Simple, accurate design and vaunted Biesemeyer quality make this fence a sure-fire favorite on any drill press. The extruded aluminum fence can be oriented vertically to support tall work pieces, or horizontally for easy handling when working with narrow pieces, or when clearance is needed for the chuck. Two cam-action clamps slide along T-tracks in the drill press table-simply close them to lock the fence in position. Flip-down stop is also included, which can be lengthened or shortened depending on the orientation of the fence, and a scale is integrated to make setting the stop a snap.Fence body is 24"L x 2-1/2" x 1".Includes:Fence body (24"L x 2-1/2" x 1") (2) Mounting clamp assembliesLow-profile flip stop assemblyHigh-profile flip stop assemblyKnurled thumb screw for high-profile flip stop extensionNote: This drill press is designed to work with a T-track. If your table has a different size T-slot,the slots are not parallel, or it does not use T-slots, additional hardware or clamps may be required.
Robust, well-balanced hardware 3X the weight of competing cutters and a sharp 4" diameter stainless steel blade make this kit a must have for pizza lovers. Simply make your own creative handle (not included) to complete your cutter with personalized flair. Kit includes a 5/16" threaded insert to attach the handle and to remove it for dishwasher cleaning. A 7/16'' drill bit is required for soft woods or a 1/2'' drill bit for hardwoods. Patent pending. Also available in a chrome finish.See our complete line of Turning Stock to complete your project. Methods to consider for installing the threaded insert are:Use the pizza cutter/bottle opener mandrel (#43469 Sold Separately) and chuck in your drill press. Tighten the two nuts on the insert so it won't spin on the bolt. After the pilot hole is drilled in the stock, clamp your stock with a handscrew or a drill press vise and manually turn the drill press chuck to drive the insert into the stock. Safety Tip: MAKE SURE DRILL PRESS IS UNPLUGGED. The drill press will keep the insert square to the stock as it is threaded in. We also recommend using beeswax, screw lube, or even soap to lubricate the threads on the insert. This process can also be done on a lathe using a three jaw chuck in the tailstock to manually feed the insert into the stock. And finally, if you're using acrylics for your handle, we have found that heating the insert before installing it makes it go in like a hot knife in butter.
The Original Incra Jig:Even the novice woodworker can produce beautiful joinery on the router table.Easily create joints such as dovetails, box and double dovetails with precision.Comes with FREE 1-hour instructional DVD and joint-making templates ($19.99 Value)Fence, stop block and right angle fixture package sold separately.Enjoy precise alignment and repeatability on virtually any power tool in your shop, including router table, table saw, drill press and band saw.Includes box joint template and dovetail & corner post template. Simply set the jig to the color-coded reference marks and make your cuts. No math, no measurements, and no complicated setups.Features ultra precise and parallel steps of 1/32" over a full 8" range; micro adjustable to any position between fixed steps.With absolute positioning accuracy to .002" and repeatability to .001".Plastic body.Easy-to-follow DVD has more than one hour of instructions for setup, how to make dovetails, box joints and other common applications.Fence, stop block and right angle fixture package sold separately. Right angle fixture is made of solid aluminum with 15-ply wood runners. Fence and stop block are made of MDF with durable plastic laminate covering. Pre-drilled for quick and easy attachment to Incra jig.Router bits sold separately. The #91023 1/2" diameter dovetail bit and the #90462 3/8" straight bit provide most all of the dovetail and box cuts that you'll ever need to make.