Get perfectly flush pocket hole joints and square frames with this innovative assembly table. Simply slide your parts against the stops, clamp in place and drive your screws! Aluminum Klamp Trak features a channel that accepts sliding Klamp Block stops and Bench Klamps (Klamp Table includes 2 Bench Klamps). Adjustable Klamp Blocks quickly square up your frame, position the pieces and center the joint line beneath the Bench Klamp clamping pad. The Bench Klamps rotate 360° for easy positioning from any point on the track. Spacious 21-3/4" x 33-3/4" work surface is coated with glue-resistant melamine for non-stick clamping and easy clean-up. Combine with the Kreg Universal Steel Stand for a sturdy work station/clamping system (sold separately).Technical Details:Klamp Blocks can be flipped and rotated for four different stock widths: 1-1/2", 2", 2-1/2" and 3".Bench Klamps swivel 360° for intermediate widths.Klamp Blocks are notched so dust slides underneath, allowing perfect positioning every time.Aluminum Klamp Traks are lightweight with a durable anodized finish.Table edging holds up to the inevitable bumps and bruises.Melamine work surface sheds glue easily. Simply let dry and scrape it away with a putty knife.Includes table, one 21-3/4" Klamp Trak, one 33-3/4" Klamp Trak and five Klamp Blocks.Klamp Table includes two Bench Klamps
Just lay the jig on your stock, tighten the two horizontal tracking knobs and start drilling error-free rows.Guarantees each row is perfectly in lineSpaces each hole exactly 37mm from the edge of your stockJig is easy to set up and easy to adjust for multiple rowsRows are spaced exactly 1-1/4" (32mm) apartPin holes are set back exactly 1-7/16" (37mm) from each edge32mm spacing and 37mm setback are fully compatible with the Euro hinge system24" long twin template tracks are joined by rigid rails that lock in place for error-free drillingDrill two rows with one jig to save time and ensure accuracyLocking 3-star tracking knobs allow for adjustments and ensure the jig stays firmly in placeReversible guide rails have a smooth aluminum surface on one side and a rubber fence on the other for better gripping powerIncludes two 5mm and two 1/4" indexing pins that eliminate the need for clamps and allow you to extend long rows of holes indefinitelyIncluded indexing pins store conveniently in the ends of each guide rail when not in useDrilling template is made of thick acrylic for durabilityDesigned for un-assembled cabinet components from 8-1/4"W to 25-1/4"W Self-Centering Drill Bits:Self-centering bits are pre-set to bore a consistent depth for perfect fitting shelf pins and sleeves every time. No adjustments are necessary! Various bit sizes available separately for both shelf pins and shelf pin sleeves. Decorative metal shelf pin sleeves provided added shelf strength.#40604 - 1/4'' Bit for 1/4'' Shelf Pin#40608 - 5mm Bit for 5mm Shelf Pin#41983 - 9/32'' Bit for 1/4'' Shelf Pin Sleeve#41981 - 7/32'' Bit for 5mm Shelf Pin Sleeve
Tired of spring clamp sets loaded with sizes you're unlikely to use? This 10-piece spring clamp set has woodworkers' needs in mind. It's an assortment of sizes “ four 3" capacity clamps, four 2" capacity clamps and two 1" capacity clamps. Clamps are made from high-strength nylon with glass fiber for durability. Pivoting jaw pads accommodate a variety of angles.Features:Large spring clamps are 9'' long with a 3'' jaw opening.Medium spring clamps are 6'' long with a 2'' jaw opening.Small spring clamps are 4'' long with a 1'' jaw opening.Comfortable molded nylon with strong spring action.
All you need is a table with a 3/4'' hole in it to use this incredibly convenient hold-down clamp. Just drop it into any 3/4'' dog hole and it rotates 360° to clamp at any angle. The spiral aluminum dog peg is a full 7-1/2'' long for plenty of height adjustability, while the clamping pad can be adjusted laterally for more or less throat depth. Perhaps best of all, clamping pressure is automatically adjusted when you close the lever! The pressure is adjustable if needed-just turn the adjustment screw. Once set, it stays the same for all stock thicknesses. Try it out for yourself to see how fast and versatile it is! Auto-Adjust: Armor's Auto-Adjust technology automatically adjusts to variations in workpiece dimensions while maintaining consistent clamping pressureAdjustable Clamping Pressure: The integrated adjustment screw is used to create a wide range of clamping pressures. Rotate the screw clockwise to decrease and counterclockwise to increase the clamping forceStrong, Lightweight: Auto Clamps are constructed of ZAMAK Zinc alloy, which allows for an incredibly strong, lightweight toolOne-Handed Operation: Armor's Auto-Pro AutoClamps are designed for one-handed operation, a huge advantage over the competitionLarge Soft-Grip Handle: Horizontal handle features soft insets for maximum grip and comfortIf you do not have a peg table, simply drill a 3/4'' hole in any worktable (Recommended minimum table thickness is 3/4'')