Pages: first pageprev page5 6 7 8 9 10 11 12 13 14next pagelast page

Dewalt DC742VA Heavy-Duty Compact 3/8' 10mm 12V Cordless Drill/Driver Kit with vehicle charger

Dewalt DC742VA Heavy-Duty Compact 3/8' 10mm 12V Cordless Drill/Driver Kit with vehicle charger
$199.99

Heavy-Duty Compact 3/8' (10mm) 12V Cordless Drill/Driver Kit with vehicle charger3 Year Limited WarrantyIncludes:1 hour vehicle charger(2) 12V batteriesscrewdriver bitheavy-duty kit boxFeatures & Benefits:Compact size: allows users to fit into tight spacesLightweight design (3.8 lbs.) minimizes user fatigue3/8" single sleeve ratcheting chuck reduces bit slippageDual speed range 0-400/0-1,450 rpm delivers optimal performanceHigh performance frameless motor delivers maximum power of 200 unit watts outLED work light provides increased visibility in confined spaces

16'' Longworth Style Chuck

16'' Longworth Style Chuck
$199.99

Just rotate the plates of the Longworth Style Chuck and the soft silicone buttons close in almost instantly, and with perfect concentricity, to hold your project while you make the finishing cuts to the bottom side. Unlike many other rechucking methods, the silicone buttons won't mar your project or your finish. When compressed with the wing nuts, they expand to provide a secure grip. The 1/4" thick phenolic plates provide strength and stability, regardless of humidity. Available in two sizes: the 10" Longworth Style Chuck for mini and midi lathes with a 10" swing, and the 16" Longworth Style Chuck for standard-sized lathes with a 16" swing or larger. Pick up a piece of fine china, and the first thing you'll do after admiring the faceis turn it over to inspect the bottom and insignia. It's no different with turnedbowls, and turners work hard to make the bottom as beautiful as the top. Butchucking a finished bowl face down on the lathe without damaging it hasalways been a challenge - not with the Longworth Style Chuck. Simply rotatethe plates, tighten down the buttons, and you're ready to turn.Eliminates the time and inconvenience of installing, adjusting and readjustingordinary rechucking jaws.Capable of holding projects in compression or expansion mode (from theinside or outside of the rim of your turning project).Buttons close in concentrically, making it easy to center your project.Soft silicone buttons have increased length for better grip and expansioncapabilities.Buttons expand when the wing nut is tightened, and will not mark or deformyour turned piece.Includes 8 buttons. Replacement packs of buttons with hardware are availableseparately (47455).No assembly required.1/4" phenolic discs are extremely durable, stable, and spin in opposingdirections with almost no resistance.The back side of the Longworth Style Chuck has a steel disk approximately 3/8"thick for mounting.The disk is easily gripped by any brand of 4-jaw scroll chuck with the standard50mm #2 jaws.Straight jaws may be used, but dovetail jaws provide a better hold.The dovetail groove accommodates Nova chucks and Vicmarc chucks as well asOneWay type straight jaws.Recommended maximum RPM is 600.Intended for light finishing cuts only. Note for heavy stock removal. Note: Best practice for safety dictates that you engage the tailstock wheneverpossible. Remove the tailstock only when finishing the last bit in the very center,and for finish sanding.Specifications:Capacity in compression mode: 4-1/2" to 14" in diameter.Capacity in expansion mode: 5-3/4" to 15-1/2" in diameter.

General Tools Pin-Style Wood Moisture Meter

General Tools Pin-Style Wood Moisture Meter
$199.99

This pin-type moisture meter from General Tools can measure the moisture content of up to 48 different species of wood with an accuracy of 0.1%. With a quick, simple check before machining, you can ensure straight, flat assemblies with no splitting due to premature use. The moisture meter features a large, easy-to-read display with OLED technology for extra clarity outdoors. It stores up to 99 readings in its memory, and even measures air temperature and humidity for reference. Also includes a calibration reference block and a 9V battery.Select and measure moisture content of 48 types of timber/wood.Large, easy-to-read 1.54'' yellow OLED dot matrix display (128 x 64 dot).Yellow OLED provides extra clarity in outdoor lighting conditions.Moisture content range of 7-30% (automatically temperature compensated) and 30.1-100% (non-temperature compensated).Resolution of 0.10%.Also measures ambient temperature and humidity for background references.Auto power off to conserve battery life.Low battery indicator.Stores up to 99 readings for min, max and average moisture content.Pin type measurement.Uses industry-leading methodology and calibration curve.Includes single-point calibration check block.

