Robert Sorby Spiralling System allows you to create spirals on turned pieces. The Robert Sorby Spiralling System is a further development on the texturing tool and is used to create both left and right handed spirals with ease. It features an innovative rest with indexed reference positions, which enable the replication of the spirals. Differing pitch and twist profiles are made possible by altering the presentation angle of the cutter or by changing the cutter to a different one.
Our Mini Carbide Turning Tools feature a replaceable and rotatable cutter that eliminates the hassle and downtime of sharpening. Simply rotate the carbide cutter for a fresh, sharp edge, and replace it once all available edges have grown dull. The solid carbide cutting edges stay sharper, longer when compared to steel. The handles are turned from fine, solid ash, and are ergonomic with molded rubber that enhances your grip and reduces fatigue. The tools are available in three cutting profiles: round, square and diamond-shaped. Total overall length of Mini Turning Tools is approximately 13-1/2". Ash handles are 9-1/2" long from the butt of the handle to the top of the stainless steel ferrule. Length of the shaft is approximately 4". Carbide cutters are not interchangeable between the different tools.Diamond Carbide Mini Turning Tool is ideal for use as a parting tool, and for tight profiles. Overall length of the diamond cutter is 1-1/8". Angle of diamond cutter is approximately 35 degrees.Square Carbide Mini Turning Tool is ideal for flat or convex areas on spindles and pen turnings. Square cutter is 3/8" square.Round Carbide Mini Turning Tool is ideal for producing a smooth finish on curved, concave surfaces and for general turning applications. Diameter of the circular cutter is just under 1/2".
The ultimate hollowing tool that lets you produce a variety of hollow forms quickly and efficiently! Articulating link lets you undercut the rims of projects and produce any hollow shape possibleSlices rather than scrapes for a fast, smooth cut Blade can be turned for long cutting life and is easily resharpened Multiple adjustments give you just the cut you needPart of the Robert Sorby Sovereign Ultima modular system that is used with the Interchangeable Handle (sold separately)Small tool enables woodturners to produce hollow forms up to 11" (275 mm) Made from high-grade HSS Only one third of the cutter is exposed at one time, allowing you to rotate the blade twice through 120° before it needs to be sharpened Designed for both wet and dry woods An articulating link which enables the turner to undercut the rims of projects and produce a variety of hollow form shapes from traditional vase to squashed form Shaft can be extended with additional links (sold separately) Cleverly designed shaving clearance which prevents clogging in normal use A high-performance cutter system which slices through wood rather than scrapes Adjustable cutter depth for heavy or light cuts with fine micro adjustment for extra finesse Removable cutter can be easily replaced or sharpened with diamond hone100% manufactured in the UK
This Robert Sorby Micro Turning Set is scaled down in size, but not in quality! Robert Sorby is the world's premier manufacturer of specialist wood working tools with a heritage dating back over two hundred years. Designed for smaller, more delicate work, this set includes a 1/8" gouge, 1/4" gouge, 1/4" skew chisel, 1/4" round-nose scraper, and 1/16" parting tool. HSS blades are 3-1/2" long. Ash handles are 6-1/2" long. Includes sharpening instructions.Technical DetailsThe quality you would expect from Robert SorbyDesigned for smaller, more delicate workHSS blades are 3-1/2" longAsh handles are 6-1/2" longIncludes a 1/8" gouge, 1/4" gouge, 1/4" skew chisel, 1/4" round-nose scraper, and 1/16" parting toolIncludes sharpening instructions
Pre-honed to a mirror-like edge that turns out smooth shavings right out of the box, the Deluxe Palm & Knife Set marries two popular carving sets to give carvers a wide range of capabilities in one economical package. The set includes four razor-sharp carving knives: a roughing knife, a pelican knife, a detail knife and a mini-detail knife. Add to that five palm tools: a skew, V-tool, and threegouges in 1/8", 5/16" and 3/8" sizes. The set is packaged in a sturdy wooden box for convenient and safe storage in any work area.Technical Details:Ergonomically designed ash handles allow for long periods of carving without hand fatigue.Hand-sharpened carving blades are made of carbon-steel, precision-machined, and specially heat-treated to harden the cutting edge so it stays sharp.Made in USA.
