Pages: first pageprev page3 4 5 6 7 8 9 10 11 12next pagelast page

Bench Dog Cast Iron Router Table for Table Saw, Pro Fence and Plate

Bench Dog Cast Iron Router Table for Table Saw, Pro Fence and Plate
$349.99

Expand your table saw's versatility by adding this industrial grade router table in place of the extension wing. Perfect for shops where space is tight, ProMAX includes a cast-iron top, Bench Dog's 28'' ProFence, a miter gauge track that adjusts for a no-slop fit, and a solid aluminum insert plate that is pre-drilled to fit your specific router. If workspace is an issue, the ProMAX has you covered. Its dual fence slot configuration lets you rotate the fence and work from either side of the table to maximize surface area. Plus, with a third miter slot at its disposal, your table saw becomes perfectly equipped to handle crosscut sleds.To choose a pre-drilled plate, find your router below. If it's not listed, choose from two non-drilled plates-one with a 4'' insert ring, and the other a 4-3/8'' insert ring-and drill the plate to fit your router.Plate A routers: Makita 1100; Milwaukee 5615-5624; DeWalt 616-618; Bosch MRC23 Series, 1617-1618; Ridgid 2930 Combo Kit; Hitachi M12VC (fixed and kit); Porter-Cable 690, 890, 7529, 97529 and 8529. Note: Current models of the Porter-Cable 892 require at least two screws to be 1/2" long versus 5/8".Plate B routers: DeWalt DW621 and DW621K; Craftsman Standard; Freud FT 1700E and 1702VCEKPlate C routers: Porter-Cable 7518, 7519, 7538 and 7539; Milwaukee 5625-20; Triton TRA001 and MOF001Plate D routers: Bosch 1619-1619EV; Freud FT2000; DeWalt 625Note: ProMAX cannot be installed as a left extension replacement on left tilt "cabinet" grade table saws because the table saw's motor protrudes to the left. Nor can ProMAX be installed as a right extension replacement on right tilt "cabinet" grade table saws for the same reason. Mounting ProMAX to the far right will avoid the protruding motors, however, ProMAX must be supported with two steel rails that also support your T-square style rip fence and legs.

DeWALT DW716 Heavy-Duty 12'' (305mm) Double-Bevel Compound Miter Saw

DeWALT DW716 Heavy-Duty 12'' (305mm) Double-Bevel Compound Miter Saw
$349.99

The DW716 Heavy-Duty 12" (305mm) Double-Bevel Compound Miter Saw offers power, precision, durability and versatility.Features:15.0 Amp, 3,800 rpm motor delivers extended power and durabilityAdjustable stainless steel miter detent plate with 11 positive stops ensures repeatable accuracyTall sliding fences support crown molding up to 6-5/8" nested and base molding up to 6-1/2" vertically against the fence while easily sliding out of the way for bevel cutsDouble-bevel design allows saw to bevel left and right 0° - 48° with positive stops at 0°, 33.9°, 45° and 48° both left and right allowing user to flip the saw not the materialExclusive back fence design delivers ability to cut 2 x 10 dimensional lumber at 90° and 2 x 8 at 45°

Bosch T4B Gravity-Rise Miter Saw Stand

Bosch T4B Gravity-Rise Miter Saw Stand
$329.99

Bosch's T4B folds up quickly and effortlessly into a convenient, compact dolly that can rolled onto your truck bed for transport or tucked into a corner of your shop for storage. There is no need to remove the saw from the stand when folding it up-check out the video to see its ingenious scissoring mechanism in action. Once unfolded, the infeed and outfeed supports extend to hold material up to 18' in length. Integral material stops pull up to provide precise, repeatable cuts-to bypass them, just push them back flush with the supports. Rugged 8'' diameter tires make it easy to navigate stairs and uneven jobsite terrain, while tool-free latches make it easy to remove and reinstall your miter saw if necessary. Integrated expandable infeed and outfeed tables support up to 18 feet of materialAdjustable feet provide stability on uneven surfacesOutfeed is adjustable up to 12''Universal Mounting System is compatible with all major saw brandsRapid-Release mounting system lets you remove and reinstall miter saw with just two latchesIntegrated 8'' rubber wheels for easy transport from jobsite to jobsite

