Pages: first pageprev page5 6 7 8 9 10 11 12 13 14next pagelast page

1-2-3 MicroGage

1-2-3 MicroGage
$119.00

Bring machine shop accuracy to your workshop! Align, measure, calibrate and tunea variety of tools including routers, shapers, jointers, planers, drill presses, fences andmore. 1-2-3 block is made of hardened tool steel and ground to 0.0002" for ultraprecision. Dial indicator has 1" travel with 0.001" accuracy. Includes a round tip for useon flat surfaces and a 3/8" diameter flat tip for use on round and sharp surfaces suchas jointer knives. Indicator carriage assembly slides smoothly along the entire block andis secured in position with a lock screw.Two rare earth magnets hold the dial indicator to the carriage assembly.

Bosch Colt™ Variable-Speed Palm Router Kit

Bosch Colt™ Variable-Speed Palm Router Kit
$119.00

Put power and precision in the palm of your hand!While it may look like a laminate trimmer, this compact (7-1/2" high) and lightweight (3.3 lbs.) router is more than shop-worthy with a 1.0 HP (max.), 5.7 amp motor - the highest rating in its class.16,000-35,000 RPM.The Colt is perfect for hinge mortising, edge forming, slot cutting, dovetailing, window cutouts, decorative inlays and more.Variable speed dial lets you match speed to workpiece and task.Soft-start reduces start-up torque.Constant Response Circuitry monitors and maintains speed under load.Quick-Clamp System allows motor to be easily adjusted or moved from base to base.Convenient front spindle lock for fast, easy one-wrench bit changes.Rubberized grip and unique finger support pockets provide additional support when trimming edges.All-metal straight-edge guide directs router along edges of workpiece or up to 3-5/8" from edge.Fast and precise depth adjustment system with micro-fine adjustment dial.Accepts 1/4" shank bits.Includes motor, aluminum fixed base, straight-edge guide, 1/4" self-releasing collet, comfortable drop-forged wrench and carrying case.#21423 Round Sub base accepts threaded template guides. #22142 Round Sub base accepts the Bosch RA-Series Template Guides.#37072 (RA1100) Template Guide Adapter for threaded templates allows use of conventional threaded template guides with the #22142 (PR009) round sub base. Allows you to use Porter-Cable template guides in the following Bosch Routers: 1613, 1613AEVS, 1613EVS, 1614, 1614EVS, 1617, 1617EVS, 1618, 1618EVS, 1619EVS

Freud 89-152 5-Pc. Round Over Router Bit Set - 1/2" Shank

Freud 89-152 5-Pc. Round Over Router Bit Set - 1/2" Shank
$117.97

Round over router bits create some of the most commonly used edge profiles in the wood shop, and with all the most popular sizes included, this set represents an excellent value. The set included a 1/2" bearing for rounding over operations, and an additional 3/8" bearing, which converts all five bits into beading bits for even more versatility. The set comes in Freud's unique "shadow box" case, which hangs on the wall or mounts on your bench to keep bits organized and protected. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on hand-held and table-mounted portable routers.Rounding over bits soften the edges of fine furniture.With the 3/8" bearing installed, they function as beading bits for making simple, decorative edges on furniture and moldings.Includes Freud's unique shadow box storage case, which can be hung on the wall or mounted on the bench to keep bits handy and safe.Cuts all composition materials, plywoods, hardwoods, and softwoods.Use on hand-held and table-mounted portable routers.Features TiCo Hi-Density carbide for longer bit life and a flawless finish.Perma-SHIELD Non-stick Coating protects from heat, gumming, and corrosion.Each bit is computer-balanced and precision-ground for the smoothest possible cuts.Freud #: 34-118Overall Diameter (A): 3/4"Carbide Height (B): 1/2"Shank (C): 1/2"Radius (R): 1/8"Overall Height: 2-1/2"Freud #: 34-120Overall Diameter (A): 1"Carbide Height (B): 1/2"Shank (C): 1/2"Radius (R): 1/4"Overall Height: 2-1/2"Freud #: 34-124Overall Diameter (A): 1-1/4"Carbide Height (B): 5/8"Shank (C): 1/2"Radius (R): 3/8"Overall Height: 2-5/8"Freud #: 34-126Overall Diameter (A): 1-1/2"Carbide Height (B): 3/4"Shank (C): 1/2"Radius (R): 1/2"Overall Height: 2-3/4"Freud #: 34-128Overall Diameter (A): 2"Carbide Height (B): 1"Shank (C): 1/2"Radius (R): 3/4"Overall Height: 2-7/8"

