with a small footprint. The fence has been redesigned with a laser-etched scale and is micro-adjustable for incredible precision when ripping and resawing veneers and thin boards. Change blades quickly with one giant quick-release lever. Enjoy a better blade guard, super-efficient dual dust ports and a fence faceplate that rotates easily from the resawing position to standard ripping. With these features and more, this bandsaw will help you achieve a greater level of performance than ever before.Features: Redesigned fence with laser etched scale and micro-adjust featureTwo-position faceplate provides appropriate support for every cutTool-free blade guide adjustmentsConveniently located dual dust collection portsSturdy cast iron wheels feature a shallow crown and polyurethane tiresHeavy-duty quick-release tensioning mechanismFour-sided blade guardBlades can be removed out the front of the table-no bending or angling requiredRound table insert features leveling screws for perfect flatness with the tableNo assembly required

Laguna 3 hp Mobile Cyclone Dust Collector

Laguna 3 hp Mobile Cyclone Dust Collector
$1,799.00

If you're serious about woodworking, you know the importance of safety and keeping a clean shop. Now you can rely on Laguna Tools for both with its 3HP Mobile Cyclone System. It delivers the power and quality to separate dust and fine particles from the air you breathe, making your shop a safe shop!Features:Dust and debris is collected in a 60 gallon metal collection drumQuick-release collection drum with separate wheels for quick and easy emptyingRemote control to start the machine from anywhere in your shopAllows wood particles and dust to be separated from the air stream before going to the pleated cartridge filterSuperior dust collection and air filtration so that the wood particles do not pass through the efficient fan unitDust is collected in a 60 gallon metal collection drum which features quick release and separate wheels for quick and easy emptyingIncludes a quick-release handle that makes it quick and easy to empty and remove the pleated filterNegative pressure hose is fed to the bottom of the drum to ensure the plastic bag remains inside the drumRemote control allows you to start the machine from anywhere in the shop saving you time and stepsIndustrial casters allow this machine to move easily around your shopVery quiet operation, protecting your ears as well as your lungs

SawStop Contractor Table Saw w/36'' Fence, CNS175-TGP36

SawStop Contractor Table Saw w/36'' Fence, CNS175-TGP36
$1,799.00

The SawStop 110V, 1.75HP 10" Professional Contractor Saw is engineered to fit the unique demands of the avid hobbyist in a home setting. Delivering the peerless fit and finish of the Professional Cabinet Saw, this saw's 110V power and optimized footprint make it ideal for the many challenges of a home shop. With SawStop's legendary safety system, uncompromising quality and industry-leading dust collection, the 110V Professional Contractor Saw is engineered to be the cornerstone of a home shop. NOTE: No International shipping available on SawStop items. SawStop items can only be shipped within the Continental United States. SawStop, the SawStop blade logo, and the configurations of SawStop products are either registered trademarks or trademarks of SawStop, LLC and are used with permission.Technical Details:Motor: 1.75 hp, 1 phase, 110 V, 14 AWeight: 365 lbs (table saw only)Max. rip, right of blade: 36"Cabinet footprint: 19 3/8"W x 19 3/8"DCast iron table: 20"W x 27"D, 44"W x 27"D (w/ extension wings)Stamped steel extension wing: 12"W x 27"DBlade: 40-tooth, professional grade, 5/8" arborBlade diameter: 10"Blade tilt: LeftBlade kerf: 0.118" (3mm)Blade plate thickness: 0.078" (2mm)Max. depth of cut, blade at 0°: 3-1/8" Max. depth of cut, blade at 45°: 2-1/4"Max. rip, left of blade: 12"Dado diameter: 8" (requires a separate brake cartridge and table insert)Dado max. width: 13/16" Arbor diameter at blade: 5/8"Main bearing size: 62mm OD x 30mm ID Second bearing size: 52mm OD x 25mm IDTable in front of blade (max. elevation): 10-1/4"Table behind blade (max. elevation): 7-1/2"Arbor runout: 0.001" Maximum allowable runoutBlade lateral movement over full elevation range: 0.006" MaximumTable flatness measured diagonally: 0.010" Maximum gapOverall table and extension wing flatness: 0.025" maximum gapBlade alignment with miter slot: 0.010" Maximum displacementDeviation of miter gauge indexing stops from actual: ½0.25°Alignment between spreader and blade: 0.010" Maximum differenceMiter slots: T-shaped, 3/4" at top, 1" at bottom, 3/8" deepDust collection port diameter: 4"Riving knife / splitter thickness: 0.078" (2mm)Blade guard: polycarbonate, extends only 5/8" to right of bladeInsert: zero clearance, steel core, ABS surfacesHand wheels: 7" diameter, cast iron with chrome handleBelts: 2 V-ribbed belts - arbor belt is static dissipative

Jet 18'' 1.75HP Bandsaw w/Quick Tension

Jet 18'' 1.75HP Bandsaw w/Quick Tension
$1,784.99

This 18" bandsaw has been a leader since it's introduction many years ago. Now upgrades with new attractive styling and a three position quick tensioner it will again pull ahead of the competition.Features:Triangular design frame provides superior column rigidity12-1/4" Resaw capacity for cutting large pieces of wood, slicing veneers and cutting book matched panels19" x 19" precision ground cast iron table for added stability and work support 4" dust port allows for direct connection of dust collection systemPrecision computer balanced wheels eliminate vibration for accurate blade tracking Quick release blade tensioning with two settings for ultimate convience. One setting to release cutting tension and a second release setting for blade change.Upper and lower ball bearing, micro-adjustable blade guides for proper support during the cut of different size boardsTool-less, indpendently adjustable ball bearing guide system for for quick and easy adjustments and smooth operation8-spoke band wheels computer balanced to spin true without vibrationRigid, heavy-duty guide post with rack and pinion adjustment for extra blade supportAll cast iron handwheels make smooth, easy blade adjustments with less effort3/4", 4 TPI woodworking blade is included so you can start cutting right awayBlade tracking window and light colored tire provide clear view of blade during trackingDual locking cabinet doors allow access to blade when necessaryBlade tension scale allows precise blade tensioningSingle knob tracking adjustment simplifies the blade tracking processExclusive quick-release, precision T-square style rip fence with resaw post

Powermatic Table Saw w/50'' Fence & Riving Knife

Powermatic Table Saw w/50'' Fence & Riving Knife
$1,699.99

The 64B table saw, with left tilt arbor, offers 1-3/4 horsepower in dual voltage to meet the demands of the professional contractor. The transparent blade guard has independent leaves, and the quick release riving knife reduces chance of kickback. A low profile riving knife is included for non-through cuts. An arbor lock is accessed from above the table, eliminating the need for dual blade wrenches. The T-slot miter gauge has rack-and-pinion angle setting, positive stops, and extension plate for expanded workpiece support. The 64B has cast iron table and wings with front edge bevel, and the working area is further expanded by the melamine-surfaced wood extension table. Storage hooks on the stand keep your accessories within reach. Riving knife maintains close blade proximity to reduce chance of kickback Micro-adjust miter gauge with extension plate offers wider crosscut support Blade guard and riving knife have quick release for tool-less mounting and removal Precision ground cast iron table and wings have beveled edge for smooth miter gauge entry Built-in extraction port increases dust collection efficiency Heavy cast iron trunnion ensures smooth blade positioning Chrome trimmed handwheels are ergonomically designed Accu-Fence locks to rail without play (Blade not included) 5 Year Warranty

Pages: first pageprev page1 2 3 4 5 6 7 8 9 10next pagelast page