Pages: first pageprev page4 5 6 7 8 9 10 11 12 13next pagelast page

Rockler Perfect Fit Dado Jig

Rockler Perfect Fit Dado Jig
$44.99

The conventional solution for cutting tight-fitting dados for plywood is to buy a set of expensive undersized bits, but this jig lets you do it for a wide range of thicknesses with just one ordinary 1/2'' bit! It is designed to fit into the channel of our All-In-One Low-Profile Contractor Clamps (e.g. 32777, sold separately) for ultra-straight cuts. With its unique dual-pass method, the smooth-sliding Perfect Fit Dado Jig cuts tight-fitting dadoes for stock from 5/8'' to 1'' thick, and it's infinitely adjustable within that range. It's perfect for plywood that is thinner than the nominal thickness, and for lumber that's been planed to an odd size. Operation is simple! Once you've set your thickness with the scale, just run the first shoulder of the dado with one edge of the jig up against any straight edge, then flip the jig around and run the other shoulder. The result is a tailor-cut dado that fits like no other. Once the jig is set, you can machine all your dadoes for that thickness without having to reset the jig. Though it can work with any straight edge, the Perfect Fit Dado Jig is designed to fit into the channel of our All-In-One Low-Profile Contractor Clamps (e.g. 32777, sold separately). This ensures that the jig does not wander from the straight edge. To buy the jig together with a 50'' All-In-One guide and Squaring Attachment see our package deal 50692 (sold separately). Scale is calibrated for use with a 1/2'' straight bitAny straight bit can be used, but the user will have to account for the different offset from the edge of the dado sled. This means you can use a 3/8'' straight bit for 1/2'' dados, or a 3/4'' straight bit for wider dadosHooked channels interface neatly with our All-In-One Low-Profile Contractor Clamp (e.g. 32777, sold separately)Capable of working with any straight edge by butting directly against the edge rather than hookingKnurled knobs and laser-etched scales make it easy to adjust the offset for the second shoulder of your dadoMade of sturdy, low-friction ABSPre-drilled to fit most routers with a standard 3-hole pattern, and can be easily drilled to fit any router. Fits the following router models without the need to modify: Makita 1100; Milwaukee 5615-5624; DeWalt 616-618; Bosch MRC23 Series, 1617-1618; Ridgid 2930 Combo Kit; Hitachi M12VC (fixed and kit); Porter-Cable 690, 890, 7529, 97529 and 8529. Includes detailed instructionsMade in USA

Kreg Micro Pocket Drill Guide

Kreg Micro Pocket Drill Guide
$44.95

Pocket holes and pocket screws are great for joining work pieces, but sometimes standard pocket holes are simply too big (on thin stock, picture frames, small drawerboxes, etc.). When that's the case this miniature drill guide is ideal. It has a 25% smaller hole diameter and includes a Micro Pocket Drill Guide, Drill Bit and Depth Collar, as well as a Starter Screw Set. Replacement accessories sold separately.Technical Details:Compatible with the Kreg Jig and Kreg K3 Jig K4, and K5 Master System.Reduced width lets you drill two holes across extremely narrow stock, down to 1" wide, creating a much stronger joint in narrow pieces.Screw heads seat well below material surface in thin stock, perfect for creating fully pluggable pocket holes in 1/2" thick material like drawer boxes.Includes the Micro Pocket Drill Guide, Micro Pocket Drill Bit, Micro Pocket Depth Collar and Starter Screw Set.

Rockler Shutter Louver Router Bits - 1/2" Shank

Rockler Shutter Louver Router Bits - 1/2" Shank
$41.99

Use our Louver Router Bits to create your own shutter louvers in 2-1/2" or 3-1/2" widths. The louvers interface seamless with other elements of the Rockler Shutter System. The included ball-bearing guide runs along the middle of the shutter slat-just rout one side, then turn the slat around to rout the other side. 1/2" shanks ensure a smooth chatter-free cut.To learn how you can build your custom shutters with ease, view all of our Rockler Shutter Jig Templates and select the style that is perfect for your application.

Rockler Router Guide Bushing Kit

Rockler Router Guide Bushing Kit
$41.99

Our 11-piece template guide kit will work with any template, pattern or jig for perfect duplicate routing. Ideal for stair, pattern and hinge routing, dovetailing and craft/hobby work. Fits any base with a 1-3/16" diameter center hole.Also available from Rockler, the Guide Bushing Router Plate (sold separately). Affordably priced and designed with maximum utility in mind, this router plate features a 1-1/4" center opening to accept guide bushings and a ring of external mounting holes which forms multiple patterns to allow attachment to most popular routers. Six additional holes are dispersed evenly around the center to provide an escape for routing debris.

Minifix JIG IT Template

Minifix JIG IT Template
$41.99

Marking and drilling guide for Minifix fasteners.An easy-to-use marking and drilling guide for fasteners.Mark location of cam holes with a center punch Includes drill guide bushing for drilling 8mm horizontal hole.Includes clamp and drill guide.

