Pages: first pageprev page3 4 5 6 7 8 9 10 11 12next pagelast page

Sjobergs Elite Workbench 1500 with Cabinet SM03

Sjobergs Elite Workbench 1500 with Cabinet SM03
$2,265.00

The Sjobergs Elite cabinetmaker's workbenches are made in Sweden to the very highest standards. Designed to totally eliminate any vibration, rocking or racking, they are suitable for the most demanding professionals. For maximum strength, the top is constructed with full-length laminations of knot-free European beech, without any ugly splices. Solid beech is also used in the preassembled trestle frames, and the entire bench is treated with top-quality oil. The tops are just under 3-3/8'' thick in the middle, joined with tongue and groove joints for consistent flatness. The skirt around the edge is a sturdy 4-5/16'' in height. The two massive pre-mounted vises, made in Sweden exclusively for Sjobergs, boast a 5-3/4'' opening capacity, and slide along fully adjustable guide rails to eliminate any jaw misalignment. If you are left-handed, the front vise can be moved to the other side of the bench, and the top rotated 180°. The bench also includes four solid steel bench dogs with side springs, while double rows of dog holes permit even the toughest clamping jobs using either vise. The heaviest, most durable benches in the Sjobergs line-built from solid beech and treated with top-quality oilMassive vises are 29'' wide with a 5-3/4'' opening capacityDouble rows of bench dog holes extend from both vise locationsTrestle is also pre-drilled with dog holesIncluded cabinet with doors and drawers offers convenient tool storage and added mass, which further eliminates vibrationIncludes four unbreakable 1'' round steel bench dogs that can be used in both the benchtop and the trestleVises can be rotated for both left- and right-handed useOptional Height Adjustment Blocks (56753, sold separately) raise the working height by 3-1/2'' for taller woodworkers

Powermatic 8'' Parallelogram Jointer

Powermatic 8'' Parallelogram Jointer
$2,244.99

The 8" Parallelogram Jointer offers performance and value in a machine loaded with features. Each machine has an extra long 82" bed length for better work support and is equipped with an innovative single handwheel design that tilts the fence in and out with positive stops at +/-45 and 90 degrees. A non-mar insert in the fence contacts the table to avoid scratching the surface during adjustments. The parallelogram design keeps the table in close proximity to the cutterhead for improved finish and allows for a fast depth of cut adjustment. This design also insures the table remains perfectly parallel, even after years of tough duty. The 1/8" depth limiter control knob gives you quick adjustment ability and safety. A quick twist of the knob will disable this feature. This jointer features a Powermatic controlled chip 3-knife cutterhead for a safe, smooth cut every time. Powerful 2HP or 3HP motors are totally enclosed in a heavily constructed steel stand providing plenty of power for the most demanding jobs.Extra long 82" table for expanded work support Parallelogram design helps maintain table parallelism and eases table raising and lowering Handwheel with worm gear system for precise fence tilting (Patented) 1/8" depth of cut limiter for fast table positioning High-mount switch for operator convenience No-mar fence insert protects tableProduct Specifications:Powermatic Part Number: 1610079Model Number: PJ882Brand: PowermaticHeight: 44"Width: 28"Length: 84"Net Weight: 610 lbs.Cutting Capacity (W x D): 8" x 1/2"Cutterhead Speed: 7000 RPMCuts Per Minute: 21000Cutterhead Diameter: 3-1/16"Number of Knives: 3(Helical/Standard): Standard Knife Size (L x W x T): 8" x 11/16" x 1/8"Rabbeting Capacity: 1/2"Table Height: 31-5/16"Table Size (L x W): 82" x 8"Infeed Table Length: 44"Outfeed Table Length: 38"Fence Size (L x H): 38-3/16" x 4-3/4"Fence Tilts: 45 degreesFence Positive Stops: -45 deg., 45 deg., 90 deg.Dust Port Outside Diameter: 4"Dust Collection Minimum: 450 cu.ft/minCFM Required: Motor Power: 2 HPMotor Phase: 1 PhMotor Voltage: 230 VMotor Current: 9 A

