Pages: first pageprev page1 2 3 4 5 6next pagelast page

One of a Kind Redwood Burl Slab - 52'' L x 13'' W x 2'' Thickness

One of a Kind Redwood Burl Slab - 52'' L x 13'' W x 2'' Thickness
$329.99

Each of these unique slabs is individually cut to reveal the most interesting grain and to preserve as much of the natural live edge as possible - use them for table tops, clock faces, signs, decorative wall hangings and whatever else your imagination can drum up. Live edge slabs reveal the individual character of the tree from which they were cut, and provide woodworkers with beautiful wide boards that would otherwise be ripped thin if milled for yield. Because of their width, most of these slabs won't fit through a jointer or planer. Instead, they are carefully flattened on a custom-built, manually-operated mill. The slabs are then sanded to 150-grit and given a light of coat of clear shellac for protection. All of these slabs are sourced from small family-owned mills that practice responsible land management. For dimensions refer to the grid in the photo: each red square represents 12''; each black square represents 4'' When necessary, checking and defects are carefully patched at the mill Sanded to 150-grit and coated with shellac for protection

Triton TPL180 7'' Triple-Blade Planer

Triton TPL180 7'' Triple-Blade Planer
$249.99

If you regularly work with heavy timbers or extra-thick dimensional lumber, you'll immediately see the usefulness of the Triton TPL180. Rather than attempting to feed a heavy workpiece through a conventional planer, you take a lightweight planer to the workpiece, saving your back and a lot of effort. It's also ideal for planing wide table tops or surfacing preassembled furniture for refinishing. With its patented, 3-blade design and 10-position depth control knob, you'll get precise material removal with minimal setup time. The front handle with soft grip is adjustable for added comfort. Ultra-wide 7'' planing width and the ability to remove up to 5/64'' in a single pass. Includes wrench, dust connector, set guide fence and three 7'' blades. Powerful 1500W motor for heavy duty planing of the toughest wood surfacesPower-on neon light indicates a live power connectionMagnesium construction for superior strength and durability without adding excessive weightNon-slip rubber over-molded grip offers increased support, safety and controlFully cast base ensures flatness and increases accuracy of cutLow center of gravity design for stability and control3-Blade drum design for faster, smoother cuts and a superior finish180mm / 7'' planing width for maximum productivity10-Position depth control dial sets the cut depth from 0-5/64''65Mn Blades are reversible for extended lifeAdjustable bail handle for additional control and safetyDust port for connection to a dust extraction system

One of a Kind Hemlock Slab - 60'' L x 17'' W x 2'' Thickness

One of a Kind Hemlock Slab - 60'' L x 17'' W x 2'' Thickness
$249.99

Each of these unique slabs is individually cut to reveal the most interesting grain and to preserve as much of the natural live edge as possible - use them for table tops, clock faces, signs, decorative wall hangings and whatever else your imagination can drum up. Live edge slabs reveal the individual character of the tree from which they were cut, and provide woodworkers with beautiful wide boards that would otherwise be ripped thin if milled for yield. Because of their width, most of these slabs won't fit through a jointer or planer. Instead, they are carefully flattened on a custom-built, manually-operated mill. The slabs are then sanded to 150-grit and given a light of coat of clear shellac for protection. All of these slabs are sourced from small family-owned mills that practice responsible land management. For dimensions refer to the grid in the photo: each red square represents 12''; each black square represents 4'' When necessary, checking and defects are carefully patched at the mill Sanded to 150-grit and coated with shellac for protection

One of a Kind Hemlock Slab 49'' L x 17'' W x 2.5'' Thickness

One of a Kind Hemlock Slab 49'' L x 17'' W x 2.5'' Thickness
$249.99

Each of these unique slabs is individually cut to reveal the most interesting grain and to preserve as much of the natural live edge as possible - use them for table tops, clock faces, signs, decorative wall hangings and whatever else your imagination can drum up. Live edge slabs reveal the individual character of the tree from which they were cut, and provide woodworkers with beautiful wide boards that would otherwise be ripped thin if milled for yield. Because of their width, most of these slabs won't fit through a jointer or planer. Instead, they are carefully flattened on a custom-built, manually-operated mill. The slabs are then sanded to 150-grit and given a light of coat of clear shellac for protection. All of these slabs are sourced from small family-owned mills that practice responsible land management. For dimensions refer to the grid in the photo: each red square represents 12''; each black square represents 4'' When necessary, checking and defects are carefully patched at the mill Sanded to 150-grit and coated with shellac for protection

