Pages: 1 2 3 4next pagelast page

Powermatic 10" Table Saw 5HP w/50" Fence & Workbench (PM2000)(1792017K)

Powermatic 10" Table Saw 5HP w/50" Fence & Workbench (PM2000)(1792017K)
$4,149.99

The award winning PM2000 table saw sets a new standard for innovation with an array of patented features and massive body design. It boasts the heaviest cast iron base in its class that virtually eliminates table vibration. The cast iron tables are oversized, and the push button arbor lock is accessible from above the table top to eliminate the need for dual arbor wrenches. The quick-release riving knife design helps reduce the chance of kickback. The blade tilt scale has adjustable angle indicators for repetitive bevel cuts. Built-in retractable omni-directional caster system mobilizes your table saw. A wide stance, heavy-duty trunnion and concave teeth on the trunnion gears promote easier raising and tilting of saw blade. Poly-V drive belt system results in quieter, more efficient power transfer from the motor to the arbor with virtually no vibration and less heat build up. Built-in dust collection port with sloped cabinet floor and convenient access to the inside of the saw cabinet make for simple clean-up. The saw has a proprietary safety switch with magnetic interlock, and the stop button can be knee activated. The melamine extension table with steel frame doubles as a mobile workbench, complete with bench dog holes and a vise.Quick release riving knife greatly reduces binding/kickback risk Built-in retractable caster system (patent pending) for immediate shop mobility Push button arbor lock (patent pending) for rapid blade change Extension table doubles as a mobile workbench Poly-V drive belt system delivers efficient, quiet operation Wide stance heavy-duty trunnion for stability and smooth blade positioning Adjustable angle indicators (patent pending) on the blade bevel scale for repeatable bevel cuts Industrial-duty Accu-Fence System ensures accurate cuts Enclosed cabinet with cast iron base for rigidity Heavy-duty deluxe micro-adjust miter gauge with aluminum extruded 13" extension fence, for good workpiece support and fine angle adjustments. Precision ground, high luster, cast iron table top with front and rear edge bevel to prevent catching of miter gauge on table edge Heavy-duty chrome plated handwheels contribute to smooth trunnion/arbor movement Industrial magnetic controls, and jumbo stop switch is reachable with the knee Built-in 4" port for dust collectionStandard Equipment:TEFC Motor with magnetic controls Standard left and right cast iron extension wings Accu-Fence system with 50" to the right cutting capacity Workbench extension table Arbor wrench Motor cover Blade, power cord plug not included

Powermatic 10'' Table Saw 3HP w/50'' Fence & Workbench

Powermatic 10'' Table Saw 3HP w/50'' Fence & Workbench
$3,589.99

The award winning PM2000 table saw sets a new standard for innovation with an array of patented features and massive body design. It boasts the heaviest cast iron base in its class that virtually eliminates table vibration. The cast iron tables are oversized, and the push button arbor lock is accessible from above the table top to eliminate the need for dual arbor wrenches. The quick-release riving knife design helps reduce the chance of kickback. The blade tilt scale has adjustable angle indicators for repetitive bevel cuts. Built-in retractable omni-directional caster system mobilizes your table saw. A wide stance, heavy-duty trunnion and concave teeth on the trunnion gears promote easier raising and tilting of saw blade. Poly-V drive belt system results in quieter, more efficient power transfer from the motor to the arbor with virtually no vibration and less heat build up. Built-in dust collection port with sloped cabinet floor and convenient access to the inside of the saw cabinet make for simple clean-up. The saw has a proprietary safety switch with magnetic interlock, and the stop button can be knee activated. The melamine extension table with steel frame doubles as a mobile workbench, complete with bench dog holes and a vise.Quick release riving knife greatly reduces binding/kickback risk Built-in retractable caster system (patent pending) for immediate shop mobility Push button arbor lock (patent pending) for rapid blade change Extension table doubles as a mobile workbench Poly-V drive belt system delivers efficient, quiet operation Wide stance heavy-duty trunnion for stability and smooth blade positioning Adjustable angle indicators (patent pending) on the blade bevel scale for repeatable bevel cuts Industrial-duty Accu-Fence System ensures accurate cuts Enclosed cabinet with cast iron base for rigidity Heavy-duty deluxe micro-adjust miter gauge with aluminum extruded 13" extension fence, for good workpiece support and fine angle adjustments. Precision ground, high luster, cast iron table top with front and rear edge bevel to prevent catching of miter gauge on table edge Heavy-duty chrome plated handwheels contribute to smooth trunnion/arbor movement Industrial magnetic controls, and jumbo stop switch is reachable with the knee Built-in 4" port for dust collectionStandard Equipment:TEFC Motor with magnetic controls Standard left and right cast iron extension wings Accu-Fence system with 50" to the right cutting capacity Workbench extension table Arbor wrench Motor cover Blade, power cord plug not included

