Pages: first pageprev page1 2 3 4 5 6 7 8 9 10next pagelast page

Nova Chuck Jaw Sets

Nova Chuck Jaw Sets
$41.49

Choose the jaw set that best fits the needs of your turning project! Nova jaws boast superb holding power when matched with the appropriate workpiece. They cut into the wood, grip firmly in both contraction and expansion mode and provide high tear out strength. These jaws fit all of the Nova chucks, allowing you to interchange the jaws across all chuck models to achieve different capacities. Some jaws, however, are not recommended for use with certain chucks.Features:Nova chucks give you the same jaw fixing system and same insert/adaptersystem across all chuck models.All accessory jaws in the range will fit all the chucks in the range for optimumflexibility. Some, however, are not recommended. See individual jaws forrecommendations.Nova chucks are specially designed so the jaws cut into the wood, grip firmly inthe contraction mode and provide high tear out strength.

Shellawax Cream Friction Polish, 8.45 fl. oz.

Shellawax Cream Friction Polish, 8.45 fl. oz.
$40.99

Shellawax Cream Friction Polish is a durable, one-application woodturner's friction polish that is also available in liquid form (33538, sold separately). Due to its slower drying characteristics, the cream version is perfect for eliminating rag marks that result from premature drying on large spindles and bowls. The cream is also ideal for woodcarvings and small flat surfaces. Shellawax Cream can be mixed with Shellawax Liquid as a dry time extender for that product, and can also be thinned with Shellawax Liquid if it is too thick. Shellawax is for use on unfinished wood only. On the lathe it gives a brilliant shine in seconds and can be handled immediatelyOn woodcarvings and flat surfaces it gives a rich, deep shine in a matter of minutesMade from a mixture of white shellac and waxes, including Carnauba wax and Bee's waxNon-toxic and water-resistant Please note that these items can only be shipped to addresses within the continental United States by UPS Ground only.

Nova Faceplate Rings

Nova Faceplate Rings
$37.49

Faceplates have always been regarded as a safe and secure holding method for large turnings such as bowls and platters. The only drawback is that they are a slower mounting method when compared to scroll action chucks. Now, however, you can have the best of both worlds! Nova Faceplate Rings offer the same secure holding power of a faceplate, but you can hold them with your Nova scroll chuck for the ultimate in speed and convenience. Simply screw the faceplate ring to your turning blank, then secure the ring in your chuck. The faceplate rings are available in three sizes for a wide range of workpiece sizes. The size of your faceplate ring should match the size of the jaws on your Nova chuck.Faceplate Rings fit directly into your Teknatool Chuck (matching size of jaws must be mounted on the chuck).No need to remove the chuck from your lathe as you would with traditional faceplate mounting.Fast mounting method for bowl blanks.Best alternative to Woodworm screw mounting, which is only recommended for smaller bowls.Can also be used for moderate off-center multi-axis turning.Faceplate mounting is a strong mounting method, even with irregular sized wood and rough cut surfaces.Specifications:50mm (2") faceplate ring fits 50mm jaws. Faceplate diameter is 3".100mm (4") faceplate ring fits 100mm jaws. Faceplate diameter is 5".130mm (5") faceplate ring fits 130mm jaws, Faceplate diameter is 6-1/4".

Nova Mini 20mm Jaw Set

Nova Mini 20mm Jaw Set
$35.99

The Nova Mini Jaws are ideal for use with mini and midi lathes, and are capable of holding work below the size handled by the 25mm (1") jaws. They are designed to securely hold small bowls up to 6" in diameter, and small, free-end spigot turnings up to 5" long. They can be used in expansion mode for bowls, or in contraction mode for spigots. Made from K1045 medium tensile carbon steel to provide maximum structural strength. A quick and easy workholding solution for small bowls and small unsupported spigot work.A great range of smaller projects can be mounted and turned using either the expansion mode (mostly for bowls) or the contraction mode (mostly for spigots).Multiple turned pieces (i.e. lace bobbins) can be turned from dowel stock.Made from K1045 steel for maximum structural strength.The standard Woodworm Screw (included with Nova chucks) can be used with these jaws.2-year warranty.Capacity range when used with Nova Precision Midi chuck (47447, sold separately):Expansion mode: 0.79" to 1.63". Contraction mode (square stock): 0.39" to 0.79".Contraction mode (spigot): 0.32" to 1.18".Capacity range when used with Nova G3 chuck (45748, sold separately):Expansion mode: 0.79" to 1.63".Contraction mode (square stock): 0.39" to 0.79".Contraction mode (spigot): 0.32" to 1.18".Capacity range when used with Nova SuperNova 2 chuck (48906, sold separately):Expansion mode: 0.79" to 1.63".Contraction mode (square stock): 0.39" to 0.79".Contraction mode (spigot): 0.32" to 1.18".Capacity range when used with Nova Titan chuck (45040, sold separately):Expansion mode: 0.79" to 2".Contraction mode (square stock): 0.39" to 1.18".Contraction mode (spigot): 0.32" to 1.57".Features standard on all Nova Jaws:Nova chucks give you the same jaw fixing system and same insert/adapter system across all chuck models.All accessory jaws in the range will fit all the chucks in the range for optimum flexibility. Some, however, are not recommended. See individual jaws for recommendations.Nova chucks are specially designed so the jaws cut into the wood, grip firmly in the contraction mode and provide high tear out strength.

