Pages: first pageprev page2 3 4 5 6 7 8 9 10 11next pagelast page

Lathe Tool Holder

Lathe Tool Holder
$27.99

Keep your turning tools within reach! This specially designed holder mounts to most flatbed lathes to keep up to 12 turning tools and other turning supplies at the ready.12" diameter tray features six slots for standard size tools and six for miniature tools and spins to make tool selection convenient.The flat center platform is ideal for sandpaper, glue, calipers and additional supplies.Mounts anywhere on your lathe bed and pivots to bring tools exactly where you want them.Plastic tray with steel pivot arm.

Carter Hollow Roller Mounting Stud 0625-35

Carter Hollow Roller Mounting Stud 0625-35
$26.29

Adapt your lathe to use the Carter Hollow Roller Vessel Turning System using this easily installed Mounting Stud! Works with Delta Midi, Jet Mini 1014, Jet Midi 1220, Nova Mercury, Rikon Mini, and most Mini and Midi lathes with a 5/8" tool rest post.Technical Details:Adapts your lathe to use the Carter Hollow Roller Vessel Turning SystemWorks with Delta Midi, Jet Mini 1014, Jet Midi 1220, Nova Mercury, Rikon Mini, and most Mini and Midi lathes with a 5/8" tool rest postMade in USA

4'' Large Dust Hood

4'' Large Dust Hood
$25.99

Large 12-1/2" x 16-1/2" hood opening makes this ideal for collecting dust from miter saws, lathes, radial arm saws, carving, sanding, and planers without hoods. Product is Lightweight and portable; easy to position anywhere.

Nova Insert/Adapter, 1" 8-TPI RH/LH Dual Thread

Nova Insert/Adapter, 1" 8-TPI RH/LH Dual Thread
$25.49

All insert-style Nova chucks use an easy and inexpensive insert/adapter system that lets you mount your chuck on virtually any lathe. The inserts are available with a variety of thread patterns on the interior, but all have the same exterior thread to fit all your Nova chuck(s). Just check the manual of your lathe to find the threading of your headstock spindle and purchase the corresponding adapter. Once the insert is in place, threading the chuck onto your lathe is a simple matter. The insert system also guarantees that you'll still be able to use your Nova chucks, even if you upgrade or change lathes later. If an insert/adapter is not available to match your lathe, you can have one threaded from a Blank Insert/Adapter (46298, sold separately). Also see our Chuck Spanner (49013, sold separately), which is useful for tightening the inserts in place. All insert-style Nova chucks (apart from the obsolete Compac chuck) use the same insert/adapter system to ensure maximum adaptability and flexibility for the user.Large range of inserts fit many different popular lathe models (see below). This makes it easy to bring your chucks with you when you change lathes.Inserts are threaded both inside and out. Outside thread is made to fit into the Nova Chucks. The inside thread fits onto your lathe.Note: Directly threaded chucks cannot be adapted to insert-style chucks.

Nova Insert/Adapter, Blank, Unthreaded

Nova Insert/Adapter, Blank, Unthreaded
$25.49

If you have a unique lathe with a non-standard spindle thread, you can still install a Nova chuck on it. This blank Insert/Adapter can be threaded to match spindles up to 1-1/8" (28mm). The outer diameter is pre-threaded - simply screw it into the back of any current model of Nova chuck. Compatible with all Nova chucks, with the exception of the obsolete Compac chuck.Blank insert can be threaded to match spindles up to 28mm (1-1/8").

Nova Chuck Inserts/Adapters

Nova Chuck Inserts/Adapters
$25.49

Teknatool uses an easy and inexpensive insert/adapter system on all insert-style Nova chucks. The inserts are available with a variety of thread patterns on the interior, but all have the same exterior thread to fit all your Nova chuck(s). Just check the manual of your lathe to find the threading of your headstock spindle and purchase the corresponding adapter. Once the insert is in place, threading the chuck onto your lathe is a simple matter. The insert system also guarantees that you'll still be able to use your Nova chucks, even if you upgrade or change lathes later. If an insert/adapter is not available to match your lathe, you can have one threaded from a Blank Insert/Adapter (46298, sold separately). Also see our Chuck Spanner (49013, sold separately), which is useful for tightening the inserts in place. Adapts any Nova chuck to almost any lathe spindle at low cost.All insert-style Nova chucks (apart from the obsolete Compac chuck) use the same insert/adapter system to ensure maximum adaptability and flexibility for the user.Large range of inserts to fit many different popular lathe models (see below).Inserts are threaded both inside and out. Outside thread is made to fit into the Nova Chucks. The inside thread comes in a variety of sizes; the one you need will depend on what lathe you have.Note: Directly threaded chucks cannot be adapted to insert-style chucks.Nova Insert/Adapter, 1-1/4" 8-TPI - Item #: 45402 is designed for Reversible lathes

Replacement Buttons for Longworth Style Chucks, 8-Pack

Replacement Buttons for Longworth Style Chucks, 8-Pack
$24.99

These silicone buttons are replacements for the stock buttons that come on the Longworth Style Chucks (49046 and 48730, sold separately). The buttons are designed to expand under pressure to hold your bowl turnings so you can make the finishing cuts to the bottom side. Soft silicone material grips tightly, but won't mar your workpiece. The kit includes eight silicone buttons plus the installation hardware.For use with the Longworth Style Chucks (49046 and 48730, sold separately).Silicone material is very pliable, giving the buttons excellent grip and durability.Includes eight buttons, plus fastening hardware.