Powermatic 8'' Jointer w/Helical Cutterhead

Powermatic 8'' Jointer w/Helical Cutterhead
$2,244.99

This 8-inch jointer meets the demand for accuracy while combining unique, user-friendly functions. The infeed table lever can be used to rapidly position table height, then the handle rotated for fine-adjustment of cut depth. Fence tilting is accomplished by a worm gear system, smoothly operated by a simple handwheel. The tables provide 73" long extended support. A non-mar insert in the fence protects the table from scratches during adjustments. The jointer is available with a three knife cutterhead, or a helical cutterhead with four-sided knife inserts. The operating switch is high mounted for easy reach, and the push blocks have a magnetic base - store them on any metallic surface for instant access. Helical cutterhead with four-sided inserts provides smoother, quieter cutting and a superior finish Extra long tables are mounted on dovetailed ways, for extended workpiece support Adjustment lever offers quick infeed table positioning and fine-tuning of cut depth High mount switch for operator convenience Handwheel operated worm gear system for smooth fence tilting Magnetic push blocks can be stored on the machine within constant reach Non-mar fence insert protects table surface 5 Year Warranty

Jet 12'' Planer/Jointer Combo

Jet 12'' Planer/Jointer Combo
$2,244.99

You don't have to choose between buying a jointer or a planer - with the JJP-12, you can have both. Leave it to JET to design a machine that allows quick changeover between jointing and planing functions. This versatile machine features an extra large aluminum extruded fence with centered controls for quick adjustments, a built-in dust chute capable of handling both planing and jointing operations, and a powerful 3-horsepower induction motor that can handle the toughest lumber. A heavy-duty, fully welded steel base cabinet houses the motor and the planer table mechanism, while providing solid mounting for the associated controls and support for the jointer table and fence assemblies. Best of all, the fence can stay put when changing over functions. It's the best of both worlds!Three high-speed steel knife cutter head provides rapid cutting and a superior finishParallelogram design keeps the table close to the cutterhead for improved finish and allows for precise depth of cut adjustmentsExtra large aluminum extruded fence with centered controls for quick adjustmentsExtrmemly quick changeover between jointing and planing functions. Fence does not need to be removedPowerful 3HP induction motor easily handles the toughest jointing and planing tasksHeavy-duty, one-piece steel closed stand includes mounting tabs for increased stabilityBuilt-in dust chute with 4" dust port used for both jointing and planing operationsLarge handwheel for quick and precise adjustments of planer tableHeavy-duty cast iron tables with a machined finish to ensure accuracy and flatnessMagnetic switch provides safer and more reliable operation

Sjobergs Elite Workbench 2500

Sjobergs Elite Workbench 2500
$2,215.00

The Sjobergs Elite cabinetmaker's workbenches are made in Sweden to the very highest standards. Designed to totally eliminate any vibration, rocking or racking, they are suitable for the most demanding professionals. For maximum strength, the top is constructed with full-length laminations of knot-free European beech, without any ugly splices. Solid beech is also used in the preassembled trestle frames, and the entire bench is treated with top-quality oil. The tops are just under 3-3/8'' thick in the middle, joined with tongue and groove joints for consistent flatness. The skirt around the edge is a sturdy 4-5/16'' in height. The two massive pre-mounted vises, made in Sweden exclusively for Sjobergs, boast a 5-3/4'' opening capacity, and slide along fully adjustable guide rails to eliminate any jaw misalignment. If you are left-handed, the front vise can be moved to the other side of the bench, and the top rotated 180°. The bench also includes four solid steel bench dogs with side springs, while double rows of dog holes permit even the toughest clamping jobs using either vise. The heaviest, most durable benches in the Sjobergs line-built from solid beech and treated with top-quality oilMassive vises are 29'' wide with a 5-3/4'' opening capacityDouble rows of bench dog holes extend from both vise locationsTrestle is also pre-drilled with dog holesIncludes four unbreakable 1'' round steel bench dogs that can be used in both the benchtop and the trestleVises can be rotated for both left- and right-handed useOptional Height Adjustment Blocks (56753, sold separately) raise the working height by 3-1/2'' for taller woodworkers

