Pages: first pageprev page1 2 3 4 5 6 7 8 9 10next pagelast page

Rockler Cove Cutting Table Saw Jig

Rockler Cove Cutting Table Saw Jig
$89.99

Cut custom coves on your table saw without juggling all those fences and clamps! This jig includes everything you need for safe, easy coving in one easy-to-use package. Accepts stock up to 7" wide and 1-1/2" thick, enabling you to cut huge crown moldings that would cost a fortune from the lumberyard. Try angling the blade for a truly unique shape. Ingenious clamping system secures the fences using the 3/4" miter slots on the saw table. Large, easy grip knobs make for quick, tool-free setups. Included featherboard kit holds stock firmly to the table for added safety, precision and repeatability.

Rockler Ellipse/Circle Router Jig

Rockler Ellipse/Circle Router Jig
$89.99

The Rockler Ellipse/Circle Router Jig lets you cut circles and ellipse shapes over a wide range of dimensions and proportions. With your router and this handy, easy-to-use jig, you'll be able to make picture frames, mirrors, signs, tabletops and more in just a matter of minutes. Compare to other ellipse/circle router jigs that cost $100 more. Set up takes only a couple of minutes and is virtually math-free. Using the jig is just as easy. As you move the router through the cut, the jig's sliding dovetail mechanism keeps the router precisely on the cut line. Designed for use with just about any plunge router. Minimum circle diameter 9-1/4"Maximum length for major axis is 52".Maximum difference between minor and major axis is 8".Minimum difference between minor and major axis is 3-1/2"Includes jig arm, jig base, two dovetail keys, and two locking pivots.Single pivot can be locked to make circles up to 52" diameter.Pre-drilled for Porter-Cable 693/893 routers or routers with 6" base footprints.Made from 1/4" thick phenolic for durability.

Bosch Plunge Base for Colt Palm Router (PR011)

Bosch Plunge Base for Colt Palm Router (PR011)
$89.99

Owner's of the Bosch Colt have been eagerly holding their horses for the new Bosch PR011 Plunge Base, and now it's here. Offering extraordinarily smooth plunge action with easy, micro-fine depth adjustments, the PR011 also features a rotating 7-step turret-style depth stop with two adjustable stops. The plunge lock lever is easy to access near the left handle. The PR011 includes a clear sub-base that provides excellent visibility, and features a precision centering system that makes it easy to center the sub-base in relation to the bit when using jigs and templates.

VRS Vacuum and Router Support for the Leigh Dovetail Jigs

VRS Vacuum and Router Support for the Leigh Dovetail Jigs
$86.00

Leigh's NEW VRS system (Vacuum and Router Support) will make your dovetail routing a dust-free experience. The vacuum chute is easily attached to any Leigh jig and glides effortlessly from side to side on nylon rollers. It automatically follows the router when routing the joint or when the router is parked off to the side, which means it's always in the perfect position to catch the chips. Each VRS comes complete with two adaptors to fit all popular vacuum hose sizes from 1" to 2-1/2". Can be used with a small shop vac or large built in system. Comes complete with all mounting hardware needed for any Leigh 24" D Series jig or the Leigh D1600.Standard Equipment:Router Support BeamVacuum chuteHose adaptor smallHose adaptor largeSupport railsFinger assembly support brackets where requiredScrews & washersHex keyFeatures:Full width router supportVacuum box glides effortlessly under router support beamControl arms position vacuum boxControl arms adjust to any routerEasy on Easy Off. Powerful rare earth magnets secure router support beamNo hoses to obstruct viewAll mounting hardware includedAdapt to any hose size

Self Centering Doweling Jig for Thick Timbers

Self Centering Doweling Jig for Thick Timbers
$84.99

Great for large jobs such as swing sets and outdoor structures! Opens to a full 6" . Precisely aligned guides for five permanent holes including 1/4" , 5/16" , 3/8" , 7/16" , and 1/2".

Through Dovetail and Box Joint Template

Through Dovetail and Box Joint Template
$84.99

Install this template in the 4210 Porter-Cable 12" Dovetail Jig (21814, sold separately) for easy, precise routing of through dovetails and box joints. Template includes a template guide, a dovetail bit, a lock nut, a wrench for installation and an instruction manual. Box joints require a 1/4" straight bit, sold separately.