One of a Kind Hemlock Slab 63'' L x 16'' W x 2'' Thickness

One of a Kind Hemlock Slab 63'' L x 16'' W x 2'' Thickness
$249.99

Each of these unique slabs is individually cut to reveal the most interesting grain and to preserve as much of the natural live edge as possible - use them for table tops, clock faces, signs, decorative wall hangings and whatever else your imagination can drum up. Live edge slabs reveal the individual character of the tree from which they were cut, and provide woodworkers with beautiful wide boards that would otherwise be ripped thin if milled for yield. Because of their width, most of these slabs won't fit through a jointer or planer. Instead, they are carefully flattened on a custom-built, manually-operated mill. The slabs are then sanded to 150-grit and given a light of coat of clear shellac for protection. All of these slabs are sourced from small family-owned mills that practice responsible land management. For dimensions refer to the grid in the photo: each red square represents 12''; each black square represents 4'' When necessary, checking and defects are carefully patched at the mill Sanded to 150-grit and coated with shellac for protection

Tormek HTK-706 Hand Tool Kit

Tormek HTK-706 Hand Tool Kit
$215.00

With the six jigs in this kit, you'll be able to shape and sharpen all your knives, scissors, shears, draw knives and axes, as well as short chisels and carving tools. Each jig perfectly replicates the edge angle so you can sharpen faster than ever. The jigs in this kit work with the T-7 and T-4 Tormek Sharpening Systems (35254 and 53332, sold separately) as well as the older T-3 system. The Knife Jig (SVM-45) works to sharpen most knives, including carver's draw knives. Long knives need to be stiff, and the minimum blade length is 2-3/8'' (60mm)The Long Knife Jig (SVM-140) is suitable for long and flexible knives. The jig's 5-1/2'' (140mm) width stabilizes a thin blade. Requires minimum blade length of 6-5/16'' (160mm)The Scissors Jig (SVX-150) is for scissors of all sizes as well as shears. It is also suitable for portable electric hand planer bladesThe Short Tool Jig (SVS-32) is for straight-shanked carving gouges and V-tools down to 1-3/4'' (45mm) long. It also sharpens short wood chisels and tools for power carvers. Maximum tool width is 1-1/4'' (32mm)The Axe Jig (SVA-170) sharpens carving and carpenter's axes. It accommodates a maximum axe height of 6-11/16'' (170mm), and copes with both straight and curved edgesThe Small Knife Holder (SVM-00) enables you to sharpen the smallest knife blades like carving knives and pocket knives. Works in conjunction with the SVM-45 Knife Jig

One of a Kind Beech Slab - 66'' L x 15'' W x 2'' Thickness

One of a Kind Beech Slab - 66'' L x 15'' W x 2'' Thickness
$199.99

Each of these unique slabs is individually cut to reveal the most interesting grain and to preserve as much of the natural live edge as possible - use them for table tops, clock faces, signs, decorative wall hangings and whatever else your imagination can drum up. Live edge slabs reveal the individual character of the tree from which they were cut, and provide woodworkers with beautiful wide boards that would otherwise be ripped thin if milled for yield. Because of their width, most of these slabs won't fit through a jointer or planer. Instead, they are carefully flattened on a custom-built, manually-operated mill. The slabs are then sanded to 150-grit and given a light of coat of clear shellac for protection. All of these slabs are sourced from small family-owned mills that practice responsible land management. For dimensions refer to the grid in the photo: each red square represents 12''; each black square represents 4'' When necessary, checking and defects are carefully patched at the mill Sanded to 150-grit and coated with shellac for protection

One of a Kind Myrtle Slab - 26'' L x 11'' W x 2'' Thickness

One of a Kind Myrtle Slab - 26'' L x 11'' W x 2'' Thickness
$199.99

Each of these unique slabs is individually cut to reveal the most interesting grain and to preserve as much of the natural live edge as possible - use them for table tops, clock faces, signs, decorative wall hangings and whatever else your imagination can drum up. Live edge slabs reveal the individual character of the tree from which they were cut, and provide woodworkers with beautiful wide boards that would otherwise be ripped thin if milled for yield. Because of their width, most of these slabs won't fit through a jointer or planer. Instead, they are carefully flattened on a custom-built, manually-operated mill. The slabs are then sanded to 150-grit and given a light of coat of clear shellac for protection. All of these slabs are sourced from small family-owned mills that practice responsible land management. For dimensions refer to the grid in the photo: each red square represents 12''; each black square represents 4'' When necessary, checking and defects are carefully patched at the mill Sanded to 150-grit and coated with shellac for protection

