Save time by quickly shaping high speed steel tools on your bench grinder and transitioning easily to honing on your Tormek with this micro adjustable grinder mount. Tormek jigs simply slide off the grinder mount and onto your Tormek when you're ready to hone. Installs on the left or right side of bench grinders with wheels 6"- 10" in diameter when you provide a mounting block. Included handbook provides instruction on how to shape and hone woodturning tools as well as a guide to build the mounting block to fit your grinder. Universal support with micro-adjust, mounting base, eight mounting screws, eight washers and four rubber feet included.Technical Details:Allows you to use your bench grinder for shaping with the Tormek sharpening systemAllows you to use Tormek jigs with your bench grinderWith or without Tormek machine you can still benefit from the precise Tormek jig system on your bench grinder and easily get the desired shape and edge angleThe principle for setting the shape and edge angle is the same regardless of whether you use a Tormek Sharpening System or your Bench Mount GrinderThe principle for setting the shape and edge angle is the same regardless of which machine you useOPTIONAL ACCESSORIES :18772 - Universal Gouge Jig (SVD-185)60483 - Tool Rest (SVD-110)37592 - Multi-Jig (SVS-50)24201 - Tormek Turning Tool Setter (TTS-100)
This scaled-down, free-spinning inertia sander is your ticket to smoothing hard-to-reachareas in delicate bowls, vases, and other hollow turnings. Includes a fullyadjustable head, eight versatile adhesives, and a modular aluminum handle thataccepts a wide range of blades and other turning attachments.Position the fully-adjustable head at any angle to sand under lips, inside walls, andother hard-to-reach areas. The 1" diameter, foam-backed hook-and-loop sanding padaccepts a wide range of available adhesives.As part of the Robert Sorby modular micro tool system, the included handle acceptsall other Sorby Micro attachments, including blades, gouges, and decorativeapplicators. See offers for the Spiraling Set, Spindle Set, and Hollowing Set fordetails.Micro Sandmaster Complete Set includes:Anodized aluminum handle (5-3/4" long) Micro Sandmaster head1" foam pad(2) 120 grit abrasive discs(2) 180 grit abrasive discs(2) 240 grit abrasive discs(2) 400 grit abrasive discs(2) allen wrenchesInstruction leaflet
With just one Diamond Wave Sharpener, you can now properly maintain the cutting edges on a wide range of curved cutting tools, such as in-cannel and out-cannel gouges, carving tools and wood turning tools. The uniquely designed Diamond Wave features a variable radius from 0.0625" to 1", accommodating all curved gouges, and it's the first diamond sharpener to combine convex and concave abrasive surfaces. It's easy to use - just slide the tool along the wave to match the radius, then sharpen with short back and forth strokes. Fine Grit: 600-mesh/25-micron. Made in USA.
At 2'' wide x 6'' long, these diamond abrasive bench stones are big enough for most knives, chisels and smaller planes. EZE-Lap diamond stones combine the highest quality industrial-grade diamond particles with a stainless alloy that is bonded to a precision matched metal substrate. The resulting sharpening surface measures about 72 on the Rockwell C hardness scale, and works with carbide, ceramic, tool steel, hardened materials and the newer stainless steels. This process produces top quality diamond abrasives at the lowest possible price. They are flat, extremely durable, and turn out consistently sharp edges with excellent finish quality. Includes non-skid rubber mat. Use for hunting and fishing knives, kitchen knives, woodworking tools, exacto blades, axes and moreDouble-sided—just flip the stone to change gradesFlat surface doesn't wear away—no need to reflatten the stonesLong-lasting, durable diamond abrasiveMade in USA
The iVac Pro system eliminates the inconvenience of having to walk across the shop to turn on your dust collection system before operating a power tool. It also eliminates the chance that you will simply forego the dust collector to save a bit of time. Simply turn on your power tool and the Pro Tool Plus sends a wireless signal up to 40' to the Pro Switch (sold separately), which then powers up your dust collection system. Turn off your power tool, and the dust collector powers down. Here's how it works. The Pro Tool Plus is physically secured to the power cord of your power tool, and determines whether the tool is on or off by sensing the magnetic field surrounding the cord. Now plug your dust collection system into a Pro Switch (sold separately). In Auto Mode, when the power tool is turned on, the Tool Plus transmits a digital wireless signal to the Pro Switch instructing it to turn on and apply power to the Dust Collector. You can add a Pro Tool Plus to every tool that you want to have this capability. One Pro Switch can accommodate up to 8 Pro Tools, as long as they are within the 40' radio frequency range. You can even program your Pro Switch to run a little longer than your tool to allow for dust clearance. Get started today by selecting a Pro Switch in 240V or 115V and adding up to 8 Pro Tool Plus units. NOTE: IVac Pro System Boxes are built to handle the amperage advertised, however, both the UL (American) and CSA (Canadian) safety approval agencies require the boxes to be labeled at 80% of their actual amperage capacity due to the fact that the units have an attached power supply cord. Example - The 115 Volt / 20 Amp box is labeled as only 16 amps, however the box will actually continuously handle 20 amp AC mains. Automatically turns your dust collection system on or offWirelessly connect up to eight iVac Pro Tool Plus units (each sold separately) to an iVac Pro Switch for multi-tool coverageRun two or more power tools at the same time without interference (turning off one tool won't turn your dust collection system off if another tool is still runningTurn on delay helps avoid power surges from dust collector and power tool turning on at the same timeThree-position mode switch: Auto/Off/On40' line-of-sight range between the iVac Pro Switch and iVac Pro Tool Plus
A delicately balanced tool essential to the spindle turners kit.Delicately balanced tools that are the planes of the spindle turners kit. Designed at Robert Sorby, the profile allows the tool to glide effortlessly along the tool rest without fear of the edges dragging on the rest. They will smooth cylinders, clean the end grain of spindles, cut shallow curves, beads, pummels and v-cuts, e.g. stair balustrade and chair legs. These tools are indispensable if a fine finish is required from the tool.
