Pages: first pageprev page1 2 3 4 5 6 7 8 9 10next pagelast page

Robert Sorby Handled TurnMaster Turning Tools-TurnMaster

Robert Sorby Handled TurnMaster Turning Tools-TurnMaster
$108.99

The Robert Sorby TurnMaster is a premium quality modular turning tool that accepts a variety of interchangeable cutters, allowing you to use a single tool for a wide variety of turning projects. The TurnMaster's solid 3/4" steel shank is flattened on the bottom for stability, and the patented TurnMaster head can be rotated to three indexed positions: centered for shaping, and left and right shear for finishing. TurnMaster turning tools are sold with your choice of round, square or detail point cutters in carbide, or a pack of all three in high speed steel. Additional cutters are available in a range of profiles, and in three materials for incredible versatility. For more on the cutter materials, click the "More Info" tab. Each tool ships with Robert Sorby's trademark ash handle installed with a brass collar. If you wish to turn your own handle, TurnMaster Shanks are available separately (e.g. 45649).Technical Details:Patented three-position indexable head can be quickly and easily changed by loosening the locking collar with the included wrench.Head is designed so that all TurnMaster cutters will fit one tool.Additional heads can also be purchased (48797, sold separately) if the user wishes to have a dedicated head for certain cutters.Three indexed positions allow you to go from shaping (centered) to finishing (left or right shear) with a simple turn of the head.Cutters are held in place with a high tensile torx screw which canbe easily removed to change the cutter.Which cutter material should I use?Cutters are available in Tungsten Carbide, High Speed Steel (HSS) and HSS coated with Titanium Nitride ("Excelsior").Tungsten Carbide:Designed to be disposable, these carbide cutters don't require any sharpening. (Carbide tips can actually be sharpened, but require specialized diamond abrasives).Carbide stays reasonably sharp for a longer period of time, but because of its coarse grain, can never be sharpened as finely as HSS.Gives extended cutting life with the toughest of woods.Sharpens to 0.7 - 1 microns.Hardness: 90 RC.Material: micro grade tungsten carbide.High Speed Steel (HSS):Due to its finer grain structure, HSS holds a sharper edge than carbide, but will dull more quickly.Very economical - can be re-sharpened multiple times with standard sharpening equipment.Provides unmatched quality for the discerning woodturner keen on getting the greatest detail from their tools.Sharpens to 0.2 - 0.4 microns.Hardness : 62 RC.Material: M2 HSS.Titanium Nitride (Excelsior):These cutters provide the same advantages as HSS but give added longevity before sharpening is required.No specialized equipment is required for sharpening.Repeated sharpening does not remove the titanium nitride coating, it simply renews it.Sharpens to 0.15 - 0.2 microns.Hardness of titanium coating is up to 85 RC.Material: Titanium nitride coated M2 HSS.How to use the TurnMaster:Set the head in a neutral position so that the cutter is horizontal when the tool is held flat on the lathe tool rest.This is done by loosening the locking collar with the unique wrench and rotating the collar a minimum of two and half turns, which will allow the head to be turned to the required position.Once it is set into the correct position re-tighten the locking collar with the wrench to secure the head into place.To assist with the tightening of the collar, the included small Tommy bar can be placed in the hole situated in the shank to give additional purchase, but please do not over tighten.The tool is now in standard scraping mode.There are three positive stop positions to lock the head for standard scraping, shear scraping to the left and shear scraping to the right.To remove the waste material and to create an initial shape, use either the square or round cutter depending on the shape of the project being turned.Once the required shape has been created, turn the head of the tool to the left or right following the instructions as above.Now the TurnMaster is in shear scraping mode and a more refined shape and finish can be achieved.To ensure the best available finish, always cut with the grain using a freshly sharpened HSS cutter. This will ensure that the grain is sliced to produce a clean surface finish.