One of a Kind Beech Slab - 66'' L x 15'' W x 2'' Thickness

One of a Kind Beech Slab - 66'' L x 15'' W x 2'' Thickness
$199.99

Each of these unique slabs is individually cut to reveal the most interesting grain and to preserve as much of the natural live edge as possible - use them for table tops, clock faces, signs, decorative wall hangings and whatever else your imagination can drum up. Live edge slabs reveal the individual character of the tree from which they were cut, and provide woodworkers with beautiful wide boards that would otherwise be ripped thin if milled for yield. Because of their width, most of these slabs won't fit through a jointer or planer. Instead, they are carefully flattened on a custom-built, manually-operated mill. The slabs are then sanded to 150-grit and given a light of coat of clear shellac for protection. All of these slabs are sourced from small family-owned mills that practice responsible land management. For dimensions refer to the grid in the photo: each red square represents 12''; each black square represents 4'' When necessary, checking and defects are carefully patched at the mill Sanded to 150-grit and coated with shellac for protection

One of a Kind Myrtle Slab - 26'' L x 11'' W x 2'' Thickness

One of a Kind Myrtle Slab - 26'' L x 11'' W x 2'' Thickness
$199.99

Each of these unique slabs is individually cut to reveal the most interesting grain and to preserve as much of the natural live edge as possible - use them for table tops, clock faces, signs, decorative wall hangings and whatever else your imagination can drum up. Live edge slabs reveal the individual character of the tree from which they were cut, and provide woodworkers with beautiful wide boards that would otherwise be ripped thin if milled for yield. Because of their width, most of these slabs won't fit through a jointer or planer. Instead, they are carefully flattened on a custom-built, manually-operated mill. The slabs are then sanded to 150-grit and given a light of coat of clear shellac for protection. All of these slabs are sourced from small family-owned mills that practice responsible land management. For dimensions refer to the grid in the photo: each red square represents 12''; each black square represents 4'' When necessary, checking and defects are carefully patched at the mill Sanded to 150-grit and coated with shellac for protection

DeWalt DWP611PK Compact Router

DeWalt DWP611PK Compact Router
$199.99

A light, ergonomic compact router with variable speed control, plus a full-featured plunge base-the ultimate handheld powerhouse! Smooth-sliding plunge base has rubber handles, a five-step turret stop, and sliding depth-rod with micro-rod for fine adjustments. LED lighting in base with clear sub-bases for optimum visibility. Powerful 1-1/4 hp motor is perfect for trimming laminate, cutting flutes, edge profiling and even mortising. All-metal motor can is designed for durability, and motor features soft-start and electronic speed control to maintain speed under load. Intuitive depth adjustment ring, quick-release tabs and adjustable clamp make adjustments a snap. 1/4" collet is extra-long for better contact with the bit, and the spindle lock features a large button and 12 detentes for easy bit changes.

SawStop Professional Table Saw Mobile Base

SawStop Professional Table Saw Mobile Base
$199.00

This mobile base makes moving the rugged Sawstop PCS Professional Cabinet Saws (e.g. 42008, sold separately) an absolute breeze, and does so without compromising any of the stability and rigidity so desired in cabinet saws of that caliber. In fact, it's built so tough that it requires no additional support for saws with the longer 52" fence. Give the foot pedal three quick pumps, and the saw is lifted onto four sturdy, rotating casters. A light press on the release lowers the saw so that it rests firmly on the ground, not the casters, ensuring excellent stability while sawing.NOTE: No International shipping available on SawStop items. SawStop items can only be shipped within the Continental United States. SawStop, the SawStop blade logo, and the configurations of SawStop products are either registered trademarks or trademarks of SawStop, LLC and are used with permission.Technical Details:Compatible with the Sawstop PCS Professional Cabinet Saws (sold separately).Mobile base supports both saw and extension table-no need for separate framework for the 52" extension table.1000-pound weight capacity.Two swiveling casters and two fixed casters provide mobility in any direction.After lowering, the saw rests directly on your shop floor, not on the casters, so its weight is transferred directly to the floor.To raise the saw, pump the foot pedal three times.To lower the saw, lightly trip the release.Constructed from fully welded solid 1/4" steel with a black powder coat finish.High performance full ball bearing casters.