Specifically produced for turners who understand the nuances of the craft, these are detailing tools used on between-center work, where the grain is running parallel to the bed bars. They are used to create coves, beads and other profiles on goblets, vases and egg cups.
With a durable aluminum handle and three interchangeable blades,this modular setquickly transitions from one turning tool to the next. Perfect for pen turning andother small spindle work! It includes a 1/2" gouge, 1/4" skew and 5/32"beading/parting tool to produce beautiful, intricate pieces. For those who alreadyown the handle, each blade is also available individually.As part of the Robert Sorby modular micro tool system, the included handle acceptsall other Sorby Micro attachments. See offers for the Spiraling Set, the Hollowing Set, and the Sandmaster Set, and for details.Includes:Aluminum handle (5-3/4" long) All-purpose gouge blade (1/2" W)Skew blade (1/4" W)Beading and parting blade (5/32" W)(2) allen wrenchesInstruction leaflet
It beads, coves, planes, trims end grain and much more!The Spindlemaster is ideal for small projects like boxes and rattles, and works just as effectively on large pieces like bedposts and staircase spindles. If you have reservations about using a skew chisel, the Spindlemaster is the answer.
Bench brackets let you turn unused space into functional outdoor furniture with much less measuring, cutting and fitting than making them from scratch. Use for new installations or retrofit onto existing deck or dock or make a short bench on one side of your deck or use as a railing with integrated seating around the entire perimeter - just add 2x4's and 2x6's.Technical Details:Simple assembly using basic tools.Bracket measures 23" high x 19" wide x 3" thick.Two brackets per kit.Space bench brackets no more than 24" apart and 12" from the ends of the bench.Includes ACQ treated lumber-resistant mounting hardware and instructions.Bracket made of durable, maintenance-free resin.10-year warranty.Sand color.
For fine, chip-free crosscuts with minimal saw marks, turn to the Irwin Marples 60T Fine Crosscutting Saw Blade. Whether mounted on a miter saw or in a table saw, the razor-sharp carbide teeth and ATB+R grind will produce excellent cuts in hard and soft woods. The unique raker tooth design allows for perfectly flat-bottomed cuts in grooving applications. The blade also features a thin kerf design, which reduces dust and material waste, and allows for use on all table saws, from lower-powered portable machines to high-end cabinet saws. IRWIN is proud to introduce a full line of fine woodworking saw blades that are manufactured in Italy to the highest standards of precision required for fine woodworking and finish carpentry. These industry leading laser-cut, thin kerf saw blades are produced in a highly-automated, state-of-the-art facility in Udine, Italy - the heart of high-quality circular saw blade manufacturing. Engineered with oversized, high-quality carbide, the new Marples Woodworking Series saw blades provide the extended life and flawless finish professional woodworkers and finish carpenters demand.Technical Details:Extra-sharp, oversized carbide teeth are re-sharpenable for long life.Precision tensioned for flawless cuts.Heat-resistant non-stick coating reduces gumming for easy cleanup and truer, cleaner cuts.Diameter: 10".Tooth Count: 60.Grind: ATB+R. Kerf: 0.098"/2.5mm. ATB Angle: 10°. Arbor Size: 5/8".Tool to be Used On: Table Saw, Miter Saw.
Standard Parting Tool - Used to part the finished project off from the waste material, the parallel sides make for a rigid tool that handles well. The 1/8" -3mm tool reduces the amount of waste, vital if the timber is an expensive, exotic one. It also makes for a fine detailing tool, e.g. beads and fillets.Diamond Parting Tool - The special profile of this tool reduces the risk of binding in the cut. It also reduces the amount of heat build up caused by friction, thereby lessening the chance of burning the bottom of the parted project.
