Sjobergs Elite Workbench 2000

The Sjobergs Elite cabinetmaker's workbenches are made in Sweden to the very highest standards. Designed to totally eliminate any vibration, rocking or racking, they are suitable for the most demanding professionals. For maximum strength, the top is constructed with full-length laminations of knot-free European beech, without any ugly splices. Solid beech is also used in the preassembled trestle frames, and the entire bench is treated with top-quality oil. The tops are just under 3-3/8'' thick in the middle, joined with tongue and groove joints for consistent flatness. The skirt around the edge is a sturdy 4-5/16'' in height. The two massive pre-mounted vises, made in Sweden exclusively for Sjobergs, boast a 5-3/4'' opening capacity, and slide along fully adjustable guide rails to eliminate any jaw misalignment. If you are left-handed, the front vise can be moved to the other side of the bench, and the top rotated 180°. The bench also includes four solid steel bench dogs with side springs, while double rows of dog holes permit even the toughest clamping jobs using either vise. The heaviest, most durable benches in the Sjobergs line-built from solid beech and treated with top-quality oilMassive vises are 29'' wide with a 5-3/4'' opening capacityDouble rows of bench dog holes extend from both vise locationsTrestle is also pre-drilled with dog holesIncludes four unbreakable 1'' round steel bench dogs that can be used in both the benchtop and the trestleVises can be rotated for both left- and right-handed useOptional Height Adjustment Blocks (56753, sold separately) raise the working height by 3-1/2'' for taller woodworkers

$2,060.00
Buy
 

Related Products

HiPurformer Glue Gun Only

HiPurformer Glue Gun Only
$119.99

The Titebond HiPurformer Hot Melt Glue Gun delivers polyurethane adhesives that set faster and work better than traditional hot melt adhesives! Titebond glue sticks (sold separately) are tailored to your application for best results: WW = Wood to Wood, MP = Multi Purpose designed to bond most common materials (e.g., melamine, ceramics, metal, marble, etc.) All are waterproof, provide strong, permanent bonds and reduce the need for clamping or bracing. For many applications, the system can eliminate the use of nails or staples, reducing time and money in filling, sanding and staining repair marks.Features:Cordless ApplicatorDurable Trigger components for refined adhesive controlHeating Cylinder houses cartridges for extended useDripless tip for clean precise useLightweight ergonomic design with soft grip handle reduces user fatigueMechanical feed insures continuous glue streamResists Temperatures from -20° F To +275° FBest used with:27642 Titebond WW60 Polyurethane Hot Melt Adhesive27650 Titebond MP75 Polyurethane Hot Melt Adhesive39400 Titebond MP300 Polyurethane Hot Melt Adhesive

Rockler Stainless Steel Pizza Cutter Turning Kit, Pewter Finish

Rockler Stainless Steel Pizza Cutter Turning Kit, Pewter Finish
$19.99

Cut any pizza with ease-a must-have for pizza lovers! Robust, well-balanced hardware is 3X the weight of competing cutters and features a sharp 4'' diameter stainless steel blade. Just add your own custom handle (not included) to top it to your taste. Kit includes a 5/16'' threaded insert that lets you attach the handle or remove it for dishwasher cleaning. A 7/16'' drill bit is required for soft woods or a 1/2'' drill bit for hardwoods. Patent pending. Also available in brass or chrome. See our complete line of turning stock to turn the handle for your pizza cutter. Methods to consider for installing the threaded insert: Use a 5/16'' bolt and double nuts on a drill press. Cut the head off a 5/16'' bolt and chuck it in a drill press. Then thread on two nuts and the insert so that it is flush with the end of the bolt. Tighten the two nuts on the insert so it won't spin on the bolt. After the pilot hole is drilled in the stock, clamp your stock with a handscrew or a drill press vise and manually turn the drill press chuck to drive the insert into the stock. DO NOT TURN ON THE DRILL PRESS. The drill press will keep the insert square to the stock as it is threaded in. We also recommend using beeswax, screw lube, or even soap to lubricate the threads on the insert. This process can also be done on a lathe using a three jaw chuck in the tailstock to manually feed the insert into the stock. Finally, if you're using acrylics for your handle, we have found that heating the insert before installing it makes it go in like a hot knife in butter.

Triton TA1200BS 3'' Belt Sander

Triton TA1200BS 3'' Belt Sander
$169.99

By moving the primary handle to the rear of the tool, Triton's engineers have created a belt sander that can be turned upside down for use as a stationary sander. The included clamps slip into a pair of openings in the housing, firmly holding the sander to the bench. This is an ideal feature for sanding small or delicate parts. The front bail handle can also be pivoted out of the way for this purpose, or pivoted vertically so you can get the nose up close to a wall when sanding wood floors, for example. One side of the sander is also flush with the belt for the ability to sand directly up against a wall. The powerful 10A motor with variable speed control promises rapid stock removal and the ability to tailor the tool to your task. Small diameter front roller improves sanding in confined areas and detail work. Side dust port connects to included dust bag or vacuum system. Includes inversion clamps, dust bag and sanding belt.Features: Powerful 1200W motor for rapid stock removalVariable speed control improves versatility when working with different workpiecesSide dust port connects to the supplied dust bag or dust extraction systemBelt tracking adjustment for accurate alignment of the sanding beltRubber over-moulded grip offers increased support, safety & control of the toolLock-on button adds convenience with extended useSmall diameter front roller allows for sanding in confined areasPower-on neon increases operator safetyRemovable bail handle increases support & safetyEasy access brushes allows changing of worn brushes