CMT BTS-1 Bowl & Tray Router Bit System Kit- 1-1/4" Dia x 1/2" Shank

CMT BTS-1 Bowl & Tray Router Bit System Kit- 1-1/4" Dia x 1/2" Shank
$114.99

Whether for vegetable trays, salad bowls or hors d'oeuvre platters, this kit lets you make gorgeous divided bowls quickly and easily. No lathe? No problem. A band saw or jig saw can handle the outer circumference. For the interior, all you need is this kit and a router. The kit includes two templates, a Bowl and Tray bit, and a collet extension, full instructions and an instructional DVD. The end results will astonish your friends. And what great gifts they'll make in a very short amount of time!Bowls and trays made with this set provide an excellent use for scrap wood. Glue pieces together butcher block style to make a beautiful pattern of colors and species. The templates will withstand a lifetime of use, and with a little imagination they can be used to make several styles of bowls or trays. The DVD provides specific examples of how to modify your designs. The collet extension, used to make extra deep bowls, is also useful whenever your general woodworking requires extra deep cuts.Template material is 1/2" MDF (all templates are produced on a CNC router, ensuring perfect curves and straight lines).Oval template produces 14" wide x 22-1/2" long tray.Pie-cut template produces 16-3/4" round tray.3-1/2" long collet extension accepts 1/2" shank router bits.Bowl and Tray router bit: 1-1/4" diameter; carbide tipped; shear angle; 1/2" shank.Instructional DVD is 38 minutes long.

Rockler 2-Pc. Ogee Stile and Rail Router Bit Set - 1-5/8" Dia x 1" H x 1/2" Shank

Rockler 2-Pc. Ogee Stile and Rail Router Bit Set - 1-5/8" Dia x 1" H x 1/2" Shank
$114.99

Use these stile and rail router bits to make durable, beautifully crafted cabinet door frames. The cutters are adjustable and can be reconfigured to cut grooves of varying location and width for glass and other door panels. The bits are manufactured to exacting standards to create perfectly matched cope and stick joints.

Dewalt DW6182 Plunge Base for DW616/618 Routers

Dewalt DW6182 Plunge Base for DW616/618 Routers
$114.99

Plunge Base for DW616/618 Routers3 Year Limited WarrantyFeatures & Benefits:Adjustable, tool-free steel motor cam lock makes depth adjustment and base changes quick and solid-lockingIntegral, through-the-column dust collection collects 95% of the dust and provides superior bit visibilityPrecision machined brass bushings and case-hardened steel guide rods provide a smooth and accurate plunge strokeClear, LEXAN sub-base provides enhanced base durability, bit visibility, and accepts standard template guide bushingsRubber overmolded handles and low center of gravity design provide best-in-class comfort, balance, and controlHeavy duty, precision machined, die-cast aluminum base for durability and low tool weight

Dust Bucket Dust Collection Kit for Router Tables

Dust Bucket Dust Collection Kit for Router Tables
$110.47

Includes everything you need to capture dust from two key areas on your routing table: Router Table Dust Bucket (32321)Router Table Dual Dust Port (20225)2-1/2'' x 36'' clear Dust Hose (34203)Features:Easy-access door with magnetic catch for quick height adjustments Adjustable vent for suction control to prevent boards from stickingBucket is easy to assembleKeyhole slotted to attach to most router table topsFits most routers, including large plunge routers