4-Jaw Turning Chuck

4-Jaw Turning Chuck
$106.99

Independently adjustable jaws allow you to lock in square or odd-shaped stock on your lathe. Stepped jaws can also be reversed for added versatility.Technical Details:Stepped jaws can also be reversed for added versatility.Internal measurements: 5-1/4" max., 3/8" min.6" dia. chuck includes key.1" x 8 TPI insert and 3/4" x 16 TPI insert sold separately.Independently adjustable jaws allow you to lock in square or odd-shaped stock. Stepped jaws can also be reversed for added versatility.

Mini Jumbo Jaws for Oneway Scroll Chuck System

Mini Jumbo Jaws for Oneway Scroll Chuck System
$102.99

Because of their 8-1/2" diameter, these Mini Jumbo Jaws for the Oneway Scroll Chuck (22719, sold separately) and Talon Chuck (20761, sold separately) work on smaller lathes. With the rubber grippers and the combination of slots and tapped holes machined in the solid aluminum plates, the Mini Jumbo Jaws can hold an infinite number of round, oval or square shapes. Grippers are made of hard rubber pressed over a tapered steel sleeve for superior holding.Chucking capacities of the Oneway Scroll Chuck with Mini Jumbo Jaws:External (compression): 2" minimum, 8-1/8" maximumInternal (expansion): 4" minimum, 10-1/8" maximum

Steel Table Frame, 12''W x 46''L x 28-1/2''H

Steel Table Frame, 12''W x 46''L x 28-1/2''H
$99.99

These steel table frames are useful in the shop as machine stands, work tables and assembly tables. The attractive finish and brushed nickel hardware mean that you get to choose-just add a top to suit the application. All can be outfitted with optional casters for easy mobility. With it's tall, narrow profile, this table can be tucked against the wall for added work space or storage in small shops, and also makes a great tool stand for your lathe, benchtop drill press, or mortising machine. Durable solid steel construction-use for shop stands or living room furniturePaintable gun metal powder-coated finishHigh-quality brushed nickel hardwareEasy to assemble (includes instructions)Includes padded feet to protect your floorLegs accept casters with a 1/2'' stem (not included) if mobility or additional height are desiredNote: Not compatible with our Shop Stand Riser Blocks

