Pages: first pageprev page2 3 4 5 6 7 8 9 10 11next pagelast page

Freud 97-254 3-Pc. Door Router Bit - 5/8" H x 1/2" Shank

Freud 97-254 3-Pc. Door Router Bit - 5/8" H x 1/2" Shank
$183.47

Set contains Premier Adjustable Ogee Rail and Stile Bits to mill tenons of any length! Simply remove the top portion of the cutter (including bearing and spindle) to produce the front of the long tenon profile for blind tenons, through tenons or bridle joints. These precise bits work for any door 5/8" to 1-1/4" thick. Unique cutter geometry virtually eliminates tearout. Adjustable shims enable a tight fit when using plywood and also allow use with panels as thin as 7/32". High-density carbide composition and Perma-Shield coating lengthen bit life and protect against heat and pitch buildup. 1/2" shanks. Also includes a 3-1/2" diameter Quadra-Cut Ogee Raised Panel Bit.

Freud 97-250 3-Pc. Door Router Bit - 5/8" H x 1/2" Shank

Freud 97-250 3-Pc. Door Router Bit - 5/8" H x 1/2" Shank
$183.47

Set contains Premier Adjustable Ogee Rail and Stile Bits to mill tenons of any length! Simply remove the top portion of the cutter (including bearing and spindle) to produce the front of the long tenon profile for blind tenons, through tenons or bridle joints. These precise bits work for any door 5/8" to 1-1/4" thick. Unique cutter geometry virtually eliminates tearout. Adjustable shims enable a tight fit when using plywood and also allow use with panels as thin as 7/32". High-density carbide composition and Perma-Shield coating lengthen bit life and protect against heat and pitch build-up. 1/2" shanks. Also includes a 3-1/2" dia. Bevel Raised Panel Bit.

Freud 97-154 3-Pc. Door Router Bit Set - 5/8" H x 1/2" Shank

Freud 97-154 3-Pc. Door Router Bit Set - 5/8" H x 1/2" Shank
$183.47

Set contains Premier Adjustable Quarter Round Rail and Stile Bits to mill tenons of any length! Simply remove the top portion of the cutter (including bearing and spindle) to produce the front of the long tenon profile for blind tenons, through tenons or bridle joints. These precise bits work for any door 5/8" to 1-1/4" thick. Unique cutter geometry virtually eliminates tearout. Adjustable shims enable a tight fit when using plywood and also allow use with panels as thin as 7/32". High-density carbide composition and Perma-Shield coating lengthen bit life and protect against heat and pitch build-up. 1/2" shanks. Also includes a 3-1/2" dia. Ogee Raised Panel Bit.

Freud 97-150 3-Pc. Door Router Bit Set - 5/8" H x 1/2" Shank

Freud 97-150 3-Pc. Door Router Bit Set - 5/8" H x 1/2" Shank
$183.47

Set contains Premier Adjustable Quarter Round Rail and Stile Bits to mill tenons of any length! Simply remove the top portion of the cutter (including bearing and spindle) to produce the front of the long tenon profile for blind tenons, through tenons or bridle joints. These precise bits work for any door 5/8" to 1-1/4" thick. Unique cutter geometry virtually eliminates tearout. Adjustable shims enable a tight fit when using plywood and also allow use with panels from 7/32" to 1/4" thick. High-density carbide composition and Perma-Shield coating lengthen bit life and protect against heat and pitch build-up. 1/2" shanks. Also includes a 3-1/2" dia. Bevel Raised Panel Bit.

Freud 97-152 3-Pc. Door Router Bit Set - 5/8" H x 1/2" Shank

Freud 97-152 3-Pc. Door Router Bit Set - 5/8" H x 1/2" Shank
$183.47

Set contains premier adjustable quarter round rail and stile bits to mill tenons of any length! Simply remove the top portion of the cutter (including bearing and spindle) to produce the front of the long tenon profile for blind tenons, through tenons or bridle joints. These precise bits work for any door 5/8" to 1-1/4" thick. Unique cutter geometry virtually eliminates tear-out. Adjustable shims enable a tight fit when using plywood and also allow use with thick panels from 7/32" to 1/4" thick. High-density carbide composition and Perma-Shield coating lengthen bit life and protect against heat and pitch buildup. 1/2" shanks. Also includes a 3-1/2" dia. Cove Raised Panel Bit. This set can also be used with the 33180 54-760 Glass Panel Door Cutter (sold separately) allowing you to adapt your set for routing rabbets in glass panel doors.

