Pages: first pageprev page1 2 3 4 5 6 7 8 9 10next pagelast page

3/4" Robert Sorby #843H Roughing-Out Gouge

3/4" Robert Sorby #843H Roughing-Out Gouge
$79.99

Recommended for the initial turning of uneven or square stock to round. The shape of the roughing-out gouge enables the tool to cut safely with the wings (the name given to the tips of the side walls) well back from the workpiece. Not for use on bowl grain projects.

Robert Sorby Bowl Gouges-Standard Bowl Gouges

Robert Sorby Bowl Gouges-Standard Bowl Gouges
$79.99

Robert Sorby bowl gouges are a must in the tool kit of every bowl turner.Throughout the world, the name Robert Sorby is synonymous with all that is good in woodturning and Robert Sorby turning tools remain the benchmark by which all others are judged. Robert Sorby bowl gouges are a must in the tool kit of every bowl turner. Milled from round bar, giving both mass and stability. These tools are ideal for making bowls. They can produce either massive profiling cuts or delicate cuts as necessary.

Robert Sorby Sovereign Turning Tool System

Robert Sorby Sovereign Turning Tool System
$74.99

Use a wide variety of turning tools with the seamless steel handle. The high grade aluminum head and base help dampen vibration and the Softex grip make this handle the ultimate in comfort. Tool shanks of up to 5/8" in diameter are held in place by brass-tipped set screws to prevent damage. Handle is hollow and end cap unscrews to allow addition of lead shot for extra weight to provide greater control of your tools. Includes allen wrenches and collet adapters for 1/2" and 3/8" diameter tools. Made in England.

Robert Sorby Micro Spiraling Set

Robert Sorby Micro Spiraling Set
$73.99

Ideal for intricate texturing and other fine surface decoration, this complete set willtake your small-scale turnings to a new level of craftsmanship. Along with a modularaluminum handle, it features a removable spiraling attachment with twointerchangeable cutters and an integral tool guide. For those who already own thehandle, the attachment and cutters are also available separately.The built-in tool guide helps maintain the perfect angle while adding fine textureand decoration. The toothed spiraling wheels (one for fine cutting, one for medium)measure 7/8" in diameter and can be changed tool-free.As part of the Robert Sorby Modular Micro Tool System, the included handle acceptsall other Sorby Micro attachments. See offers for the See offers for the Sandmaster Set, Spindle Set, and Hollowing Set fordetails.Complete Set includes:Aluminum handle (5-3/4" long) Micro Spiraling Tool (head and two cutters)Fine Spiraling CutterMedium Spiraling Cutter(2) allen wrenchesInstruction leafletAn additional Texturing Cutter is available separately for miniature projectdecoration.

Hunter Carbide Bit and Mount for Carter Hollow Roller System

Hunter Carbide Bit and Mount for Carter Hollow Roller System
$73.99

Hollow vessels and bowls quickly and accurately! The super-sharp Hunter brand Carbide Bit for the Carter Hollow Roller System is ready right-out-of-the-box because it doesn't need any grinding or sharpening. Compared to High Speed Steel (HSS), the carbide bit will last 20-30 times longer. And when you're looking for a sharper edge on the bit, simply rotate the cutter head. Includes a mounting shank, torx screw and wrench.Technical Details:Provides a super-sharp cutting edge for fast and accurate hollowing of vessels and bowlsBox-ready, simply attach to your tool and start turningCarbide bit will last 20-30 times longer than High Speed Steel (HSS)Round bit may be rotated when in need of a sharper edgeEasily replaced by turning one screwMade in USA

