Dust Grounding Kit

Improve dust collecting safety using this kit. A continuous wire from each dust collection point to the dust collector is recommended.Features:Helps reduce static electricity build-upImproves dust collection system safetyWire is run inside of duct work

$22.99
Buy
 

Related Products

Jet DC-1200VX-BK3 Dust Collector, 2HP 3PH 230/460V, 30-Micron Bag Filter Kit (710703K)

Jet DC-1200VX-BK3 Dust Collector, 2HP 3PH 230/460V, 30-Micron Bag Filter Kit (710703K)
$549.99

The JET DC-1200VX features the exclusive Vortex Cone which improves chip separation to prevent clogging of the filter, and increases packing efficiency of the collector bag. The high air velocity (CFM) stands up to any competitive specifications, and the industrial controls are designed for years of durable use. Collection bags have a snap ring for fast installation and removal. Casters offer maneuverability within the shop. Features:Vortex Cone improves chip separation and collector bag packing efficiencyEliminates premature filter clogging for sustained performanceSingle-stage design for economical and quiet operationIndustrial controls designed for years of trouble-free useQuick-connect collection bags with elastic band for fast, easy installation and removalHigh air velocity (CFM) design stands up to any competitive specificationsPermanently lubricated, totally enclosed, fan-cooled motors are rated for continuous-duty

Powermatic 201HH, 22'' Planer, 7.5HP 3PH 230V, helical Cutterhead

Powermatic 201HH, 22'' Planer, 7.5HP 3PH 230V, helical Cutterhead
$8,519.99

Powermatic 201HH, 22' Planer, 7.5HP 3PH 230V, helical cutterheadHelical cutterhead with knife inserts provides smoother, quieter cutting and finer finish than conventional systemsCast iron 1300 lb. construction for solid performance without vibration2 feed speeds - 20/30 fpm - accommodates rough and fine finish workSegmented infeed roller with sectional chipbreaker allows multiple board planingRoller bearing-mounted feed rollers for long lifeAdjustable bed rollers allow smooth feeding of rough or finished workpiecesOversized cast iron table travels on 2 large lead screws for heavy duty supportDust chute with 5" port for dust collectionStandard Equipment:Dust collection portAdjustable foot padsTool kitSpecifications:Bed Rollers Adjustable from Front:2Blade Size:0.59 L x 0.59 W x 0.10 ThBrand:PowermaticColumn Diameter (in.):2-1/2Cuts Per Minute:n.a.Cutterhead Diameter (in.):3-1/4Cutterhead Speed (RPM):4800Distance Between Rollers - Center to Center (in.):n.a.Dust Collection Minimum CFM Required:900Dust Port Diameter (OD/in.):5Feed Rate (FPM):20 and 30Height:59inchInfeed Roller Diameter (in):3Length:42inchMaximum Depth of Cut (in.):3/16Maximum Full Width Depth of Cut (in.):n.a.Maximum Height of Rollers Parallel to Tabletop (in.):table rollers - 0.05Maximum Opening (in.):n.a.Maximum Planing Thickness (in.):9-1/4Maximum Planing Width (in.):22Minimum Planing Length (in.):10Model Number:201HHMotor HP:7.5HPMotor Phase:3PHMotor Voltage:230VMovement - Horizontal (in.):n.a.Movement - Vertical (in.):n.a.Movement - Vertical (in.):n.a.Net Weight:1350poundNumber of Knives:150 four-sided insertsNumber of Speeds:twoOutfeed Roller Diameter (in):3Overall Dimensions:42 x 49 x 59Part Number:1791268Planing Thickness Range (in.):n.a.Prewired:n.a.Range of Speeds (FPM):n.a.Readout Scale:mm/inRollers (in.):n.a.Rotation (Forward/Reverse):n.a.Segmented Infeed Roller Diameter (in.):3Ship Weight:1430poundSwing (deg.):n.a.Table Height Adjust Manual:1 Turn = 1/16Table Size (in.):32-1/4 x 24Table Support:2-columnTool Supplied:yesWidth:49inch

4'' Dia. Dust Collection Splice Connector

4'' Dia. Dust Collection Splice Connector
$7.99

Splicer units are used to connect full sections of hose for longer runs or to utilize short sections. Ends have a 4" outside diameter.