The Sjobergs Elite cabinetmaker's workbenches are made in Sweden to the very highest standards. Designed to totally eliminate any vibration, rocking or racking, they are suitable for the most demanding professionals. For maximum strength, the top is constructed with full-length laminations of knot-free European beech, without any ugly splices. Solid beech is also used in the preassembled trestle frames, and the entire bench is treated with top-quality oil. The tops are just under 3-3/8'' thick in the middle, joined with tongue and groove joints for consistent flatness. The skirt around the edge is a sturdy 4-5/16'' in height. The two massive pre-mounted vises, made in Sweden exclusively for Sjobergs, boast a 5-3/4'' opening capacity, and slide along fully adjustable guide rails to eliminate any jaw misalignment. If you are left-handed, the front vise can be moved to the other side of the bench, and the top rotated 180°. The bench also includes four solid steel bench dogs with side springs, while double rows of dog holes permit even the toughest clamping jobs using either vise. The heaviest, most durable benches in the Sjobergs line-built from solid beech and treated with top-quality oilMassive vises are 29'' wide with a 5-3/4'' opening capacityDouble rows of bench dog holes extend from both vise locationsTrestle is also pre-drilled with dog holesIncludes four unbreakable 1'' round steel bench dogs that can be used in both the benchtop and the trestleVises can be rotated for both left- and right-handed useOptional Height Adjustment Blocks (56753, sold separately) raise the working height by 3-1/2'' for taller woodworkers
Bessey K-Body Revo Parallel Clamps: For high pressure clamping (nominal force of 1500 lbs.), 90 degree clamping, or powerful spreading, the new K-Body REVO is an ideal choice. Its large, parallel jaws are uniquely designed to distribute even pressure across the entire surface of your work to stop bowing, turning, and lifting. The K-Body's updated design includes three removable jaw protection caps to help prevent wear. They are repellent to glue, easily replaceable, and resist paint and grease solvents. A quick-release feature allows the movable jaw to slide up and down the rail by simply angling the comfortable Power-Grip handle. Plus, each clamp includes two slip-on workpiece supports that attach to the rail, providing a stable base and preventing direct contact between the clamp and the actual workpiece. Compatible with K-P clamp blocks and the K-Body Clamp Extender.Bessey K-P Clamp Blocks: This rail and stile clamping kit from Bessie provides perfect squareness when clamping doors, frames, and more. K-P Blocks allow you to cross your clamps without interference while maintaining vertical clamp bodies.They are excellent for raised panel doors, entrance doors, cabinets, window frames, picture frames and boxes. The blocks are compatible with all K-Body clamps from 12'' to 98'', and can mount directly to your work surface as a permanent jig.
All you need is a table with a 3/4'' hole in it to use this incredibly convenient hold-down clamp. Just drop it into any 3/4'' dog hole and it rotates 360° to clamp at any angle. The spiral aluminum dog peg is a full 7-1/2'' long for plenty of height adjustability, while the clamping pad can be adjusted laterally for more or less throat depth. Perhaps best of all, clamping pressure is automatically adjusted when you close the lever! The pressure is adjustable if needed-just turn the adjustment screw. Once set, it stays the same for all stock thicknesses. Try it out for yourself to see how fast and versatile it is! Auto-Adjust: Armor's Auto-Adjust technology automatically adjusts to variations in workpiece dimensions while maintaining consistent clamping pressureAdjustable Clamping Pressure: The integrated adjustment screw is used to create a wide range of clamping pressures. Rotate the screw clockwise to decrease and counterclockwise to increase the clamping forceStrong, Lightweight: Auto Clamps are constructed of ZAMAK Zinc alloy, which allows for an incredibly strong, lightweight toolOne-Handed Operation: Armor's Auto-Pro AutoClamps are designed for one-handed operation, a huge advantage over the competitionLarge Soft-Grip Handle: Horizontal handle features soft insets for maximum grip and comfortIf you do not have a peg table, simply drill a 3/4'' hole in any worktable (Recommended minimum table thickness is 3/4'')
The powerful magnetic base on this height gauge clamps itself to any ferrous metal surface for setting the precise height of your saw blade, dado blade or router bit with an accuracy of 0.001". Also great for aligning jointer knives. The MiniMag Digital Height Gauge features a large LCD display with readings in either fractions or millimeters. It is sealed to resist water, oil and dust, making it ideal for the workshop environment. Extra battery included.Technical Details:3-Read display in inches/ mm / 1/128".IP54: splash water, oil, and dust resistant. Horizontal display. Large LCD display.Silver finish.US engineered and Patent Pending. Solid aluminum alloy base with magnets. Hardened stainless steel beam. ABS: absolute / incremental read. Hold function. Power saving 5 minute auto power off. SPC data output. Measure range: 0 - 6" / 0 - 150mm. Accuracy: 0.001".