Powermatic PM2000 10" Tablesaw, 5HP 3PH 230/460V, 50" Accu-Fence System, Workbench

Powermatic PM2000 10" Tablesaw, 5HP 3PH 230/460V, 50" Accu-Fence System, Workbench
$3,589.99

The award winning PM2000 table saw sets a new standard for innovation with an array of patented features and massive body design. It boasts the heaviest cast iron base in its class that virtually eliminates table vibration. The cast iron tables are oversized, and the push button arbor lock is accessible from above the table top to eliminate the need for dual arbor wrenches. The quick-release riving knife design helps reduce the chance of kickback. The blade tilt scale has adjustable angle indicators for repetitive bevel cuts. Built-in retractable omni-directional caster system mobilizes your table saw. A wide stance, heavy-duty trunnion and concave teeth on the trunnion gears promote easier raising and tilting of saw blade. Poly-V drive belt system results in quieter, more efficient power transfer from the motor to the arbor with virtually no vibration and less heat build up. Built-in dust collection port with sloped cabinet floor and convenient access to the inside of the saw cabinet make for simple clean-up. The saw has a proprietary safety switch with magnetic interlock, and the stop button can be knee activated. The melamine extension table with steel frame doubles as a mobile workbench, complete with bench dog holes and a vise.Quick release riving knife greatly reduces binding/kickback risk Built-in retractable caster system (patent pending) for immediate shop mobility Push button arbor lock (patent pending) for rapid blade change Extension table doubles as a mobile workbench Poly-V drive belt system delivers efficient, quiet operation Wide stance heavy-duty trunnion for stability and smooth blade positioning Adjustable angle indicators (patent pending) on the blade bevel scale for repeatable bevel cuts Industrial-duty Accu-Fence System ensures accurate cuts Enclosed cabinet with cast iron base for rigidity Heavy-duty deluxe micro-adjust miter gauge with aluminum extruded 13" extension fence, for good workpiece support and fine angle adjustments. Precision ground, high luster, cast iron table top with front and rear edge bevel to prevent catching of miter gauge on table edge Heavy-duty chrome plated handwheels contribute to smooth trunnion/arbor movement Industrial magnetic controls, and jumbo stop switch is reachable with the kneeBuilt-in 4" port for dust collectionStandard Equipment: TEFC Motor with magnetic controls Standard left and right cast iron extension wings Accu-Fence system with 50" to the right cutting capacity Workbench extension table Arbor wrench Motor cover Blade, power cord plug not included