Concealed Soss Hinges-Satin Nickel Finish

Concealed Soss Hinges-Satin Nickel Finish
$40.99

Elegant and durable, Soss invisible hinges are completely concealed when the cabinet door is closed. Available in Black, Satin Nickel and Satin Brass finishes.Soss hinges require mortises in the door and door stile for installation.Designed for use with inset doors.Wings on #35294 measure 3/8" W x 1- 11/16" L. (Minimum wood thickness: 1/2" ).Wings on #36991 measure 1/2" W x 2-3/8" L. (Minimum wood thickness: 3/4" ).Best used with the Soss Routing Jig (Sold Separately). Designed to ensure accurate hinge mortises.

Micro Jig Splitter SteelPRO System, Thin Kerf

Micro Jig Splitter SteelPRO System, Thin Kerf
$39.99

Micro Jig Splitter SteelPro is constructed from a 100% polycarbonate shell and reinforced with a solid stainless steel core. The SteelPRO employs another groundbreaking innovation for table saw safety and efficacy: The Dual Splitter. This allows the splitters to control the pressure on the keeper piece AND the off-cut piece by the thousands on an inch. This will virtually eliminate any chance of kickback on the table saw and greatly reduce the chance of severing fingers. For Thin Kerf, range of 0.090"-0.118"The splitters are simple to install and simple to use. We include an easy to follow drill-guide template to install the SteelPro System into your Zero Clearance Insert (ZCI). Keep using the MJ Splitter SteelPro with Plug N' Play ease. Remount and remove the Splitters in two seconds. Make no compromises in safety. Make table saw rips safer and prevent kickback!Technical Details:For a Thin Kerf range of 0.090"-0.118" Use for 90° cuts onlyMade of 100% polycarbonate shell and reinforced with a solid stainless steel coreThe Dual Splitter controls the pressure on the keeper piece AND the off-cut piece by the thousands on an inch

Micro Jig Splitter SteelPRO System, 1/8'' Kerf

Micro Jig Splitter SteelPRO System, 1/8'' Kerf
$39.99

Micro Jig Splitter SteelPro is constructed from a 100% polycarbonate shell and reinforced with a solid stainless steel core. Toughest Micro Jig splitter ever, utilizes the same patented technology of the original Micro Jig Splitters. Furthermore, the SteelPRO employs another groundbreaking innovation for table saw safety and efficacy: The Dual Splitter. This allows the splitters to control the pressure on the keeper piece AND the off-cut piece by the thousands on an inch. This will virtually eliminate any chance of kickback on the table saw and greatly reduce the chance of severing fingers.The splitters are simple to install and simple to use. We include an easy to follow drill-guide template to install the SteelPro System into your Zero Clearance Insert (ZCI). Keep using the MJ Splitter SteelPro with Plug N' Play ease. Remount and remove the Splitters in two seconds. Make no compromises in safety. Make table saw rips safer and prevent kickback!Technical Details:For a kerf range of 0.118"-0.145" Use for 90° cuts onlyMade of 100% polycarbonate shell and reinforced with a solid stainless steel coreThe Dual Splitter controls the pressure on the keeper piece AND the off-cut piece by the thousands on an inch

Distinctive Series Dovetail Templates, Style B

Distinctive Series Dovetail Templates, Style B
$39.99

The Distinctive Series Dovetail Templates, Style B can be used with the Rockler Dovetail Jig, 22818 (sold separately) to create a clean visually striking dovetail. This template eliminates the need to shift around different templates in order to achieve an interesting spacing between joints. Its set up to work perfectly with stock widths commonly used in making drawers, but you can also get creative and create your own spacing patterns. This template produces its unique dovetails due to its preset spacing for 4", 5", 7" and 10" widths and is easily installed on your Rockler Dovetail Jig. This Distinctive Dovetail Template also comes with the needed knobs and T-bolts so youre ready to place it on your jig as soon as you get it. This template works with the router bits included with the Rockler Dovetail Jig, 22818 (sold separately). For added variety you can also use the 8mm Distinctive Series Dovetail Router Bits (sold separately).

Distinctive Series Dovetail Templates, Style A

Distinctive Series Dovetail Templates, Style A
$39.99

The Distinctive Series Dovetail Templates, Style A can be used with the Rockler Dovetail Jig, 22818 (sold separately) to create a narrow pinned dovetail. This template creates a fine, hand-cut appearance with the wide dovetails and narrow pins. This dovetail produced by this template is typical of handmade furniture but could also be used on other projects as well. This Distinctive Dovetail Template also comes with the needed knobs and T-bolts so youre ready to place it on your jig as soon as you get it. Best of all installation is easy. This template works with the router bits included with the Rockler Dovetail Jig, 22818 (sold separately). For added variety you can also use the 8mm Distinctive Series Dovetail Router Bits (sold separately).

