Pages: first pageprev page12 13 14 15 16 17 18 19 20 21next pagelast page

Rockler Glue Bottle/Spray Can Rack

Rockler Glue Bottle/Spray Can Rack
$20.99

Keep your spray cans and glue bottles close by and organized with a Glue Bottle/Spray Can Rack! This rugged galvanized steel rack holds up to five standard spray cans or three spray cans and two quart-sized Glue Storage Containers (sold separately, #23962). Two sets of pre-drilled mounting holes, one set is 16"-on-center, make it easy to mount to a wall or the side of the 18" deep Steel Shop Stand (sold separately, #68834). Made in USA.Technical Details: Ruggedly built out of galvanized steel Two sets of pre-drilled mounting holes, one set is 16"-on-center (3/8" diameter hang slot), the other (3/16"H x 3/8"W oval) set fits our 18" deep Steel Shop Stand (sold separately, #68834) Measures 4-1/2" x 18" x 4" high Three holes measure 2-7/8" and are made for standard size spray cans Two holes measure 3-1/4" and are made for quart-sized glue Glue Storage Containers (sold separately, #23962) Made in USA

Durable 3/8'' Thick Polycarbonate

Durable 3/8'' Thick Polycarbonate
$20.99

Eliminate wobble while cutting with your router by mounting this Durable 3/8" Thick Polycarbonate as a router base! The strong, support base keeps your router level and stable during the toughest of cuts. The polycarbonate may be cut, drilled, or routed to fit any application you need, but is strong enough to withstand extremely high impact, such as flying wood chips. Plus, the clear transparent sheet lets you keep a close eye on what you are doing (the clear base is not a substitute for safety glasses). 3/8" piece comes in an approximate size of 12" x 12".Technical Details:Eliminates wobble while cutting with your router3/8" thick clear polycarbonate lets you keep watch of your work while you cut (not a substitute for safety glasses)Wide base keeps your router level and stable during the toughest of cutsMay be cut, drilled, or routed to fit any application you needStrong enough to withstand extremely high impact, such as flying wood chipsApproximate sizes of 12" x 12"

Armor Auto-Pro Dog Brackets

Armor Auto-Pro Dog Brackets
$19.99

Once installed along the edge of your work surface, Dog Brackets let you enjoy the easy, versatile workholding capabilities of Armor Auto-Adjust Dog Clamps (e.g. 51910) and Dog Fences (e.g. 54926, both sold separately). Just slip your clamps or accessories into the dog holes for a variety of clamping arrangements. If you don't own a workbench with 3/4'' dog holes, these are an easy add-on. They can also be mounted to a workbench top with existing dog holes or to the legs to extend the clamping range and capabilities. High-quality anodized aluminum extrusionUse with any 3/4'' diameter dog holeMount with #8 wood screws (not included)

Rockler Stainless Steel Pizza Cutter Turning Kit, Chrome Finish

Rockler Stainless Steel Pizza Cutter Turning Kit, Chrome Finish
$19.99

Cut any pizza quickly and with ease! Robust, well-balanced hardware 3X the weight of competing cutters and a sharp 4" diameter stainless steel blade make this kit a must have for pizza lovers. Simply make your own creative handle (not included) to complete your cutter with personalized flair. Kit includes a 5/16" threaded insert to attach the handle and to remove it for dishwasher cleaning. Patent pending. Also available in a brass finish.See our complete line of Turning Stock to complete your project. Methods to consider for installing the threaded insert are:Use a 5/16" bolt and double nuts on a drill press. Cut the head off a 5/16" bolt and chuck it in a drill press. Then thread on two nuts and the insert so that it is flush with the end of the bolt. Tighten the two nuts on the insert so it won't spin on the bolt. After the pilot hole is drilled in the stock, clamp your stock with a handscrew or a drill press vise and manually turn the drill press chuck to drive the insert into the stock. DO NOT TURN ON THE DRILL PRESS. The drill press will keep the insert square to the stock as it is threaded in. We also recommend using beeswax, screw lube, or even soap to lubricate the threads on the insert.This process can also be done on a lathe using a three jaw chuck in the tailstock to manually feed the insert into the stock.And finally, if you're using acrylics for your handle, we have found that heating the insert before installing it makes it go in like a hot knife in butter.