Sjobergs Elite Workbench 2500 with Cabinet SM04

Sjobergs Elite Workbench 2500 with Cabinet SM04
$2,730.00

The Sjobergs Elite cabinetmaker's workbenches are made in Sweden to the very highest standards. Designed to totally eliminate any vibration, rocking or racking, they are suitable for the most demanding professionals. For maximum strength, the top is constructed with full-length laminations of knot-free European beech, without any ugly splices. Solid beech is also used in the preassembled trestle frames, and the entire bench is treated with top-quality oil. The tops are just under 3-3/8'' thick in the middle, joined with tongue and groove joints for consistent flatness. The skirt around the edge is a sturdy 4-5/16'' in height. The two massive pre-mounted vises, made in Sweden exclusively for Sjobergs, boast a 5-3/4'' opening capacity, and slide along fully adjustable guide rails to eliminate any jaw misalignment. If you are left-handed, the front vise can be moved to the other side of the bench, and the top rotated 180°. The bench also includes four solid steel bench dogs with side springs, while double rows of dog holes permit even the toughest clamping jobs using either vise. The heaviest, most durable benches in the Sjobergs line-built from solid beech and treated with top-quality oilMassive vises are 29'' wide with a 5-3/4'' opening capacityDouble rows of bench dog holes extend from both vise locationsTrestle is also pre-drilled with dog holesIncluded cabinet with doors and drawers offers convenient tool storage and added mass, which further eliminates vibrationIncludes four unbreakable 1'' round steel bench dogs that can be used in both the benchtop and the trestleVises can be rotated for both left- and right-handed useOptional Height Adjustment Blocks (56753, sold separately) raise the working height by 3-1/2'' for taller woodworkers

Sjobergs Elite Workbench 2000 with Cabinet SM04

Sjobergs Elite Workbench 2000 with Cabinet SM04
$2,575.00

The Sjobergs Elite cabinetmaker's workbenches are made in Sweden to the very highest standards. Designed to totally eliminate any vibration, rocking or racking, they are suitable for the most demanding professionals. For maximum strength, the top is constructed with full-length laminations of knot-free European beech, without any ugly splices. Solid beech is also used in the preassembled trestle frames, and the entire bench is treated with top-quality oil. The tops are just under 3-3/8'' thick in the middle, joined with tongue and groove joints for consistent flatness. The skirt around the edge is a sturdy 4-5/16'' in height. The two massive pre-mounted vises, made in Sweden exclusively for Sjobergs, boast a 5-3/4'' opening capacity, and slide along fully adjustable guide rails to eliminate any jaw misalignment. If you are left-handed, the front vise can be moved to the other side of the bench, and the top rotated 180°. The bench also includes four solid steel bench dogs with side springs, while double rows of dog holes permit even the toughest clamping jobs using either vise. The heaviest, most durable benches in the Sjobergs line-built from solid beech and treated with top-quality oilMassive vises are 29'' wide with a 5-3/4'' opening capacityDouble rows of bench dog holes extend from both vise locationsTrestle is also pre-drilled with dog holesIncluded cabinet with doors and drawers offers convenient tool storage and added mass, which further eliminates vibrationIncludes four unbreakable 1'' round steel bench dogs that can be used in both the benchtop and the trestleVises can be rotated for both left- and right-handed useOptional Height Adjustment Blocks (56753, sold separately) raise the working height by 3-1/2'' for taller woodworkers

Sjobergs Elite Workbench 1500 with Cabinet SM03

Sjobergs Elite Workbench 1500 with Cabinet SM03
$2,265.00

The Sjobergs Elite cabinetmaker's workbenches are made in Sweden to the very highest standards. Designed to totally eliminate any vibration, rocking or racking, they are suitable for the most demanding professionals. For maximum strength, the top is constructed with full-length laminations of knot-free European beech, without any ugly splices. Solid beech is also used in the preassembled trestle frames, and the entire bench is treated with top-quality oil. The tops are just under 3-3/8'' thick in the middle, joined with tongue and groove joints for consistent flatness. The skirt around the edge is a sturdy 4-5/16'' in height. The two massive pre-mounted vises, made in Sweden exclusively for Sjobergs, boast a 5-3/4'' opening capacity, and slide along fully adjustable guide rails to eliminate any jaw misalignment. If you are left-handed, the front vise can be moved to the other side of the bench, and the top rotated 180°. The bench also includes four solid steel bench dogs with side springs, while double rows of dog holes permit even the toughest clamping jobs using either vise. The heaviest, most durable benches in the Sjobergs line-built from solid beech and treated with top-quality oilMassive vises are 29'' wide with a 5-3/4'' opening capacityDouble rows of bench dog holes extend from both vise locationsTrestle is also pre-drilled with dog holesIncluded cabinet with doors and drawers offers convenient tool storage and added mass, which further eliminates vibrationIncludes four unbreakable 1'' round steel bench dogs that can be used in both the benchtop and the trestleVises can be rotated for both left- and right-handed useOptional Height Adjustment Blocks (56753, sold separately) raise the working height by 3-1/2'' for taller woodworkers