Rockler Pro Shelf Drilling Jig

Rockler Pro Shelf Drilling Jig
$84.99

Just lay the jig on your stock, tighten the two horizontal tracking knobs and start drilling error-free rows.Guarantees each row is perfectly in lineSpaces each hole exactly 37mm from the edge of your stockJig is easy to set up and easy to adjust for multiple rowsRows are spaced exactly 1-1/4" (32mm) apartPin holes are set back exactly 1-7/16" (37mm) from each edge32mm spacing and 37mm setback are fully compatible with the Euro hinge system24" long twin template tracks are joined by rigid rails that lock in place for error-free drillingDrill two rows with one jig to save time and ensure accuracyLocking 3-star tracking knobs allow for adjustments and ensure the jig stays firmly in placeReversible guide rails have a smooth aluminum surface on one side and a rubber fence on the other for better gripping powerIncludes two 5mm and two 1/4" indexing pins that eliminate the need for clamps and allow you to extend long rows of holes indefinitelyIncluded indexing pins store conveniently in the ends of each guide rail when not in useDrilling template is made of thick acrylic for durabilityDesigned for un-assembled cabinet components from 8-1/4"W to 25-1/4"W Self-Centering Drill Bits:Self-centering bits are pre-set to bore a consistent depth for perfect fitting shelf pins and sleeves every time. No adjustments are necessary! Various bit sizes available separately for both shelf pins and shelf pin sleeves. Decorative metal shelf pin sleeves provided added shelf strength.#40604 - 1/4'' Bit for 1/4'' Shelf Pin#40608 - 5mm Bit for 5mm Shelf Pin#41983 - 9/32'' Bit for 1/4'' Shelf Pin Sleeve#41981 - 7/32'' Bit for 5mm Shelf Pin Sleeve

Rockler Router Table Spline Jig

Rockler Router Table Spline Jig
$79.99

Dress up your mitered corner joints and add strength, too, with the Rockler Router Table Spline Jig! This clever jig locks into a standard router table miter slot and features a sled that holds your workpiece at a 45° angle while you guide it smoothly past the router bit. The adjustable fences act as stops to position your workpiece-one setting can cut all four slots for a frame, or eight slots for a box. Try different router bits to achieve different effects-straight bits, V-groove bits, dovetail bits and more! For larger boxes and chests see our Large Box Spline Jig (55153, sold separately), which is clamped to the outside corners of your box and used with a handheld router. Capable of accommodating a frame with a standard 11'' x 14'' opening, or a box measuring up to 12'' x 12'' x 12''Smooth-sliding tracks ensure accurate cuts and ease of useIncludes centering tool, which aligns the jig with the center of the router bit; stores onboardCentering line on sled aligns the bit with your cut lineTaller fences can be added to stock ABS fences to stabilize larger framesFences are removable to accommodate taller boxesWorkpiece can be clamped to sled if additional support is neededAll adjustments are achieved with tool-free knobsMDF base with durable ABS sledFits standard 3/8'' x 3/4'' miter slotInstructions includedFits router tables on which center of miter track is between3-1/4'' and 6-7/8'' from center of the bit.

Rockler Router Table Box Joint Jig

Rockler Router Table Box Joint Jig
$79.99

For use on virtually any router table with a standard 3/4" miter slot, this jig features a smooth-sliding backer sled and three precision-machined aluminum indexing keys to give you air-tight joints with either 1/4", 3/8" or 1/2" spacing. Works with stock up to 3/4" thick. For compatibility, the near edge of your table's miter track must be between 4-1/2" and 6-1/4" from the center of the bit.Stable MDF platform has low-friction melamine coating for added durability and easy cleanup.ABS plastic backer sled provides ample support, and is also predrilled for a sacrificial faceEasy-grip knobs lock platform into miter slotPlatform measures 10-3/4" x 12-3/8" x 1/2"Includes all necessary mounting hardwareThe jig requires a straight router bit to match the size of the indexing key.Up-cut spiral bits deliver the cleanest cuts and prevent blowout.