Rockler Round-Edge Matched Stile and Rail Router Bit Set - 1-5/8" Dia x 1" H x 1/2" Shank

Rockler Round-Edge Matched Stile and Rail Router Bit Set - 1-5/8" Dia x 1" H x 1/2" Shank
$109.99

This matched stile and rail bit set is factory set to guarantee a perfect fitting joint every time. Features a bearing-guided design that helps to eliminate dips and ensures a smooth, burn-free cut. Slot cutter can be easily removed. 1-5/8" overall diameter x 1" cutting length x 1/2" shank. 1-1/2" shank length. 5/8" bearing. Groove is 3/8" D x 1/4"H.For an easy way to set the bit height with perfect repeatability, try our Router Bit Set-Up Jig (53803, sold separately).

Rockler Flooring Nail Slot Router Bit Set - 15/16" Dia x 3/4" H x 1/2" Shank

Rockler Flooring Nail Slot Router Bit Set - 15/16" Dia x 3/4" H x 1/2" Shank
$109.99

Whether you're just milling some boards to patch or add to an existing floor, or you want more control over the color match and strip width of a new floor, our flooring bit set is the perfect candidate. The cutters are specially designed for flooring, and feature chamfered edges along the tongue and along the bottom edge of both boards. This prevents small particles such as sand and sawdust from affecting the fit of your strips. The bevel on the bottom edge also ensures that the joints will be tight even if there is a slight hump in the sub-floor. A V-groove nail slot in the male section helps your nails set in nicely so they won't interfere with the fit.

Rockler 2-Pc. Rail/Stile Shaker Cutter Router Bit Set - 1/2" Shank

Rockler 2-Pc. Rail/Stile Shaker Cutter Router Bit Set - 1/2" Shank
$109.99

These bits cut tight-fitting cope and stick joints for Shaker style door frames. Pair the door frame with a flat 1/4" panel, or utilize our 3-pc. Shaker Raised Panel router bit set (40432, sold separately), which features a matching bevel. Bearing-guided to prevent dips and ensure a perfect fit. Sturdy 1/2" shanks and precision balancing ensure stability while routing, while the high-grade carbide provides a long cutting life.