Sjobergs Elite Workbench 2500

Sjobergs Elite Workbench 2500
$2,215.00

The Sjobergs Elite cabinetmaker's workbenches are made in Sweden to the very highest standards. Designed to totally eliminate any vibration, rocking or racking, they are suitable for the most demanding professionals. For maximum strength, the top is constructed with full-length laminations of knot-free European beech, without any ugly splices. Solid beech is also used in the preassembled trestle frames, and the entire bench is treated with top-quality oil. The tops are just under 3-3/8'' thick in the middle, joined with tongue and groove joints for consistent flatness. The skirt around the edge is a sturdy 4-5/16'' in height. The two massive pre-mounted vises, made in Sweden exclusively for Sjobergs, boast a 5-3/4'' opening capacity, and slide along fully adjustable guide rails to eliminate any jaw misalignment. If you are left-handed, the front vise can be moved to the other side of the bench, and the top rotated 180°. The bench also includes four solid steel bench dogs with side springs, while double rows of dog holes permit even the toughest clamping jobs using either vise. The heaviest, most durable benches in the Sjobergs line-built from solid beech and treated with top-quality oilMassive vises are 29'' wide with a 5-3/4'' opening capacityDouble rows of bench dog holes extend from both vise locationsTrestle is also pre-drilled with dog holesIncludes four unbreakable 1'' round steel bench dogs that can be used in both the benchtop and the trestleVises can be rotated for both left- and right-handed useOptional Height Adjustment Blocks (56753, sold separately) raise the working height by 3-1/2'' for taller woodworkers

Sjobergs Elite Workbench 2000

Sjobergs Elite Workbench 2000
$2,060.00

The Sjobergs Elite cabinetmaker's workbenches are made in Sweden to the very highest standards. Designed to totally eliminate any vibration, rocking or racking, they are suitable for the most demanding professionals. For maximum strength, the top is constructed with full-length laminations of knot-free European beech, without any ugly splices. Solid beech is also used in the preassembled trestle frames, and the entire bench is treated with top-quality oil. The tops are just under 3-3/8'' thick in the middle, joined with tongue and groove joints for consistent flatness. The skirt around the edge is a sturdy 4-5/16'' in height. The two massive pre-mounted vises, made in Sweden exclusively for Sjobergs, boast a 5-3/4'' opening capacity, and slide along fully adjustable guide rails to eliminate any jaw misalignment. If you are left-handed, the front vise can be moved to the other side of the bench, and the top rotated 180°. The bench also includes four solid steel bench dogs with side springs, while double rows of dog holes permit even the toughest clamping jobs using either vise. The heaviest, most durable benches in the Sjobergs line-built from solid beech and treated with top-quality oilMassive vises are 29'' wide with a 5-3/4'' opening capacityDouble rows of bench dog holes extend from both vise locationsTrestle is also pre-drilled with dog holesIncludes four unbreakable 1'' round steel bench dogs that can be used in both the benchtop and the trestleVises can be rotated for both left- and right-handed useOptional Height Adjustment Blocks (56753, sold separately) raise the working height by 3-1/2'' for taller woodworkers