Incra Mast-R-Lift II Designed for Rockler Tables

Incra Mast-R-Lift II Designed for Rockler Tables
$329.99

Raise and lower your router without having to remove it from your table with the Incra Mast-R-Lift II Router Adjustment System! This convenient and simple cam router adjustment system lets you quickly make precise 0.001" bit height adjustments from above. Simply use the included lift crank for absolute precision with the naked eye. Features five sealed ball bearings on the lift screw and cam lock, giving you super-smooth operation with the slightest of effort. Includes five steel reducing rings (3/8", 1", 1-5/8", 2-5/8", and 3-5/8") for instant ring changes. And all five are magnetic for a fast, easy, and perfect ring fit.Compatible routers: Bosch 1617EVS, 1618, DeWalt DW610 and DW618, Porter Cable 7518, 690-699 series, and 890 series, Craftsman 17543, 17540, 28190, Hitachi M12VC, KM12VC, Milwaukee 5625, 5626, 5615, 5616, 5619 and Rigid R29302.Compatible router tables: 8-1/4" x 11-3/4" x 3/8" plate size is designed specifically to work with Rockler router tables. It also is compatible with the Bench Dog ProMaxRT Cast-Iron Router Table, the ProMAX Cast-Iron Router Table Extension for Table Saws and the ProTop Contractor Portable Router Table if the snugger bar is removed from the underside of the lift. Note: Does not fit standard Incra Router Tables.

Table Saw Fence Systems

Table Saw Fence Systems
$329.99

Being able to cut materials safely and precisely on your table saw is essential for fast and accurate Woodworking.COMPARE PERFORMANCE & PRICE WITH ANY FENCE!Being able to cut materials safely and precisely on your table saw is essential for fast and accurate Woodworking. Unless saw fences are well designed they make cutting a chore instead of pleasure, resulting in poor quality and inaccurate cuts.Most Saw Fence Systems...Do not lock parallel to saw bladeDo not have accurate measuring scalesHave Fence Bars that are too shortDo not have adequate width ripping capacityRequire frequent re-alignmentLack safety devicesAre unable to be finely adjustedThe Vega Saw Fence Systems solve all of these problems (and more!) to assure Accurate and reliable cuts combined with smooth, precise motion.UTILITY MODEL 26 or 50 Designed for contractors saws, smaller cabinet saws, and 10" saws that don't receive extremely heavy use, the Utility Model Fence is simply a small version of the very successful Professional Model. With all the great features of the Pro Model (fast installation, super precision, micro adjustments and more), the Utility Fence will upgrade your saw to a very precise cutting machine at a very reasonable price.The Utility Model Vega Saw Fence System is available with 26" or 50" rip capacity to the right of the blade and 8" to the left.

Rockler Bench Dog ProMAX Cast Router Table without Plate (40-102)

Rockler Bench Dog ProMAX Cast Router Table without Plate (40-102)
$329.99

Expand your table saw's versatility by adding this industrial grade router table in place of the extension wing. Perfect for shops where space is tight, ProMAX includes a cast-iron top, Bench Dog's 28" ProFence, a miter gauge track that adjusts for a no-slop fit. If workspace is an issue, the ProMAX has you covered. Its dual fence slot configuration lets you rotate the fence and work from either side of the table to maximize surface area. Plus, with a third miter slot at its disposal, your table saw becomes perfectly equipped to handle crosscut sleds. Accepts 8-1/4" x 11-3/4" router table plates.Note: ProMAX cannot be installed as a left extension replacement on left tilt "cabinet" grade table saws because the table saw's motor protrudes to the left. Nor can ProMAX be installed as a right extension replacement on right tilt "cabinet" grade table saws for the same reason. Mounting ProMAX to the far right will avoid the protruding motors, however, ProMAX must be supported with two steel rails that also support your T-square style rip fence and legs.

SawStop Table Saw Industrial Mobile Base w/Professional PCS Conversion Kit

SawStop Table Saw Industrial Mobile Base w/Professional PCS Conversion Kit
$328.00

For woodworkers using a Sawstop PCS Professional Cabinet Saws (sold separately), this mobile base makes moving the saw an absolute breeze, without compromising stability. Give the foot pedal three quick pumps, and the saw is lifted onto four sturdy, rotating casters. A light press on the release lowers the saw so that it rests firmly on the ground, not the casters, ensuring excellent stability while sawing.NOTE: No International shipping available on SawStop items. SawStop items can only be shipped within the Continental United States. SawStop, the SawStop blade logo, and the configurations of SawStop products are either registered trademarks or trademarks of SawStop, LLC and are used with permission.