Robert Sorby TurnMaster Shanks

Robert Sorby TurnMaster Shanks
$99.99

The Robert Sorby TurnMaster is a premium quality modular turning tool that accepts a variety of interchangeable cutters, allowing you to use a single tool for a wide variety of turning projects. This is the shank only version, which can be used either with a Sovereign Handle (e.g. 48597, sold separately), or with a custom-turned handle of your own design. The TurnMaster shank is made from solid 3/4" steel, and is flattened on the bottom for stability, while the patented TurnMaster head can be rotated to three indexed positions. Use the center position for shaping, and the left and right shear positions for finishing. TurnMaster turning tools are sold with your choice of round, square or detail point cutters in carbide, or a pack of all three in high speed steel. Additional cutters are available in a range of profiles, and in three materials for incredible versatility. For more on the cutter materials, click the "More Info" tab. TurnMaster tools are also available with ash handles pre-installed (e.g. 44447, sold separately).Technical Details:Use with your choice of Sovereign Handle (e.g. 48597, sold separately), or with a custom-turned handle of your own design.If you choose to use the Sovereign Handle, you'll also need the 1/2" Collet (47155, sold separately) to reduce the handle opening.Patented three-position indexable head can be quickly and easily changed by loosening the locking collar with the included wrench.Head is designed so that all TurnMaster cutters will fit one tool.Additional heads can also be purchased (48797, sold separately) if the user wishes to have a dedicated head for certain cutters.Three indexed positions allow you to go from shaping (centered) to finishing (left or right shear) with a simple turn of the head.Cutters are held in place with a high tensile torx screw which canbe easily removed to change the cutter.Which cutter material should I use?Cutters are available in Tungsten Carbide, High Speed Steel (HSS) and HSS coated with Titanium Nitride ("Excelsior").Tungsten Carbide:Designed to be disposable, these carbide cutters don't require any sharpening. (Carbide tips can actually be sharpened, but require specialized diamond abrasives).Carbide stays reasonably sharp for a longer period of time, but because of its coarse grain, can never be sharpened as finely as HSS.Gives extended cutting life with the toughest of woods.Sharpens to 0.7 - 1 microns.Hardness: 90 RC.Material: micro grade tungsten carbide.High Speed Steel (HSS):Due to its finer grain structure, HSS holds a sharper edge than carbide, but will dull more quickly.Very economical - can be re-sharpened multiple times with standard sharpening equipment.Provides unmatched quality for the discerning woodturner keen on getting the greatest detail from their tools.Sharpens to 0.2 - 0.4 microns.Hardness : 62 RC.Material: M2 HSS.Titanium Nitride (Excelsior):These cutters provide the same advantages as HSS but give added longevity before sharpening is required.No specialized equipment is required for sharpening.Repeated sharpening does not remove the titanium nitride coating, it simply renews it.Sharpens to 0.15 - 0.2 microns. Hardness of titanium coating is up to 85 RC.Material: Titanium nitride coated M2 HSS.How to use the TurnMaster:Set the head in a neutral position so that the cutter is horizontal when the tool is held flat on the lathe tool rest.This is done by loosening the locking collar with the unique wrench and rotating the collar a minimum of two and half turns, which will allow the head to be turned to the required position.Once it is set into the correct position re-tighten the locking collar with the wrench to secure the head into place.To assist with the tightening of the collar, the included small Tommy bar can be placed in the hole situated in the shank to give additional purchase, but please do not over tighten.The tool is now in standard scraping mode.There are three positive stop positions to lock the head for standard scraping, shear scraping to the left and shear scraping to the right.To remove the waste material and to create an initial shape, use either the square or round cutter depending on the shape of the project being turned.Once the required shape has been created, turn the head of the tool to the left or right following the instructions as above.Now the TurnMaster is in shear scraping mode and a more refined shape and finish can be achieved.To ensure the best available finish, always cut with the grain using a freshly sharpened HSS cutter. This will ensure that the grain is sliced to produce a clean surface finish.

Nova Cole Jaw Set

Nova Cole Jaw Set
$93.99

The Nova Standard Cole Jaws are designed for re-chucking bowls with the bottom side exposed in order to remove chuck marks, add decoration or to re-shape the bottom of the bowl. They are suitable for lathes with a minimum 12"/300mm swing diameter. Other Nova jaw sets (sold separately) can be fitted to the Cole Jaws for a variety of mounting options, and custom wooden jaws can also be created for unique situations. The optional 6030 Jaw Buffer Kit (43974, sold separately) also greatly extends the workholding potential of the Cole Jaws. See the Mini Cole Jaws (45274, sold separately) for lathes with a minimum 8Designed for lathes with a minimum 12"/300mm swing diameter. Designed for lathes with a minimum 12"/300mm swing diameter.Max workpiece diameter with Precision Midi chuck: 8.661" (external grip); 11" (internal grip).Max workpiece diameter with Nova G3 chuck: 9.291" (external grip); 11" (internal grip).Max workpiece diameter with Supernova 2 chuck: 9.291" (external grip); 11" (internal grip).Max workpiece diameter with Titan chuck: 9.449" (external grip); 11" (internal grip).For replacement bumpers, see the Nova Cole Jaw Fastening Kit (44091, sold separately).A fast, easy way of re-chucking bowls to make the finishing cuts on the bottom side.Fits all Teknatool chucks.Holds a wide range of bowl sizes safely.Other jaws can be attached for more mounting versatility.Exceptional structural strength.Nova chucks give you the same jaw fixing system and same insert/adapter system across all chuck models.All accessory jaws in the range will fit all the chucks in the range for optimum flexibility. Some, however, are not recommended. See individual jaws for recommendations.Nova chucks are specially designed so the jaws cut into the wood, grip firmly in the contraction mode and provide high tear out strength.Usage Tips:While traditionally these type of jaws are used in the compression mode, depending on the bowl shape, the jaws can be used to grip in either the contracting or expanding mode.To ensure best grip, the bowl should have a positive or negative flair towards the edge of the bowl.Try to avoid straight-sided bowls where the grip will be less efficient.Best practice is to have a cutting action such that much of the chisel force is directed towards the headstock, not across the face.

