With jaws that stay perfectly parallel, these clamps are ideal for accurate clamping of casework and drawers. The unique handle doubles as a clutch - just pull up to disengage. Clutch prevents clamp head from sliding down and pinching your fingers while on the clamp rack. The bar has no serrations, so the jaws slide smoothly and dried glue flakes off easily. Non-marring jaws are a full 2" in width to spread clamping pressure over a greater surface area. Extra long screw thread gives a long clamping reach. Removable foot allows you to reverse the head for use as a spreader. 3-3/4" throat depth. For better alignment, see our Rockler Parallel Clamp Blocks. The unique design guarantees parallel alignment for strong, solid holds.
Organize your bulky parallel clamps once and for all. This specially designed rack holds all brands of parallel clamps - up to 12 in all - for easy and convenient storage. Pre-drilled holes are 16" on center for simple mounting to wall studs. Slotted holes are for attachment to the Pack Rack (21834, sold separately). Simply drill corresponding holes in the Pack Rack to attach the Parallel Clamp Rack to store parallel clamps up to 50" in length. Durable galvanized steel construction. 24" long.
Shop-made clamp racks tend to fall apart over time, especially if the clamps are spaced close together, with narrow "fingers" in between. This unit is fabricated from sturdy galvanized steel to prevent just that problem. Because of the steel, it can pack up to 15 quick-release bar clamps into a space only 24-3/8" long. The pads on your clamps hook over the trough at the back of the rack, so they won't wobble free, and there's no need to close the clamps for storage. The clamp rack is drilled 16" on center for mounting to wall studs, and is also pre-drilled to mount to the Pack Rack Clamp and Tool Storage System (21834, sold separately). Made in USA.Sturdy galvanized steel is extremely durable and resists corrosion.Stores up to 15 quick-release type bar clamps.Pre-drilled 16" on center for mounting to wall studs.Also pre-drilled to mount to the Pack Rack Clamp and Tool Storage System (21834, sold separately).24-3/8" long.Spacers between clamp slots measure 1.33" wide.Clamp storage slots measure 0.3" wide.Accepts most quick-release bar clamps.
This Spur Center is just the answer for turners who use their Nova Chuck most of the time, and don't want to have to remove the chuck for spindle work. Just clamp the Spur Center into your chuck, and you're ready to go. It's a rugged, 4-pronged spur drive with a square shank that fits snugly into your Nova chuck jaws. Inward and outward creep is totally eliminated, as the shank is slotted to allow the chuck jaws to close over it. With wedge-shaped prongs at the center, and at each corner, you get five points of contact for a firm grip on your turning blank. Allows you to quickly mount a spur center on your chuck—no need to ever take the chuck off your lathe.Ideal for the bowl turner who also does some spindle work.19mm (3/4") square shank.