By moving the primary handle to the rear of the tool, Triton's engineers have created a belt sander that can be turned upside down for use as a stationary sander. The included clamps slip into a pair of openings in the housing, firmly holding the sander to the bench. This is an ideal feature for sanding small or delicate parts. The front bail handle can also be pivoted out of the way for this purpose, or pivoted vertically so you can get the nose up close to a wall when sanding wood floors, for example. One side of the sander is also flush with the belt for the ability to sand directly up against a wall. The powerful 10A motor with variable speed control promises rapid stock removal and the ability to tailor the tool to your task. Small diameter front roller improves sanding in confined areas and detail work. Side dust port connects to included dust bag or vacuum system. Includes inversion clamps, dust bag and sanding belt.Features: Powerful 1200W motor for rapid stock removalVariable speed control improves versatility when working with different workpiecesSide dust port connects to the supplied dust bag or dust extraction systemBelt tracking adjustment for accurate alignment of the sanding beltRubber over-moulded grip offers increased support, safety & control of the toolLock-on button adds convenience with extended useSmall diameter front roller allows for sanding in confined areasPower-on neon increases operator safetyRemovable bail handle increases support & safetyEasy access brushes allows changing of worn brushes
The Vanity Valet Secret transforms the false sink panel on your bathroom vanity into an organized storage solution for a hair dryer and up to three curling irons. Just open the panel to reveal a neat row of ventilated metal cups, which accept your hair styling tools. With your bulky appliances conveniently stowed in the cabinet, you'll have cleaner, more spacious countertops, and with the included cord wraps, you'll never have to deal with tangled cords again. Since the Vanity Valet taps into otherwise unused space, you'll bring order to your bathroom without consuming any existing storage. To use unmodified, your cabinet opening must be at least 21" wide. Anything less will require you to cut the appliance panel to fit.Frees up valuable counter space.Prevents countertop burns from hot appliances.Makes use of unused storage space.Tools can be put away hot-no need to let them cool down before storing.Integrated cord storage prevents tangled cords.To release the cords, no unwinding is required; simply turn the knob to release the entire cord, much like the cord wraps on a vacuum cleaner.Four storage tubes included:One 3" dia. open-ended tube for hair dryers.Two 2" dia. x 5" long closed-end tubes for curling irons.One 1-1/2" dia. x 5" long closed-end tube for a smaller curling iron.Tubes are ventilated to allow heat to escape.Made of 304 stainless steel to help expel heat.Cabinet Requirements:To use the appliance panel out of the box, the cabinet opening must be 21" in width or greater. Anything less will require you to cut the appliance panel to fit.Opening beneath false panel should be at least 4" high (ideal height is 5" or greater).Sink can be top or under mount as long as the face of the sink is not covering the opening to the false panel. With the panel removed, there should be room to easily extend your hand past the sink.Will not work with rectangular sinks.
Don't let dull drill bits slow you down! Top-of-the-line professional bit sharpener from Drill Doctor is built to handle larger drill bits - up to 3/4" - and offers additional custom flexibility.Sharpens 3/32"-3/4" bits with one heavy-duty chuck.With durable metal sharpening and split-point ports.Quick-change diamond sharpening wheel.Sharpen dull and broken drill bits in less than 60 seconds, including high-speed steel, black oxide, masonry, TiN coated, cobalt, carbide, split point and custom bit angles from 115° to 140°.New custom point lets you choose any angle from 115° to 140°.New adjustable material take-off allows you to touch up a slightly dull bit or deep grind a heavily damaged bit.Quick-change diamond sharpening wheel is easy to replace without tools after hundreds of sharpenings.With variable alignment to adjust chisel and relief angles.Create self-centering split points in any drill bit.Patented dual-cam sharpening system lets you sharpen bits with a few easy turns.Powerful 15,000 RPM motor.6-foot power cord.Plastic housing is double insulated and impact resistant.Includes polyethylene carrying case, instructional DVD and user's guide.