Safety Speed Cut C4 Vertical Panel Saw w/Accessory Package

Safety Speed Cut C4 Vertical Panel Saw w/Accessory Package
$2,199.99

This model packs all the features of the full-sized saws into a portable 5' welded steel frame. Ideal for construction sites, sign shops and shops with size limitations. The included accessory package maximizes the benefits for crating and packaging shops. The C4 is ideal for cutting 4' x 8' sheets of material. This industrial saw runs on 15 amps with a 3-1/4" HP Milwaukee motor, 4 roller bearing systems, rotating saw head, adjustable rulers and a spring-loaded saw counter-balance system.Standard Equipment:3-1/4 HP, 15 Amp industrial duty saw motorZinc plated 1-3/4" steel guide tubes4 Nylatron roller bearing systemsAdjustable vertical and horizontal rulersThin material pressure guardSpring loaded counter balance systemInjection-molded plastic material rollersQuick change from vertical to horizontal cuttingSaw blade NOT includedOptional Accessories (Sold Separately):Extensions: (#25657) Come as a pair and add 20" to each side of the material handling roller fence allowing for easy processing of larger panels. Extensions enable full sized machines to easily cut panels larger than 10' in length quickly, accurately, and safely with just a single operator.

Powermatic PM1000 1-3/4 HP Table saw, 1-Phase With 52" Accu-Fence System

Powermatic PM1000 1-3/4 HP Table saw, 1-Phase With 52" Accu-Fence System
$2,099.99

The Powermatic PM1000 takes legendary performance and design principles from its larger predecessors, and packs them into a dynamic 115 volt machine. That means that more woodworkers than ever before will be able to enjoy the capability and rugged performance of a Powermatic cabinet saw, without requiring expensive electrical upgrades. With only a few minutes of use, the careful design and engineering put into every part of this saw become clearly apparent. Heavy cast iron throughout cuts vibration and noise. The famed Accu-Fence slides smoothly and locks securely, while the heavy 7'' hand wheels turn with ease. The blade guard raises and tilts in unison with the blade, and the hands-free power button with safety key makes for easy starts and stops. The PM1000 is available paired with your choice of two fences: 30'' (49024, sold separately) and 52''.Features:A rugged cabinet saw that only requires 115V power.Blade surround and collection hose provide an unobstructed path, maximizing dust collection.Conveniently located hands-free power switch.Tool-less guard assembly with independent side leaves is easy to use, maximizing safety.Blade guard raises, lowers and tilts in unison with the blade. Splitter and riving knives are mounted directly to blade mechanism, keeping gap between them and the blade consistent during height and angle adjustments.Sturdy miter gauge pivots 60 degrees to either side, allowing easy adjustment for a full range of cuts.Exclusive AccuFence provides rigidity and precision.The poly-V belt drive system reduces vibration and maximizes efficiency. Large, ergonomically designed 7'' handwheels provide momentum, making blade height and bevel adjustments easy.Arbor lock allows for one-handed blade changes with minimal tools.Cast iron work surface features a beveled edge.Bevel scale is conveniently located with large, easy-to-read numbers.Hinged motor cover provides quick access to the interior of the cabinet.

Sjobergs Elite Workbench 2000

Sjobergs Elite Workbench 2000
$2,060.00

The Sjobergs Elite cabinetmaker's workbenches are made in Sweden to the very highest standards. Designed to totally eliminate any vibration, rocking or racking, they are suitable for the most demanding professionals. For maximum strength, the top is constructed with full-length laminations of knot-free European beech, without any ugly splices. Solid beech is also used in the preassembled trestle frames, and the entire bench is treated with top-quality oil. The tops are just under 3-3/8'' thick in the middle, joined with tongue and groove joints for consistent flatness. The skirt around the edge is a sturdy 4-5/16'' in height. The two massive pre-mounted vises, made in Sweden exclusively for Sjobergs, boast a 5-3/4'' opening capacity, and slide along fully adjustable guide rails to eliminate any jaw misalignment. If you are left-handed, the front vise can be moved to the other side of the bench, and the top rotated 180°. The bench also includes four solid steel bench dogs with side springs, while double rows of dog holes permit even the toughest clamping jobs using either vise. The heaviest, most durable benches in the Sjobergs line-built from solid beech and treated with top-quality oilMassive vises are 29'' wide with a 5-3/4'' opening capacityDouble rows of bench dog holes extend from both vise locationsTrestle is also pre-drilled with dog holesIncludes four unbreakable 1'' round steel bench dogs that can be used in both the benchtop and the trestleVises can be rotated for both left- and right-handed useOptional Height Adjustment Blocks (56753, sold separately) raise the working height by 3-1/2'' for taller woodworkers