Turn your Nova Comet II Midi Lathe into an all-purpose grinder and sharpener! The Versaturn Grinding Wheel includes a 6" white-stone wheel that, together with the Comet's variable speed adjustment, enables you to sharpen your turning tools and perform routine grinding without the burning often experienced with standard bench grinders. Mounting the grinding wheel requires the Versaturn Coupler (48026, sold separately), which allows installation and removal with an easy 1/4 turn of the locking collar. Includes metal shroud, swiveling safety shield and tool rest. For use with the Nova Comet II Midi Lathe (46457, sold separately).Easy to install and remove with the required Versaturn Coupler (48026, sold separately).Variable speed adjustment on Comet II Lathe reduces tool edge burn.6" x 3/4" white-stone wheel. Adjustable tool rest.Swiveling transparent safety shield.Metal safety shroud contains dust and sparks.
Eliminate the unsafe distraction of turning on and off your dust collection system while you're operating a shop tool! The iVac Pro consists of two main components, the Pro Switch (Sold Separately) and the Pro Tool, both sold separately in your choice of 240V or 115V. A complete iVac Pro System gives you wireless control of your dust collection system, automatically turning it on/off every time you turn on/off one of your shop tools.Here is how it works: plug your dust collection system into a Pro Switch. Now add a Pro Tool for every shop tool you want to automatically activate your dust collection system. One Pro Switch can accommodate up to 8 Pro Tools, as long as they are within the 40' radio frequency range, making it possible to run your dust collection system only when you run your tools! And running more than one tool at the same time won't cause interference; the Pro Switch won't turn your dust collection system off until the last Pro Tool in your system is shut off. You can even program your Pro Switch to run a little longer than your tool to allow for dust clearance. So get started today by selecting a Pro Switch in 240V or 115V and adding up to 8 Pro Tools.NOTE: IVac Pro System Boxes are built to handle the amperage advertised, however, both the UL (American) and CSA (Canadian) safety approval agencies require the boxes to be labeled at 80% of their actual amperage capacity due to the fact that the units have an attached power supply cord. Example - The 115 Volt / 20 Amp box is labeled as only 16 amps, however the box will actually continuously handle 20 amp AC mains.
Excellent grip, superb balance and rugged construction give the Robert Sorby Sovereign Handles superior control and stability for the most challenging turnings. Just add your favorite shaft and cutter for a turning tool like no other. The Sovereign handle accepts a 5/8" diameter turning shank out of the box, and will accept the TurnMaster line of shanks when used with the 1/2" collet (47155, sold separately). A tang collet and a 3/8" collet are also available. The aluminum ends on all Sovereign models thread off, and a Threaded Coupler is available so that two handles can be combined for extra length. An accessory Counterweight can also be attached when additional weight is desired for balance at the butt end of the handle. The 16" and 22" models also have a tapped hole on the side, which accepts an accessory Side Handle - very useful for rotational control with large turnings.Technical Details:Steel core for strength and vibration-dampening.Knurled aluminum ends for corrosion resistance and balance.Core is hollow, allowing shank to be inserted to deepest possible depth, reducing flexing and chatter.Durable Softex grip for extra comfort.Hex-head set screws are capped with brass to prevent damage to your turning tools.All handles will take turning chisels with a 5/8" diameter shaft.3/8", 1/2" and Tang collets are available separately to accept a wide variety of turning tool shanks. (Note: American-made tools are measured by bar diameter while European brands are measured by flute size. So the 3/8" collet is designed for a European 1/4" gouge, the 1/2" collet for a European 3/8" gouge, and a European 1/2" gouge will fit directly into the Sovereign handle).Use the 1/2" collet (47155, sold separately) for the TurnMaster shanks (e.g. 45649, sold separately).For extra weight at the butt end, when used with very large chisels, for example, the Sovereign Counterweight (20541, sold separately) can be inserted inside the handle.When additional rotational control is required, the Sovereign Side Handle (30744, sold separately) can be attached to the 16" and 22" models.The Threaded Coupler (26168, sold separately) can be used to join any two Sovereign Handles for extra length.
Improve the freehand sharpening on the top and underside of your grinding wheel with the Tormke Work Sharp WS3000 Tool Bar Attachment! Designed to accept a wide range of Tormek or Jet sharpening jigs (Sold Separately) for turning tools and carving tools. Fits all WS3000 tools, installs quickly and doesn't interfere with other attachments or operations of the tool. Cast metal bracket and a steel tool bar are rigid and provide a stable platform for freehand sharpening or the use of sharpening jigs. Micro-Adjust Nut provides precise Tool Bar positioning and repeatability. Provided Set Up Fixture creates consistent and repeatable tool set ups for fast and easy sharpening results. Coarse P80 grit abrasive included for shaping and sharpening tools.Note: Gouge Sharpening application pictured shows Short Tool Jig 27774 (Sold separately)