Sjobergs Elite Workbench 1500

Sjobergs Elite Workbench 1500
$2,000.00

The Sjobergs Elite cabinetmaker's workbenches are made in Sweden to the very highest standards. Designed to totally eliminate any vibration, rocking or racking, they are suitable for the most demanding professionals. For maximum strength, the top is constructed with full-length laminations of knot-free European beech, without any ugly splices. Solid beech is also used in the preassembled trestle frames, and the entire bench is treated with top-quality oil. The tops are just under 3-3/8'' thick in the middle, joined with tongue and groove joints for consistent flatness. The skirt around the edge is a sturdy 4-5/16'' in height. The two massive pre-mounted vises, made in Sweden exclusively for Sjobergs, boast a 5-3/4'' opening capacity, and slide along fully adjustable guide rails to eliminate any jaw misalignment. If you are left-handed, the front vise can be moved to the other side of the bench, and the top rotated 180°. The bench also includes four solid steel bench dogs with side springs, while double rows of dog holes permit even the toughest clamping jobs using either vise. The heaviest, most durable benches in the Sjobergs line-built from solid beech and treated with top-quality oilMassive vises are 29'' wide with a 5-3/4'' opening capacityDouble rows of bench dog holes extend from both vise locationsTrestle is also pre-drilled with dog holesIncludes four unbreakable 1'' round steel bench dogs that can be used in both the benchtop and the trestleVises can be rotated for both left- and right-handed useOptional Height Adjustment Blocks (56753, sold separately) raise the working height by 3-1/2'' for taller woodworkers

Sjobergs Scandi Plus Workbench 1825 with SM03 Cabinet

Sjobergs Scandi Plus Workbench 1825 with SM03 Cabinet
$1,595.00

With versatility and durability in spades, the Sjobergs Scandi Plus workbenches are perfectly suited for the demanding work of professional woodworkers and serious craftsmen. For strength, the tops are constructed with full-length laminations of knot-free European beech, without any ugly splices. With a thickness of 1-1/2'' in the center, and a skirt of 4-5/16'', the top is extremely strong. Solid beech is also used in the preassembled trestle frames. The bench has two double rows of 3/4'' dog holes working from both the front and tail vises, as well as dog holes in the trestle legs for a wide variety of clamping options. Includes four unbreakable bench dogs with side springs to ensure that they stay at the desired height. The dogs automatically adjust to non-parallel workpieces. Made in Sweden, Sjobergs Scandi Plus workbenches are built to provide a lifetime of hard use and enjoyment. Tops are extremely strong—1-1/2'' thick in the middle, and 4-1/4'' around the edgeVises have a 4-1/2'' opening capacityDouble rows of bench dog holes extend from both vise locationsTrestle is also pre-drilled with dog holesIncluded cabinet with doors and drawers offers convenient tool storage and added mass, which further eliminates vibrationIncludes four 3/4'' round plastic/glass fiber bench dogs

Sjobergs Scandi Plus Workbench 1425 with SM03 Cabinet

Sjobergs Scandi Plus Workbench 1425 with SM03 Cabinet
$1,442.00

With versatility and durability in spades, the Sjobergs Scandi Plus workbenches are perfectly suited for the demanding work of professional woodworkers and serious craftsmen. For strength, the tops are constructed with full-length laminations of knot-free European beech, without any ugly splices. With a thickness of 1-1/2'' in the center, and a skirt of 4-5/16'', the top is extremely strong. Solid beech is also used in the preassembled trestle frames. The bench has two double rows of 3/4'' dog holes working from both the front and tail vises, as well as dog holes in the trestle legs for a wide variety of clamping options. Includes four unbreakable bench dogs with side springs to ensure that they stay at the desired height. The dogs automatically adjust to non-parallel workpieces. Made in Sweden, Sjobergs Scandi Plus workbenches are built to provide a lifetime of hard use and enjoyment. Tops are extremely strong—1-1/2'' thick in the middle, and 4-1/4'' around the edgeVises have a 4-1/2'' opening capacityDouble rows of bench dog holes extend from both vise locationsTrestle is also pre-drilled with dog holesIncluded cabinet with doors and drawers offers convenient tool storage and added mass, which further eliminates vibrationIncludes four 3/4'' round plastic/glass fiber bench dogs

Jet HVBS-7MW 7'' x 12'' Horizontal/Vertical Bandsaw, 115/230V, Single-Phase

Jet HVBS-7MW 7'' x 12'' Horizontal/Vertical Bandsaw, 115/230V, Single-Phase
$1,299.00