Bench Cookie Plus Work Grippers with Sawhorse Clips, 4-Pack

Bench Cookie Plus Work Grippers with Sawhorse Clips, 4-Pack
$19.99

Sawhorses are incredibly practical when you need a lightweight, portable work surface, but if you've used them much, you know that workpieces tend to rattle around and get scratched while you saw, rout and sand. With the Bench Cookie Plus Sawhorse Clips, that's no longer a problem. Simply slip the clips over your sawhorses, spin your Bench Cookies Plus on, and you have a no-mar, no-slip work surface that is easily resizeable for any workpiece. The grip is so secure, it's almost like having a fully-equipped workbench with dog holes and a vise. Kit Includes the following:Bench Cookie Plus Work Grippers, 4-PackSawhorse Clips for Bench Cookie Plus, 4-PackBench Cookie Plus Work Grippers:New design features a threaded insert to add our Bench Cookie Risers, Bench Cookie T-Track Risers, and Bench Cookie Sawhorse Clips.Elevates your project off your work surface, giving blade clearance to your jigsawHigh-friction rubber pads hold your project rock-steady while you saw, sand, rout, finish, drill, and more

Rockler Stainless Steel Pizza Cutter Turning Kit, Pewter Finish

Rockler Stainless Steel Pizza Cutter Turning Kit, Pewter Finish
$19.99

Cut any pizza with ease-a must-have for pizza lovers! Robust, well-balanced hardware is 3X the weight of competing cutters and features a sharp 4'' diameter stainless steel blade. Just add your own custom handle (not included) to top it to your taste. Kit includes a 5/16'' threaded insert that lets you attach the handle or remove it for dishwasher cleaning. A 7/16'' drill bit is required for soft woods or a 1/2'' drill bit for hardwoods. Patent pending. Also available in brass or chrome. See our complete line of turning stock to turn the handle for your pizza cutter. Methods to consider for installing the threaded insert: Use a 5/16'' bolt and double nuts on a drill press. Cut the head off a 5/16'' bolt and chuck it in a drill press. Then thread on two nuts and the insert so that it is flush with the end of the bolt. Tighten the two nuts on the insert so it won't spin on the bolt. After the pilot hole is drilled in the stock, clamp your stock with a handscrew or a drill press vise and manually turn the drill press chuck to drive the insert into the stock. DO NOT TURN ON THE DRILL PRESS. The drill press will keep the insert square to the stock as it is threaded in. We also recommend using beeswax, screw lube, or even soap to lubricate the threads on the insert. This process can also be done on a lathe using a three jaw chuck in the tailstock to manually feed the insert into the stock. Finally, if you're using acrylics for your handle, we have found that heating the insert before installing it makes it go in like a hot knife in butter.

Stainless Steel Pizza Cutter Turning Kit, Brass Finish

Stainless Steel Pizza Cutter Turning Kit, Brass Finish
$19.99

Robust, well-balanced hardware 3X the weight of competing cutters and a sharp 4" diameter stainless steel blade make this kit a must have for pizza lovers. Simply make your own creative handle (not included) to complete your cutter with personalized flair. Kit includes a 5/16" threaded insert to attach the handle and to remove it for dishwasher cleaning. A 7/16'' drill bit is required for soft woods or a 1/2'' drill bit for hardwoods. Patent pending. Also available in a chrome finish.See our complete line of Turning Stock to complete your project. Methods to consider for installing the threaded insert are:Use the pizza cutter/bottle opener mandrel (#43469 Sold Separately) and chuck in your drill press. Tighten the two nuts on the insert so it won't spin on the bolt. After the pilot hole is drilled in the stock, clamp your stock with a handscrew or a drill press vise and manually turn the drill press chuck to drive the insert into the stock. Safety Tip: MAKE SURE DRILL PRESS IS UNPLUGGED. The drill press will keep the insert square to the stock as it is threaded in. We also recommend using beeswax, screw lube, or even soap to lubricate the threads on the insert. This process can also be done on a lathe using a three jaw chuck in the tailstock to manually feed the insert into the stock. And finally, if you're using acrylics for your handle, we have found that heating the insert before installing it makes it go in like a hot knife in butter.

Interlocking Anti-Fatigue Mat

Interlocking Anti-Fatigue Mat
$19.99

Puzzle mat design allows you to add on to cover as large a space as you require. One pack of six tiles covers 24 square feet. The tiles are easily arranged to turn the corner of your bench so you get the same relief while working at the tail vise. Soft, lightweight EVA foam is 3/8" thick. Includes 12 border pieces for a clean-looking outline.Technical Details:3/8" thick.Floor mat material: Lightweight EVA foam.Coverage: 24 square feet.Texture: Diamond plate pattern.Beveled anti-trip edges.