Wood Lathe Tailstock Center, MT2

Wood Lathe Tailstock Center, MT2
$24.99

Precision ball bearings bring you the smoothest possible turning with greater speed capabilities, and no need to lubricate. Live centers also allow greater clamping pressures while still retaining their incredibly smooth rotation. This center is precision machined to a 60 degree point and includes a #2 morse taper. Also available for #1 morse taper.Technical Details:Live center (revolving center) features sealed ball bearings for smooth, maintenance-free operation.Precision machined to a 60 degree point.Includes #2 morse taper (permanently attached)

Wood Lathe Tailstock Live Center, MT1

Wood Lathe Tailstock Live Center, MT1
$24.99

Precision ball bearings bring you the smoothest possible turning with greater speed capabilities, and no need to lubricate. Live centers also allow greater clamping pressures while still retaining their incredibly smooth rotation. This center is precision machined to a 60 degree point and includes a #1 morse taper. Also available for #2 morse taper.Technical Details:Live center (revolving center) features sealed ball bearings for smooth, maintenance-free operation.Precision machined to a 60 degree point.Includes #1 morse taper (permanently attached).1-1/4" overall diameter.

Carter Hollow Roller Mounting Stud 1000-60

Carter Hollow Roller Mounting Stud 1000-60
$24.99

Adapt your lathe to use the Carter Hollow Roller Vessel Turning System using this easily installed Mounting Stud! Works with Laguna 163, Oneway 2036, Oneway 2436, Powermatic 3520, Powermatic 4224 and most lathes with a longer 1" tool rest post. Includes a second lengthened stud for the secondary tool rest.Technical Details:Adapts your lathe to use the Carter Hollow Roller Vessel Turning SystemWorks with Laguna 163, Oneway 2036, Oneway 2436, Powermatic 3520, Powermatic 4224 and most lathes with a longer 1" tool rest postIncludes a second lengthened stud for the secondary tool restMade in USAOne Second Lengthened Stud for the Secondary Tool Rest

Carter Hollow Roller Mounting Stud 1125-65

Carter Hollow Roller Mounting Stud 1125-65
$24.99

Adapt your lathe to use the Carter Hollow Roller Vessel Turning System using this easily installed Mounting Stud! Works with Powermatic 3520 and most lathes with a longer 1-1/8" tool rest post. Includes a second lengthened stud for the secondary tool rest.Technical Details:Adapts your lathe to use the Carter Hollow Roller Vessel Turning SystemWorks with Powermatic 3520 and most lathes with a longer 1-1/8" tool rest postIncludes a second lengthened stud for the secondary tool restMade in USAOne Second Lengthened Stud for the Secondary Tool Rest

Carter Hollow Roller Mounting Stud 1125-45

Carter Hollow Roller Mounting Stud 1125-45
$24.99

Adapt your lathe to use the Carter Hollow Roller Vessel Turning System using this easily installed Mounting Stud! Works with Powermatic 45 & 90 lathes and most lathes with a 1-1/8" tool rest post. Includes a second lengthened stud for the secondary tool rest.Technical Details:Adapts your lathe to use the Carter Hollow Roller Vessel Turning SystemWorks with Powermatic 45 & 90 lathes and most lathes with a 1-1/8" tool rest postIncludes a second lengthened stud for the secondary tool restMade in USAOne Second Lengthened Stud for the Secondary Tool Rest

Lathe Dust Hood

Lathe Dust Hood
$24.99

Lathe dust collection has never been easier! Hood assembly features a hinged viewing shield that can swing up and out of the way. Hood mounts by clamping the bracket to the back of the lathe bed.Includes convenient mounting bracket that allows easy installation onto many different styles of lathe.For use with 4" hose.