The Jet HVBS-7MW Metalworking Bandsaw has everything you need to tackle even the toughest metal cutting jobs-all with a single-phase motor that's perfect for home shops. With its advanced hydraulic downfeed system, you can precisely control the rate of cut as the blade descends through the material-just let the saw do the work while you plug away at other tasks nearby. Its pump-driven blade coolant system ensures faster cutting, longer blade life and reduces wear on the motor. A high capacity swivel vise makes angle cuts easy, while the 3/4 HP, 115-volt motor delivers smooth, dependable operation, and four blade speeds let you tailor the cutting characteristics for a wide range of materials. Once the blade exits the material, the saw shuts off automatically.Features:Roller blade guides for cutting stabilityAble to handle a wide range of metalsBlade drive consists of a hardened and ground worm gearNew 8'' caster wheels for convenient moving to various work stationsBuilt-in, self-propelled blade brush extends blade lifeChip tray is built into the roller tray to help maintain a clean workspaceFully adjustable hydraulic downfeed systemHeavy-duty cast iron saw bow and bedRoller cabinet with built-in chip trayAutomatic shut-off after cutIncludes work table for working in vertical positionPump-driven coolant systemAdjustable material stopFor added safety, the motor and electrics follow strict guidelines and electrical requirements to be certified by CSA GroupUL Listed Motor

Powermatic Tilt Table Mortiser w/Stand

Powermatic Tilt Table Mortiser w/Stand
$1,274.99

The 719T Tilt Table Mortiser features heavy-duty cast iron construction and a powerful 1HP motor for the most demanding jobs. The head is mounted using adjustable gibs to assure years of trouble-free service. The heavy rack and pinion gear system utilizes a spring-loaded six position adjustable handle for movement. A handy depth stop gives a uniform depth of mortise. A large 20-1/4" x 7" table gives plenty of work support and will adjust to any angle between 0 and 35°. The table can also move left to right and forward and back on dovetail ways with the large handwheel controls. Adjustable linear stops and flip down stop allow for precision repeatability. The quick adjust clamp provides plenty of work-holding force and will swivel to accommodate angled workpieces. The heavy enclosed steel cabinet provides plenty of storage inside for chisels and accessories. Sturdy cast iron construction with precision-machined column and table Quick position table mounted swiveling vise clamp accommodates angled work pieces Feed lever features size positions allowing for quick adjustments Table and fence tilt from 0 to 35° for angled mortises Gas cylinder controlled rack and pinion system for smooth head raising and lowering Hinged chuck door allows easy access for quick bit changes Quick adjust depth stop for uniform mortise depths Provided 5/8", 3/4" and 1-1/8" bushings allow multiple chisel shank sizes Handwheels control smooth linear and cross table motions Adjustable work stop for repeat cuts Standard Equipment 1HP motor Work stop for repeat cut Depth and length stops Enclosed stand with shelf Gas spring assists head travel for smooth movement Quick-release vise for speedy release of work material 6 position feed lever

Sjobergs Duo Workbench with SM03 Cabinet

Sjobergs Duo Workbench with SM03 Cabinet
$1,175.00

With four standard vise locations—one on each end, and two along the front edge—the Sjobergs Duo is capable of securely holding nearly any workpiece. Constructed entirely from solid European beech, it also makes no sacrifices in durability. The vises can be rotated to suit left- or right-handed woodworkers. In addition, they can be positioned as dual front vises to hold extra-long boards for jointing, or as dual tail vises for an extended lengthwise clamping capacity of 63''. For strength, the tops are constructed with full-length laminations of knot-free European beech, without any ugly splices. With a thickness of just over 1'' in the center, and a skirt of 2-3/4'', the top is very rigid. The Sjobergs Duo cabinetmaker's workbench is built to provide a lifetime of hard use and enjoyment. Beech top is just over 1'' thick in the middle, and 2-3/4'' around the edgeVises have a 4-1/2'' opening capacityDouble rows of bench dog holes extend from all vise locationsTrestle is also pre-drilled with dog holesIncluded cabinet with doors and drawers offers convenient tool storage and added mass for less vibrationIncludes four 3/4'' round plastic/glass fiber bench dogs

