Oh to have another set of hands around the shop! If you work alone, you'll appreciate having a few of these light-duty clamps at the ready when assembly time comes. A little hardwood scrap is all that's required.
The new TS29 Tilt/Slide Shaper is ready to tackle any job. A new fence design includes dual digital readouts, micrometer adjustments and independently adjustable fence halves for fast, accurate set-ups. The full guard includes two stock hold-downs and a see-through cover that flips up for quick tool changes. Dual dust collection ports, in the guard and under the table insure a clear work area and improved finish. An extra large quill assembly with a full seven inch stroke has three oversize bearings and the ability to tilt, adding versatility and insuring long, trouble-free performance. Powered by a big 7-1/2HP motor that drives the spindle forward and reverse with five speeds. The massive sliding table is fully supported by six tapered precision bearings through a full four-foot stroke. In addition, on board the table is a large miter head complete with stock hold-down clamp and a 56" miter fence with flip stop. The large table can easily accommodate a stock feeder for longer production runs.Sliding table with 4-foot stroke works with miter head, hold-down and fence to accomodate everything from multiple end cuts to tenonsFully adjustable fence with dual digital readout for fast, accurate set-up and repeatabilityLarge table with built-in slider with room for stock feeder7" vertical spindle travel allows stacked toolingSpindle tilts negative 5 degrees to positive 45 degrees for increased versatilityLarge diameter multiple table inserts accomodate virtually any size cutterFive spindle speeds in forward and reverse with lighted indicatorSpecifications:Brand:PowermaticDust Collection Minimum CFM Required:800Dust Port Diameter (OD/in.):5 (dual ports)Electrical Controls - Magnetic Starter:24V MagneticFence Size (L x H/in.):46 x 5Fence Travel (Major and Minor/in.):5-3/8 and 3-5/8Height:53inchLength:51inchMaximum Diameter Cutter Above Table (in.):12Maximum Diameter Cutter Below Table (in.):9Model Number:TS29Motor HP:7-1/2HPMotor Phase:3PHMotor Voltage:230/460VNet Weight:1100poundOverall Dimensions:51 x 44 x 53Part Number:1791284Prewired:Prewired 230VReversable:YesRouter Bit Collet Diameter (in.):1/4 and 1/2Ship Weight:1280poundSlide Table Size (in.):11-1/4 x 51-1/4Spindle Diameter (in.):3/4, 1, and 1-1/4Spindle Size Under Nut (in.):3/4 Spindle - 3-1/2, 1 Spindle - 6-1/4, 1-1/4 Spindle - 6-1/4Spindle Speed (RPM):3000, 4000, 6000, 8000, and 10,000Spindle Travel (in.):7Table Inserts:one tilting, two straightTable Size (in.):51-1/2 x 33-1/2Table T-Slot (in.):n.a.Table Travel (in.):49-1/4Tilting Spindle (deg.):5 degrees back, 45 degrees forwardWidth:44inch
Compact and lightweight, the Rockler Double-Edged Scraper fits easily into corners and tight spaces to root out glue, pencil markings, rough grain and more. Keep it in your apron pocket after panel glue ups to rake off the beads of excess squeeze-out as you remove the clamps. The scraper features a rubberized handle for a no-slip, ergonomic grip, and includes one reversible cabinet scraper blade. Blades are simple to sharpen, just clamp the scraper inyour vise and give it a few passes with a file.Technical Details:Double-edged scraper measures 8-1/2"L x 1-11/16"W overall.Steel shaft is 1/16" thick spring steel.Glue scraper includes one reversible blade (two cutting edges).Scraper also features a rubberized handle and convenient hang hole.
Automaxx Bench Klamps automatically adjust for any thickness of material, eliminating the need to readjust the clamp when changing stock. Whether you're clamping a 2x4 or a piece of veneer, one squeeze is all it takes to secure your work. The clamping force is easily set with a thumbscrew, and once set, stays the same for all materials. Bench Klamps slide into bench-mounted Klamp Traks andKlamp Plates (sold separately), providing a versatile 360-degree benchtop clamping station. Use them singly or in combination for a variety of woodworking tasks. Kreg Automaxx Klamps are also available as a standalone Face Klamp.Technical Details: Bench Klamps are compatible with Kreg Klamp Plate, Klamp Trak, and Klamp Vise PlateAuto Adjust technology automatically adjusts to any thickness.Clamps materials up to 4-1/2" thick.Easy-to-regulate clamping force using a simple thumbscrew.Extra-large padded clamp spreads clamp pressure evenly.Ergonomic padded grips prevent hand fatigue.Heavy-duty all-metal construction.