M-Power CRB7 MK3 Multi-Function Router Base

M-Power CRB7 MK3 Multi-Function Router Base
$109.99

Realize the full potential of your router in only seconds with the easy-to-install CRB7 MK3 Multi-Function Router Base. The CRB7 MK3 arms your router with the ability to cut fully micro-adjustable dadoes, mortises, circles, and indexed grooves for faux paneling and shelving systems. In addition to that, the offset design provides excellent anti-tilt support, and includes an accessory support foot for routing narrow materials. The MK3 also boasts a large circle compass feature enabling you to rout circles from 19'' to over 50''. Increased stability in turn leads to better accuracy and finish quality. You can also add the CRB7 Edging Trim Kit (45052, sold separately) for the ability to trim solid wood edging or edging tape without having to run your router on the narrow edge of the material.Note: The CRB7 fits all routers with edge guide rod drillings, and unlike similar jigs, it requires no screws or drivers to install, just slide it on and tighten the knobs. Features: Adjustable Dadoing or Trenching with a Clamp Guide: Set your clamp guide (sold separately) once and adjust the position of the router via the CRB7 MK3's Micro AdjusterThe CRB also increases the reference surface between your router and the clamp guide, and reduces clamp guide set up timeAdjustable Mortising: Install the included mortising pins to cut "centered and off centered" mortises. Microadjust wheel allows you to precisely control the width of the mortiseAnt-Tilt Support: Traditionally, most of the router base remains unsupported when edge routing, but the CRB anti-tilt leg eliminates router tilt, especially important when routing narrow workpiecesCompass/Circle Cutter: Use the magnetic pin to rout precision circles and holes, even holes that are actually smaller than the base of the router! CRB can rout circles from 3/4'' to 8-3/4'' radius, using a 1/4'' straight bitLarge Compass/Circle Cutter: Uses a pivot hub and 25/64'' compass rods to rout precision circles and holes from 19'' to over 50'' DiameterOffset Base Plate: Increases overall router stabilityCRB also moves the pivot hand that the router toward the center of the panel, reducing the chance of burn marksAdjustable/Repeatable Beadboard, Groove Copier: The CRB provides a simple and exceptionally quick way of accurately repeating a dado or grooves for shelving systems and false panellingUse the Edging Trim Kit (45052, sold separately) to effortlessly and accurately trim hardwood and iron-on edging flush with the panelSet up with speed and ease - The CRB7 MK3’s adjustable cranked rods allow both the inter rod width and rod height to be simultaneously adjustedFitting the CRB7 MK3 to your favorite router couldn't be easier, the cranked rods allow it to be fitted to the majority of routers on the marketQuick Change: Unlike most router jigs, the CRB7 can be fitted/removed in less than 10 seconds, with no fiddly screws or cantering jigs requiredMicro Adjuster: High precision router cutter position can be attained and repeated using the knurled and indexed micro adjuster2'' Bakelite Ball Handle: Ergonomic design, comfortable to the touchIndexed Rule: Self-adhesive Imperial/Metric rule ensures fast, easy readings2-Section Anti-Tilt Leg supports and stabilizes the router when routing materials from 3/8'' to 3-1/4'' thickIncludes two pairs of different sized guide rods to fit more routers2 guide rod locking bars to assist set up and adjustmentOnboard Magnetic Pivot Pin Storage: A safe home for this essential component, easily accessible when ever neededProfessional Grade Build: Made in England, CRB is manufactured to the highest standards and features a machined, hard-anodized solid aluminum bridgeLaser cut 5mm thick acrylic baseplate and precision-turned steel and brass components2 Year Guarantee

Rockler Router Table Fence

Rockler Router Table Fence
$109.99

The core of the Rockler Router Table Fence is a precision 32'' aluminum extrusion that provides a laser-straight reference surface immune to fluctuations in humidity. Comfortable knobs make it easy to adjust the MDF fence faces for different bit sizes, and to adjust the entire fence back and forth and side to side. The top-mounted Universal T-track runs the full length of the fence, making it easy to add flip-down stops and other accessories. MDF fence faces are coated with melamine for smooth, friction-free routing, and also feature T-tracks for featherboards and stops. A transparent bit guard is included to keep your fingers safe. To add a dust port and featherboards, see our 4-Piece Router Table Accessory Kit (56764, sold separately). Extruded aluminum backer provides a stiff, straight backbone that won't shift with humidity changesTop-mounted universal T-track accepts 5/16'' T-bolts, 1/4'' T-bolts, and 1/4'' hex boltsComfortable knobs for easy, tool-free fence adjustmentsIncludes bit safety guard for safe routing

Porter-Cable 4.5 Amp 1/4'' Palm Router

Porter-Cable 4.5 Amp 1/4'' Palm Router
$109.99

One look is all it takes to see that the Porter-Cable PCE6430 trim router is a champ in the comfort department. Its narrow, lightweight housing lets you easily wield it with one hand, while the widened profile at the top prevents it from slipping downwards, encouraging a relaxed grip and less fatigue. Add to that a raft of convenient features such as the large, front-mounted spindle lock button, easy-to-operate depth adjustment ring, large cam-style locking clips, transparent base and an onboard LED light, and you have a trim router that you'll find yourself reaching for over larger routers again and again.Features: Single speed 31,000 RPM, 4.5 amp motor provides plenty of rugged powerPerfect for laminate trimming, small edge profiles and hinge routing applicationsExcellent ergonomics allow for comfortable, one-handed operationPrecision-machined, cast-aluminum fixed base for long-term durabilityExtra-large locking clips provide fast motor removal and/or course depth adjustmentClear acrylic sub base accomodates Porter-Cable style bushingsAttached depth ring enables quick, accurate bit height adjustmentsEasy-access spindle lock button allows for single-wrench bit changes.LED light and clear sub-base for maximum visibility while in operation

Plunge Base for Porter Cable 450 and 450PK Compact Routers

Plunge Base for Porter Cable 450 and 450PK Compact Routers
$104.99

Replacement/accessory Plunge Base for Porter Cable 450 and 450PK Compact Routers (#41766 and #41462). Lightweight, smooth-sliding plunge base has rubber handles, a five-step turret stop, and sliding depth-rod with micro-rod for fine adjustments.