Freud 97-252 3-Pc. Door Router Bit Set - 5/8" H x 1/2" Shank

Freud 97-252 3-Pc. Door Router Bit Set - 5/8" H x 1/2" Shank
$183.47

Set contains Premier Adjustable Ogee Rail and Stile Bits, capable of milling tenons of any length! Simply remove the top portion of the cutter (including bearing and spindle) to produce the front of the long tenon profile for blind tenons, through tenons or bridle joints. These precise bits work for any door 5/8" to 1-1/4" thick. Unique cutter geometry virtually eliminates tearout. Adjustable shims enable a tight fit when using plywood and also allow use with panels as thin as 7/32". High-density carbide composition and Perma-Shield coating lengthen bit life and protect against heat and pitch build-up. 1/2" shanks. Also includes a 3-1/2" dia. Cove Raised Panel Bit.

Freud 97-200 3-Pc. Cabinet Router Bit Set

Freud 97-200 3-Pc. Cabinet Router Bit Set
$179.99

Ogee rail-and-stile bits and a Quadra-Cut bevel raised-panel bit all have 1/2" shanks and are designed for use on 3/4" stock. Bits cut all composite materials, plywoods, hardwoods and softwoods. For use on a table-mounted portable router. Rail-and-stile bits have an overall diameter of 1-11/16", carbide height of 23/32" and overall height of 3". Raised-panel bit has an overall diameter of 3-1/2", carbide height of 5/8" and overall height of 2-1/2".

Dewalt DW618M Heavy-Duty 2-1/4 HP maximum motor HP EVS Router Motor with Soft Start

Dewalt DW618M Heavy-Duty 2-1/4 HP maximum motor HP EVS Router Motor with Soft Start
$179.99

Heavy-Duty 2-1/4 HP (maximum motor HP) EVS Router Motor with Soft Start3 Year Limited Warranty2-1/4 HP (maximum motor HP), 12 amp electronic variable speed motor provides the power to rout smoothly through the toughest hardwoodsMicro-fine depth adjustment ring provides precise depth adjustments in 1/64" incrementsAdjustable, tool-free steel motor cam lock makes depth adjustment and base changes quick and solid-lockingIncludes: 1/4" and 1/2" collets wrenchDW618M motor pack1/4" and 1/2" colletsPower cord setFeatures & Benefits:2-1/4 HP (maximum motor HP), 12.0 Amp electronic variable speed motor provides the power to rout smoothly through the toughest hardwoodsElectronic variable speed with full feedback control for constant speed under load from 8,000-24,000 rpm and soft start to reduce start-up torque for enhanced controlDust-sealed switch provides durability and long switch lifeSpindle lock to allow for one wrench bit changesHeavy-duty, precision machined, die-cast aluminum motor housing for durability and low tool weightNickel plated motor housing for a smooth, long-lasting depth adjustment

Kreg Precision Router Table Top

Kreg Precision Router Table Top
$179.00

This professionally edgebanded top provides a solid, secure, and quiet routing solution for any workshop. It features an Easy-Slide skin made from an impact resistant high-pressure laminate. The top is made from vibration- and noise-resistant MDF and is reinforced by two steel struts, which keep it from sagging over time. The bottom side of the phenolic insert plate is laser-etched with a template for easy mounting of your router. The plate includes three Level-Loc reducing rings and a unique ''ring wrench''-just turn to lock them in place and they automatically level themselves. The 1-13/16'' ring is compatible with standard guide bushings. 1'' thick MDF core with steel reinforcing strutsDurable Easy-Slide low-friction surfaceSmooth-sliding, rigid 3/8'' x 9-1/4'' x 11-3/4'' phenolic insert plateLaser-engraved target pattern on the underside of the plate ensures simple, accurate router centering and mountingThree reducing rings (1'', 1-13/16'' and 2-5/8''), including one that accepts aftermarket guide bushings, plus a ring wrenchFour Kreg Precision Insert Plate Levelers ensure accuracy and a smooth, catch-free sliding surfaceAnodized Combo-Trak miter-gauge/T-slot track makes it easy to utilize various accessories such as the miter gauges and featherboards