Jet 3HP Shaper, 1/2'' & 3/4'' Spindles

Jet 3HP Shaper, 1/2'' & 3/4'' Spindles
$2,039.99

The new model JWS-25X Shaper features a powerful 3HP motor with magnetic controls. The large 25"x 25-1/2" precision ground cast iron table provides plenty of support. Safe, easy cutter set up is assisted by a positive detent spindle lock. The independently adjustable left and right fence has a built in 4" dust port. Two-speeds let you select the best speed and torque for different cutter diameters Independently adjustable left and right fences, standard with a micro adjust control for precise positioning Large 25" X 25-1/2" precision ground cast iron table provides a durable work area Poly-V-belt transfers maximum power to the spindle Extruded aluminum fence comes with T-Slots and 2 feather board hold-downs Reversible spindle speeds for diverse shaping jobs Powerful 3HP, 1Ph motor with magnetic controls Starting pins for irregular shaping Extra large chrome handwheel is conveniently located for fast, easy and accurate spindle height adjustments 4" Dust port built into fence for convenient hookup to any dust collection system Spindle lock for safe and easy cutter set up Spindle height scale 5 Year Warranty Brochure

Jet Shaper with 1/2'' & 3/4'' Spindles

Jet Shaper with 1/2'' & 3/4'' Spindles
$2,024.00

If you're looking for a space-saving shaper for your shop, the new JET JWS-25CS Shaper is what you need. This compact powerhouse features a 8000 and 10000 RPM reversing 3HP motor. The large 25" by 25" precision ground cast iron table provides a large, durable, work area. Safe, easy cutter set up is assisted by a positive detent spindle lock. The independent left and right fences feature micro-adjustment, and a built in 4" dust port. If you feel you just don't have the space, the nominal 23" x 25" footprint of this workhorse is sure to change your mind. Put the new JET JWS-25CS Shaper in your shop today, you'll know why JET products are "Built Better to Build Better."Starting Pins for irregular shapingForward/reverse switch for left and right hand operation Two-speed step pulley drive lets you select the best speed and torque for different cutter diameters Independent left and right fences feature micro-adjustment and have zero-clearance capability Extra-large handwheel is conveniently located for fast, easy and accurate spindle height adjustments Positive detent spindle lock allows safer, easy cutter set-up 4" dust port connects to your collection system to keep your workplace dust and debris-free Fully enclosed, heavy-duty steel stand has a removable cover for easy motor access Unique ratcheting style levers allow you to micro-adjust your fence assembly to your exact needs Powerful 3HP motor and heavy-duty magnetic controls deliver smooth, consistent power on even the heaviest jobs 25" x 18" solid cast iron table comes with an additional 25" x 7" extension wings to handle extra large work pieces Four adjustable work hold-downs to secure your work while shaping 1/2" and 3/4" interchangeable spindles and router bit collets for use with shaper cutter and router bitsProduct Specifications:Jet Part Number: 708322Model Number: JWS-25CSBrand: JetHeight: 40"Width: 29"Length: 23"Net Weight: 338 lbs.Spindle Speed: 8,000 and 10,000 RPMSpindle Diameter: 1/2" and 3/4"Spindle Travel: 3Table Size: 25" x 25"Table Height from Floor: 34"Table T-Slot: 3/4" x 3/8"Table Opening Diameter: 6-7/8"Table Insert Opening Diameter: 1-5/8", 3", and 3-1/2"Fence Size (L x H): 9-1/2" x 2-3/4"Dust Port Outside Diameter: 4"Motor Power: 3 HPMotor Voltage: 230 VPrewired Voltage: 230 VMotor Current: 16 AMotor Phase: 1 PhStandard Equipment:1/2" and 3/4" interchangeable spindlesWorkpiece hold-downsT-slot mitre gaugeMicro-adjustable fenceRigid, one-piece closed standCutter guard4" dust port7" x 25" cast iron extension wing