Micro Jig GRR-Ripper Advanced 3D Push Block System GR-200

Micro Jig GRR-Ripper Advanced 3D Push Block System GR-200
$79.99

This advanced model of the GRR-Ripper boasts all of the same innovative features of the GR-100 but comes with two additional accessories (see below) that improve the control and expandability of the GRR-Ripper System. The Micro Jig GRR-Ripper Advanced 3D Pushblock (GR-200) is designed to feed your workpiece more safely and more accurately than with conventional push blocks, resulting in intact fingers, less burning and less waste. With its 3-Directional control, it gives you downward, forward, and lateral pressure on the stock for maximum control. Since it acts as a movable blade guard that travels with your hand, it provides an additional safety buffer between the blade and your hands. Whether you are making razor-thin veneer strips, building miniatures, or creating exquisite furniture you will save time, materials, and fingers with the GRR-Ripper.The GR-200 includes these additional accessories:The Adjustable Spacer - This accessory adds increased gripping surface for tackling larger stock. It also adds one inch of cutting width to the GRR-Ripper and acts as a secondary balance support for small stock and straight-line ripping. Great add-on for working on the router table, and eliminating snipe.The Stabilizing Plate - The Stabilizing Plate adds a new dimension of control to the GRR-Ripper. It is particularly useful when cutting small narrow pieces of stock. Perfect for trickier cuts like resawing, bevel edging, pattern routing, and much more.The Stabilizing Plate also acts as a secondary fence that travels with the GRR-Ripper along the left side of the stock. It holds the off-cut piece in its original position through the entire cutting operation. Some users call it a "Feather Board Plate," but unlike a featherboard, it exerts no sideways pressure. Instead it simply holds the drop-off piece in position as it travels past the blade, preventing binding.Watch a video demo today by clicking on the "Videos" tab above.

Kreg Jig HD Heavy-Duty Pocket Hole System With Free 125 Pack of Screws

Kreg Jig HD Heavy-Duty Pocket Hole System With Free 125 Pack of Screws
$79.98

Go BIG with the Kreg Jig HD Heavy-Duty Pocket Hole Jig-a supersized, industrial-strength Kreg Jig optimized for working with 2x4 stock and larger. With all of the famed speed of the original Kreg Jig, along with robust joints that are 50% stronger, and big 2-1/2" weather coated #14 screws, the Kreg Jig HD makes a simple, strong joinery system for wall framing, deck railing, outdoor furniture, gazebos, swings, fences, trellises and anything else that will need to stand the test of time and the elements. The Kreg Jig HD is extremely portable for job-site use, simply slip your Kreg Face Clamp (#26613 sold separately), into the jig and lock it into place for a one-piece system. Or, if you'd like to use it in the shop, you can also slip it into the benchtop base of the Kreg K3 and K4 jigs (#27204 sold separately) for upright drilling.

Kreg Deck Jig System

Kreg Deck Jig System
$79.00

The best helper you'll ever have for building decks, fencing and more! This jig guides you as you drill and drive deck screws at the optimal angle to achieve concealed fastening of deck boards. No more exposed nails or screws! An easy grip handle and 90° alignment tab make setup extremely easy. The onboard drilling jig is preset at the optimal angles for straight-on as well as left and right corner fastening. Simply drill your holes with the included bit and drive the deck screws with the included square drive bit. Spacer rings are included to ensure uniform, accurate spacing of deck boards.Additional Features:Includes the Deck Jig, 6" drill bit, 6" KTX square driver bit, 100 Protec-Kote deck screws, three 5/16" spacer rings, three 1/4" spacer rings, two stop collars, allen wrench, instructional DVD and durable carrying case.For stock from 3/4" to 1-1/8" thick.

Rockler Taper / Straight Line Jig

Rockler Taper / Straight Line Jig
$77.99

With a simple indexed angle setting system, heavy duty hold-down clamps and a smooth sliding design, it makes tapered cuts fast, easy and more precise. Perfect for chair legs, table legs and more. Jig fits snug in any standard 3/8" x 3/4" miter slot and features a large, ergonomic handle for smooth push-action performance throughout the cut. Plus, with the miter bar removed it doubles as a stable straight line ripping jig. Measures 31-5/8" x 7-3/4".Constructed of 1/2" thick MDF.Includes 36" miter bar.Indexing marks make angle setting easy - each mark represents 1° of taper.Dual tape measures provide convenient reference and also help set angles.Two wide-body hold down clamps prevent stock from drifting dangerously from your fence.Clamps have non-marring rubber caps for enhanced grip.Three adhesive strips run across the jig to help stabilize your workpiece.With taper angle zeroed out, jig works great to rip straight edges on rough lumber.