Planer/Joiner Blade Jig SVH-320 for Tormek T-7 Sharpening System

Planer/Joiner Blade Jig SVH-320 for Tormek T-7 Sharpening System
$192.00

Sharpens HSS blades of any size.Best Used With:Tormek T-7 Sharpening System. Click Here to View Instructions:

DeWalt DW7350 Planer Stand with Integral Mobile Base

DeWalt DW7350 Planer Stand with Integral Mobile Base
$179.99

Built from tough, heavy gauge steel brackets, the DW7350 Planer Stand from DeWalt is capable of supporting even the heaviest benchtop planers. Its medium-density fiberboard top is predrilled for easy installation of any DeWalt planer, and can be easily drilled for other planers as well. Best of all, mobility comes built-in with the integral mobile case and casters. Simply use the foot pedal to lower the stand firmly to the ground, or raise it up to be rolled away. Durable and stable even under heavy loadsEasy mobility for compact storage and working on the jobsiteIncludes mobile base, stand, hardware, MDF top and metal shelfMeasures approximately 21''W x 27''L x 29-1/2''H

Triton TRPUL 3-1/4'' Unlimited Rebate Planer

Triton TRPUL 3-1/4'' Unlimited Rebate Planer
$169.99

With a blade that runs the full length of the bed, Triton's TRPUL Unlimited Rebate Planer can cut rabbets as deep as your heart desires, and also works great as a standard surface planer as well. It can hog off up to 1/8'' in a single pass, and features a 17-position depth control for fast, precise adjustment of the amount of material you want to remove. Simply repeat the passes until you reach the desired depth. The adjustable auxiliary handle adds comfort, while the integral parking stand prevents damage to the blade when you set the planer down. The blade drum can even be removed and replaced with the included sanding drum to allow easy sanding of the bottoms of your rabbets. Left or right rear dust extraction. Cutting capacities: width 3-1/4'', depth 1/8''. Weight 8.6lbs. 0-1/8'' Adjustable depth of cutVariable speed control adjusts the drum speed to suit the material3-blade drum provides a higher rate of material removal (46,500 cuts per minute)Bail handle for improved ergonomics and increased controlLeft or right rear dust extraction allows the dust/chips to be directed to either side of the workpieceDrum guard protects against exposed blades when rebatingSpindle lock button for easy drum changesParking stand protects the blades and workpiece from damage on run downPower-on neon light increases operator safety

Rockler 3-Row Ball Bearing Heavy-Duty Stand

Rockler 3-Row Ball Bearing Heavy-Duty Stand
$149.99

Get the support you need in the shop or on the job site with this 3-Row Ball Bearing Stand! This heavy-duty stand features three rows of eight 5/8" diameter steel balls that let you move your stock in either direction. Having the 3-Row Ball Bearing Stand in your shop is like having a third hand, providing critical support without friction as you make long rips or cross cuts. The 22" x 14" top makes it ideal for cutting sheet material on your tablesaw! You'll get perfectly level alignment and support for any outfeed application on any tool in your shop.Technical Details:Top measures 22" x 14" for maximum support for outfeed tablesThree rows of eight 5/8" diameter steel balls let you move your stick in either directionIdeal for use with tablesaws, planers, sanders, and drill pressesAdjustable height from 28-3/4" to 44" to give you perfect alignment with the surface of your toolFolds to 18" x 48" x 7" for convenient storage when not in useRugged construction holds up to 440 lbs.

One of a Kind Maple Burl Slab - 21'' L x 20'' W x 1'' Thickness

One of a Kind Maple Burl Slab - 21'' L x 20'' W x 1'' Thickness
$119.99

Each of these unique slabs is individually cut to reveal the most interesting grain and to preserve as much of the natural live edge as possible - use them for table tops, clock faces, signs, decorative wall hangings and whatever else your imagination can drum up. Live edge slabs reveal the individual character of the tree from which they were cut, and provide woodworkers with beautiful wide boards that would otherwise be ripped thin if milled for yield. Because of their width, most of these slabs won't fit through a jointer or planer. Instead, they are carefully flattened on a custom-built, manually-operated mill. The slabs are then sanded to 150-grit and given a light of coat of clear shellac for protection. All of these slabs are sourced from small family-owned mills that practice responsible land management. For dimensions refer to the grid in the photo: each red square represents 12''; each black square represents 4'' When necessary, checking and defects are carefully patched at the mill Sanded to 150-grit and coated with shellac for protection