Freud 99-191 V Panel Router Bit Set - 1-11/64" Dia x 1-1/8" H x 1/2" Shank

Freud 99-191 V Panel Router Bit Set - 1-11/64" Dia x 1-1/8" H x 1/2" Shank
$177.47

Create your own custom V-Groove paneling from the solid wood material of your choice! Set includes spacers that allow you to produce V-groove paneling from 1/2", 3/4", or 1" thick stock. Neat 45° chamfer produces a classic lined effect, similar to beadboard, while the tongue and groove joint keeps everything precisely aligned once installed.Cuts all composition materials, plywoods, hardwoods, and softwoods.Use on table-mounted portable routers.

Freud 91-108 9-Pc. Basic Router Bit Set - 1/2" Shank

Freud 91-108 9-Pc. Basic Router Bit Set - 1/2" Shank
$176.47

Make your joinery and edge profiles look equally sharp with this 9-Piece Basic Router Bit Set from Freud. With a dovetail bit, three straight bits and a rabbeting bit, you'll have the capability of cutting a full suite of high-quality joints. Use the flush trim bit to trim any veneers, laminates or thin stock glue joints before sanding. Once your project is together, the ogee, round over and V-groove bits will help you dress it up for beautiful final results. The set includes a beautiful wall-mountable wooden case with a hinged door that keeps your bits protected and well-organized.Includes a variety of bits for joinery and decorative effects.Set comes in Freud's unique shadow box case, which hangs on the wall or mounts on the bench to keep bits handy and safe.Cuts all composition materials, plywoods, hardwoods, and softwoods.Use on hand-held and table-mounted portable routers.Features TiCo Hi-Density carbide for longer bit life and a flawless finish.Perma-SHIELD Non-stick Coating protects from heat, gumming, and corrosion.Each bit is computer-balanced and precision-ground for the smoothest possible cuts.1/2" Double Flute Straight Bit:Freud #: 12-116Overall Diameter (A): 1/2"Carbide Height (B): 1"Shank (C): 1/2"Overall Height: 2-5/8"3/8" Double Flute Straight Bit:Freud #: 12-108Overall Diameter (A): 3/8"Carbide Height (B): 1"Shank (C): 1/2"Overall Height: 2-5/8"1/2" Mortising Bit:Freud #: 16-110Overall Diameter (A): 1/2"Carbide Height (B): 1/2"Shank (C): 1/2"Overall Height: 2-3/8"1/2" Dovetail Bit:Freud #: 22-112Overall Diameter (A): 1/2"Carbide Height (B): 1/2"Shank (C): 1/2"Overall Height: 2-1/4"Rabbeting Bit:Freud #: 32-102Overall Diameter (A): 1-1/4"Bearing Diameter: 1/2"Carbide Height (B): 1/2"Shank (C): 1/2"Overall Height: 2-1/4"Rounding Over Bit:Freud #: 34-120Overall Diameter (A): 1"Bearing Diameter: 1/2"Carbide Height (B): 1/2"Shank (C): 1/2"Overall Height: 2-1/2"Roman Ogee Bit:Freud #: 38-106Overall Diameter (A): 1-3/8"Bearing Diameter: 3/8"Carbide Height (B): 1/2"Shank (C): 1/2"Overall Height: 2-3/8"Bearing Flush Trim Bit:Freud #: 42-109Overall Diameter (A): 1/2"Bearing Diameter: 1/2"Carbide Height (B): 1/2"Shank (C): 1/2"Overall Height: 2-7/8"V" Grooving Bit:Freud #: 20-108Overall Diameter (A): 3/4"Carbide Height (B): 1/2"Shank (C): 1/2"Overall Height: 2-1/4"