Sjobergs Elite Workbench 1500

Sjobergs Elite Workbench 1500
$2,000.00

The Sjobergs Elite cabinetmaker's workbenches are made in Sweden to the very highest standards. Designed to totally eliminate any vibration, rocking or racking, they are suitable for the most demanding professionals. For maximum strength, the top is constructed with full-length laminations of knot-free European beech, without any ugly splices. Solid beech is also used in the preassembled trestle frames, and the entire bench is treated with top-quality oil. The tops are just under 3-3/8'' thick in the middle, joined with tongue and groove joints for consistent flatness. The skirt around the edge is a sturdy 4-5/16'' in height. The two massive pre-mounted vises, made in Sweden exclusively for Sjobergs, boast a 5-3/4'' opening capacity, and slide along fully adjustable guide rails to eliminate any jaw misalignment. If you are left-handed, the front vise can be moved to the other side of the bench, and the top rotated 180°. The bench also includes four solid steel bench dogs with side springs, while double rows of dog holes permit even the toughest clamping jobs using either vise. The heaviest, most durable benches in the Sjobergs line-built from solid beech and treated with top-quality oilMassive vises are 29'' wide with a 5-3/4'' opening capacityDouble rows of bench dog holes extend from both vise locationsTrestle is also pre-drilled with dog holesIncludes four unbreakable 1'' round steel bench dogs that can be used in both the benchtop and the trestleVises can be rotated for both left- and right-handed useOptional Height Adjustment Blocks (56753, sold separately) raise the working height by 3-1/2'' for taller woodworkers

Powermatic PM1000 1-3/4 HP Table saw, 1-Phase With 30" Accu-Fence System

Powermatic PM1000 1-3/4 HP Table saw, 1-Phase With 30" Accu-Fence System
$1,999.99

The Powermatic PM1000 takes legendary performance and design principles from its larger predecessors, and packs them into a dynamic 115 volt machine. That means that more woodworkers than ever before will be able to enjoy the capability and rugged performance of a Powermatic cabinet saw, without requiring expensive electrical upgrades. With only a few minutes of use, the careful design and engineering put into every part of this saw become clearly apparent. Heavy cast iron throughout cuts vibration and noise. The famed Accu-Fence slides smoothly and locks securely, while the heavy 7'' hand wheels turn with ease. The blade guard raises and tilts in unison with the blade, and the hands-free power button with safety key makes for easy starts and stops. The PM1000 is available paired with your choice of two fences: 30'' and 52'' (45878, sold separately).Features:A rugged cabinet saw that only requires 115V power.Blade surround and collection hose provide an unobstructed path, maximizing dust collection. Conveniently located hands-free power switch.Tool-less guard assembly with independent side leaves is easy to use, maximizing safety.Blade guard raises, lowers and tilts in unison with the blade.Splitter and riving knives are mounted directly to blade mechanism, keeping gap between them and the blade consistent during height and angle adjustments.Sturdy miter gauge pivots 60 degrees to either side, allowing easy adjustment for a full range of cuts. Exclusive AccuFence provides rigidity and precision.The poly-V belt drive system reduces vibration and maximizes efficiency. Large, ergonomically designed 7'' handwheels provide momentum, making blade height and bevel adjustments easy.Arbor lock allows for one-handed blade changes with minimal tools.Cast iron work surface features a beveled edge.Bevel scale is conveniently located with large, easy-to-read numbers.Hinged motor cover provides quick access to the interior of the cabinet.

Laguna Platinum Series Tablesaw Left-tilt w/ T-square Fence

Laguna Platinum Series Tablesaw Left-tilt w/ T-square Fence
$1,995.00

This could very well be the last table saw you'll ever need to buy. It has the power, the accuracy, and the legendary quality of a Laguna Tool product! Features a powerful 3HP TEFC motor and a precision ground table top made of premium grade cast iron, heat treated and ground to mirror-like flat surface. Get yours now and see the difference!Note: Direct Ship Item -- Shipped directly from manufacturerMust be shipped within 48 Contiguous United StatesEstimated Delivery time: 7-10 business days.25% restocking fee on all returned merchandise. Please call customer service before returning product.Features:20" x 27" main table with 2 T-slots, and fitted with two 10" x 27" cast iron ground wingsMassive widely spaced cabinet mounted trunions: perfectly machined to high accuracy to support the heavy-duty saw carriageMinimizes vibration and ensures proper blade alignmentComes with a robust spindle supported by two precision ball bearingsTriple V-belt drive system mounted between the two spindle bearingsComes with a powerful oversized 3HP TEFC motor with a standard magnetic safety switchEZ-Glide T-Square system for accuracy, repeatability, and easy operationStandard precisely machined miter gauge with adjustable miter bar4" dust port with a sloped dust chute inside cabinet for better dust collectionStandard regular insert and dado insertCSA, UL, CE certifiedSpecifications:3HP 230V Single phase motor 10" blade diameter 50" rip capacity 90° - 45° blade tilt Dual 3/8 x 3/4" T-Slot miter slots4" dust port 40" x 27" tabletop dimension 33" x 27" tabletop extensions Weights 485 lbs.