1-2-3 MicroGage

1-2-3 MicroGage
$119.00

Bring machine shop accuracy to your workshop! Align, measure, calibrate and tunea variety of tools including routers, shapers, jointers, planers, drill presses, fences andmore. 1-2-3 block is made of hardened tool steel and ground to 0.0002" for ultraprecision. Dial indicator has 1" travel with 0.001" accuracy. Includes a round tip for useon flat surfaces and a 3/8" diameter flat tip for use on round and sharp surfaces suchas jointer knives. Indicator carriage assembly slides smoothly along the entire block andis secured in position with a lock screw.Two rare earth magnets hold the dial indicator to the carriage assembly.

Steel Table Frame, 18''W x 24''L x 22-1/2''H

Steel Table Frame, 18''W x 24''L x 22-1/2''H
$99.99

These steel table frames are useful in the shop as machine stands, work tables and assembly tables. The attractive finish and brushed nickel hardware mean that you get to choose-just add a top to suit the application. All can be outfitted with optional casters for easy mobility. Ideal for a nice planer stand. Durable solid steel construction-use for shop stands or living room furniturePaintable gun metal powder-coated finishHigh-quality brushed nickel hardwareEasy to assemble (includes instructions)Includes padded feet to protect your floorLegs accept casters with a 1/2'' stem (not included) if mobility or additional height are desiredNote: Not compatible with our Shop Stand Riser Blocks

One of a Kind Apple Slab - 60'' L x 9'' W x 1'' Thickness

One of a Kind Apple Slab - 60'' L x 9'' W x 1'' Thickness
$99.99

Each of these unique slabs is individually cut to reveal the most interesting grain and to preserve as much of the natural live edge as possible - use them for table tops, clock faces, signs, decorative wall hangings and whatever else your imagination can drum up. Live edge slabs reveal the individual character of the tree from which they were cut, and provide woodworkers with beautiful wide boards that would otherwise be ripped thin if milled for yield. Because of their width, most of these slabs won't fit through a jointer or planer. Instead, they are carefully flattened on a custom-built, manually-operated mill. The slabs are then sanded to 150-grit and given a light of coat of clear shellac for protection. All of these slabs are sourced from small family-owned mills that practice responsible land management. For dimensions refer to the grid in the photo: each red square represents 12''; each black square represents 4'' When necessary, checking and defects are carefully patched at the mill Sanded to 150-grit and coated with shellac for protection

PM2500 Power Tool Mobile Base

PM2500 Power Tool Mobile Base
$89.99

Small shops and garage shops always have the same challenge—how to use every square inch of available space. With the PM2500 adjustable mobile base, that challenge is infinitely easier. The base features smooth-rolling casters that let you wheel your bandsaw, table saw, sander, drill press, jointer or planer into prime real estate when needed, and against the wall for storage. The base is sturdy, easy to assemble, and adjusts in 1'' increments to fit virtually any woodworking machine from 12'' x 12'' up to 36'' x 36''. Large, industrial-grade metal foot-operated levers lock your machines to the floor a mere 3/4'' above the ground for maximum stability and a comfortable working height. Non-marking 3'' rubber wheelsOversized solid steel foot leversMetal locking mechanism for maximum strength2-point rubber leveling feetHeavy duty channeled side rails with durable powder-coated finish

Triton TCMPL 2-3/8'' Compact Palm Planer

Triton TCMPL 2-3/8'' Compact Palm Planer
$79.99

Traditional cabinetmakers and carpenters often reached for their trusty one-handed block planes for lighter duty tasks, and for good reason, too. Why wrestle with a heavy full-size planer when all you need is to chamfer a corner or dress the edge of a board that's already straight? That's the strength of Triton's TCMPL Compact Palm Planer, a tough little planer that's light and easy to handle. Its slim handle design with rubber over-molded grip means that it's easy to hold and control using just one hand. The 2-3/8'' planing width and 01.5mm (about 1/16'') adjustable planing depth is ideal for fast material removal on small to medium sized workpieces. A power lock-off switch prevents accidental operation. Stepped depth control allows accurate cutting depth from 0-1.5mm3 beveling grooves front shoe increases range of edge beveling depthsPower lock-off prevents accidental operationSlim handle design is easy to hold and control using one handRubber over-moulded grip increases control and safetyAdjustable dust extraction allows chips to be directed away from the workpieceParking stand protects the blades and workpiece from damage on rundown

Pages: first pageprev page1 2 3 4 5 6next pagelast page