EZSmart Super Smart Routing Kit With EZSmart 54'' Guide Rail Extrusion

EZSmart Super Smart Routing Kit With EZSmart 54'' Guide Rail Extrusion
$304.98

When used on your EZSmart Guide Rail, the Super Smart Routing Kit lets you make perfectly straight cuts along two axes-X and Y-and is also adjustable along the vertical Z axis. Cut straight, uniform fluted columns, long, clean dado cuts, precise sliding dovetails, repeatable mortise and tenon joints, even sweeping arcs, all while securely straddling your precision guide rail. The Super Smart Routing Kit guides your router parallel to the track (the X-axis) and can accept optional limit stops for repeat work. The same applies for work perpendicular to the track (the Y-axis), where the Routing Kit employs it's own section of track to guide the router. The height of the router (Z-axis) is also adjustable, enabling the operator to rout in multiple planes. Made in USA. Unique track width adjustment allows this tool to work with multiple track saw systems!Now compatible with Makita Track Saw SystemsRouter and EZ Guide Rail are sold separately.Control the router as you move in any axis, along with precision, versatility, and safety in a new patented designCut flutes, rabbets, dados, and mortises with smooth-sliding ease

Incra Miter 5000 Sled

Incra Miter 5000 Sled
$299.99

The ultimate miter cutting workstation for the table saw!Three-panel miter sled with patented Incra incremental angle control delivers perfect, repeatable accuracy.Includes 36"-64" telescoping miter fence and dual flip stop.With 364 precision indexed angle stops over +/-90° to produce perfect, gap-free miter joints on any multi-sided object.Will crosscut a 25" W board with full control on a standard 10" table saw.Steel GlideLOCK miter bar has 10 width adjustment points for zero side play and anti-friction travel.Integral hold-down clamping system locks workpiece onto the sled for maxium accuracy and the cleanest cuts possible.Renewable right panel provides zero-clearance tear-out control and cut-off support on both sides of the blade.Two aluminum T-tracks are embedded in the MDF panel top to secure hold-down clamp and provide rigid support for the fence.

Dewalt DC330K Heavy-Duty XRP 18V Cordless Jig Saw Kit with Keyless Blade Change

Dewalt DC330K Heavy-Duty XRP 18V Cordless Jig Saw Kit with Keyless Blade Change
$299.99

Heavy-Duty XRP 18V Cordless Jig Saw Kit with Keyless Blade Change Features: All-metal lever-action keyless blade change allows for quick and easy blade changesAll-metal keyless shoe bevel with detents at O, 15, 30 and 45 degrees provides versatility for easy bevel cutting4-Position orbital action for control of cut quality and speedVariable speed 0-3,000 SPM for versatility in a multitude of materials and applicationsXRP battery provides long run-time & battery life

Jet 10'' Compound Miter Saw

Jet 10'' Compound Miter Saw
$299.99

The 10" compound miter saw from JET B3NCH is the right saw at home or on the job. This versatile saw comes standard with the Innovative Green XACTA Laser, a high-performance laser system exclusively from JET that projects an accurate, high-visibility guide line for precision cuts, even outdoors. Add to that the powerful 15-amp, 4800 RPM motor, comfortable rubber grip handles, and upfront controls and you have a saw that is as powerful as it is precise.Features:Dual rubber-grip carrying handles allow for convenient portabilityDie-cast aluminum design is durable and lightweight for easy transportVersatile base can mount to a stand or work benchHold-down clamp tightens securely to the work piece to ensure an accurate cutOversized ergonomic knobs provide ease of use and maximum controlErgonomic D-shaped over-molded handle for maximum control during cutting applicationsQuick cam miter lock conveniently adjusts and stops at 9 detents: 0°, 15°, 22.5°, 31.6°, and 45° left and rightSheet metal extension wings provide added work piece supportEasy-slide fence extends further to support the work piece