Robert Sorby 3-Piece Pen Turning Set

Robert Sorby 3-Piece Pen Turning Set
$89.99

Create pens, lace bobbins, or other small decorative pieces with this all-in-one Pen Turning Set from Robert Sorby! Includes a 1/16" parting tool, 5/16" roughing gouge, 1/2" spindlemasterDesigned for use on a mini lathe or for work on smaller projectsEach tool has an overall length of 10"

Nova DVR Wireless Remote Retrofit Kit

Nova DVR Wireless Remote Retrofit Kit
$84.99

This Retrofit Kit allows you to use the Nova DVR Wireless Remote (45292, sold separately) with older DVR lathes, which don't have the required control panel. To determine if you need the Retrofit Kit, look on your lathe for the "Remote Enabled" sticker. Lathes with this sticker do NOT need the Retrofit Kit. Installation is easy with the included step-by-step instructions. Do I need the Retrofit Kit? Look for the ''Remote Enabled'' sticker on your Nova DVR Lathe. If you have this sticker, you won't need the Retro Fit Kit, as your Nova DVR is already equipped to receive remote signals. If this sticker is not on your lathe, you will need the Retro Fit Kit to enable your DVR to 'talk' to your wireless remote.For use with the Nova DVR Wireless Remote (45292, sold separately).Easy to Install.FCC and CE compliant.

Nova Live Center System With Stepped Cone

Nova Live Center System With Stepped Cone
$82.99

With over six functions in one handy unit, this unique live center system provides comprehensive tailstock support for virtually any spindle turning project. It boasts triple-bearing construction for excellent durability and incredibly smooth turning, even when higher speeds or clamping pressures are required. Precision machined from the highest quality materials. Fits all lathes with a standard #2 morse taper tailstock quill. Versatile - over 6 mounting options in one handy unit.Morse taper allows quick-change capability for fast setups.Durable, high-quality triple bearing system.Fits all lathes with standard #2 morse taper (2MT) tailstock quill.Includes unique stepped cone system as standard, allowing ultra fast and convenient mounting of work.Can handle both heavy and delicate work, and hard and soft woods.Hollow morse taper allows the user to drill through the live center—ideal for drilling cable routes for lamps and more.Instruction manual included.Mounting Options:Threaded Center: Features an internal thread for mounting either a bolt or a screw (hanger bolt). Enables the center to be used to mount wooden plugs, disks or mandrels to support bowl work or spindle work. With its internal cone form, this center can also be used for quick centerless mounting of square or round spindles up to 8mm wide. The threaded center is also needed to mount the stepped cone accessory.Miniature Extension Center: Designed to support thin work or small, delicate turnings.60 Degree Center: A good all-purpose center designed for a wide variety of applications. Ideal for medium to hard woods.Hollow Cup Center and Point: Comes with its own demountable center point. An ideal way to hold softwoods without the risk of splitting.Stepped Cone: The Stepped Cone is a quick, convenient way to mount centerless rounds up to 40mm (1-9/16'') in diameter, as well as split turning pieces, or other work without a center. Reverse mounting of cone allows wedge fit of hollowed work. Requires the threaded center to mount it on the live center.

