Pages: first pageprev page1 2 3

Rockler Cove Edging/Dimensioning CNC Router Bit - 1" Dia x 1" H x 3/8'' R x 1/2" Shank

Rockler Cove Edging/Dimensioning CNC Router Bit - 1" Dia x 1" H x 3/8'' R x 1/2" Shank
$51.99

Create signs and table tops with decorative edging in far less time with this unique router bit mounted in your CNC machine. The innovative dual-purpose bit simultaneously cuts your parts to size and applies an edge profile, meaning there's no need to change bits, or to remove the parts to machine them again on a traditional router table. No bearing guide means longer lifespan, and no marks on the edge of your work piece from gummed up bearings. Note: For best results and longer tool life we recommend slowing the feed rate and making several passes.

Rockler Chamfer Edging/Dimensioning CNC Router Bit - 45° x 1" Dia x 1" H x 1/2" Shank

Rockler Chamfer Edging/Dimensioning CNC Router Bit - 45° x 1" Dia x 1" H x 1/2" Shank
$51.99

Create signs and table tops with decorative edging in far less time with this unique router bit mounted in your CNC machine. The innovative dual-purpose bit simultaneously cuts your parts to size and applies an edge profile, meaning there's no need to change bits, or to remove the parts to machine them again on a traditional router table. No bearing guide means longer lifespan, and no marks on the edge of your work piece from gummed up bearings. Note: For best results and longer tool life we recommend slowing the feed rate and making several passes.

Rockler Roundover Edging/Dimensioning CNC Router Bit - 1" Dia x 1" H x 3/8'' R x 1/2" Shank

Rockler Roundover Edging/Dimensioning CNC Router Bit - 1" Dia x 1" H x 3/8'' R x 1/2" Shank
$47.99

Create signs and table tops with decorative edging in far less time with this unique router bit mounted in your CNC machine. The innovative dual-purpose bit simultaneously cuts your parts to size and applies an edge profile, meaning there's no need to change bits, or to remove the parts to machine them again on a traditional router table. No bearing guide means longer lifespan, and no marks on the edge of your work piece from gummed up bearings. Note: For best results and longer tool life we recommend slowing the feed rate and making several passes.

Replacement Silicone Mat for Click-N-Carve CNCs

Replacement Silicone Mat for Click-N-Carve CNCs
$29.99

This is a replacement silicone mat for the BE3030 and BE2015 Click-N-Carve CNC Carving Machines. The mat measures 5-1/2" x 7-1/2", the ideal size for securely holding wood, as well as ABS plastic and acrylic carvings sheets.Technical Details:Silicone mat measures 5-1/2" x 7-1/2".Protects the surfaces of your project.Silicone material dampens vibrations.

Rockler Auto-Lock T-Track Clamp

Rockler Auto-Lock T-Track Clamp
$29.99

Tightening Rockler's new Auto-Lock T-Track Clamp is literally an open-and-shut case-just slide the clamp face up to your work and close the lever! Once set, the clamping pressure is always the same regardless of workpiece size, and is adjusted only if needed with the set screw. Since the clamps apply pressure from the side, the top of your workpiece is unobstructed for easy machining and sanding. The bottom-mounted pins slide inside the miter track for stability, and can be shifted for 45° angle clamping-ideal for miters and irregularly shaped objects. When used with our T-Track Table, the clamp arm can be adjusted in and out a full 3-1/2'', allowing you to easily clamp items that lie in between the T-tracks. Fast, repeatable action saves enormous amounts of time for repetitive clamping tasksClamps slide into any T-track that accepts 5/16'' T-bolts, including our T-Track Table (46654, sold separately) and many of the CNC Shark tablesAn optional Mounting Bracket (57940) is available for securing the clamp to shop-made jigs and fixturesKnurled wheel secures the clamp to your T-trackBottom-mounted alignment pins can be repositioned at 45° for angled clampingAdjustment screw is easily accessible through a hole in the handle, and adjusts clamping pressure from 10 to 500 lbsNon-slip pad on base of clamp prevents unwanted shiftingClamp face also features a pad that prevents marring your workpieceAngled notch in clamp face cradles outside corners and irregularly shaped objectsRugged steel and aluminum constructionNicely complements our T-Track Stops (e.g. 46010, sold separately)Fits all Rockler branded T-Tracks

