More than just a clamp rack, this is a full-service mobile work station and storage solution! Load both sides to the hilt with clamps, and use the interior space to store everything from air compressors to dust collectors. Four included hooks make it simple to install a shop-made storage shelf, while four high-quality polyurethane casters let you roll the entire rig anywhere in the shop. The heavy-duty 5/8" diameter steel rods are strong enough to hold a full row of clamps and simultaneously support a shelf filled with tools. The steel rods can be repositioned in 13 mounting holes. Solid steel construction for maximum strength and stability. Uses carriage bolts for one-wrench assembly.We're excited about the new Pack Rack's space-saving and shop-organization potential, and we can't wait to hear what you think! Click here to download revised instructions.Technical Details:Large shop users who move a lot of tools around the shop will love the Pack Rack's mobility and storage capacity.It works equally well in a small shops, where organization and storage are crucial31"L x 24"W x 58"HAccessories: Steel Top Cap (25020 Sold Separately) creates even more storage space on top of the rack.Additional Shelf-Hooks (20873) allow for more catchall interior storage. Additional Clamp Rods (22130 Sold Separately) add clamp-holding capacity. Long Clamp Rods (20303 Sold Separately) extend to the side, allowing you to store longer clamps. Parallel Clamp Rack (38498 Sold Separately)
The Pock-it Hole Clamp with a new Quick Release features a unique design that inserts a built-in adjustable pin into a 3/8" x 15° pocket hole, giving you perfect alignment every time. Now setups are even quicker and easier with the new quick-release slide button to snug up your fit, then use the ratcheting handle for final tightening. The clamp has all the clearance you need to clamp and fasten double joints in one easy step. Simply clamp the joint using one hole, then insert a screw in the other hole and tighten. Works perfectly with 3/8" pocket holes on 3/4" thick face frames and casework, and stock up to 3" wide.Unique design allows easy clamping and surface alignment of pocket hole jointsThe adjustable pin fits in a 3/8" x 15° pocket hole while the clamp tightens the joint Works in 3/8" pocket holes on 3/4" thick face frames and caseworkClearance in the clamp body enables clamping and fastening of double joints in one easy step Ratcheting handle allows for clamping face frames flat on the workbenchTighten or release the handle quickly and easily using the new quick-release slide button 3" wide stock capacity
Once attached to a bench or fixture, this clamp works great as a quick-action hold down for jigs or as a simple way to secure a work piece. Its holding capacity is approximately 200 pounds.Bottom of rubber foot adjusts from 1/4" above mounting surface to 3/8" below mounting surface. Total length with arm extended and T-handle up is 2-5/8". Height is 2-1/4".Mounting plate is 1-9/16" W x 1" L.Does not include mounting screws.
This hands-free holder lets you refer to your tablet or smartphone while you work in the kitchen or workshop. Use it to keep recipes, cut lists, diagrams or downloaded instructions easily viewable, and at eye level, or just to tune in to the news as you work. Unlike screw-mounted tablet holders, it can be moved from place to place with ease using the fast-action mounting clamp. And unlike freestanding units, it won't take up counter space. The mount can be pivoted up to 180°, the height easily adjusted, and your tablet positioned in three tilt slots to provide the best viewing angle from multiple positions, and to minimize glare. 2'' overhang required. Also available in a Cabinet Mount version (52119, sold separately). Installs easily and removes in seconds - no tools neededAttaches to almost any table, shelf or island with at least 2'' of overhangFits 4''-14'' smartphones, tablets and e-readers; case compatibleProtects your technology investment by raising it off of the work surface and protecting it from spills and other debrisLocks to secure your device-more stable than similar productsHolds device either horizontally or verticallyEasily adjustable to reduce glareSwivels 180° for optimal viewingThree tilt angle settingsConstructed of durable powder coated metal and high density plasticArrives fully assembledComplete instructions included1-year Manufacturer's Warranty Upper Desk's Portable Tablet Mount was recognized by the International Housewares Association (IHA) as a 2014 IHA Innovation Award Finalist.