Nova 75mm (3'') Long-Nosed Jaw Set

Nova 75mm (3'') Long-Nosed Jaw Set
$80.49

A generous 2" extension beyond the mounting base gives these unique long-nosed jaws a deep reach for tremendous holding power, both internally and externally. The external dovetail provides a secure grip when used in expansion mode with bowls, and the internal dovetail is ideal for use with footed bowls and other turnings. The jaws also feature an internal powergrip for holding spigoted workpieces.Tremendous holding power externally and internally — a very versatile jaw.Ideal for green wood turning.Internal dovetail for holding footed bowls and other footed workpieces.Internal powergrip for holding spigoted workpieces.Note: Although these jaws will fit any Nova chuck, they are not recommended for use with the Precision Midi chuck.Capacity range when used with Nova G3 chuck (45748, sold separately):Expansion mode: 2.126" to 2.874".Contraction mode (square stock): 1.142" to 1.969".Contraction mode (spigot): 1.575" to 2.362".Capacity range when used with Nova SuperNova 2 chuck (48906, sold separately):Expansion mode: 2.126" to 2.874".Contraction mode (square stock): 1.142" to 1.969".Contraction mode (spigot): 1.575" to 2.362".Capacity range when used with Nova Titan chuck (45040, sold separately):Expansion mode: 2.126" to 3.346".Contraction mode (square stock): 1.142" to 2.402".Contraction mode (spigot): 1.575" to 2.835".Features standard on all Nova Jaws:Nova chucks give you the same jaw fixing system and same insert/adapter system across all chuck models. All accessory jaws in the range will fit all the chucks in the range for optimum flexibility. Some, however, are not recommended. See individual jaws for recommendations.Nova chucks are specially designed so the jaws cut into the wood, grip firmly in the contraction mode and provide high tear out strength.

Bed Extension for Excelsior Mini Lathe MC-1018

Bed Extension for Excelsior Mini Lathe MC-1018
$75.59

Increase the maximum length of spindle you can turn with your Excelsior Mini Lathe (33207, sold separately) by more than double with this cast-iron Bed Extension. It attaches quickly and easily to the Excelsior Mini Lathe and increases the distance between centers from 17-3/4" to 38-1/2" “ providing you the capacity needed to turn table legs, baseball bats or other longer spindles. The extra weight adds to overall lathe stability, as well. Excelsior Mini Lathe MC-1018, Sold Separately (33207)

Nova Mini Cole Jaw Set

Nova Mini Cole Jaw Set
$73.99

The Nova Mini Cole Jaws are designed for re-chucking bowls with the bottom side exposed in order to remove chuck marks, add decoration or to re-shape the bottom of the bowl. Mini Cole Jaws are suitable for lathes with a minimum 8"/203mm swing diameter. Other Nova jaw sets (sold separately) can be fitted to the Mini Cole Jaws for a variety of mounting options, and custom wooden jaws can also be created for unique situations. The optional 6030 Jaw Buffer Kit (43974, sold separately) also greatly extends the workholding potential of the Mini Cole Jaws. See the Standard Cole Jaws (45174, sold separately) for lathes with a minimum 12"/300mm swing diameter. Designed for lathes with a minimum 8"/203mm swing diameter.Max workpiece diameter with Precision Midi chuck: 6.181" (external grip); 8.5" (internal grip).Max workpiece diameter with Nova G3 chuck: 6.693" (external grip); 8.5" (internal grip).Max workpiece diameter with Supernova 2 chuck: 6.693" (external grip); 8.5" (internal grip).Max workpiece diameter with Titan chuck: 7.087"(external grip); 8.5" (internal grip).For replacement bumpers, see the Nova Cole Jaw Fastening Kit (44091, sold separately).A fast, easy way of re-chucking bowls to make the finishing cuts on the bottom side.Fits all Teknatool chucks.Holds a wide range of bowl sizes safely.Other jaws can be attached for more mounting versatility.Exceptional structural strength.Nova chucks give you the same jaw fixing system and same insert/adapter system across all chuck models.All accessory jaws in the range will fit all the chucks in the range for optimum flexibility. Some, however, are not recommended. See individual jaws for recommendations.Nova chucks are specially designed so the jaws cut into the wood, grip firmly in the contraction mode and provide high tear out strength.Usage Tips:While traditionally these type of jaws are used in the compression mode, depending on the bowl shape, the jaws can be used to grip in either the contracting or expanding mode.To ensure best grip, the bowl should have a positive or negative flair towards the edge of the bowl.Try to avoid straight-sided bowls where the grip will be less efficient.Best practice is to have a cutting action such that much of the chisel force is directed towards the headstock, not across the face.

