Tool Box Pencil Hardware Kit with Bushings

Tool Box Pencil Hardware Kit: Woodworkers weary of constantly resharpening broken pencil leads will be delighted with this Tool Box Pencil Hardware Kit. It features a massive lead almost 1/4" thick which allows it to be used on rough lumber much like a carpenter's pencil, with very low risk of breakage. A spring-action claw holds the lead. To advance it, simply depress the end of the pencil and pull it out as desired. The pencil also has a sharpener integrated into the end, and when sharp, works equally well for marking out fine lines. Pencil lead is 7/32'' (5.5mm) thick perfect for marking rough lumber without breaking. Replacement leads available separately (36026). Turning Accessories Needed: Turning Blank (Sold Separately) Pen Turning Mandrel (Sold Separately) 11mm Drill Bit (#30913 Sold Separately) 3-Piece Bushing Set: Bushings are precisely machined to match the diameters of your pencil blanks, allowing you to achieve the smooth, perfectly flush seams so valued in a top quality hand-turned pencil. Simply turn your pencil blanks to match the bushing diameters, leaving a bit of extra material to allow for sanding. The Tool Box Pencil Bushing Set is made of steel—hard enough for excellent durability, yet soft enough to prevent damage to your turning tools.3-piece bushing set.

$13.38
Buy
 

Related Products

Workbench Leg Kit

Workbench Leg Kit
$69.99

If you want a workbench fast, and you want it to last, then this is the kit for you. Combined with only 2x4s and plywood, this kit allows you to create a workbench of any size that will last indefinitely-all in less than an hour. The sturdy resin legs have a greater strength-to-weight ratio than steel, and are specially engineered to combat racking forces and keep the assembly perfectly square. With a weight capacity of up to 1000 lbs. per shelf, it'll hardly break a sweat under as much weight as you can dish out. Use full 4' 8' sheets of plywood for a spacious assembly bench, or throw together a power tool stand as small as 2'x2'. It's the perfect solution for custom sizes, and incredibly easy to modify. No miters, no tricky cuts or joints - all you need is a drill and a saw! Assembled workbench measures roughly 36" tall.Finished work surface can be up to 4'x8'.Rugged resin workbench legs boast a better strength to weight ratio than steel.Assembled workbench boasts a weight capacity of up to 1000 lbs. per shelf.Only straight 90 degree cuts are required.Great for all kinds of work benches: assembly tables, tool stands, potting benches and more!All hardware is included.

Manhattan Pen Tubes, 5-Pack

Manhattan Pen Tubes, 5-Pack
$4.99

Let's face it, every pen turner makes the occasional mistake. But don't worry - this 5-pack of Manhattan pen tubes includes enough brass tubes to make up for five bungled Manhattan blanks. The brass pen tubes are precisely dimensioned for neat alignment of the final pen.Technical Details:Replacement tubes for use with Manhattan Pen Hardware Kits (sold separately: 47863, 43431, 43429, 43435, 46997 etc).Use a 27/64" drill bit to drill the blank before inserting tubes.Glue tubes in place with with medium CA (cyanoacrylate) glue or two-part fast drying epoxy.

Bench Dog Cast Iron Router Table, Pro Fence and Plate

Bench Dog Cast Iron Router Table, Pro Fence and Plate
$599.99

If you're after the ultimate router table top-the pinnacle of size, stability, and durability-look no further than the Bench Dog Cast Iron Router Table. At 24'' x 32'' x 1-1/2'', the Bench Dog Cast Iron Router Table is the largest, flattest and most durable option on the market. And with this package, it's one of the best values too! Weighing in at nearly 100 lbs, the one-piece top provides more than five square feet of ultra-flat work surface, precision ground to within .008''. Its 12-point plate-leveling/locking system guarantees a flush working area and keeps the heavy-duty aluminum router plate (included) secure while cutting. Plus, you get Bench Dog's 32'' ProFence, a precision-milled aluminum fence with two MDF sub-fences, T-tracks on both sides, a 2-1/2'' dust port and an integrated bit guard. Table top built from one solid piece of 1-1/2'' thick cast iron to absorb vibration better than any table on the marketFeatures dual-track with standard miter track and universal T-track which accepts 1/4'' T-bolts, 5/16'' T-bolts and 1/4'' hex boltsHeavy-duty one-piece aluminum fence frame is fully machined on the front and bottom surfaces, ensuring the ProFence is flat, true and squareMDF sub-fences adjust without tools, perfect for zero-clearance setupProFence includes heavy-duty bit guard and dust port on the back of the fenceProFence also features EZ-Load Universal T-tracks that accept 1/4'' and 5/16'' T-bolts as well as 1/4'' hex bolts - perfect for hold-downs, stops and other accessories such as featherboardsRecommended for use with the Rockler Steel Router Cabinet with Dust Bucket (41427, sold separately) or the Rockler Router Table Steel Stand (48426, sold separately). 52790 - Bench Dog Cast Iron Router Table, Pro Fence and Non-Drilled Plate with 3-1/4'' Opening (for Standard Inserts) 59685 - Bench Dog Cast Iron Router Table, Pro Fence and Non-Drilled Plate with 3-11/16'' Opening (for Large Inserts) To choose a pre-drilled plate, find your router below. If it's not listed, choose from two non-drilled plates-one with a 4'' insert ring, and the other a 4-3/8'' insert ring-and drill the plate to fit your router. Plate A routers: Makita 1100; Milwaukee 5615-5624; DeWalt 616-618; Bosch MRC23 Series, 1617-1618; Ridgid 2930 Combo Kit; Hitachi M12VC (fixed and kit); Porter-Cable 690, 890, 7529, 97529 and 8529. Note: Current models of the Porter-Cable 892 require at least two screws to be 1/2" long versus 5/8".Plate B routers: DeWalt DW621 and DW621K; Craftsman Standard; Freud FT 1700E and 1702VCEKPlate C routers: Porter-Cable 7518, 7519, 7538 and 7539; Milwaukee 5625-20; Triton TRA001 and MOF001Plate D routers: Bosch 1619-1619EV; Freud FT2000; DeWalt 625