Triton TTS1400 Plunge-Cut Track Saw

Triton TTS1400 Plunge-Cut Track Saw
$299.99

Triton's TTS1400 Track Saw is a compact, versatile cutting machine that can quickly dimension both sheet goods and solid stock. When used with the TTSTP Track Pack (56987, sold separately), it provides smooth, straight cuts with almost no chipping on either face of the sheet, with the ability to cuts bevels of up to 48°. The cut quality rivals and even beats that of a high-quality cabinet saw. The blade housing features a flat design that allows you to work right up against a wall or other obstacle. Plunging capability lets you start and stop cuts in the middle of a sheet, while the plunge lock provides enhanced safety. The easily accessible shaftlock provides fast, convenient blade-changes. Variable speed with soft start and constant speed, soft-grip handles and on-board tool storage round out an already well-designed track saw. Features:Mode selector for quick change between free plunge, scribe, and blade change modesScribe mode eliminates splintering and tear-outEasy change carbon brushes to further extend the product life-spanPrecision bevel cut adjustment of bevel angle from 0-48ºDual bevel quadrants provide stability for precision cuttingVariable speed, soft start and constant speed electronics optimised for required cutting conditions for every materialDual alignment cams fine tune the fit between the saw and track for exact cutsAnti-kickback safety feature prevents the saw from jolting when performing plunge cutsGuide rail track lock adds stability when performing bevel cutsPrecise cutting depth adjustment can be set to a maximum of 54mm / 2-1/8''Width of cut indicators for exact positioning of blade on the work pieceFast blade replacement easily accessed through the blade guardHighly efficient dust extraction with universal vacuum system adaptor and 360° outletBlade-change mode and power switch lock-out for easy blade changesPlunge lock secures the blade inside the guard when not in useNon-slip rubber over-molded grip offers increased support, safety and control

EZSmart Multiform Master Table

EZSmart Multiform Master Table
$299.99

To make cutting with your track saw easier, more comfortable and more versatile, EZSmart offers the Multiform Master Table, a portable, adaptable work table that can be extended to support full 4' x 8' sheet stock while you cut. It can work with almost any track saw system, including the EZSmart Guide Rail (e.g. 50438, sold separately). Add sacrificial wood pieces (not included) to the crossbars for the ability to rip or crosscut in any direction. The sacrificial pieces run on plastic extrusions that slide out to expand the holding capacity of your table. The table can also be quickly disassembled for easy transport or storage. Made in USA. For even more ease and versatility, check out the EZSmart Bridge Kit (53638, sold separately), which raises and lowers your guide rail with ease and precision. The Bridge Kit slides directly into the extrusions in the end of the table. Works with numerous track saw systems or with your own straight edge systemExpands to support 4' x 8' sheet goodsUnique sliding leg system enables you to adjust the footprint of the table from 46'' long to as little as 15'' longIncludes four sliding crossrails that can be positioned anywhere along the length of the tableIncludes (4) 24'' and (4) 12'' plastic extrusions that accept sacrificial wood blocks and can be slid out for an expanded work surface up to 68''W x 68''LCross rails and side rails accomodate any of the EZSmart clamps (sold separately)Compatible with all EZSmart extrusions and toolsIndustrial-quality aluminum construction is built to lastAssembled dimensions are 24''W x 48''L x 34''H

Rockler T-Track Table Top 1-1/8'' Thick

Rockler T-Track Table Top 1-1/8'' Thick
$249.99

Considering the wide variety of T-Track accessories available, the utility of the Rockler T-Track Table Top is virtually limitless. Clamp objects at the edge of the table, in the center of the table and anywhere in between for fast, stable sawing, sanding, routing or assembly. Use it with any of our many T-Track Hold Downs, or with our Bench Cookie Work Grippers and the Bench Cookie T-Track Risers (46311). You can also use it with toggle clamps mounted on our Toggle Clamp Mounting Plates (24872). The spacious top measures 28" x 40", larger than most comparable tables. Mount it on a shop-built base, or on our 24"W x 36"L ShopStand (48089, sold separately). Technical Details: Shop Stand (#48089 - Sold Separately) Steel base measures 24"W x 36"L x 32"H.Legs include 4" x 1/2" heavy-duty adjustable levelers for various height settings.

Bosch GTA3800 Folding Leg Miter Saw Stand

Bosch GTA3800 Folding Leg Miter Saw Stand
$239.99

The Bosch GTA3800 folding leg miter saw stand is compact, lightweight and strong enough to handle a 12'' miter saw. Once your miter saw is installed, the Rapid-Release mounting system lets you remove and reinstall it with just two latches. Smooth infeed and outfeed rollers are adjustable in height to match the height of your miter saw and feature integral retractable stops for precise, repetitive cuts. The dual sliding rails extend to support material up to 16' long, and retract for compact storage and transport. Features an adjustable leveling foot for working on uneven surfaces. Equipped with transport wheels for easily moving the stand from location to location without removing the saw. Rapid-Release Universal Tool Mounts fits most miter saws and allows you to remove the saw from the stand without toolsRubber feet for a secure, no-mar gripAdjustable roller material supports with repetitive stops Move workpiece left or right quickly and easily; adjusts to be level with the table; quick accurate cuts when repetitive cuttingTransport Wheels Easily move stand from location to location without removing sawOne-handed Carry Handle with Wrench Storage Carry stand quickly and easily one-handed with saw removed for storage or work up stairsDual Sliding Rails Expand for to support material up to 16 ft; Retract for compact storageAdjustable Leveling Foot For work on uneven surfacesLightweight & Durable Folding Leg All-aluminum construction for jobsite performance and compact transport or storage