Nova 75mm (3'') Bowl Jaw Set

Nova 75mm (3'') Bowl Jaw Set
$72.99

This jaw set has great holding power for large bowls and moderately sized hollow forms. The dovetail walls are three times the thickness of conventional jaw types, which provide a much more secure grip for large or heavy turning blanks. The mounting screws go right through the wall section to add more support where it's needed most, while the deep, smooth-walled dovetails hold your wood gently but firmly. Triple thickness dovetail walls for rugged work-holding power.Screws go through the wall section to add holding power where it's needed most. Dovetail holds wood gently but firmly.Note: Although these jaws will fit any Nova chuck, they are not recommended for use with the Precision Midi chuck.Capacity range when used with Nova G3 chuck (45748, sold separately)Expansion mode: 3.189" to 4.016".Contraction mode (square stock): 1.339" to 2.165".Contraction mode (spigot): 1.831" to 2.657".Note: Caution recommended when using these jaws with the G3 chuck.Capacity range when used with Nova SuperNova 2 chuck (48906, sold separately):Expansion mode: 3.189" to 4.016".Contraction mode (square stock): 1.339" to 2.165".Contraction mode (spigot): 1.831" to 2.657".Capacity range when used with Nova Titan chuck (45040, sold separately): Expansion mode: 3.189" to 4.409".Contraction mode (square stock): 1.339" to 2.480".Contraction mode (spigot): 1.831" to 3.051.Features standard on all Nova Jaws:Nova chucks give you the same jaw fixing system and same insert/adaptor system across all chuck models.All accessory jaws in the range will fit all the chucks in the range for optimum flexibility. Some, however, are not recommended. See individual jaws for recommendations.Nova chucks are specially designed so the jaws cut into the wood, grip firmly in the contraction mode and provide high tear out strength

Nova Powergrip Jaw Set

Nova Powergrip Jaw Set
$70.49

Powergrip Jaws are the most powerful jaws for large spigot and hollow form turning in the Nova lineup. They grip both in contraction and expansion modes, and feature a dovetail that neatly fills the gap between the 75mm (3") and the 130mm (5") Jumbo Jaw sets. Precisely machined from a single solid piece of 1045 high tensile steel, they feature precise closing and excellent durability. Powergrip Jaws are compatible with the SuperNova 2, and come standard with all Titan chucks.Note: This is the Jaw Set only. Needs to be used with the Titan and Supernova chuck sold separatelyIdeal for large spigot and hollow form turning.Jaws grip both in contraction and expansion modes.Precisely machined from a single solid piece of 1045 high tensile steel.Compatible with the SuperNova 2 and Titan chucks only.Due to their size, Powergrip Jaws are not recommended for use with the G3 and Precision Midi chucks.Capacity range when used with Nova SuperNova 2 chuck (48906, sold separately):Expansion mode: 3.740" to 4.567".Contraction mode (square stock): 2.165" to 2.992".Contraction mode (spigot): 3.031" to 3.858".Capacity range when used with Nova Titan chuck (45040, sold separately):Expansion mode: 3.740" to 4.961".Contraction mode (square stock): 2.165" to 3.386".Contraction mode (spigot): 3.031" to 4.252".Features standard on all Nova Jaws:Nova chucks give you the same jaw fixing system and same insert/adapter system across all chuck models.All accessory jaws in the range will fit all the chucks in the range for optimum flexibility. Some, however, are not recommended. See individual jaws for recommendations.Nova chucks are specially designed so the jaws cut into the wood, grip firmly in the contraction mode and provide high tear out strength.

