FlexCut Beginners Palm Knife Set

Make your beginning carving experience a good one with this affordable 4-Pc. Beginner Palm and Knife Set from Flexcut! This all-purpose set handles a wide range of cutting projects like caricatures, walking sticks, tableware, and more. Includes one cutting knife, detail knife, and two palm tools, all with carbon-steel blades that are precision-machined and triple heated treated to harden the cutting edge so it stays sharp. Carved ash handles allow for extended use without hand fatigue. Made in USA.Technical Details: Flexible knives are made with edge holding steel for smoother cutting Ergonomically designed ash handles allow for long periods of carving without hand fatigue Cutting Knife is a great all-purpose woodcarving tool that can handle a wide range of carving projects Detail knife has a finer blade for doing close work and carving the smallest of details Both Palm tools fit comfortably in the palm of your hand and are designed for those who like to carve close to their work or are working on a project that's difficult to clamp in a vise All hand-sharpened blades are made of carbon-steel, precision-machined, and triple heated to harden the cutting edge so it stays sharp Made in USA

$69.99
Buy
 

Related Products

4-1/4'' Reach Hold-Down Clamp

4-1/4'' Reach Hold-Down Clamp
$13.99

Use this clamp for wedging the workpiece against your bench. 4-1/4" reach. 8-1/4" long. 11/16" diameter.

Stainless Steel Pizza Cutter Turning Kit, Brass Finish

Stainless Steel Pizza Cutter Turning Kit, Brass Finish
$19.99

Robust, well-balanced hardware 3X the weight of competing cutters and a sharp 4" diameter stainless steel blade make this kit a must have for pizza lovers. Simply make your own creative handle (not included) to complete your cutter with personalized flair. Kit includes a 5/16" threaded insert to attach the handle and to remove it for dishwasher cleaning. A 7/16'' drill bit is required for soft woods or a 1/2'' drill bit for hardwoods. Patent pending. Also available in a chrome finish.See our complete line of Turning Stock to complete your project. Methods to consider for installing the threaded insert are:Use the pizza cutter/bottle opener mandrel (#43469 Sold Separately) and chuck in your drill press. Tighten the two nuts on the insert so it won't spin on the bolt. After the pilot hole is drilled in the stock, clamp your stock with a handscrew or a drill press vise and manually turn the drill press chuck to drive the insert into the stock. Safety Tip: MAKE SURE DRILL PRESS IS UNPLUGGED. The drill press will keep the insert square to the stock as it is threaded in. We also recommend using beeswax, screw lube, or even soap to lubricate the threads on the insert. This process can also be done on a lathe using a three jaw chuck in the tailstock to manually feed the insert into the stock. And finally, if you're using acrylics for your handle, we have found that heating the insert before installing it makes it go in like a hot knife in butter.

Trim Clip Miter Aid

Trim Clip Miter Aid
$14.99

Marking and measuring the inside dimension of a mitered piece of casing can be a challenge with no place to hook your tape-especially if the trim piece is long. Not so with the Miter Aid. Simply clip it on with the integral spring clamp, and the Miter Aid provides a slot for your tape measure, perfectly aligned with the inside corner of a 45° miter. No need for an assistant and no need to measure from the one inch mark and subtract. The Miter Aid also provides a handy reveal fence for marking your reveals on the jambs, header and sill. Once the reveals are marked, tap in a pin nail where the inside of the miter will be, hook your tape over the nail, and measure your width and height with ease. If you've ever fumbled with a floppy tape while casing out windows and doors, you'll love the ease and simplicity of the Trim Clip Miter Aid. Made in the USA.Technical Details:Miter Aid was developed by a contractor with over 25 years of experience and 25 years of frustration caused by the lack of a reliable method to accurately measure trim for windows and doors. He took it upon himself to design a tool that allows anyone to precisely measure even the longest pieces of trim the first time and every time, thus eliminating the need for multiple cuts and wasted trim.Integral spring clamp holds the Miter Aid in place-excellent for long trim pieces.Built-in reveal fence allows you to quickly mark 1/4" reveals on all four corners.Lightweight, durable construction.Bright yellow color makes it easy to find on the jobsite.Compact size-slip it in your pocket, or clip it to your belt.Designed for 45° miters only.