Four Irwin Parallel Clamps w/Clamp Rack

Four Irwin Parallel Clamps w/Clamp Rack
$191.95

Irwin Parallel Clamps:With jaws that stay perfectly parallel, these clamps are ideal for accurate clamping of casework and drawers. The unique handle doubles as a clutch - just pull up to disengage. Clutch prevents clamp head from sliding down and pinching your fingers while on the clamp rack. The bar has no serrations, so the jaws slide smoothly and dried glue flakes off easily. Non-marring jaws are a full 2'' in width to spread clamping pressure over a greater surface area. Extra long screw thread gives a long clamping reach. Removable foot allows you to reverse the head for use as a spreader. 3-3/4'' throat depth.Parallel Clamp Rack:Organize your bulky parallel clamps once and for all. This specially designed rack holds all brands of parallel clamps - up to 12 in all - for easy and convenient storage. Pre-drilled holes are 16'' on center for simple mounting to wall studs. Store parallel clamps up to 50'' in length. Durable galvanized steel construction. 24'' inches long.

Nova Swing-Away Lathe Attachment

Nova Swing-Away Lathe Attachment
$190.99

Get easy, unobstructed access to the headstock in only seconds with the Nova Swing-Away Lathe Attachment. This beefy cast iron hinge allows you to swing away your heavy tailstock along with your bed extension so you have full access to the headstock when turning bowls or hollowing out deep forms. The attachment fits the Nova 1624 and the Nova DVR XP lathes and Bed Extensions (48465, 45311 and 48218, all sold separately). Attach an extra bed extension accessory to your Nova lathe (1624 or DVR XP) for longer projects, then use the Swing Away accessory to move the extra bed piece out of the way when it is not in use.No need to keep mounting and removing your extra bed extension and/or tailstock.Saves you space without having to remove the extra bed length.Simply move the tailstock to the end of the lathe bed, then swing the bed and tailstock away to allow full access to the headstock.The perfect accessory for bowl turners, who often struggle with tailstocks.Solid cast iron.CAD designed and tested for optimum strength.Pieces are cast from a high grade cast iron with solid section thickness, designed to withstand extremely high stresses with practically no distortion.Weight: 4.61kgs/10.16lbs.For NOVA 1624 and DVR XP lathes only (48465 and 45311, sold separately).203mm/7.99" radius.180┬░ of swing.

Cabinet 0042 For Sjobergs Workbenches

Cabinet 0042 For Sjobergs Workbenches
$190.00

This cabinet is designed to fit into the base of your Sjobergs Nordic Plus 1450 Workbench (56000, sold separately) or the Sjobergs Hobby Plus 1340 benches (58508 and 56530, sold separately). The cabinet helps keep your tools organized and free of dust and shavings, while also adding mass to your workbench to dampen vibration and reduce shifting. Made from birch and birch plywood. Sturdy box joints at all drawer cornersDrawers slide smoothly on wooden runnersSliding doors provide easy access to tools and can be left open without obstructing your movementEasy assembly; instructions included