RapidAir Maxline tubing is completely leakproof, corrosion resistant, and incredibly easy to install. The tubing is a layered blend of aluminum and HDPE plastic. It is easily bendable by hand for easy routing with a minimum of joints, yet maintains its shape and rigidity. And there's no need for a soldering iron and hacksaw - to make a connection, simply cut the tubing to length with the included snips, bevel with the included beveling tool, insert it into the appropriate compression fitting (sold separately), and turn the nut one full turn.Technical Details:175 psi working pressureMaxline tubing features an aluminum core sandwiched by HDPE plastic for corrosion resistance. Installation methods include direct burial, on-wall and in-wall applications.Tubing maintains shape after bending by hand. Meets OSHA requirements Operating Pressure at 70°F: 175psi Operating Pressure at 140°F: 140psi Temperature range: -40°F to 140°FCompatible with common compressor oilsRecommended for: Building layouts with many obstructions, corners etcMultiple air users Industrial plants, auto body and repair shops, farm, woodworkingUnderground burial 3/4" size for tubing lengths under 150 ft from compressor 3/4" size for buildings less than 3600 sq ft (60 ft x 60 ft)
Recommended for the initial turning of uneven or square stock to round.Recommended for the initial turning of uneven or square stock to round. The shape of the roughing-out gouge enables the tool to cut safely with the wings (the name given to the tips of the side walls) well back from the workpiece. Not for use on bowl grain projects.
Create beautiful pens and similar projects with this Crown Mini Turning Set. With five of the most popular turning tools, this set is perfect for the beginning woodturner. Tools are pre-honed for immediate use. All are made of high speed steel to hold an edge and last longer.Set includes:1/8" Gouge1/4" Gouge1/16" Parting tool1/4" Round nose scraper1/4" Skew chisel
Buying on a budget doesn't always mean a sacrifice in quality, and this Robert Sorby turning tool set proves it, offering an excellent turning set for those on a budget who still want the best. With three of the most versatile turning tools available - an 1/8" Parting Tool, a 3/8" Spindle Gouge, and a 3/4" Roughing Gouge - the kit makes an excellent starter set for beginning turners and experienced turners alike. The chisels come in a beautiful burgundy box, so it's a great gift item. The set includes the instructional DVD, "Starting Out Woodturning". All tools are made from top-quality HSS with solid ash handles and brass ferrules in Sheffield, England. Robert Sorby 830H 1/8" Parting Tool:Used to part the finished project off from the waste materialParallel sides make for a rigid tool that handles well.The 1/8" size reduces the amount of waste, vital if the timber is an expensive,exotic one.Also makes for a fine detailing tool, e.g. beads and fillets.Overall length: 13-3/4"Handle length: 8-7/8"Blade length: 4-7/8"Blade width: 1/8" x 1/2"Robert Sorby 840H 3/8" Spindle Gouge:This is a detailing tool used on between-center work, where the grain isrunning parallel to the bed bars.Used to create coves, beads and other profiles on goblets, vases and egg cups.Overall length: 16-1/2"Handle length: 10-1/8" Blade length: 6-3/8"Blade width: 3/8"Robert Sorby 843H 3/4" Roughing Gouge:Recommended for initial turning of uneven or square stock to round.Shape enables the tool to cut safely with the wings (the name given to the tipsof the side walls) well back from the workpiece.Not for use on bowl grain projects.Overall length: 18-3/4"Handle length: 6-5/8"Blade length: 12-1/8"Blade width: 1" x 5/8"
At only 9-1/2" long, these tools are the perfect size for turning pens, bottle stoppers and other small items. Carbide cutters can be easily rotated to expose a fresh edge. The set includes one high speed steel 1/8" parting tool, and two tools with replaceable carbide cutters: a 1/2" round cutter and a 1/2" square cutter with a 2" radius that produces an exceptionally smooth finish cut. Handles are solid ash encased in thick, molded rubber for excellent ergonomics and a sure grip.Total overall length of Pen Turning Tools is approximately 9-1/2".Ash handles are 6-1/2" long from the butt of the handle to the top of the ferrule.Length of the shaft is approximately 3".Round cutter head is used for roughing out the blank and general turning.The radius square cutter is ideal for smooth finishing cuts, where it's slight radius helps reduce the risk of gouging.Use the 1/8" parting tool for parting off, and for creating grooves.Carbide cutters are not interchangeable between the different tools.When replacing the carbide insert for the Radius Square Cutter, use SR1 (47377) only. This tool will not accept a standard square cutter.