Nova Lathe Handwheel

Nova Lathe Handwheel
$35.49

The Nova Lathe Handwheel is used on the outboard end of the headstock spindle, and can be used to rotate the turning blank or to slow down the spindle by hand once the lathe is switched off. Made from precision machined solid 1045K steel for extra strength and rigidity. A custom wooden handwheel can be turned by the user and installed for extra comfort. The same handwheel comes standard with all Nova DVR Lathes, and can be used on all Nova lathes except for the Nova Comet II Midi Lathe. Compatible with all Nova lathes except for the Comet II Midi Lathe.Used on outboard end of lathe headstock to position work by hand (lathe must be switched off).Machined from solid 1045K steel. User can add customized wooden outer wheel for extra comfort and personalization.Hollow to allow for vacuum chucking.A genuine Nova accessory.

Shellawax Liquid Friction Polish

Shellawax Liquid Friction Polish
$32.99

Shellawax Liquid Friction Polish gives an instant shine to your woodturnings, or can be used to thin Shellawax Cream for use on large woodturnings, flat wood and carvings.The Shellawax Liquid Friction Polish is the fastest and easiest-to-use polish on the market, giving an instant shine to all timbers.It is used with the lathe running, and, under heat (created through friction), it is fused into the timber.Dries instantly, and can be handled immediately after application.Can be mixed with Shellawax Cream as an extender. This allows for better use of these products on large turned work and for hand-rubbed work.Please note that these items can only be shipped to addresses within the continental United States by UPS Ground only.

1-1/4" X 8 TPI Insert for Oneway Scroll Chuck System

1-1/4" X 8 TPI Insert for Oneway Scroll Chuck System
$31.49

Allows you to mount a Oneway Scroll Chuck (22719, sold separately) or Talon Chuck (20761, sold separately) to a lathe with a 1-1/4" x 8 TPI drive spindle.

1" X 8 TPI Insert for Oneway Scroll Chuck System

1" X 8 TPI Insert for Oneway Scroll Chuck System
$31.49

Allows you to mount a Oneway Scroll Chuck (22719, sold separately) or Talon Chuck (20761, sold separately) to a lathe with a 1" x 8 TPI drive spindle.

3/4" X 16 TPI Insert for Oneway Scroll Chuck System

3/4" X 16 TPI Insert for Oneway Scroll Chuck System
$31.49

Allows you to mount a Oneway Scroll Chuck (22719, sold separately) or Talon Chuck (20761, sold separately) to a lathe with a 3/4" x 16 TPI drive spindle.

Taper-Lock Adapter for Stronghold Chuck, 1"-8, RH/LH

Taper-Lock Adapter for Stronghold Chuck, 1"-8, RH/LH
$31.49

Allows you to mount a Oneway Stronghold Chuck (30589, sold separately) to a lathe with a 1" x 8 TPI drive spindle.Note: If your lathe has less than a 16" swing, the Oneway Talon Chuck (20761, sold separately) is recommended. Stronghold Chuck jaws are NOT compatible with either the original Oneway Chuck or the Talon Chuck.

Nova Comet II Versaturn Coupler

Nova Comet II Versaturn Coupler
$31.49

With just a 1/4 turn of the Versaturn Coupler, you can transform your Comet II Midi Lathe into a variety of tools, including a precision bench grinder. The coupler lets you easily remove and attach any Versaturn Accessory (sold separately)- just insert the end into the coupler and rotate the sturdy locking mechanism to lock the accessory securely in place.For use with the Nova Comet II Midi Lathe (46457, sold separately).Use the Versaturn Grinding Wheel (47394, sold separately) with the Versaturn Coupler to turn your lathe into an all-purpose sharpening station.Using appropriate accessories, you can also turn your Comet II Midi Lathe into a wire brush, sanding disc, belt sander or whetstone.

Starting Out Woodturning, DVD

Starting Out Woodturning, DVD
$29.99

With its simple step-by-step approach, this Robert Sorby-led DVD aims to remove much of the mystique surrounding this popular craft. It tackles a wide range of subjects - including selecting wood, learning the lathe, using and caring for the basic tools and applying finishes- and guides viewers through three elementary projects-a bud vase, a goblet, and a bowl. Close ups and action shots make this a thoroughly informative companion for the beginning turner. 100 minutes.