Starter Pen Turning Kit

Starter Pen Turning Kit
$72.49

This kit contains all the essential tooling you need to start turning custom pens. Includes 3 pen blanks (Bloodwood, Bubinga and Olivewood), 3 gold-plated hardware kits with twist mechanisms, 7mm mandrel with knurled nut and #2 Morse Taper, 7mm bushings, a 7mm Brad Point Drill Bit, a 1 oz. bottle of CA Glue, a Pen Mill for truing up all mating surfaces and a storage case with 28 adjustable compartments.One Bloodwood Pen Blank.One Bubinga Pen Blank.One Olivewood Pen Blank.(3) 7mm Pen Hardware Kits.7mm mandrel with knurled nut and #2 Morse Taper.7mm bushings.7mm Brad Point Drill Bit.1 oz. bottle of CA Glue.Pen Mill (2-piece design. 3/16" threaded shank, 1/2" end mill, 1/4" clean-out shaft. Includes Allen wrench for interchanging "end mill" component.)Plano Storage Case with 28 adjustable compartments.

DeWalt DW7342 12-1/2'' Replacement DW734 Planer Blades

DeWalt DW7342 12-1/2'' Replacement DW734 Planer Blades
$70.99

DeWalt DW7342 Replacement Planer Blades are made of high quality M2 laminated steel providing prolonged life as well as sharpness. The hole pattern fits easily on the knife locating pins machined on the cutterhead. These replacement blades are designed to be turned over when dull to use the other side and replaced when both sides have been used. The DeWalt DW7342 replacement blades are designed to fit the DeWalt 734 12-1/2" Portable Planer.Technical Details:Measures 12.5" longdual angle 45 degree angle with 40 degree relief angleReversibleM2 laminated tool steelDesigned for use with the DeWalt 734 Portable Planer

Square Radius Carbide Mini Turning Tool

Square Radius Carbide Mini Turning Tool
$69.99

This Square Radius Carbide Mini Turning Tool from Rockler features a subtle 2'' radius that works perfectly for smoothing cuts. Additionally, the replaceable, rotatable cutter eliminates the hassle and downtime of sharpening. Simply rotate the carbide cutter for a fresh, sharp edge, and replace it once all available edges have grown dull. The solid carbide cutter also stays sharp for longer when compared with steel, giving you a much longer useful life. Shaft features a flattened back for stability when using the tool rest. The handles are made of solid ash encased with a thick, molded rubber end for an enhanced grip and reduced fatigue.

Diamond Carbide Mini Turning Tool

Diamond Carbide Mini Turning Tool
$69.99

This Diamond Carbide Mini Turning Tool from Rockler features a replaceable and rotatable cutter that eliminates the hassle and downtime of sharpening. Simply rotate the carbide cutter for a fresh, sharp edge, and replace it once all available edges have grown dull. The solid carbide cutter also stays sharp for longer when compared with steel, giving you a much longer useful life. Shaft features a flattened back for stability when using the tool rest. The handles are made of solid ash encased with a thick, molded rubber end for an enhanced grip and reduced fatigue.Technical Details:Ideal for use as a parting tool, and for tight profiles.Total overall length of Mini Turning Tool is approximately 13-1/2".Length of the diamond cutter is 1-1/8", with an angle of about 35 degrees.Ash handles are 9-1/2" long from the butt of the handle to the top of the stainless steel ferrule.Length of the shaft is approximately 4".Ash handles feature a molded rubber end for a secure, effortless grip and excellent ergonomics.Note: carbide cutters are not interchangeable between the different tools. Also Available from Rockler:Round Carbide Mini Turning ToolSquare Carbide Mini Turning ToolCarbide Mini Turning Tool 3-Piece Set