4" Heavy-Duty Polyurethane Casters-Optional Sizes

4" Heavy-Duty Polyurethane Casters-Optional Sizes
$19.99

These smooth-rolling casters support up to 265 lbs. each and come in five unique styles. Soft-yet-resiliant polyurethane wheels ride easily on everything from concrete to carpet and coolly skim over cracks, cords and other small obstacles. Perfect for mobilizing furniture, shop stands, equipment and more. Sold in pairs.Available styles:Rigid (Plate Mount)Swivel (Plate Mount)Total-Lock Swivel (Plate Mount) Each caster features a 4" diameter, 1-3/16" wide wheel and a cold-rolled, zinc-plated steel body. Overall height is 5".Rigid Casters:Allow for smooth and stable straight-line movement.Often used as the rear pair in a four-caster system.Swivel Casters:Provides smooth and quiet 360° rotation with sealed ball bearing swivel.Highly maneuverable.Total-Lock Swivel Casters:Foot-brake locks both wheel and swivel for stable stationary setups.Quick-release foot lever comes standard.Specifications:Overall width: 2-3/8"Plate size (plate mount casters only): 2-5/8" x 3-3/4" x 1/8"

5" Heavy-Duty Polyurethane Casters

5" Heavy-Duty Polyurethane Casters
$19.99

These smooth-rolling casters support up to 285 lbs. each and come in five unique styles. Soft-yet-resiliant polyurethane wheels ride easily on everything from concrete to carpet and effortlessly skim over cracks, cords and other small obstacles. Perfect for mobilizing furniture, shop stands, equipment and more. Sold in pairs.Available Styles:Swivel (Plate Mount)Total-Lock Swivel (Plate Mount)Each caster features a 5" diameter, 1-3/16" wide wheel and a cold-rolled, zinc-plated steel body. Overall height is 6".Rigid Casters:Allow for smooth and stable straight-line movement.Often used as the rear pair in a four-caster system.Swivel Casters:Provides smooth and quiet 360° rotation with sealed ball bearing swivel.Highly maneuverable.Total-Lock Swivel Casters:Foot-brake locks both wheel and swivel for stable stationary setups.Quick-release foot lever comes standard.Specifications:Overall width: 2-3/8"Plate size (plate mount casters only): 2-5/8" x 3-3/4" x 1/8"

Roller with Bracket

Roller with Bracket
$19.99

Make your own roller tables, stands, conveyor tracks and infeed/outfeed tables! Durable.Two sizes available.20829 Roller with BracketRoller: 15-3/4"L X 2-3/8" DiaLength with roller pins: 17-1/2"Total height in bracket: 2-15/16"20836 Roller with BracketRoller: 12-3/4" L X 1-1/2" DiaLength with spring tabs: 13-3/4"Height in top position: 3-1/8"Height in bottom position: 2"

Learn To Turn, Book

Learn To Turn, Book
$19.99

The ultimate beginner's guide to woodturning! Learn how to select the lathe that's right for you, identify the many tools used for woodturning and use them skillfully, transform logs into suitable turning material; and learn the fundamentals of sharpening, sanding and finishing. Softcover. 112 pages.Technical Details:Professional woodturner Barry Gross provides expert instruction, valuable tips and common-sense advice that will have you turning beautiful pieces in no time.Includes eight step-by-step projects, troubleshooting guide and artist's gallery.Full-color photos.Softcover.112 pages.Sections include: safety, choosing turning wood, sanding, finishing, spindle turning projects, faceplate turning projects, and more. Also instructs you on how to market and sell your wood turning projects.

3M ForceFlex Flexible Safety Glasses

3M ForceFlex Flexible Safety Glasses
$19.99

3M Force Flex Safety Glasses combine protection, strength, comfort and proven performance. Multi-injection technology makes for flexible, resilient frames that are more comfortable and more resistant to cracking. Additionally, the polycarbonate lenses are the strongest, most impact-resistant lens material on the market, are lightweight, and provide 99.9% UV protection. Each pair of Force Flex Safety Glasses comes with a storage bag and lanyard. ANSI Z87.1-2003 compliant - a great choice in eye protection for both the professional and the do-it-yourselfer.Technical Details:Flexible, resilient frames for a customizable fit.Multi-injection technology fuses lenses to the frames.Impact-resistant lenses.Protects against 99.9% of UV, UVA and UVB rays.Anti-scratch coating. Anti-fog coating.Includes microfiber storage bag and lanyard.Meets requirements of ANSI Z87.1-2003.

DVD - Router Beginner's Guide

DVD - Router Beginner's Guide
$19.95

Learn fundamental skills, maintenance practices and safety information to start gettingthe most out of your router. Information concerning techniques, tools and accessorieswill help you get started building beautiful furniture and more. Run time: 67 minutes.

Pyrography Workbook: A Complete Guide to the Art of Woodburning, Book

Pyrography Workbook: A Complete Guide to the Art of Woodburning, Book
$19.95

In the Pyrography Workbook, internationally renowned Australian pyrographer Sue Walters offers inspiration and sound practical information that will open your eyes to the artistic potential of pyrography. Whether you're a novice or an advanced woodburner, the engaging style and award-winning talents of Sue Walters will remove the mystery from this captivating art form and make it a more enjoyable experience. Paperback. 144 pages. In addition to a gallery of her award-winning work, three step-by-step projects, and a selection of original patterns to inspire future burning, Sue Walters explores: Practical and necessary aspects of safety and work area set-upEquipment and timber selectionPreparing the wood and transferring the designSpecial nib techniques and how to apply themTextures, patterns, and unusual pyrographical variationsBurning on leather, gourds, bark, and other materialsThe integration and use of color in pyrography About the Author: Sue Walters, is a world-reknowned self-taught woodburner who has won numerous international pyrographic art awards. She is a frequent contributor to Wood Carving Illustrator and Scroll Saw Workshop magazines. Walters resides in Upwey, Victoria, Australia.

