Sure-Foot Aluminum Bar Clamps

Get all the great features of the aluminum Sure-Foot Pipe Clamp in a size that matches your project! This Rockler-exclusive design is available in 24", 36", 48", and 60" lengths. The optional Aluminum Bar and Connector Kit (29608, sold separately) allows you to extend any clamp by 48".Details:Extra wide 2-1/2" foot for exceptional stabilityHigher base that raises the bar 1-1/2" above the table for excellent handle clearanceBuilt-in clamp hook locks onto a 3/4" board eliminating the need to "clamp the clamp" when hanging on a wall

$37.99
Buy
 

Related Products

Rockler High Drawer Lock Router Bit - 1-1/16" Dia x 3/4" H x 1/2" Shank

Rockler High Drawer Lock Router Bit - 1-1/16" Dia x 3/4" H x 1/2" Shank
$44.99

This unique bit is similar to a locking rabbet bit, but it cuts two tongues instead of one for added mechanical strength and additional gluing surface. The wedged profile of the tongues helps everything snug up under clamping pressure, while still exposing valuable long grain gluing surface. To machine your parts, run the drawer fronts flat on the router table and the sides vertically against your fence. Sturdy 1/2" shank.

Frame Clamping Kit with Bessey K-Body Revo Parallel Clamps

Frame Clamping Kit with Bessey K-Body Revo Parallel Clamps
$219.99

Bessey K-Body Revo Parallel Clamps: For high pressure clamping (nominal force of 1500 lbs.), 90 degree clamping, or powerful spreading, the new K-Body REVO is an ideal choice. Its large, parallel jaws are uniquely designed to distribute even pressure across the entire surface of your work to stop bowing, turning, and lifting. The K-Body's updated design includes three removable jaw protection caps to help prevent wear. They are repellent to glue, easily replaceable, and resist paint and grease solvents. A quick-release feature allows the movable jaw to slide up and down the rail by simply angling the comfortable Power-Grip handle. Plus, each clamp includes two slip-on workpiece supports that attach to the rail, providing a stable base and preventing direct contact between the clamp and the actual workpiece. Compatible with K-P clamp blocks and the K-Body Clamp Extender.Bessey K-P Clamp Blocks: This rail and stile clamping kit from Bessie provides perfect squareness when clamping doors, frames, and more. K-P Blocks allow you to cross your clamps without interference while maintaining vertical clamp bodies.They are excellent for raised panel doors, entrance doors, cabinets, window frames, picture frames and boxes. The blocks are compatible with all K-Body clamps from 12'' to 98'', and can mount directly to your work surface as a permanent jig.

Auto-Lock T-Track Hold Down Clamp

Auto-Lock T-Track Hold Down Clamp
$29.99

Tightening Rockler's new Auto-Lock T-Track Hold Down Clamp is literally an open-and-shut case-just press down the lever to secure anything from veneer sheets to lumber up to 2-3/4'' thick! Once set, the clamping pressure is always the same regardless of workpiece size, and is adjusted only if needed with the set screw. The clamp pivots 360°, allowing you to clamp near the workpiece edge to minimize obstructions. A large knurled wheel locks the clamp securely to the T-track. The toggle foot is adjusted with the knurled aluminum knob for best placement-no wrenches required-while the clamping foot pivots on a ball joint so it can adapt to any angle and is rubber coated to prevent marring. Simply lift the lever to release. Auto-adjust mechanism allows you to clamp various thicknesses without readjustingCenter of clamping foot extends from 1-1/2'' to 3-1/2'' from center of trackMax height capacity is 2-3/4''Clamping force is adjustable from 5-250 lbs of pressureLarge locking wheel secures clamp to T-trackClamps slide into any T-track that accepts 5/16'' T-bolts, including our T-Track Table (46654, sold separately) and many of the CNC Shark tablesAn optional Mounting Bracket (57940) is available for securing the clamp to shop-made jigs and fixturesHeavy-duty metal construction