Leigh R9 Plus Joinery System

Leigh R9 Plus Joinery System
$169.00

Create through dovetails and finger joints on boards of any width with the Leigh R9 Plus Joinery System! The R9 Plus helps you do it quickly and with precision. And with dependable Leigh quality, you know you'll get pins and tails that fit perfectly every time! Features a template designed to be used with a stand alone router (bench mode) or on your router table.Note: Leigh R9 Plus Joinery System mounts to a shop made beam (not included) in order for the user to operate properly.Technical Details:Cut through dovetails on unlimited board widths on board thickness up to 13/16"Three dovetail pin widths - 3/8", 7/16", and 1/2"Two dovetail joint pitches - 1-1/2" and 3/4"Cut Box Joints on any board thickness up to 1" in three different sizes (3/16", 3/8", and 3/4")No jig adjustmentsJoint fit is controlled by patented eBushWorks on your router table or with a standalone routerAdjustable width clampingReplaceable backer board eliminates tear out

Bosch 2-1/4 HP VS Router

Bosch 2-1/4 HP VS Router
$169.00

Variable Speed 12 amp motor provides soft start maintains speed under load and provides overload protection.Electronic variable speed with 8,000-25,000 RPM range for max. versatility. Precision centering system for accurate cuts. Self extracting collet system for less run out. Includes 1/4" and 1/2" collets.

Rockler Complete Dovetail Jig

Rockler Complete Dovetail Jig
$164.99

Cutting beautiful through and half-blind dovetails is fast and easy with our new and improved dovetail jig! Rockler's exclusive one-piece stop gives you the perfect offset every time for dead-on dovetailing accuracy. And our new preset template guide allows for quick initial setup for 1/2" to 3/4" thick stock. Jig will cut half-blind dovetailed joints from 1/2" to 1-1/8" thick and full through dovetails from 3/8" to 3/4" thick. Accommodates stock up to 11" wide. Requires router with 1/2" collet.Requires a router base plate that accepts template guide bushings. 8mm diameter bits are 25% larger than typical 1/4" bits, reduce chatter and fit all existing Rockler dovetail jigs.Preset template and fence locations clearly marked for standard thickness stock.Clamping bars include abrasive surface to grip stock and prevent slipping.Depth gauge on template for setting dovetail bit height for half-blind joints.Complete Dovetail Jig Includes:Two durable phenolic templatesThree 8mm shank carbide-tipped router bits (1/2" x 14° dovetail, 1/2" x 8° dovetail, 5/16" straight)1/2" to 8mm collet adapter7/16" guide bushing fits most routersDetailed eight-page instruction bookletQuick reference guide for standard joints

Dewalt DW616K Heavy-Duty 1-3/4 HP maximum motor HP Fixed Base Router Kit

Dewalt DW616K Heavy-Duty 1-3/4 HP maximum motor HP Fixed Base Router Kit
$164.99

Heavy-Duty 1-3/4 HP (maximum motor HP) Fixed Base Router Kit3 Year Limited Warranty1-3/4 HP (maximum motor HP), 11 amp motor provides the power to rout smoothly through the toughest hardwoodsMicro-fine depth adjustment ring provides precise depth adjustments in 1/64" incrementsAdjustable, tool-free steel motor cam lock makes depth adjustment and base changes quick and solid-lockingIncludes:DW616M motor packDW6184 fixed base1/4" and 1/2" colletssub-base concentricity gauge2 wrenchesheavy-duty kit boxFeatures & Benefits:1-3/4 HP (maximum motor HP), 11.0 Amp motor provides the power to rout smoothly through the toughest hardwoodsMicro-fine depth adjustment ring provides precise depth adjustments in 1/64" increments and adjusts vertically for a constant switch/cordset locationAdjustable, tool-free steel motor cam lock makes depth adjustment and base changes quick and solid-lockingQuick release motor latches for fast and easy motor pack removal for bit and base changesDetachable cordset offers cordset serviceability and the ability to use the same motor pack for all basesSub-base concentricity gauge included to ensure bit concentricity for best-in-class accuracy

