Pages: first pageprev page2 3 4 5 6 7

Rockler Miter Slot Hardware Kit

Rockler Miter Slot Hardware Kit
$7.99

Make your own jigs and hold-downs!Excellent for attaching featherboards, hold-downs and special jigs to your table saw, router table, disc sander or any other tool with a standard 3/4" wide x 3/8" deep miter gauge slot.Hardware kit allows you to make your own jigs and hold-downs.4-3/4" long slot bars fit both square and T-shaped miter gauge slots, and expand in the slot as you tighten the knob.Kit includes two slot bars, knobs with screws, and washers.

Triton TCMBSFPK Sanding Belts for Palm Belt Sander, 3-Pack

Triton TCMBSFPK Sanding Belts for Palm Belt Sander, 3-Pack
$7.99

This is a pack of three sanding belts for the Triton TCMBS Palm Belt Sander (57819, sold separately). Includes 80-, 100- and 120-grit belts. Size is 64 x 406mm (2-1/2'' x 16'').

Sandpaper Caddy Downloadable Plan

Sandpaper Caddy Downloadable Plan
$7.95

If finding a specific grit sandpaper in your sandpaper drawer is a frustrating chore, here's an easy way to bring some order to the chaos. A reader submitted this handy caddy design, which is basically an embellishment of a simple alignment block for installing orbital sanding disks on a sander. By making several of these alignment blocks for each of the grits you use, all you need is a case to store them in. Suddenly that drawer is much less cluttered!

Shop-built Disc Sander Downloadable Plan

Shop-built Disc Sander Downloadable Plan
$7.95

A dedicated disc sander is a useful addition to any shop, but it's another tool expense that often falls down the list of "must haves" until it never gets purchased. What you may not know is that an ordinary bench grinder is easy to convert into a disc sander by simply replacing a grinding wheel with a plywood disk and a spacer (see page 46). Once you've made that switch, your new "sander" will need a sturdy platform and sanding table - the genesis for this project. If you're the resourceful sort or feed your woodworking hobby from a lean budget, this Shop-built Disc Sander should have instant curb appeal!

Split-Mortise Bench Downloadable Plan

Split-Mortise Bench Downloadable Plan
$7.95

Timber framed joinery in the author's 100-year-old Minnesota smokehouse provided the inspiration for making the split-cut mortises on this bench. The rest of the styling is straightforward and easy to reproduce with a band saw and drum sander. Then throw in a dash of contrasting wood to add a bit of flair to this sturdy and useful project

Deluxe Drum Sander Downloadable Plan

Deluxe Drum Sander Downloadable Plan
$7.95

If you want to build a better mousetrap, the best starting point is a list of the limitations of your old one. As far as drum sanding on a drill press goes, most sanding jigs lack dust control, and the drums tend to clog too soon. This jig addresses both problems: It has a built-in dust collection port, and the drum can be raised or lowered through the tabletop, so you can work with a new, unclogged part of the sleeve as often as needed.

Detail Sander - Belt Holders

Detail Sander - Belt Holders
$5.99

Use for moldings, turnings, carvings and models. Made of blue plastic. Spring loaded top end for easy changing of sanding belts. Spring tension keeps belt firmly on holder. Belt can be rotated to "Free" paper when needed. A simple, sleek, sanding tool developed for hobbyists, craftsmen, woodworkers, machinists and anyone who has a need to sand unreachable or finely detailed surfaces.

80 Grit 2-1/2"X 14" Sanding Belt, 2 Per Pack

80 Grit 2-1/2"X 14" Sanding Belt, 2 Per Pack
$5.49

Replacement 80-grit sanding belts for the Porter-Cable 371K Compact Belt Sander (27365, sold separately). Two 2-1/2" x 14" belts per pack.

60 Grit 2-1/2"X 14" Sanding Belt, 2 Per Pack

60 Grit 2-1/2"X 14" Sanding Belt, 2 Per Pack
$5.49

Replacement 60-grit sanding belts for the Porter-Cable 371K Compact Belt Sander (27365, sold separately). Two 2-1/2" x 14" belts per pack.

180 Grit 2-1/2"X 14" Sanding Belt, 2 Per Pack

180 Grit 2-1/2"X 14" Sanding Belt, 2 Per Pack
$5.49

Replacement 180-grit sanding belts for the Porter-Cable 371K Compact Belt Sander (27365, sold separately). Two 2-1/2" x 14" belts per pack.

100 Grit 2-1/2"X 14" Sanding Belt, 2 Per Pack

100 Grit 2-1/2"X 14" Sanding Belt, 2 Per Pack
$5.49

Replacement 100-grit sanding belts for the Porter-Cable 371K Compact Belt Sander (27365, sold separately). Two 2-1/2" x 14" belts per pack.

120 Grit 2-1/2"X 14" Sanding Belt, 2 Per Pack

120 Grit 2-1/2"X 14" Sanding Belt, 2 Per Pack
$5.49

Replacement 120-grit sanding belts for the Porter-Cable 371K Compact Belt Sander (27365, sold separately). Two 2-1/2" x 14" belts per pack.

Oscillating Spindle Sander Replacement Sleeves - 3/4" Diameter

Oscillating Spindle Sander Replacement Sleeves - 3/4" Diameter
$4.99

Replacement sanding sleeves for your oscillating spindle sander. Fits most brand-name spindle sanders with a 4-1/2'' length: Ryobi, Jet, Delta, Grizzly and more. Long-lasting aluminum oxide abrasive. Sold in packs of three. Choose from a range of available grits.

Oscillating Spindle Sander Replacement Sleeves - 1" Diameter

Oscillating Spindle Sander Replacement Sleeves - 1" Diameter
$4.99

Replacement sanding sleeves for your oscillating spindle sander. Fits most brand-name spindle sanders with a 4-1/2'' length: Ryobi, Jet, Delta, Grizzly and more. Long-lasting aluminum oxide abrasive. Sold in packs of three. Choose from a range of available grits.

Oscillating Spindle Sander Replacement Sleeves - 1-1/2" Diameter

Oscillating Spindle Sander Replacement Sleeves - 1-1/2" Diameter
$4.99

Replacement sanding sleeves for your oscillating spindle sander. Fits most brand-name spindle sanders with a 4-1/2'' length: Ryobi, Jet, Delta, Grizzly and more. Long-lasting aluminum oxide abrasive. Sold in packs of three. Choose from a range of available grits.

Replacement Belts for Detail Sander

Replacement Belts for Detail Sander
$4.99

Replacement sanding belts for Detail Sander - Belt Holder.

Shop-Built Sanding Blocks Downloadable Plan

Shop-Built Sanding Blocks Downloadable Plan
$1.00

These sanding blocks are a low-cost alternative to the store-bought variety. The step-by-step technique shown yields three separate blocks - one each for coarse, medium and fine sandpaper. The blocks are designed to use either the cloth-backed paper from 3 inch wide belt sanders or 3 inch wide roll sandpaper, which is more flexible and longer lasting than standard sandpaper.

Pages: first pageprev page2 3 4 5 6 7