Grex P635 1-3/8'' Headless Pin Nailer

Grex P635 1-3/8'' Headless Pin Nailer
$189.99

Voted "Best New Tool" in Popular Woodworking and "Best Bet" in Woodworker's Journal, this innovative pin nailer makes the perfect helpmate for finish and trim work. The patented magazine eliminates the need to adjust for different fastener lengths - just drop in your pins and you're ready to nail. Shoots headless pins for the smallest possible entry hole. Accepts fasteners up to 1-3/8" long.Ideal for light wood assembly, Finish and trim work, Molding and decorative trim, Dowel and joint pinning, Mirror and picture frame assembly, Lightweight paneling, External softwood trim, Rattan furniture, Glazing strips, Craft work, Window beading, Display and sign work.Features:Penetrates fasteners through the hardest materials.Compact and lightweight design for improved maneuverability.Shoots fasteners up to 1-3/8" in length easily, even in hardwoods.Patented design eliminates need to adjust for different fastener lengths.Double trigger safety prevents accidental firing of tool.Side loading with mechanism to prevent fasteners from tumbling.Narrow nose reaches tight areas and corners for detailed trim work.Removable nose cover provides easy access for clearing jams.Removable no-mar tip prevents marring of work surface.Rear exhaust with built-in silencer to reduce exhaust sound.Fastener indicator to see when reloading is necessary.Convenient belt hook for easy carrying of tool.Quick access magazine storage for wrench and no-mar rubber tip.Specifications:Dimensions: 7.75"L x 7.5"H x 2"W (20cm x 19cm x 5cm)Weight: 2.21 lbs. (1 kgs.)Operating Pressure: 60 ~ 100 psi (4 ~ 7 bars)Fastener Type: 23 Gauge Headless PinsFastener Range: 3/8" ~ 1-3/8" (10mm ~ 35mm)Fastener Capacity: 1 strip (approx. 100 pins)Air Inlet: 1/4" (6mm) NPT male plugNOTE:23 gauge headless pins sold separately. Use in Grex Models P630, P635, P645 and P650.Caution: Loading fasteners incorrectly will damage your equipment!

Porter Cable 450PK Compact Router Combo with Fixed and Plunge Bases

Porter Cable 450PK Compact Router Combo with Fixed and Plunge Bases
$189.99

A full-featured plunge base paired with a light, ergonomic compact router-the contractor's dream! Smooth-sliding plunge base has rubber handles, a five-step turret stop, and sliding depth-rod with micro-rod for fine adjustments. Powerful 1-1/4 hp motor is perfect for trimming laminate, cutting flutes, edge profiling and even mortising. All-metal motor can is designed for durability, and motor features soft-start and electronic speed control to maintain speed under load. Intuitive depth adjustment ring, quick-release tabs and adjustable clamp make adjustments a snap. 1/4" collet is extra-long for better contact with the bit, and the spindle lock features a large button and 12 detentes for easy bit changes. Clear sub-bases for optimum visibility.Technical Details:Ergonomically Designed to Allow for Comfortable & Assured, Single Handed ControlDurable 1-1/4 HP Motor Delivers the Power to Meet the Toughest ApplicationsSoft-Starting Motor Features Full-Time Electronic Feedback That Maintains Motor Speed Through the CutMotor can be transitioned quickly and easily between fixed and plunge basesDepth Ring & Clamping Mechanism Combine to Ensure Motor Remains Locked in PositionAdjustment Ring Enables Controlled Bit Depth Changes to within 1/64"Large, Low-Pressure Spindle Lock Button Allows for Comfortable, Single Wrench Bit ChangesMultiple shaft-lock detents enable quick and simple bit changes5-position adjustable turret enables stepped or repeated plunge cutsAluminum Motor Housing & Base Construction Provides Long Term DurabilityLarge 4" Diameter Sub-Base Accepts Universal Template GuidesPlunge base incorporates fine-tune adjustment rod for precise depth settingUp to 1.5" of depth travel with standard base and 2" with plunge baseExtended 8-Slot 1/4" Collet Maximizes Surface Contact with Router Bit Shank for a Tighter GripFixed & Plunge Base Combo Kit; Large Plunge Base Platform Provides Added Stability for Heavier Applications & Sub-Base Accepts Universal Template Guides