Nova Cole Jaw Buffers

Nova Cole Jaw Buffers
$29.99

Nova Cole Jaw Buffers are an accessory for the Nova Cole Jaws and Nova Mini Cole Jaws (45174 and 45274, sold separately). The buffers are designed to safely and securely hold your turned edge bowls and large diameter cylinders so you can make the finishing cuts to the bottom side. The kit includes two different sets of buffers - multi-sided buffers and long pin buffers‐to cover most workholding requirements. The multi-sided buffers are reinforced with steel so they won't deform under pressure and pull the turning blank away from the jaws. The pin buffers are designed for maximum surface contact on longer turnings. Eight of each style are included, along with fastenings. Two different complete sets of buffers to cover a majority of holding requirements: a multi sided buffer and a long pin buffer.The multi-sided buffer is reinforced with steel to provide a super solid mounting.Buffers can be positioned and locked in a variety of different ways, giving maximum flexibility for the turner.Reinforced steel rubber gives the multi-sided buffer exceptional grip. The rubber won't collapse and pull the bowl away from the jaws when tightened.The pin buffer provides longer contact surface away from the jaws. It is ideal for holding longer or oddly shaped projects.Only for use on Nova Cole Jaw and Mini Cole Jaw sets (45174 and 45274, sold separately). Not recommended for use on any other re-chucking system.

Nova Tool Rest

Nova Tool Rest
$29.99

The tool rest is one of the most important features on any lathe. The rest should allow for maximum flexibility of chisel movement and provide adequate chisel support as close to the cutting edge as possible. These Nova tool rests are made of cast iron for excellent rigidity, and come with a standard 1" shank to fit any Nova Lathe.Nova 12" (300mm) Tool Rest (TR300/1):Ideal for larger work where you want more mobility without having to readjust.Fits all lathes with a 1" (25mm) shank.Ribbed design for maximum rigidity.Solid cast iron for strength.Fits all NOVA Lathes (excluding Nova Comet II Midi Lathe).Nova 4" (100mm) Tool Rest (TR100/1):Handy for smaller work when you don't want a toolrest to get in the way.The 1"/25mm shank delivers a super strong platform.Ribbed design for maximum rigidity.Solid cast iron for strength.Fits all Nova lathes and all lathes with a 1"/25mm shank.

Carter Hollow Roller Mounting Stud 1000-45

Carter Hollow Roller Mounting Stud 1000-45
$29.99

Adapt your lathe to use the Carter Hollow Roller Vessel Turning System using this easily installed Mounting Stud! Works with Delta 46-700/701, General 260, Jet 1236, Jet 1442, Jet 1642, Nova 1500, Nova 3000, Oneway 1224, Oneway 1640 and most lathes with a 1" tool rest post. Includes a second lengthened stud for the secondary tool rest.Technical Details:Adapts your lathe to use the Carter Hollow Roller Vessel Turning SystemWorks with Delta 46-700/701, General 260, Jet 1236, Jet 1442, Jet 1642, Nova 1500, Nova 3000, Oneway 1224, Oneway 1640 and most lathes with 1" tool rest postIncludes a second lengthened stud for the secondary tool restMade in USAOne Second Lengthened Stud for the Secondary Tool Rest

4-3/4" Face Plates

4-3/4" Face Plates
$29.99

This 4-3/4” diameter face plate mounts to a wide variety of lathe spindles by changing the threaded 1" x 8 TPI insert (#22432 Sold Separately). It is capable of being with Delta and Jet lathes just to mention a few and is idea for small to medium sized turning projects.The face plate is drilled with 3 countersunk screw holes to attach the insert form the back.

Woodworker's Journal Getting Started in Woodturning DVD

Woodworker's Journal Getting Started in Woodturning DVD
$29.99

Woodturning is growing in popularity as people of all stripes discover that it is inexpensive and easy to get started in this practical, fun and creative craft. This entertaining full-length DVD teaches everything you'll need to know to start woodturning safely and with more than enough knowledge to have fun right from the start.This fun to watch DVD will cover these topics and more: Woodturning tools and how to use themThe parts of a lathe and what they doSpindle turning: cutting coves and beads, using spindle gouges, skews and scrapersBowl turning (face plate turning): mounting large blanks and mastering the bowl gougeSanding and finishing on the lathe In addition, we've included a bonus sharpening section teaching how to get your tools sharp and keep them that way.Ernie Conover: With more than 40 years of experience teaching woodturning, Ernie is the perfect person to instruct people beginning in the craft of woodturning. A talented woodworker across the spectrum of woodworking, he was also one of the founding members of the American Association of Woodturners.Kimberly McNeelan: A professional woodworker and author, Kimberly brings a fresh and artistic bent to her woodworking. Her focus is "aesthetically pleasing and functional wood furniture." A regular contributor to Woodworker's Journal magazine and website, Kimberly is a rising star in the world of woodworking.

Taper-Lock Adapter for Stronghold Chuck, 1-1/4"-8, RH/LH

Taper-Lock Adapter for Stronghold Chuck, 1-1/4"-8, RH/LH
$29.39

Allows you to mount a Oneway Stronghold Chuck (30589, sold separately) to a lathe with a 1-1/4" x 8 TPI drive spindle.Note: If your lathe has less than a 16" swing, the Oneway Talon Chuck (20761, sold separately) is recommended. Stronghold Chuck jaws are NOT compatible with either the original Oneway Chuck or the Talon Chuck.

Pages: first pageprev page1 2 3 4 5 6 7 8 9 10next pagelast page