Sjobergs Scandi Plus Workbench 1825

Sjobergs Scandi Plus Workbench 1825
$1,133.00

With versatility and durability in spades, the Sjobergs Scandi Plus workbenches are perfectly suited for the demanding work of professional woodworkers and serious craftsmen. For strength, the tops are constructed with full-length laminations of knot-free European beech, without any ugly splices. With a thickness of 1-1/2'' in the center, and a skirt of 4-5/16'', the top is extremely strong. Solid beech is also used in the preassembled trestle frames. The bench has two double rows of 3/4'' dog holes working from both the front and tail vises, as well as dog holes in the trestle legs for a wide variety of clamping options. Includes four unbreakable bench dogs with side springs to ensure that they stay at the desired height. The dogs automatically adjust to non-parallel workpieces. Made in Sweden, Sjobergs Scandi Plus workbenches are built to provide a lifetime of hard use and enjoyment. Tops are extremely strong—1-1/2'' thick in the middle, and 4-1/4'' around the edgeVises have a 4-1/2'' opening capacityDouble rows of bench dog holes extend from both vise locationsTrestle is also pre-drilled with dog holesIncludes four 3/4'' round plastic/glass fiber bench dogs

Sjobergs Duo Workbench

Sjobergs Duo Workbench
$669.00

With four standard vise locations—one on each end, and two along the front edge—the Sjobergs Duo is capable of securely holding nearly any workpiece. Constructed entirely from solid European beech, it also makes no sacrifices in durability. The vises can be rotated to suit left- or right-handed woodworkers. In addition, they can be positioned as dual front vises to hold extra-long boards for jointing, or as dual tail vises for an extended lengthwise clamping capacity of 63''. For strength, the tops are constructed with full-length laminations of knot-free European beech, without any ugly splices. With a thickness of just over 1'' in the center, and a skirt of 2-3/4'', the top is very rigid. The Sjobergs Duo cabinetmaker's workbench is built to provide a lifetime of hard use and enjoyment. Beech top is just over 1'' thick in the middle, and 2-3/4'' around the edgeVises have a 4-1/2'' opening capacityDouble rows of bench dog holes extend from all vise locationsTrestle is also pre-drilled with dog holesIncludes four 3/4'' round plastic/glass fiber bench dogs

Sjobergs Nordic Plus Workbench 1450

Sjobergs Nordic Plus Workbench 1450
$535.00

The Sjobergs Nordic Plus workbench gives you the functionality and size you need at a price you can afford. With four standard vise locations—one on each end, and two along the front edge—the Nordic Plus is capable of securely holding most anything. The vises can be rotated to suit left- or right-handed woodworkers, and they can be positioned as dual front vises to hold extra-long boards for jointing, or as dual tail vises for an extended lengthwise clamping capacity of 63''. The top is constructed from solid Scandinavian birch, while the trestle is made from Nordic pine. With a thickness of just over 1'' in the center, and a skirt of 2-3/4'', the top is very rigid. Solid birch top is just over 1'' thick in the middle, and 2-3/4'' around the edgeTrestle is made from Nordic pinePowerful steel vise spindles can withstand up to 1300 kp of force (12748 N)Vises have a 4-1/2'' opening capacityDouble rows of bench dog holes extend from all vise locationsTrestle is also pre-drilled with dog holesIncludes four 3/4'' round plastic/glass fiber bench dogs

Sjobergs Hobby Plus Workbench 1340, Birch

Sjobergs Hobby Plus Workbench 1340, Birch
$412.00

The Sjobergs Hobby Plus 1340 workbench gives you the functionality and size you need at a price you can afford. With double rows of dog holes extending from both vise locations, the Hobby Plus is a versatile workholding station. It's ideal for woodworking hobbyists, and also for any other situation where you need two hands free as you work on a securely clamped workpiece. The top is constructed from solid Scandinavian birch, while the trestle is made from Nordic pine. With a thickness of just over 1'' in the center, and a skirt of 2-1/2'', the top is very rigid. Solid birch top is just over 1'' thick in the middle, and 2-1/2'' around the edgeTrestle is made from Nordic pineDouble rows of bench dog holes extend from both vise locationsTrestle is also pre-drilled with dog holesIncludes four 3/4'' round plastic/glass fiber bench dogs

Pages: 1 2 3 4next pagelast page