Magswitch Workholding System Starter Kit

Magswitch Workholding System Starter Kit
$76.99

The Starter Kit is the practical way to get started in the Magswitch Workholding System! Complete with Universal Base, Two Mag-Jig 150s and the Reversible Featherboard. The Starter Kit features a reversible featherboard attachment that mounts to the base and can be used on either side of the blade. The two Mag-Jig 150s are removable and can also be used in your own jigs and fixtures.Holds stock for controlled ripping, routing, shaping, jointing and moreFast setups with precise positioningSmall footprint makes it ideal for use with small tables, band saws and fencesCan be used anywhere on your table or fence (steel or cast iron)Accepts all Magswitch Workholding System accessories expandable system gives you a multitude of shop possibilitiesMagswitch Vertical Featherboard Attachment w/Risers is recommended to add a dimension of dual work hold (sold separately)Best Used With:Universal Track for Magswitch Workholding SystemMagswitch Ultimate Thin Stock Jig/Rip Guide AttachmentMagswitch Dual Roller Guide AttachmentMagswitch Resaw Guide AttachmentVertical Featherboard Attachment w/Risers

Tormek to Wolverine Adapter/Mount Kit for Bench Grinders (OWC-200)

Tormek to Wolverine Adapter/Mount Kit for Bench Grinders (OWC-200)
$76.00

With this adapter set, owners of the Oneway Wolverine Grinding Jig (24707, sold separately) and an ordinary bench grinder can now enjoy the precision and versatility of a wide range of Tormek sharpening jigs. Simply slide the adapter onto the bar stock of the Wolverine jig and tighten the knob. The included Tormek Universal Support then attaches to the adapter, allowing you to slide on a variety of aftermarket Tormek jigs. Allows you to use Tormek jigs with an ordinary bench grinder and the Oneway Wolverine Grinding Jig (24707, sold separately)Installs on the left or right side of bench grinders with wheels 6''- 10'' in diameterCan also be installed directly to the bench without the Wolverine Grinding JigWith or without a Tormek sharpener, you can still benefit from the precise Tormek jig system on your bench grinder-the principle for setting the shape and edge angle is the sameIncluded handbook provides instruction on how to shape and hone woodturning tools

Complete Doweling Kit

Complete Doweling Kit
$74.99

Choose from Self-Centering Doweling Jig or Complete Doweling Kit with glue and dowel pins.Technical Details:Self Centering Doweling Jig (49221):Maximum 2" capacity with boring sizes: 3/16", 1/4", 5/16", 3/8", 7/16" and 1/2".Plated to prevent rust.Complete Doweling Kit (10488) Includes:(1) Self Centering Doweling Jig (49221)(1) pint of Titebond glue(100) 1/4" x 1-1/2" dowels (100) 3/8" x 1-1/2" dowels(50) 3/8" x 2" dowels(50) 5/16" x 2" dowels(2) each of the following nickel plated dowel centers: 1/4", 5/16", 3/8" and 1/2".

Oneway Wolverine Vari-Grind 2 Jig

Oneway Wolverine Vari-Grind 2 Jig
$74.99

With the Oneway Wolverine Vari-Grind 2, you can now create and maintain true fingernail and side grind profiles on your spindle and bowl gouges quickly, at any angle. Oneway's patented pivot point keeps your gouges moving in a true cylindrical pattern about the adjusting rod, creating a conical cutting edge, while the side-to-side motion of the tool is restrained so that the tool cannot slip off the side of the wheel. The beautifully engineered clamping mechanism keeps your gouges firmly in place for the finest final polish and a razor sharp edge. Designed to be used with the Oneway Wolverine Grinding Jig Base (24707 Sold Separately). Includes instructional DVD.

Complete Doweling Jig Kit

Complete Doweling Jig Kit
$71.99

Includes all three of our jigs - 1/4", 3/8" and 1/2" - complete with the corresponding drill bits, stop collars, and a hardshell case. Rockler Doweling Jigs are transparent - just set the two parts together, strike a line across the face of the joint, then line up the jig. The transparent face lets you align the reference lines with your pencil marks perfectly. Made to last with 3/16" acrylic faces and hardened steel drill guides. Delivers a quick joint setup in just a moment of time.No need to transfer marks from the face to the edge, or measure and mark with a tape measure.Simply set your two parts together, strike a line across the face of the joint and line up the jig.Made to last with a 3/16" thick acrylic face.Hardened steel drill guide will endure years of abuse.Each jig has a convenient hanging hole.Precise centerline for the joint, plus center lines for two dowels.1/4" jig has holes spaced 3/4"-on-center.1/4" jig is designed to center dowel holes on 1/2" thick stock. 3/8" jig has holes spaced 3/4" on center.3/8" jig is designed to center dowel holes on 3/4"thick stock. 1/2" jig has holes spaced 1"-on-center.1/2" jig is designed to center dowel holes on 1" thick stock.

Pages: first pageprev page1 2 3 4 5 6 7 8 9 10next pagelast page