DeWalt DCF680N2 8V Max Gyroscopic Screwdriver Kit When operating DeWalt's Gyroscopic Screwdriver, think of it as exactly that—a screwdriver. Twist to the left to loosen, twist to the right to tighten. If you want to increase the speed, simply twist your wrist further. Sensors inside the tool respond to the motion of your wrist, eliminating the need for manual switches. The adjustable two-position handle allows both an in-line screwdriver configuration or a pistol-grip configuration, while dual LED lights provide better visibility in dark spaces. The kit includes two battery packs, each of which can last for up to 5 days of runtime with the typical user. For a compact, portable screwdriver with precise, intuitive speed control, look no further than the DeWalt DCF680N2. Motion-activated forward and reverse eliminates need for manual switchMotion-activated variable speed from 0-430 RPM—simply turn your wrist further in either direction to speed up the drillAdjustable two-position handle allows for operation in either in-line or pistol-grip positionsExcellent for light fastening applications in wood, plastic, and light-gauge metalLED light illuminates confined areas without casting shadowsOn-board battery indicator warns user when battery is low1/4'' hex-shank chuck holds 1'' driver bits and allows for quick screwdriver bit changes8V MAX battery pack boasts longer run-time and charges in only one hourFifteen clutch positions for precise control to prevent strippingDeWalt DCL023 8V Max LED Work Light This handy pocket-sized flashlight is an optional add-on to the DeWalt DCF680N2 8V Max Gyroscopic Screwdriver Kit, which includes a spare battery required to run the light (battery is not included with the work light). It is also available as a replacement if you had the work light previously, but it was lost or broken. The light fits easily in the palm of your hand or in your back pocket, and makes a great compact addition to any tool kit. Its LED technology takes very little power, allowing up to five hours of illumination on a single charge. Requires 8V battery (not included, but included with the separate 58467)Bright LED output—80 LumensCompact size for easy portability2-Zone light pattern
This electronically driven automatic blast gate is an optional upgrade to the iVac Pro Wireless Dust Collection Control System, bringing one-touch simplicity to managing your dust collection airflow. Simply turn on your power tool, and the iVac Pro Tool (42891, sold separately) sends a wireless signal to automatically open the Pro Blast Gate, and another signal to the iVac Pro Switch (42897, sold separately), which turns on your dust collector. Turn off your power tool, and after a short interval to clear dust, the blast gate closes and the dust collector powers down. This automation prevents the irritating dust clouds that result from forgetting to open a blast gate, and the reduced suction that results from forgetting to close it afterward. Prevents the irritating dust clouds you get from forgetting to open the blast gateReduces the potential for accidents from reaching for blast gates while machines are runningOptimizes the suction in your system by keeping a minimum number of gates open at one timeBlast gate can also be controlled with the included toggle switchUp to eight blast gates can operate on one systemA Starter Pack (50767) is also available separately that includes two gates, a wireless remote and a manual toggle switchRF range: 40'
Tool set for your turning needs. This turning set has drop forged, high carbon alloy tool steel blades. Includes seasoned kiln-dried hardwood handles and plated ferrules.Accurately ground, sharpened, hardened, and tempered. All have 10" handles and are 16" long overall."Turning tool Set consists of:1/2" skew1" skew3/8" gouge1" gouge1/2" spear point1/2" parting tool5/8" gouge1/2" round point