BLOKKZ Universal Clamping Blocks, Pair

BLOKKZ Universal Clamping Blocks, Pair
$24.99

These clever little clamping blocks differ from the traditional ones in one very important way - the circular clamping surface allows force to be applied at any angle, and with pinpoint precision. That versatility means you can say goodbye to those cluttered heaps of miter blocks that are good only for specific angles. In addition to handling virtually any miter, these easily clamp notoriously difficult joints, such as scarf joints, bevels and mortise and tenon joints where the tenon extends through the mortise. They're also perfect for clamping simple ninety degree joints on large assemblies when you don't have a clamp that's long enough. It's a simple tool with utility limited only by your imagination.Technical Details:Constructed of Hard Aluminum.Clamping blocks include neoprene pads for extra grip and scratch protection.Ribbed gripping surface on the blocks also reduces slippage.Hole in clamping block allows it to be used as a hold-down.3/4" loop end is perfect for clamping long angle jointsBLOKKZ measure 5" Long x 1" Width x 5/16" ThickA length of pipe can be fed through multiple clamping blocks for easy alignment when clamping long bevel joints.

Lathe Faceplates, 1''-8 TPI

Lathe Faceplates, 1''-8 TPI
$22.99

These aluminum lathe faceplates are CNC machined for minimal runout and feature large screw holes for more workholding power. They are available in 2'' diameter (48582) and 3'' diameter (44919) sizes. The 3'' diameter faceplate includes a set screw for use on reversible lathes, but the 2'' does not have a set screw. The hubs on both are as short as possible to minimize vibration, and the thread sizes are clearly laser cut into the hubs for easy identification. 1''-8 TPI thread.

Jet Live Center MT-2, 708331

Jet Live Center MT-2, 708331
$19.99

Get greater turning speeds with this Jet Live Center MT-2, 708331. Ideal for use on your wood lathe allowing for center variations so it won't damage your work piece.Technical Details:Delivers greater turning speedsIdeal for a CNC lathe or general machining operationsAdjusts for center variations so it won't damage your workpiece

Grr-Ripper Gravity Heel Kit

Grr-Ripper Gravity Heel Kit
$15.99

The Grr-Ripper Gravity Heel Kit provides a positive hook that grips the end of your board, ideal when you need additional support for feeding hard or heavy stock through your table saw, bandsaw or router table. The heel drops down automatically, aided only by gravity, and retracts when placed in the middle of the board. This means there's no need to remove it or adjust it when it's not needed. The Gravity Heel can also be adjusted laterally to provide backup support when you wish to prevent grain blowout of any kind. Simply saw through the heel to provide zero-clearance support. Five sacrificial heels are included, plus two heel spacers and mounting hardware. Fully adjustable for stock thicknesses from 0-1''Fits all existing Grr-Ripper push blocksEasy to use with two push blocks and the leapfrog method; heels grab the tail end of your board and automatically retract mid-boardIncreases control and stability when feeding long or short stock-provides extra support to help feed stock and prevent blow out

1/4'' to 4 mm Collet Reducer for Click-N-Carve Bits

1/4'' to 4 mm Collet Reducer for Click-N-Carve Bits
$6.99

This unique collet reducer lets you to use the wide array of proprietary Click-N-Carve CNC Router Bits with the larger CNC Shark line of routers, as well as any other CNC router or handheld router with a 1/4" collet. It reduces the collet opening from 1/4" to 4mm to accept the smaller Click-N-Carve shank. The Click-N-Carve selection offers many unique router bits, including Ball Nose Bits, End Mill Bits, Conical Ball Bits, and Half-Conical Bits for CNC Carving Machines.Technical Details:Collet reduces your standard 1/4" collet to a 4mm collet, which accepts the unique Click-N-Carve router bit shanks.Compression slots in collet reducer allow for tight fit when the collet is tightened.

Pages: first pageprev page1 2 3