EZSmart B300 Bridge Kit

EZSmart B300 Bridge Kit
$229.99

With the EZSmart B300 Bridge Kit, loading and offloading materials for cutting with your track saw system is easier than ever. Simply slide your material under your guide rail (sold separately), then pull the lever to lower the rail onto your material. When the cut is finished, push the lever to raise the guide rail so you can remove the piece. There is no need to remove your saw, and no need to move an unwieldy guide rail around or stand it against the wall as you load a new piece. The bridge also applies pressure so no clamps are needed to secure your work. The B300 Bridge Kit can be used on a DIY workbench or with the EZSmart Multiform Master Table (50791, sold separately). Made in USA. Use to mount your EZSmart, Festool, Makita, or DeWalt guide rail to any workbenchEasily raise or lower the guide rail with one easy motionOnce lowered, the guide rail holds the material securely in place for fast, safe cuttingBridge has the capacity to cut anything from the thinnest plywood to timbers up to 5'' thickHeavy duty construction for smooth operation and long life

Dremel 4200-8/64 Corded Rotary Tool Kit, 75-Piece Platinum Edition

Dremel 4200-8/64 Corded Rotary Tool Kit, 75-Piece Platinum Edition
$219.99

The Dremel 4200-8/64 Platinum Edition Tool Kit with the EZ Change tool-free chuck, offers the highest value and most versatility of all Dremel rotary tool kits. The 4200 accepts all existing Dremel accessories and attachments, and comes standard with 8 attachments for everything from a Flex-Shaft for detail work to a Garden Tool Sharpener that can even sharpen your lawn mower blades. Add to that 64 sanding, cutting and grinding accessories and a deluxe storage case with metal latches, reinforced corners and a foam-lined drawer with stay-closed glide system, and you have an incredible value. The 4200 features electronic feedback circuitry that maintains consistent torque at all speed settings. It also features a slim, ergonomic body with a 360° grip zone for optimum control in any gripping position.Features:EZ Change mechanism allows the fastest and easiest accessory change of any rotary tool.EZ Lock and EZ Drum systems complete the tool-free accessory change experience.Includes 8 attachments and 64 genuine Dremel accessories.High-performance motor with variable speed and electronic feedback for consistent speed under load.Separate on/off switch and speed control dial let you save your speed setting when the tool is turned off.Can be used with all Dremel attachments and accessories.Cool-running ball bearing construction for smooth and quiet operation.Replaceable motor brushes extend tool life.Two year warranty.Attachment Functions:225 Flex Shaft allows fine, detailed work in tight spaces.A550 Shield attachment redirects debris and sparks while cutting, grinding, sanding, and polishing.A577 Detailer's Grip attachment provides enhanced grip and comfort.678 Circle Cutter/Straight Edge Guide helps you cut perfect circles and straight lines.575 Right Angle attachment allows you to reach into the tightest spaces.A576 Sanding/Grinding Guide attachment provides increased control while sanding and grinding.565 Cutting Guide attachment turns your rotary tool into a rotary saw.679 Garden tool sharpener attachment is used to sharpen your lawn mower blade and garden tools.

DeWalt DW713 Heavy-Duty 10'' (254mm) Single-Bevel Miter Saw

DeWalt DW713 Heavy-Duty 10'' (254mm) Single-Bevel Miter Saw
$219.00

Heavy-Duty 10" (254mm) Single-Bevel Miter Saw featuring:Features:Tall sliding fences support crown molding vertically 4-1/2" and easily slide out of the way for bevel cutsMachined base fence support - maintains fence alignment for accurate cutsStainless steel detent plate with 11 positive stops provides repeatable accuracy and jobsite duabilityCam miter lock for quick and accurate miter table positioningMiter detent override for fine adjustment and precise miter angles0-50° left and right miter capacity for greater versatility

Pages: first pageprev page3 4 5 6 7 8 9 10 11 12next pagelast page