Rockler Deluxe Drawer Pull JIG IT

Rockler Deluxe Drawer Pull JIG IT
$39.99

Rockler exclusive JIG IT template makes marking screw holes for knob and pull installation quick, simple and accurate.Offers spacing for 2-1/2", 3", 3-1/2", 3-3/4", 4" and 96mm.Includes 24" aluminum T-slot bar, left to right self-adhesive tape measure, stop block for repetitive drawer pull alignment, and automatic center punch for perfect drill bit alignment every time.

Rockler Circle Cutting Jig

Rockler Circle Cutting Jig
$39.99

Cut flawless circles from 10" to 52" in diameter without complicated math equations! The Rockler Circle Cutting Jig sets up in minutes and mounts quickly to many popular routers made by Porter Cable, Makita, Hitachi, DeWalt, and Bosch. Or, easily drill your own holes to custom fit any router. Includes two center pivot pins which are used as a pivot point to rout perfectly arced circles (one pin is used for soft woods, use the other if your design allows drilling a center hole). A recessed groove in the jig lets you slide the center pivot pin (your center point) up or down the length of the jig to find the correct, exact diameter of your circle. Use the 4-star knob to tighten the T-bolt with the center pivot pin installed and you're ready to go!Fits the following Routers:Porter Cable 100, 690, 890, 7529, 8529Makita 1100 Series Hitachi M12VCDewalt DW616, DW618, DW625Bosch 1617 Series, 1618 Series, 1619 and 1619 EVSNote:This item is not predrilled for the Bosch Plunge Base.

Dowel Pro Jig

Dowel Pro Jig
$39.99

Delivers the precision demanded by professional woodworkers. Precisely aligned guides for 1/4" , 5/16" and 3/8" holes. Handles stock ranging from 1/2" to 1-1/4" , includes precise depth stops for 1/4" , 5/16" and 3/8" drill bits. An assortment of dowel pins is included with the jig. Aluminum.

Game JIG IT Tic-Tac-Toe/Last Man-Templates

Game JIG IT Tic-Tac-Toe/Last Man-Templates
$39.99

Our templates let you drill 100 holes or more in minutes-making it easier than ever to create lots of games quickly, accurately, and with excellent repeatability!Durable 1/4' Plexiglas templates for making game boards, great for making gifts or larger quantities. Templates measure 4-1/2' x 4-1/2' Sets include drilling jig and line template. Choose the template that make perfectly spaced peg or marble holes- then select the appropriate drill bit. Our exclusive bit for marble games cuts a clean, perfect recess and the plunge cutting bit to create a slot that keeps the marbles in place.Line templates are precisely cut for creating evenly spaced lines. Markers contain black paint for crisp, solid lines.Check out our Router bits for finishing off your project with a nice edging. Game pegs also available.

Leigh Joint Guides for the FMT

Leigh Joint Guides for the FMT
$39.99

Rout a huge variety of mortise and tenon joints with this selection of joint guides and your FMT Mortise and Tenon Jig.The 1/4" FMT guide set (31536) includes 8 guides and 1 stand (Leigh item #6704). It can machine mortises and tenons 1/4" thick, ranging from 1/4" to 2-3/8" wide.The 3/8" FMT guide set (33859) includes 4 guides and 1 stand (Leigh item #6706). It can machine mortises and tenons 3/8" thick, ranging from 1" to 2-1/2" wide.The 1/2" FMT guide set (31886) includes 4 guides and 1 stand (Leigh item #6708). It can machine mortises and tenons 1/2" thick, ranging from 1" to 2-1/2" wide.30319 combines the three FMT guide sets above: 1/4", 3/8" and 1/2". Includes 16 guides and 3 stands (Leigh item #6720).

Kreg R3 Pocket Hole System

Kreg R3 Pocket Hole System
$39.95

The newest offering from Kreg is the perfect pocket hole jig for the Do-It-Yourselfer!Allows you to put pocket holes together more quickly than ever before. Simply drill pocket holes and drive self-tapping screws.Nine position settings let you create strong wood joints in materials from 1/2" to 1-1/2" thick in 1/8" increments.Hardened steel drill guides with lifetime warranty.With wood chip relief holes and clamp adapter.Kit includes the R3 Jig with a clamp pad adapter, step drill bit, depth collar and Allen wrench, 6" driver bit, and sample screws and plugs.Comes in organized carrying case.Clamp not included.

Knife Jig SVM-45 for Tormek T-7 Sharpening System

Knife Jig SVM-45 for Tormek T-7 Sharpening System
$39.00

Recommended for knives with a minimum blade length of 2-3/8". Plus straight or curved spoke shave blades.Best Used With:35254 - Tormek T-7 Sharpening System47119 - Tormek SVM-00 Small Knife Sharpening JigClick Here to View Instructions:

Additional Alignment Plate for JIG IT Multi-Tool Rail

Additional Alignment Plate for JIG IT Multi-Tool Rail
$37.99

Extra alignment plate for easy, accurate drilling of concealed-hinge cup holes on cabinet doors with the JIG IT Multi-Tool Rail Master Pack (31126, sold separately).

Pages: first pageprev page4 5 6 7 8 9 10 11 12 13next pagelast page