Tablesaw Techniques, DVD

Tablesaw Techniques, DVD
$19.95

Marc Adams shares his knowledge and decades of experience in Tablesaw Techniques, an instructional video in the Fine Woodworking Workshop Series. Skill and safety go hand-in-hand. Because of their versatility, tablesaws are popular and a fixture in most workshops. They are also powerful tools that require respect and proper safety precautions when in use. That's why Marc demonstrates a multitude of ways to tap the full potential of the tablesaw with an emphasis on safety first. New and advanced woodworkers will benefit from sharing Marc's time-tested knowledge of the tablesaw, upgrades every saw needs, and important safety measures. 49 minutes. Contents: Introduction: Marc Adams offers an overview of the topics he'll cover in his guide to Tablesaw Techniques.Episode 1: Tablesaw SafetyEpisode 2: RippingEpisode 3: CrosscuttingEpisode 4: Build a Crosscut SledEpisode 5: Gearing Up for Tablesaw JoineryEpisode 6: Grooves, Dadoes, and RabbetsEpisode 7: Tongues, Tenons, and Miters About Marc Adams: Marc Adams has been woodworking professionally for more than 28 years. In 1991, he became a technical consultant to the WWPA, SFPA, AHEC, and the U.S. government, representing the United States on International Quality of Furniture Making. His work has appeared in Design Book Six and Design Book Seven, and his shop was featured in "The Workshop" by Taunton Press. Marc has won the Indiana Artist/Craftsman of the Year award three times and does TV and radio talk shows on woodworking topics. His "Technical Technique" video series is the largest-selling video series in the history of woodworking, and he was recently awarded four "Telly" awards. brightcove.createExperiences();

A Lesson Plan for Wood Turning, Book

A Lesson Plan for Wood Turning, Book
$19.95

If you've always wanted to take a woodturning class to learn the basics of the craft or to brush up on your skills, now's your chance with this complete and easy-to-follow course from artist and professional instructor Jim Rodgers. A Lesson Plan for Woodturning maps out everything you need to know, from safety and tools to the basic techniques that will have you quickly turning bowls, boxes and even baseball bats. Packed with step-by-step instructions, illustrations and photographs, A Lesson Plan for Woodturning is the self-directed course that will have you mastering the essential skills of woodturning at your own pace. Paperback. 112 pages. Contents: Getting Started—Turning Between CentersKeeping Your Tools SharpYour First ProjectsIntroduction to Faceplate TurningTurning Your First BowlTurning Your First PlatterWorking with Green WoodTurning a Natural Edge BowlEnd Grain TurningEnd Grain Boxes—Making Things FitCompleting Your ProjectsWhere to Go NextAppendix About the Author: Jim Rodgers is a professional educator who has been teaching woodturning to both adults and youths for over a decade. Rodgers holds California teaching credentials in both Adult Education and Career Technical Education focusing on woodworking. He is also the founder and senior instructor at the Mount Diablo Woodturning Center. Rodgers lectures throughout the United States, has published many articles on woodturning, and maintains a website with teaching and student support materials.

Rockler Universal Dust Port Bracket

Rockler Universal Dust Port Bracket
$18.99

Get dust collection at your lathe, chop saw, sanding station and more. This clamping bracket allows you to attach a dust port to almost any surface, including roller stands, sawhorses and workbenches. Included hose clamp works with all 4" hose and fittings. Swivel action allows you to direct suction where you need itFeatures:Clamping bracket with integral knob adjusts from 7/8" to 2-7/8", allowing you to attach a dust hose to almost any roller stand or sawhorse.Works great with Rockler Roller Stands and the Tabletop Dust Fitting, 26412 (sold separately).Used with the Tabletop Dust Fitting (26412), it becomes the perfect dust collection solution for lathes, miter saws, drill presses, disc sanders and more.Included hose clamp works with all 4" hose and fittings.Swivel action allows you to direct suction where you need it.Chop Saw Application: No need to mess with the tiny dust bag that came with your saw - now you can utilize the full strength of your dust collector.Sanding Application: Keeps fine dust away from your face.Lathe Application: Ideal for lathe work, whether benchtop or free-standing.

Pages: first pageprev page12 13 14 15 16 17 18 19 20 21next pagelast page