Jet 15'' Planer w/Quick-Change Knives

Jet 15'' Planer w/Quick-Change Knives
$1,989.99

Every serious woodworker needs a planer in the shop, but nobody likes to deal with the hassle of changing the knives. Enter the JET JWP-15DX Planer with quick change knives that align themselves, no adjustment required. Plus, each knife has two cutting edges to save you a little cash and a lot of frustration. This sweet machine features a monster 3-horsepower induction motor with two speed gear box to adjust your feed rate for a better finished surface. Its rock-solid table is constructed of cast iron and features infeed and outfeed table extensions with smooth-moving rollers that virtually eliminate snipe. And because even the coolest power planer is one of the messiest machines on the planet, JET's exclusive angled 4" dust port keeps your dust hose out of the way for easy hookup on your shop's dust collection system.Cutterhead with exclusive Quick change knives that align themselves without any adjustmentHeavy-duty cast iron and steel construction for added strength and durabilityTwo-speed gear box with automatic chain tensioner lets you adjust the feed rate to meet your needsLarge, cast iron, precision ground table for precise workpiece supportPowerful 3 HP TEFC induction motor with three V-belt transmission for smooth and consistent powerInfeed and outfeed table extensions with rollers help in the prevention of snipeTwo-speed gear box lets you adjust the feed rate to meet your needsWork table is precision-ground and polished for consistently smooth operationLarge handwheel with positive gear drive allows for quick and accurately table adjustmentsHeavy-duty table locks keep the table secure during useInternal caster system for mobilityExclusive angled 4" dust port keeps your dust hose out of the wayHeavy-duty steel closed stand with lockable casters for increased portabilityMagnetic controls provide long life and reliability

Jet Drum Sander 1.75HP w/Closed Stand & Casters

Jet Drum Sander 1.75HP w/Closed Stand & Casters
$1,939.99

This sander is one of the largest in it's class. You can sand up to 44" wide with better accuracy then any other sander in it's category. Features:Exclusive SandSmart infinitely variable-speed control produces the ultimate finish at a rate from 0 to 10 feet per minute and prevents machine overload.Patented conveyor belt Trackers dramatically reduce the need for manual belt adjustment.Precision-machined and balanced extruded aluminum drum is self-cooling to protect the surface being sanded from heat damage.Sealed and permanently lubricated drum ball bearings for longer life.Precision-flattened reinforced steel conveyor bed and no-give power feed belt provide a flat sanding surface for better results.Adjustable drum height and downward pressure feature virtually eliminate snipe.1700 RPM drum speed.Large cast-iron handwheel adjusts height at 1/16" per turn for precise sanding thickness control.Patented abrasive take-up fasteners make changing abrasives quick and easy.Continuous-duty, 1-3/4 HP motor is designed for consistent power and long life.On/off switch with overload protection is front-mounted for operator convenience.One feed and one drive motor for superior sanding control.

Powermatic 8'' Jointer w/Magnetic Switch

Powermatic 8'' Jointer w/Magnetic Switch
$1,939.99

This 8-inch jointer meets the demand for accuracy while combining unique, user-friendly functions. The infeed table lever can be used to rapidly position table height, then the handle rotated for fine-adjustment of cut depth. Fence tilting is accomplished by a worm gear system, smoothly operated by a simple handwheel. The tables provide 73" long extended support. A non-mar insert in the fence protects the table from scratches during adjustments. The jointer is available with a three knife cutterhead, or a helical cutterhead with four-sided knife inserts. The operating switch is high mounted for easy reach, and the push blocks have a magnetic base - store them on any metallic surface for instant access.High-speed heat-treated steel knives Extra long tables are mounted on dovetailed ways, for extended workpiece support Adjustment lever offers quick infeed table positioning and fine-tuning of cut depth High mount switch for operator convenience Handwheel operated worm gear system for smooth fence tilting Magnetic push blocks can be stored on the machine within constant reach Non-mar fence insert protects table surface Large extension rest on infeed table for rabbeting