Freud 99-520 Quadra-Cut Ogee Raised Panel Router Bit - 3-1/2" Dia x 5/8" H x 1/2" Shank

Freud 99-520 Quadra-Cut Ogee Raised Panel Router Bit - 3-1/2" Dia x 5/8" H x 1/2" Shank
$104.47

This ogee panel raiser is ideal for creating raised panels for doors and wainscoting, as well as for decorative tops, plaques and molding. Freud's revolutionary Quadra-Cut design combines two large wings that shear upward for a smooth finish, and two small wings that cut downward for an absolutely splinter- and fuzz-free edge, even on cross-grain cuts in difficult materials.Use 5/8" height is ideal for 3/4" stock.Cuts all composition materials, plywoods, hardwoods, and softwoods.Use on table-mounted portable routers.

Freud Quadra-Cut Cove Raised Panel Router Bits - 1/2" Shank

Freud Quadra-Cut Cove Raised Panel Router Bits - 1/2" Shank
$104.47

Freud's exclusive Quadra-Cut? 4 cutter design provides the smoothest cuts possible. You'll get crisp, clean edges every time, even with cross-grain cuts in difficult materials. Application: Ideal for creating raised panels for doors and paneling, as well as decorative tops, plaques and moldingRevolutionary Quadra-Cutdesign combines two small wings that cut downward to shear the top edge for a splinter-free surface, and two large wings that shear upward for a smooth finish. Use 1/2" height for 5/8" stock. Use 5/8" height for 3/4" stock. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on table-mounted portable routers.

Freud 99-027 Round Over Table Edge and Handrail Router Bit - 2-19/32" Dia x 23/32" H x 1/2" Shank

Freud 99-027 Round Over Table Edge and Handrail Router Bit - 2-19/32" Dia x 23/32" H x 1/2" Shank
$102.97

Apply an attractive edge to table tops, plaques and handrails with this versatile router bit from Freud. If used as a table edge bit, it routs a smooth, elongated radius. Set it deeper to rout a small shoulder, or shallower for a basic roundover. If used as a handrail bit, rout the handrail on both edges to put a smooth contour on the top of the rail. If desired, use our Handrail Router Bit (91708, sold separately) to rout the finger grooves on the cheeks of the handrail. With its high-grade carbide and sturdy 1/2" shank, the bit is well-equipped for heavy work, and will provide many years of quality results.Cuts all composition materials, plywoods, hardwoods, and softwoods.Use on hand-held and table-mounted portable routers.

Freud 99-861 Double Side Door Cutters Set Router Bit - 1-11/16" Dia x 9/16" H x 1/2" Shank

Freud 99-861 Double Side Door Cutters Set Router Bit - 1-11/16" Dia x 9/16" H x 1/2" Shank
$101.97

Making double-sided ogee doors has never been easier! This optional cutter for double-sided doors matches the ogee profile of Freud's 99-761 Stile and Rail Bit Set (37161, sold separately). The result affords you even more creative freedom by letting you build custom frame and panel doors with decorative edges on both sides-perfect for doors that will be visible from both sides! Two add-on cutters are included, one for the rail cutter, and one for the stile cutter. Both allow you to make double profile doors with variable thicknesses and long tenons. The cutters are machined to precisely match the Freud 99-761 rail and stile bit set.Perma-Shield coating reduces heat and pitch build up along with rustTiCo Hi-Density Carbide maximizes bit life and material finish

Pages: first pageprev page5 6 7 8 9 10 11 12 13 14next pagelast page