The Sjobergs Elite cabinetmaker's workbenches are made in Sweden to the very highest standards. Designed to totally eliminate any vibration, rocking or racking, they are suitable for the most demanding professionals. For maximum strength, the top is constructed with full-length laminations of knot-free European beech, without any ugly splices. Solid beech is also used in the preassembled trestle frames, and the entire bench is treated with top-quality oil. The tops are just under 3-3/8'' thick in the middle, joined with tongue and groove joints for consistent flatness. The skirt around the edge is a sturdy 4-5/16'' in height. The two massive pre-mounted vises, made in Sweden exclusively for Sjobergs, boast a 5-3/4'' opening capacity, and slide along fully adjustable guide rails to eliminate any jaw misalignment. If you are left-handed, the front vise can be moved to the other side of the bench, and the top rotated 180°. The bench also includes four solid steel bench dogs with side springs, while double rows of dog holes permit even the toughest clamping jobs using either vise. The heaviest, most durable benches in the Sjobergs line-built from solid beech and treated with top-quality oilMassive vises are 29'' wide with a 5-3/4'' opening capacityDouble rows of bench dog holes extend from both vise locationsTrestle is also pre-drilled with dog holesIncluded cabinet with doors and drawers offers convenient tool storage and added mass, which further eliminates vibrationIncludes four unbreakable 1'' round steel bench dogs that can be used in both the benchtop and the trestleVises can be rotated for both left- and right-handed useOptional Height Adjustment Blocks (56753, sold separately) raise the working height by 3-1/2'' for taller woodworkers
The EZ-One Woodworking Center can quickly dimension both sheet goods and solid lumber with precise repeatable rip cuts, crosscuts and miter cuts, all with no tear-out, no kickback, and no danger of pushing the wood into a spinning blade. The unique bridge system raises and lowers the guide rail with a single lever, and once lowered, safely holds even the smallest pieces of wood in place without clamps. Zero-clearance support on both sides of the blade result in clean, professional-quality edges. For repeated cuts, precision stops can be set up to hold the wood in place. A variety of accessories are available, allowing you to customize the system to meet your needs. Made in USA. Combines multiple tools into one system, saving space in smaller shopsIncluded Precision Saw Base can be fitted to virtually any right-bladed 6-1/2'', 7-1/4'' and 8-1/4'' circular saw-no need to buy an expensive specialty sawBridge system firmly clamps workpieces up to 2-1/2'' thick to the table-no clamps required Guide rail can also be removed and used with the saw to make cuts on large sheets without heavy lifting. Guide rail measures 72'' long. Smooth-sliding guide rail interfaces with the Precision Saw Base for laser-straight, wobble-free cutsGuide rail is bi-directional, with two zero-clearance edges-use one for 90° cuts, the other for bevel cutsCapable of gang-cutting stacks and rows of material-cut all four miters at once to save time!3/4'' sacrificial material can be added between the cross rails to create a work surfaceExtrusions on both top and sides accept a variety of stops and clamps (sold separately) to hold material in place when necessary Equipped to handle sheet goods up to 48'' wide
Automaxx Bar Clamps provide perhaps the fastest closing action of any bar clamp. No need to wind a screw or pump a trigger-simply slide the clamp faces together, squeeze the handles, and the clamp locks on with a reassuring "thunk." Pressure is easily adjusted-up to 550 lbs-with the thumb screw, and once set, stays the same no matter what the size of your workpiece. Of course, you also get all the benefits inherent to a standard F-style clamp. When you want the consistent, repeatable pressure of the Automaxx mechanism, but need more clamping capacity, look no further than Automaxx Bar Clamps. Also available in a range of Heavy-Duty models (e.g. 52893) with more pressure (700 lbs) and a larger 2-7/8'' throat depth. Features the same auto-adjusting technology as Kreg Automaxx Bench Klamps and Automaxx Face Clamps, allowing you to quickly clamp a variety of materials and assemblies with strong, consistent clamping pressureAutomatically adjusts to your material thickness, whether it's thick, thin, or in betweenEasy-to-regulate clamping force using a simple thumbscrew-generates up to 550 pounds of pressureHighly durable, all-metal construction will withstand years of rugged useErgonomic padded grips provide comfort and ease-of-use, while extra-large pivoting clamp faces spread clamping pressure evenly
This new compact router from Porter-Cable offers the comfortable ergonomics of a trim router with the power and features of its full-sized brethren. With 1-1/4 hp, it's perfect for a variety of tasks, from trimming laminate, cutting flutes, edge profiling and even mortising with the plunge base (sold separately). The all-metal motor can is designed to stand up to jobsite abuse, and the motor features soft-start and electronic speed control to maintain its speed under loads. An intuitive depth adjustment ring, quick-release tabs and an adjustable clamp make adjustments a snap. The 1/4" collet is extra-long for better contact with the bit, and the spindle lock features a large button and 12 detentes for easy bit changes. Clear sub-base for optimum visibility.