Square Carbide Mini Turning Tool

Square Carbide Mini Turning Tool
$69.99

This Square Carbide Mini Turning Tool from Rockler features a replaceable and rotatable cutter that eliminates the hassle and downtime of sharpening. Simply rotate the carbide cutter for a fresh, sharp edge, and replace it once all available edges have grown dull. The solid carbide cutter also stays sharp for longer when compared with steel, giving you a much longer useful life. Shaft features a flattened back for stability when using the tool rest. The handles are made of solid ash encased with a thick, molded rubber end for an enhanced grip and reduced fatigue.Technical Details:Ideal profile for flat or convex areas on spindles and pen turnings.Diameter of square cutter is 3/8".Total overall length of Mini Turning Tool is approximately 13-1/2".Ash handles are 9-1/2" long from the butt of the handle to the top of the stainless steel ferrule.Length of the shaft is approximately 4".Ash handles are coated with a soft, grippy rubber for a secure, effortless grip and excellent ergonomics.Note: carbide cutters are not interchangeable between the different tools. Also Available from Rockler:Round Carbide Mini Turning ToolDiamond Carbide Mini Turning ToolCarbide Mini Turning Tool 3-Piece Set

Robert Sorby Swan Neck Hollowing Tools

Robert Sorby Swan Neck Hollowing Tools
$69.99

Robert Sorby makes blind turning or undercutting where reach is restricted easier than ever with a Swan Neck Hollowing Tool. Each Swan Neck Hollowing Tool has an ash handle and features cutting tips that can be resharpened when neccessary. Each tool is designed to be used with a round bar deciretly behind the curved area (also called the swan neck) against a resting tool. 14'' Swan Neck Hallowing ToolIdeal for end grain use on shallower depth pieces and features a 851C General Purpose Cutter.20'' Swan Neck Hallowing ToolIdeal for end grain use on shallower depth pieces and features a 851C General Purpose Cutter with a longer reach than the 14'' tool.24'' Swan Neck Hallowing ToolIdeal for both end grain and side grain work due to it's substanisal steel neck and reach.

Robert Sorby Stebcentre with #2 Morse Taper

Robert Sorby Stebcentre with #2 Morse Taper
$69.99

Replace your traditional spur drive with the Revolutionary Robert Sorby Stebcentre Morse Taper! An essential addition to every turner's toolkit, it incorporates a spring loaded point in stainless steel and a set of razor sharp teeth that bite into the workpiece. Provides added security for the novice turner by allowing you to vary the degree of bite to the point where kick back of the turning chisel is eliminated. The Stebcentre may also be removed without the need to stop and re-start the lathe. Simply wind back the tail stock and the piece can be withdrawn safely.Size refers to drive face diameter. Comes in diameters of 1/2", 7/8", and 1-1/4". Made in England.Technical Details:Replaces traditional spur drivesIncorporates a spring loaded point in stainless steel and a set of razor sharp teeth that bite into the workpieceLets you vary the degree of bite to the point where kick back of the turning chisel is eliminatedMay be removed without the need to stop and re-start the latheSize refers to drive face diameterComes in diameters of 1/2", 7/8", and 1-1/4"Made in England

iVac Pro Switch Wireless Dust Collection Controller System

iVac Pro Switch Wireless Dust Collection Controller System
$69.99

Eliminate the unsafe distraction of turning on and off your dust collection system while you're operating a shop tool! The iVac Pro consists of two main components, the Pro Switch and the Pro Tool (Sold Separately), in your choice of 240V or 115V. A complete iVac Pro System gives you wireless control of your dust collection system, automatically turning it on/off every time you turn on/off one of your shop tools. Here is how it works: plug your dust collection system into a Pro Switch. Now add a Pro Tool for every shop tool you want to automatically activate your dust collection system. One Pro Switch can accommodate up to 8 Pro Tools, as long as they are within the 40' radio frequency range, making it possible to run your dust collection system only when you run your tools! And running more than one tool at the same time won't cause interference; the Pro Switch won't turn your dust collection system off until the last Pro Tool in your system is shut off. You can even program your Pro Switch to run a little longer than your tool to allow for dust clearance. So get started today by selecting a Pro Switch in 240V or 115V and adding up to 8 Pro Tools.NOTE: IVac Pro System Boxes are built to handle the amperage advertised, however, both the UL (American) and CSA (Canadian) safety approval agencies require the boxes to be labeled at 80% of their actual amperage capacity due to the fact that the units have an attached power supply cord. Example - The 115 Volt / 20 Amp box is labeled as only 16 amps, however the box will actually continuously handle 20 amp AC mains.