The Lathe Book Completely Updated and Revised

The Lathe Book Completely Updated and Revised
$24.95

No other book gives you such valuable information on the essential turning tool. Completely revised and updated, The Lathe Book is the comprehensive guide to woodturning machinery, incorporating the many innovations in the lathe and its accessories.Written by Ernie ConoverSoftcover, 8 X 10 in.192 pages, with color photos and drawingsPublished 2001A complete guide to the machine and its accessories.This book covers every aspect of the lathe, including how to choose one, how to select tools and accessories, how to maintain and repair the machine, and basic techniques. You will get:expert advice on choosing a lathetips on maintaining a lathe for optimal performanceeasy-to-follow basic techniques that help build lathe skillsmore than 220 color photos and illustrations"...a comprehensive guide to wood lathes..." -- Woodshop NewsThe Lathe Book

The Complete Guide to Turning Pens & Pencils, Book

The Complete Guide to Turning Pens & Pencils, Book
$24.95

Create a pen or pencil from scratch with the professional guidance and unique ideas of legendary woodworker Walter Hall. Hall's "The Complete Guide to Turning Pens & Pencils" is a comprehensive collection of tips, techniques, and step-by-step photographs showing how to make 12 pens and three pencils. Project skill requirements range from basic to intermediate to advanced, with some projects only requiring a short amount of time with a standing lathe or even a small, portable model. Hall clearly presents detailed information on materials, equipment, and techniques for sanding, polishing, and finishing. Plus, turners will love the extensive gallery of actual-size pens and pencils for inspiration! 176 pages.Technical Details:A comprehensive "how to" on making pens and pencilsStep-by-step photographs on how to make 12 pens and three pencilsIncludes detailed information on materials and equipmentProvides techniques for sanding, polishing, and finishingProject skill requirements range from basic to intermediate to advancedIncludes an extensive photo gallery of actual-sized pens and pencils176 pages by Walter Hall

Taunton's Complete Illustrated Guide to Box Making, Book

Taunton's Complete Illustrated Guide to Box Making, Book
$24.95

Create, shape and finish boxes with beautiful results Making small boxes is a favorite project for many woodworkers. While it may seem a simple process, there are many ways to build a box -- and in this comprehensive pictorial reference, veteran woodworker Doug Stowe covers all the techniques you will need to produce boxes you'll be proud of.You'll learn about making boxes by using traditional carcase joinery or by shaping on the bandsaw or lathe. Stowe also covers special boxmaking techniques associated with making lids and bases, attaching them to the box, and partitioning boxes to hold small objects like jewelry. Additionally, there are a host of techniques for creating special effects that decorate a box, turning the small, useful object into a jewel itself. This book covers all these methods in a highly visual format that has become the hallmark of the Complete Illustrated Guide series: Everything is covered in over 500 step-by-step photos accompanied with straightforward text. About the author Doug Stowe is a professional furniture designer and box maker. His work has been featured in national woodworking magazines and is the author of Creating Beautiful Boxes with Inlay Techniques and Simply Beautiful Boxes. He lives on a hillside overlooking Eureka Softcover, 9-3/16 x 10-7/8 in., 160 pages, with color photos and drawings Published 2004, ISBN 1-56158-593-9, # 070721Taunton's Complete Illustrated Guide to Box Making Preview

Turning Toys with Richard Raffan, Book

Turning Toys with Richard Raffan, Book
$24.95

With the help of Richard Raffan and the fun-filled projects in Turning Toys, your shop just might start to feel like Santa's workshop. And there are toys to delight the whole year round in this book. From race cars and lawn games to spinning tops and sets of fruits and veggies, there's something for every boy and girl. Turning Toys is filled with practical advice to help you succeed and enjoy the process of creating beautiful toys. With over 360 photos and drawings, you'll learn exactly how to use the tools required, control the cutting edge, and work comfortably at your lathe. Be sure to also check out the companion DVD, Turning Toys with Richard Raffan (54587, sold separately), which includes video instructions for eight projects. Paperback. 192 pages. Contents: Chapter 1: Safe DesignChapter 2: ToolsChapter 3: Wood and Preparing BlanksChapter 4: Things We Forget (But Shouldn't)Chapter 5: Turning Cylinders and DowelsChapter 6: Turning WheelsChapter 7: Wheely BugChapter 8: Racing CarChapter 9: PeggiesChapter 10: WandsChapter 11: StackersChapter 12: SpheresChapter 13: Fruit and Vegetables to 'Cut'Chapter 14: Croquet SetChapter 15: Teether and RattleChapter 16: Nesting TubsChapter 17: GobletChapter 18: BilboquetChapter 19: Spinning TopsChapter 20: Balance TrayChapter 21: Table SkittlesFinal Touches About the Author: Richard Raffan is internationally acclaimed for both his turning and teaching. Well-known for his gallery-quality production work, he is the author of Turning Wood, Turning Boxes, Turning Bowls, The Art of Turned Bowls, and The Complete Illustrated Guide to Turning. He has also appeared in three feature-length instructional videos, including the best-selling Turning Wood with Richard Raffan.Turning Toys

Nova 2MT Spur Center

Nova 2MT Spur Center
$24.49

This is the standard spur center included with all Nova lathes, and it also works well as a replacement or as an upgrade for another lathe. Its rugged four-prong profile bites into your wood blank to provide a secure grip for spindle turnings and other demanding workpieces. Precisely machined from medium-tensile carbon steel. Fits all Nova lathes, as well as any wood lathe with a 2MT headstock. Overall diameter is 30mm. Inside cone is 8mm at base.

Pages: first pageprev page2 3 4 5 6 7 8 9 10 11next pagelast page