The Robert Sorby TurnMaster is a premium quality modular turning tool that accepts a variety of interchangeable cutters, allowing you to use a single tool for a wide variety of turning projects. The TurnMaster's solid 3/4" steel shank is flattened on the bottom for stability, and the patented TurnMaster head can be rotated to three indexed positions: centered for shaping, and left and right shear for finishing. TurnMaster turning tools are sold with your choice of round, square or detail point cutters in carbide, or a pack of all three in high speed steel. Additional cutters are available in a range of profiles, and in three materials for incredible versatility. For more on the cutter materials, click the "More Info" tab. Each tool ships with Robert Sorby's trademark ash handle installed with a brass collar. If you wish to turn your own handle, TurnMaster Shanks are available separately (e.g. 45649).Technical Details:Patented three-position indexable head can be quickly and easily changed by loosening the locking collar with the included wrench.Head is designed so that all TurnMaster cutters will fit one tool.Additional heads can also be purchased (48797, sold separately) if the user wishes to have a dedicated head for certain cutters.Three indexed positions allow you to go from shaping (centered) to finishing (left or right shear) with a simple turn of the head.Cutters are held in place with a high tensile torx screw which canbe easily removed to change the cutter.Which cutter material should I use?Cutters are available in Tungsten Carbide, High Speed Steel (HSS) and HSS coated with Titanium Nitride ("Excelsior").Tungsten Carbide:Designed to be disposable, these carbide cutters don't require any sharpening. (Carbide tips can actually be sharpened, but require specialized diamond abrasives).Carbide stays reasonably sharp for a longer period of time, but because of its coarse grain, can never be sharpened as finely as HSS.Gives extended cutting life with the toughest of woods.Sharpens to 0.7 - 1 microns.Hardness: 90 RC.Material: micro grade tungsten carbide.High Speed Steel (HSS):Due to its finer grain structure, HSS holds a sharper edge than carbide, but will dull more quickly.Very economical - can be re-sharpened multiple times with standard sharpening equipment.Provides unmatched quality for the discerning woodturner keen on getting the greatest detail from their tools.Sharpens to 0.2 - 0.4 microns.Hardness : 62 RC.Material: M2 HSS.Titanium Nitride (Excelsior):These cutters provide the same advantages as HSS but give added longevity before sharpening is required.No specialized equipment is required for sharpening.Repeated sharpening does not remove the titanium nitride coating, it simply renews it.Sharpens to 0.15 - 0.2 microns.Hardness of titanium coating is up to 85 RC.Material: Titanium nitride coated M2 HSS.How to use the TurnMaster:Set the head in a neutral position so that the cutter is horizontal when the tool is held flat on the lathe tool rest.This is done by loosening the locking collar with the unique wrench and rotating the collar a minimum of two and half turns, which will allow the head to be turned to the required position.Once it is set into the correct position re-tighten the locking collar with the wrench to secure the head into place.To assist with the tightening of the collar, the included small Tommy bar can be placed in the hole situated in the shank to give additional purchase, but please do not over tighten.The tool is now in standard scraping mode.There are three positive stop positions to lock the head for standard scraping, shear scraping to the left and shear scraping to the right.To remove the waste material and to create an initial shape, use either the square or round cutter depending on the shape of the project being turned.Once the required shape has been created, turn the head of the tool to the left or right following the instructions as above.Now the TurnMaster is in shear scraping mode and a more refined shape and finish can be achieved.To ensure the best available finish, always cut with the grain using a freshly sharpened HSS cutter. This will ensure that the grain is sliced to produce a clean surface finish.