Robert Sorby Sovereign Ultima Hollowing Tool

Robert Sorby Sovereign Ultima Hollowing Tool
$186.99

The ultimate hollowing tool that lets you produce a variety of hollow forms quickly and efficiently! Articulating link lets you undercut the rims of projects and produce any hollow shape possibleSlices rather than scrapes for a fast, smooth cut Blade can be turned for long cutting life and is easily resharpened Multiple adjustments give you just the cut you needPart of the Robert Sorby Sovereign Ultima modular system that is used with the Interchangeable Handle (sold separately)Small tool enables woodturners to produce hollow forms up to 11" (275 mm) Made from high-grade HSS Only one third of the cutter is exposed at one time, allowing you to rotate the blade twice through 120┬░ before it needs to be sharpened Designed for both wet and dry woods An articulating link which enables the turner to undercut the rims of projects and produce a variety of hollow form shapes from traditional vase to squashed form Shaft can be extended with additional links (sold separately) Cleverly designed shaving clearance which prevents clogging in normal use A high-performance cutter system which slices through wood rather than scrapes Adjustable cutter depth for heavy or light cuts with fine micro adjustment for extra finesse Removable cutter can be easily replaced or sharpened with diamond hone100% manufactured in the UK

Hafele Venice Warm LED Lights-Warm LED Lights

Hafele Venice Warm LED Lights-Warm LED Lights
$184.99

Bring high intensity lighting to vertical or horizontal applications inside cabinets andother storage spaces. The unique design of these fixtures allows recessed installationand reflects warm 3200K light back inside the cabinet to provide optimal illuminationof the space. A built-in diffuser reduces glare to make lighting easy on your eyes.Depending on length, Venice fixtures range from 2.4 to 5.8 watts. Requires Connector Lead (33127, 39613, or 30515) and Transformer(35189 or 36750), sold separately. Allow 2 weeks for delivery.Warm LED Light with Touch Control option also available.

Logan 350-1 Compact Elite Mat Cutter

Logan 350-1 Compact Elite Mat Cutter
$179.99

With just four swipes of its razor-sharp cutting head, the Logan 350-1 Compact Elite Mat Cutter creates a crisply beveled mat to complete your latest framing project. And despite its name and compact size, it can create large-scale mats up to 32" long! The mat cutter includes two cutting heads: a straight head with adjustable depth for storage, standard thickness mat board, and 3/16" foam board; and a beveled head for standard thickness mat board. The cutter heads hook onto the guide rail, and glide easily along with minimal friction, and zero play. Features a system of stops and scales for precision and easy repeatability. Includes a DVD with full instructions for use. Push-style beveled cutting head features start and stop indicators for precise results.Nylon guides allow you to hook cutters onto the side of the guide rail.32" cutting capacity.Hinged guardrail for easy removal of mats.Adjustable guide for border widths from 3/4" to 4-1/4".Push-style bevel cutter hooks onto edge of guide rail for precise cutting.Adjustable depth pivoting straight cutter can cut standard thickness mat board and 3/16" foam board.Removable 20" measuring bar for straight cutting.Squaring bar and two guide rail stops ensure precise right angles.Bevel head works with standard thickness mat board only (1.4-mm thick). Includes 1 cutting board, mat guide stop, guiderail stop, straight cutting measuring bar and stop, bevel cutter, heavy duty straight cutter, instructional DVD, and five blades.

Half-Moon 2 Shelf Blind Corner Lazy Susans, Rev-a-Shelf 6882 Series-39" Diameter

Half-Moon 2 Shelf Blind Corner Lazy Susans, Rev-a-Shelf 6882 Series-39" Diameter
$179.99

Every blind corner base cabinet can become functional with Rev-A-Shelf's Half Moon Shelf System. The Half Moon Series includes standard and 90-degree hinge euro brackets and chrome-plated shaft and mounting brackets to help distribute the weight from the cabinet wall to the floor of the cabinet. In addition, the color coated shelf supports match the shelf and provide maximum deflection support.Includes 2 Polymer Shelves as well as pivot and slide hardwareDesigned for a blind corner cabinet applicationsAvailable in either white or almond finishLimited Lifetime WarrantyDETAILS PER SKU:1002114Dimensions: 39"W x 19.25"H x 19.5"DDiameter: 39"Each Unit Contains: (2) shelf supports (6820-07-**); (2) each positioning base (6820-95-2); (1) standard bracket (6882-68-2); (1) Euro bracket (6880-68-2); (1) 15.875" (403 mm) shaft assembly (6882-96-1700-26); (2) pair of slides (6880-95-1008)BHMA Certified1002079Dimensions: 39"W x 19.25"H x 19.5"DDiameter: 39"Each Unit Contains: (2) shelf supports (6820-07-**); (2) each positioning base (6820-95-2); (1) standard bracket (6882-68-2); (1) Euro bracket (6880-68-2); (1) 15.875" (403 mm) shaft assembly (6882-96-1700-26); (2) pair of slides (6880-95-1008)BHMA Certified