Robert Sorby Stebcentre with #2 Morse Taper

Robert Sorby Stebcentre with #2 Morse Taper
$69.99

Replace your traditional spur drive with the Revolutionary Robert Sorby Stebcentre Morse Taper! An essential addition to every turner's toolkit, it incorporates a spring loaded point in stainless steel and a set of razor sharp teeth that bite into the workpiece. Provides added security for the novice turner by allowing you to vary the degree of bite to the point where kick back of the turning chisel is eliminated. The Stebcentre may also be removed without the need to stop and re-start the lathe. Simply wind back the tail stock and the piece can be withdrawn safely.Size refers to drive face diameter. Comes in diameters of 1/2", 7/8", and 1-1/4". Made in England.Technical Details:Replaces traditional spur drivesIncorporates a spring loaded point in stainless steel and a set of razor sharp teeth that bite into the workpieceLets you vary the degree of bite to the point where kick back of the turning chisel is eliminatedMay be removed without the need to stop and re-start the latheSize refers to drive face diameterComes in diameters of 1/2", 7/8", and 1-1/4"Made in England

Universal Dust Collection Port

Universal Dust Collection Port
$69.99

It's the ultimate accessory for collecting dust from scroll saws, lathes, disc sanders and other woodworking machines. Bring your dust hose to where you need it! Mount this heavy-duty dust collection port almost anywhere - attach it to a floor base, clamp it to a table or mount it to a wall or ceiling.Features:Dust collection port has three 1-1/4" modular arm segments and one dust hood.Unique locking and pivoting mechanisms allow the arms to be locked in position at any angle and rotation.

Sorby Sandmaster

Sorby Sandmaster
$68.99

An extremely handy addition to any turner's armory, the Sandmaster is used in conjunction with a lathe to put a fine finish on turned pieces. It eliminates the unsightly lines often associated with traditional hand sanding.As the disc is spinning it also reduces the clogging of the abrasive. The Sandmaster comes complete with a hook-and-loop covered 2" sponge pad which allows for the easy changing of abrasive discs. A variety of grits - from 60 - 400 - of aluminum oxide disc can then be quickly attached.The adjustable head which runs on a durable phosphor bronze bushing lets the turner reach even the more inaccessible spots. As an optional extra, a 3" head and discs can be easily fitted for greater efficiency. The Sandmaster becomes an even more versatile tool when the head is removed and replaced by a pigtail mandrel and goblet or bowl mop. Made of fine grade cotton these mops are an ideal medium for buffing waxes and other finishes.Maintenance and use instructions for the Sandmaster.Technical Details:Overall Length: 11-1/2"Handle Length: 8-1/2"

Nova Pin Jaw Set

Nova Pin Jaw Set
$66.99

These special 25mm extended jaws are designed to act like a pin chuck, expanding into a pre-bored hole. This is an especially useful holding method for bowls with a free form edge. A big advantage over pin chucks is that you don't have to bore to an exact size - any size between the minimum and just under the maximum expansion will do. The longer jaw length allows for a very powerful spigot grip for smaller work like lace bobbins (up to 6" in length) and delicate pots. The jaws also have a dovetail for mounting small bowls (up to 6" in diameter). Capacity range when used with Nova Precision Midi chuck (47447, sold separately):Expansion mode: 1.024" to 1.378".Contraction mode (square stock): 0.276 " to 0.669".Contraction mode (spigot): 0.394" to 0.748".Capacity range when used with Nova G3 chuck (45748, sold separately):Expansion mode: 1.024" to 1.811".Contraction mode (square stock): 0.276 " to 1.102".Contraction mode (spigot): 0.394" to 1.220".Capacity range when used with Nova SuperNova 2 chuck (48906, sold separately):Expansion mode: 1.024" to 1.811".Contraction mode (square stock): 0.276 " to 1.102".Contraction mode (spigot): 0.394" to 1.220".Capacity range when used with Nova Titan chuck (45040, sold separately):Expansion mode: 1.024" to 2.244".Contraction mode (square stock): 0.276 " to 1.496".Contraction mode (spigot): 0.394" to 1.614".Features standard on all Nova Jaws:Nova chucks give you the same jaw fixing system and same insert/adapter system across all chuck models.All accessory jaws in the range will fit all the chucks in the range for optimum flexibility. Some, however, are not recommended. See individual jaws for recommendations.Nova chucks are specially designed so the jaws cut into the wood, grip firmly in the contraction mode and provide high tear out strength.

Pages: first pageprev page1 2 3 4 5 6 7 8 9 10next pagelast page