Jet 8'' Jointer w/Helical Head

Jet 8'' Jointer w/Helical Head
$1,939.99

It's time to skip the hand tools and graduate to the JET JJ-8HH 8" long bed jointer. This beast boasts a helical insert cutterhead with staggered carbide inserts, yet its 2HP motor runs quietly and smoothly. Its exclusive front-mounted table adjustment handwheels make quick, easy and accurate corrections. An exclusive two-way tilting fence with positive stops at 45° and 90° make bevel operations smooth. Extra-long heavy-duty cast iron infeed and outfeed tables with precision-machined finish allow jointing of longer boards without tipping. Best of all, it comes with our JET industry-leading customer service professionals standing by to help from setup to output.Helical cutterhead with indexable carbide inserts for a superior finish and quieter cutHeavy-duty cast iron infeed and outfeed tables with precision machined finishTwo-way tilting fence with positive stops at 45 degrees and 90 degrees to handle bevel operationsLarge, heavy-duty table adjustment handwheel has a locking knob for quick, easy and secure table height correctionsBuilt-in dust chute with 4" port connects to your collection system for efficient dust/chip disposalCenter fence controls are conveniently mounted to allow quick adjustmentsPowerful 2HP motor easily handles the toughest jointing tasksHeavy-duty, one-piece steel closed stand includes mounting tabs for increased stability

SawStop Contractor Table Saw w/52'' Fence, CNS175-TGP52

SawStop Contractor Table Saw w/52'' Fence, CNS175-TGP52
$1,899.00

The SawStop 110V, 1.75HP 10" Professional Contractor Saw is engineered to fit the unique demands of the avid hobbyist in a home setting. Delivering the peerless fit and finish of the Professional Cabinet Saw, this saw's 110V power and optimized footprint make it ideal for the many challenges of a home shop. With SawStop's legendary safety system, uncompromising quality and industry-leading dust collection, the 110V Professional Contractor Saw is engineered to be the cornerstone of a home shop.NOTE: No International shipping available on SawStop items. SawStop items can only be shipped within the Continental United States. SawStop, the SawStop blade logo, and the configurations of SawStop products are either registered trademarks or trademarks of SawStop, LLC and are used with permission.Technical Details:Motor: 1.75 hp, 1 phase, 110 V, 14 AWeight: 381 lbs (table saw only)Max. rip, right of blade: 52"Cabinet footprint: 19 3/8"W x 19 3/8"DCast iron table: 20"W x 27"D, 44"W x 27"D (w/ extension wings)Stamped steel extension wing: 12"W x 27"DBlade: 40-tooth, professional grade, 5/8" arborBlade diameter: 10"Blade tilt: LeftBlade kerf: 0.118" (3mm)Blade plate thickness: 0.078" (2mm)Max. depth of cut, blade at 0°: 3-1/8" Max. depth of cut, blade at 45°: 2-1/4"Max. rip, left of blade: 12"Dado diameter: 8" (requires a separate brake cartridge and table insert)Dado max. width: 13/16" Arbor diameter at blade: 5/8"Main bearing size: 62mm OD x 30mm ID Second bearing size: 52mm OD x 25mm IDTable in front of blade (max. elevation): 10-1/4"Table behind blade (max. elevation): 7-1/2"Arbor runout: 0.001" Maximum allowable runoutBlade lateral movement over full elevation range: 0.006" MaximumTable flatness measured diagonally: 0.010" Maximum gapOverall table and extension wing flatness: 0.025" maximum gapBlade alignment with miter slot: 0.010" Maximum displacementDeviation of miter gauge indexing stops from actual: ½0.25°Alignment between spreader and blade: 0.010" Maximum differenceMiter slots: T-shaped, 3/4" at top, 1" at bottom, 3/8" deepDust collection port diameter: 4"Riving knife / splitter thickness: 0.078" (2mm)Blade guard: polycarbonate, extends only 5/8" to right of bladeInsert: zero clearance, steel core, ABS surfacesHand wheels: 7" diameter, cast iron with chrome handleBelts: 2 V-ribbed belts - arbor belt is static dissipative

Pages: first pageprev page3 4 5 6 7 8 9 10 11 12next pagelast page