Incra Miter 1000SE with Telescoping Fence

Incra Miter 1000SE with Telescoping Fence
$159.99

Achieve mitering accuracy that you never thought possible! Special Edition miter gauge comes with sturdy telescoping fence and dual-arm Flip Shop Stop for accurate miter cuts on the table saw or router table.Precision angle indexing teeth are laser cut in solid steel to lock in 41 positive angle stops in 5° increments over a full 180° range, with special stops at 22-1/2° and 67-1/2°.Stainless steel vernier cursor delivers an incredible 1/10° resolution between fixed steps.Get perfect, repeatable accuracy every time - whether making basic 90° cut-offs, simple picture frames, complex compound miters, or a 20-sided object.Incra precision allows you to produce perfect, gap-free hairline glue joints on the mitered corners of any multi-sided object without trial-and-error setups.Sturdy Special Edition Incra-Lock fence telescopes from 18" to a full 31" length.Flip Shop Stop has patented saw tooth rack system that instantly controls the length of your cut. Dual flip arms, equipped with three sliding stop rods, operate independently or in tandem for one, two or three simultaneious stop positioner setups. Made of solid aluminum with hardened anodized surface.Miter bar has six expansion disks to adjust both sides of the bar for zero side play and anti-friction travel on all table saws and router tables with standard 3/8" x 3/4" miter slots.Interlocking tongue-and-groove cooperation between the flip arms and surface of the fence insures that the sharp end of a mitered board won't wedge itself between the fence and the stop.

Porter Cable 690LR Router

Porter Cable 690LR Router
$159.99

Porter Cable promotes power and efficiency with this 690LR Fixed-Base Router. Featuring a powerful 1-3/4 horsepower motor to generate 27,500 RPM for precise cutting. Stressing comfort and ease of use, this unit has two ergonomic handles allowing you to comfortably control every move. Router includes collets to accept both 1/4" and 1/2" shank bits.11 Amp motor producing 1-3/4 Peak HP27,500 rpm single speed motorCam lock lever enables simple coarse height adjustments and motor release (fixed base)Micrometer depth adjustor accurate to 1/128"Dust-sealed switch and sealed ball bearing construction enhance tool durabilityPrecision machined aluminum motor housing and baseAuto-release collet system allows for easy bit removal after useCollets included to accept 1/4" and 1/2" shank bitsUnder table stop prevents motor from inadvertently rotating out of baseOvermolded grips for greater comfort in extended useProduct Specifications:Power: 120 VAC, 25-60 HzHorsepower: 1-3/4 HPAmps: 11 AMotor Diameter: 3-1/2"No Load Speed: 27,500 RPMCollets: 1/4" and 1/2"Base: 5-3/4" RoundLength: 12"Width: 5-1/2"Height: 8-5/8"Weight: 8 lbs.

Rockler 24'' x 36'' Shop Stand

Rockler 24'' x 36'' Shop Stand
$159.99

The perfect steel stand for your CNC Shark, workbench, assembly table or machining station. Legs and stretchers are pre-drilled to easily add sides, bottom and hinged doors for a built-in cabinet and have square holes for easy assembly with carriage bolts. Legs are heavy-duty 1/8" steel, with adjustable levelers for various height settings. Top stretchers can be mounted flush with top or 4" down to add drawer or vise. All parts coated with durable black sand paint.Technical Details:Steel base measures 24"W x 36"L x 32"H.Perfect for a CNC table, work station, workbench, assembly table, or tool stand!Use with your CNC router, grinder, sander, router table, scroll saw, chop saw and more!All legs and stretchers are pre-drilled to easily add sides, bottom and hinged doors for a built-in cabinet, and have square holes for easy assembly with carriage bolts.Legs are heavy-duty 1/8" steel to support any shop application.Includes 4" x 1/2" heavy-duty adjustable levelers for various height settings.Includes four 32" legs and all mounting hardware (carriage bolts and nuts).Top stretchers can be mounted flush with top or 4" down to add drawer or woodworking vice.All parts coated with durable black sand paint.

Pages: first pageprev page2 3 4 5 6 7 8 9 10 11next pagelast page