Freud 91-108 9-Pc. Basic Router Bit Set - 1/2" Shank

Freud 91-108 9-Pc. Basic Router Bit Set - 1/2" Shank
$176.47

Make your joinery and edge profiles look equally sharp with this 9-Piece Basic Router Bit Set from Freud. With a dovetail bit, three straight bits and a rabbeting bit, you'll have the capability of cutting a full suite of high-quality joints. Use the flush trim bit to trim any veneers, laminates or thin stock glue joints before sanding. Once your project is together, the ogee, round over and V-groove bits will help you dress it up for beautiful final results. The set includes a beautiful wall-mountable wooden case with a hinged door that keeps your bits protected and well-organized.Includes a variety of bits for joinery and decorative effects.Set comes in Freud's unique shadow box case, which hangs on the wall or mounts on the bench to keep bits handy and safe.Cuts all composition materials, plywoods, hardwoods, and softwoods.Use on hand-held and table-mounted portable routers.Features TiCo Hi-Density carbide for longer bit life and a flawless finish.Perma-SHIELD Non-stick Coating protects from heat, gumming, and corrosion.Each bit is computer-balanced and precision-ground for the smoothest possible cuts.1/2" Double Flute Straight Bit:Freud #: 12-116Overall Diameter (A): 1/2"Carbide Height (B): 1"Shank (C): 1/2"Overall Height: 2-5/8"3/8" Double Flute Straight Bit:Freud #: 12-108Overall Diameter (A): 3/8"Carbide Height (B): 1"Shank (C): 1/2"Overall Height: 2-5/8"1/2" Mortising Bit:Freud #: 16-110Overall Diameter (A): 1/2"Carbide Height (B): 1/2"Shank (C): 1/2"Overall Height: 2-3/8"1/2" Dovetail Bit:Freud #: 22-112Overall Diameter (A): 1/2"Carbide Height (B): 1/2"Shank (C): 1/2"Overall Height: 2-1/4"Rabbeting Bit:Freud #: 32-102Overall Diameter (A): 1-1/4"Bearing Diameter: 1/2"Carbide Height (B): 1/2"Shank (C): 1/2"Overall Height: 2-1/4"Rounding Over Bit:Freud #: 34-120Overall Diameter (A): 1"Bearing Diameter: 1/2"Carbide Height (B): 1/2"Shank (C): 1/2"Overall Height: 2-1/2"Roman Ogee Bit:Freud #: 38-106Overall Diameter (A): 1-3/8"Bearing Diameter: 3/8"Carbide Height (B): 1/2"Shank (C): 1/2"Overall Height: 2-3/8"Bearing Flush Trim Bit:Freud #: 42-109Overall Diameter (A): 1/2"Bearing Diameter: 1/2"Carbide Height (B): 1/2"Shank (C): 1/2"Overall Height: 2-7/8"V" Grooving Bit:Freud #: 20-108Overall Diameter (A): 3/4"Carbide Height (B): 1/2"Shank (C): 1/2"Overall Height: 2-1/4"

Irwin 4 Piece Parallel Clamp Set

Irwin 4 Piece Parallel Clamp Set
$175.96

With jaws that stay perfectly parallel, these clamps are ideal for accurate clamping of casework and drawers. The unique handle doubles as a clutch - just pull up to disengage. Clutch prevents clamp head from sliding down and pinching your fingers while on the clamp rack. The bar has no serrations, so the jaws slide smoothly and dried glue flakes off easily. Non-marring jaws are a full 2" in width to spread clamping pressure over a greater surface area. Extra long screw thread gives a long clamping reach. Removable foot allows you to reverse the head for use as a spreader. 3-3/4" throat depth.

Pages: first pageprev page5 6 7 8 9 10 11 12 13 14next pagelast page