This 3'' Dog Peg is for use with the Armor P7-HH Auto-Adjust Hold-Down Dog Clamp (52133, sold separately). In some situations-if your workbench is fitted with drawers, for example-the standard 7-1/2'' peg may extend too far beneath the table. This 3'' option still provides some height adjustability without obstructing the operation of drawers or running into stored items beneath the bench.
Simply secure your frame in the corner clamp, press down on the lever, and the Logan Studio Joiner inserts a metal V-nail to create a perfect, permanent joint, just like you would get at a framing shop. The joiner can be used with moldings up to 2-1/2" wide, and includes adjustable supports so you can assemble frames of unlimited size. Includes 200 V-nails to get you started. Made in USA. Drives a single v-nail, one at a time, repeatable for moldings up to 2-1/2" wide.Magnetic nail holder eliminates dropped nails.Quick-adjust corner clamp holds joint firmly together while the nail is driven.Quick depth setting adjustment.Drives a variety of V-nail sizes.Includes support piece for tippy molding profiles.Also includes two adjustable height levelers for joining long moldings.Reinforced baseboard for stability.Steel post sleeves prevent flexing.Anti-slip pad protects molding faces.Can be used on hard or soft woods with appropriate v-nails.Includes (100) 1/4" and (100) 3/8" soft v-nails. Made in USA.
Shop-made clamp racks tend to fall apart over time, especially if the clamps are spaced close together, with narrow "fingers" in between. This unit is fabricated from sturdy galvanized steel to prevent just that problem. Because of the steel, it can pack up to 15 quick-release bar clamps into a space only 24-3/8" long. The pads on your clamps hook over the trough at the back of the rack, so they won't wobble free, and there's no need to close the clamps for storage. The clamp rack is drilled 16" on center for mounting to wall studs, and is also pre-drilled to mount to the Pack Rack Clamp and Tool Storage System (21834, sold separately). Made in USA.Sturdy galvanized steel is extremely durable and resists corrosion.Stores up to 15 quick-release type bar clamps.Pre-drilled 16" on center for mounting to wall studs.Also pre-drilled to mount to the Pack Rack Clamp and Tool Storage System (21834, sold separately).24-3/8" long.Spacers between clamp slots measure 1.33" wide.Clamp storage slots measure 0.3" wide.Accepts most quick-release bar clamps.
Jig Now Includes Drill Bit, Stop Collar, and Stop Collar Wrench for Added Convenience!This is an incredibly affordable doweling jig for woodworkers who want a quick joint without a lot of fussy layout. Many doweling jigs require that you make a mark on the inside edge of the joint, meaning you either have to transfer marks from the face to the edge, or measure and mark with a tape measure. Since this jig is transparent, layout is much simpler. Just set the two parts together and strike a line across the center of the joint. The see-through reference lines allows you to line up the jig perfectly. Clamp it in place, drill and you're done!Also Available from Rockler:Rockler 1/4" Dowel Drilling JigRockler 1/2" Dowel Drilling JigHardened steel drill guide will endure years of abuse.Holes are spaced 3/4" on center.Convenient hanging holePrecise centerline for the joint, plus center lines for two dowelsMeasures 2" x 4-1/2"Drill guide is 3/4" thick, perfect for 3/4" face framesJig is designed to center dowel holes on 3/4" thick stock.Jig includes Drill Bit, Stop Collar, and Stop Collar Wrench