Rockler Round Carbide Mini Turning Tool

Rockler Round Carbide Mini Turning Tool
$69.99

This Round Carbide Mini Turning Tool from Rockler features a replaceable and rotatable cutter that eliminates the hassle and downtime of sharpening.Simply rotate the carbide cutter for a fresh, sharp edge, and replace it once all available edges have grown dull.The solid carbide cutter also stays sharp for longer when compared with steel, giving you a much longer useful life.Shaft features a flattened back for stability when using the tool rest.The handles are made of solid ash encased with a thick, molded rubber end for an enhanced grip and reduced fatigue.Technical Details:Ideal for giving you a smooth finish on curved, concave surfaces and for general turning applications.Total overall length of Mini Turning Tool is approximately 13-1/2".Diameter of the round cutter is just under 1/2".Ash handles are 9-1/2" long from the butt of the handle to the top of the stainless steel ferrule.Length of the shaft is approximately 4".Ash handles feature molded rubber for a secure, effortless grip and excellent ergonomics. Also Available from Rockler:Diamond Carbide Mini Turning ToolSquare Carbide Mini Turning ToolCarbide Mini Turning Tool 3-Piece SetNote: carbide cutters are not interchangeable between the different tools.

Robert Sorby Bowl Gouges-Fingernail Bowl Gouges

Robert Sorby Bowl Gouges-Fingernail Bowl Gouges
$69.99

Robert Sorby bowl gouges are a must in the tool kit of every bowl turner.Throughout the world, the name Robert Sorby is synonymous with all that is good in woodturning and Robert Sorby turning tools remain the benchmark by which all others are judged. Robert Sorby bowl gouges are a must in the tool kit of every bowl turner. Milled from round bar, giving both mass and stability. These tools are ideal for making bowls. They can produce either massive profiling cuts or delicate cuts as necessary.

Robert Sorby Square-End Scraper

Robert Sorby Square-End Scraper
$69.99

For finishing convex and flat bottomed forms.For finishing convex and flat bottomed forms. The end profile can be modified to a specific shape as required, e.g. diamond point.

Sorby Sandmaster

Sorby Sandmaster
$68.99

An extremely handy addition to any turner's armory, the Sandmaster is used in conjunction with a lathe to put a fine finish on turned pieces. It eliminates the unsightly lines often associated with traditional hand sanding.As the disc is spinning it also reduces the clogging of the abrasive. The Sandmaster comes complete with a hook-and-loop covered 2" sponge pad which allows for the easy changing of abrasive discs. A variety of grits - from 60 - 400 - of aluminum oxide disc can then be quickly attached.The adjustable head which runs on a durable phosphor bronze bushing lets the turner reach even the more inaccessible spots. As an optional extra, a 3" head and discs can be easily fitted for greater efficiency. The Sandmaster becomes an even more versatile tool when the head is removed and replaced by a pigtail mandrel and goblet or bowl mop. Made of fine grade cotton these mops are an ideal medium for buffing waxes and other finishes.Maintenance and use instructions for the Sandmaster.Technical Details:Overall Length: 11-1/2"Handle Length: 8-1/2"

Multi-Jig SVS-50 for Tormek T-7 Sharpening System

Multi-Jig SVS-50 for Tormek T-7 Sharpening System
$68.00

Use the Multi-Jig SVS-50 Sharpening System Jig with your Tormek T-7 or T-3 to sharpen turning skew chisels, straight or radiused edge parting and beading tools and roughing gouges. Straight carving gouges up to 2" width.Technical Details:For turning skew chisels, straight or radiused edge parting and beading tools and roughing gouges Best Used With:Tormek T-7 Sharpening System.Click Here to View Instructions:

Pages: first pageprev page1 2 3 4 5 6 7 8 9 10next pagelast page