iVac Pro 4'' Blast Gate

This electronically driven automatic blast gate is an optional upgrade to the iVac Pro Wireless Dust Collection Control System, bringing one-touch simplicity to managing your dust collection airflow. Simply turn on your power tool, and the iVac Pro Tool (42891, sold separately) sends a wireless signal to automatically open the Pro Blast Gate, and another signal to the iVac Pro Switch (42897, sold separately), which turns on your dust collector. Turn off your power tool, and after a short interval to clear dust, the blast gate closes and the dust collector powers down. This automation prevents the irritating dust clouds that result from forgetting to open a blast gate, and the reduced suction that results from forgetting to close it afterward. Prevents the irritating dust clouds you get from forgetting to open the blast gateReduces the potential for accidents from reaching for blast gates while machines are runningOptimizes the suction in your system by keeping a minimum number of gates open at one timeBlast gate can also be controlled with the included toggle switchUp to eight blast gates can operate on one systemA Starter Pack (50767) is also available separately that includes two gates, a wireless remote and a manual toggle switchRF range: 40'

$124.99
Buy
 

Related Products

Dust Grounding Kit

Dust Grounding Kit
$22.99

Improve dust collecting safety using this kit. A continuous wire from each dust collection point to the dust collector is recommended.Features:Helps reduce static electricity build-upImproves dust collection system safetyWire is run inside of duct work

Powermatic 201HH, 22'' Planer, 7.5HP 3PH 230V, helical Cutterhead

Powermatic 201HH, 22'' Planer, 7.5HP 3PH 230V, helical Cutterhead
$8,519.99

Powermatic 201HH, 22' Planer, 7.5HP 3PH 230V, helical cutterheadHelical cutterhead with knife inserts provides smoother, quieter cutting and finer finish than conventional systemsCast iron 1300 lb. construction for solid performance without vibration2 feed speeds - 20/30 fpm - accommodates rough and fine finish workSegmented infeed roller with sectional chipbreaker allows multiple board planingRoller bearing-mounted feed rollers for long lifeAdjustable bed rollers allow smooth feeding of rough or finished workpiecesOversized cast iron table travels on 2 large lead screws for heavy duty supportDust chute with 5" port for dust collectionStandard Equipment:Dust collection portAdjustable foot padsTool kitSpecifications:Bed Rollers Adjustable from Front:2Blade Size:0.59 L x 0.59 W x 0.10 ThBrand:PowermaticColumn Diameter (in.):2-1/2Cuts Per Minute:n.a.Cutterhead Diameter (in.):3-1/4Cutterhead Speed (RPM):4800Distance Between Rollers - Center to Center (in.):n.a.Dust Collection Minimum CFM Required:900Dust Port Diameter (OD/in.):5Feed Rate (FPM):20 and 30Height:59inchInfeed Roller Diameter (in):3Length:42inchMaximum Depth of Cut (in.):3/16Maximum Full Width Depth of Cut (in.):n.a.Maximum Height of Rollers Parallel to Tabletop (in.):table rollers - 0.05Maximum Opening (in.):n.a.Maximum Planing Thickness (in.):9-1/4Maximum Planing Width (in.):22Minimum Planing Length (in.):10Model Number:201HHMotor HP:7.5HPMotor Phase:3PHMotor Voltage:230VMovement - Horizontal (in.):n.a.Movement - Vertical (in.):n.a.Movement - Vertical (in.):n.a.Net Weight:1350poundNumber of Knives:150 four-sided insertsNumber of Speeds:twoOutfeed Roller Diameter (in):3Overall Dimensions:42 x 49 x 59Part Number:1791268Planing Thickness Range (in.):n.a.Prewired:n.a.Range of Speeds (FPM):n.a.Readout Scale:mm/inRollers (in.):n.a.Rotation (Forward/Reverse):n.a.Segmented Infeed Roller Diameter (in.):3Ship Weight:1430poundSwing (deg.):n.a.Table Height Adjust Manual:1 Turn = 1/16Table Size (in.):32-1/4 x 24Table Support:2-columnTool Supplied:yesWidth:49inch

4'' Dia. Dust Collection Splice Connector

4'' Dia. Dust Collection Splice Connector
$7.99

Splicer units are used to connect full sections of hose for longer runs or to utilize short sections. Ends have a 4" outside diameter.