iVac Pro 4'' Blast Gate Starter Pack

This electronically driven automatic blast gate system is an optional upgrade to the iVac Pro Wireless Dust Collection Control System, bringing one-touch simplicity to managing your dust collection airflow. Simply turn on your power tool, and the iVac Pro Tool (42891, sold separately) sends a wireless signal to automatically open the corresponding Pro Blast Gate, and another signal to the iVac Pro Switch (42897, sold separately), which turns on your dust collector. Turn off your power tool, and after a short interval to clear dust, the blast gate closes and the dust collector powers down. This automation prevents the irritating dust clouds that result from forgetting to open a blast gate, and the reduced suction that results from forgetting to close it afterward. The system also ensures that at least one gate stays open when the vacuum is on to prevent overloading the motor on your dust collector. Prevents the irritating dust clouds you get from forgetting to open the blast gateReduces the potential for accidents from reaching for blast gates while machines are runningOptimizes the suction in your system by keeping a minimum number of gates open at one timeBlast gates can also be controlled via the handheld wireless remote or manually with the toggle switchKit includes two blast gates for 4'' hose, two 115v AC adapters, a wireless remote control and a manual toggle switchUp to eight blast gates can operate on one systemAdditional blast gates available separately (52504)RF range: 40'

$239.99
Buy
 

Related Products

iVac Pro 4'' Blast Gate Starter Pack

iVac Pro 4'' Blast Gate Starter Pack
$239.99

This electronically driven automatic blast gate system is an optional upgrade to the iVac Pro Wireless Dust Collection Control System, bringing one-touch simplicity to managing your dust collection airflow. Simply turn on your power tool, and the iVac Pro Tool (42891, sold separately) sends a wireless signal to automatically open the corresponding Pro Blast Gate, and another signal to the iVac Pro Switch (42897, sold separately), which turns on your dust collector. Turn off your power tool, and after a short interval to clear dust, the blast gate closes and the dust collector powers down. This automation prevents the irritating dust clouds that result from forgetting to open a blast gate, and the reduced suction that results from forgetting to close it afterward. The system also ensures that at least one gate stays open when the vacuum is on to prevent overloading the motor on your dust collector. Prevents the irritating dust clouds you get from forgetting to open the blast gateReduces the potential for accidents from reaching for blast gates while machines are runningOptimizes the suction in your system by keeping a minimum number of gates open at one timeBlast gates can also be controlled via the handheld wireless remote or manually with the toggle switchKit includes two blast gates for 4'' hose, two 115v AC adapters, a wireless remote control and a manual toggle switchUp to eight blast gates can operate on one systemAdditional blast gates available separately (52504)RF range: 40'

Rockler Dust Right 4'' Tool Ports

Rockler Dust Right 4'' Tool Ports
$17.99

One end connects tightly to any tool with a 4" dust port, while the other fits perfectly into the Dust Right Handle (which connects to 4" hose and, ultimately, your dust collector), allowing you to move dust collection from tool to tool like never before! The Ports feature a flexible rubber boot on one side that guarantees a tight connection and allows for slight variations in the size of the tool's dust port. Includes two ports and two metal hose clamps.The Dust Right Tool Ports are designed to work with the Dust Right handle, which is available either individually (#22643) or in one of our Dust Right Packages (#35906, 36134).To connect the handle to smaller 2-1/2" ports, use a Tool Port in conjunction with our Hose Adapter (#20871).

Jet 723950 1-HP Oscillating Spindle Sander

Jet 723950 1-HP Oscillating Spindle Sander
$1,499.99

Thanks to a powerful 1HP motor, ten different spindle assemblies ranging from 1/4'' to 4'' in diameter, plus a full 1-1/2'' of vertical oscillation, the Jet JOSS-S Spindle Sander will make quick work of sanding a huge variety of inside curves. With its heavy-duty floorstanding design and spacious table, even large workpieces can be handled comfortably, with minimal tipping. The table can be tilted up to 45° to the front and 15° to the rear for sanding beveled edges. All spindles conveniently store in a neat rack inside the cabinet. Special attention has been payed to optimizing dust collection on this sander, including a flexible baffle system beneath the table to direct dust into the ports. With its rugged construction and precision ball bearings, this sander is sure to be with you for the long haul. Baffles create a chamber under the table for improved dust collection4'' dust port connects to your dust collection system to keep yourwork area cleanSpindle lock for quick and easy spindle changesTable tilts 45° front and 15° back and features a 90° quick indexIntegrated storage provides designated slots for spindles and table insertsSealed access door minimizes dust in the storage area1-1/2'' oscillating action reduces friction heat to protect wood and prolong sleeve lifeMain spindle support runs on precision ball bearings and is oscillated by a heavy-duty worm and gear mechanism for consistent performanceIntegrated paddle switch with safety keyPowerful 1HP motor is independently mounted inside the base for easy access and serviceIncludes 1/4'', 3/8'', 1/2'', 5/8'', 3/4'', 1'', 1-1/2'', 2'', 3'', and 4'' spindle assembliesSpindles have threaded ends for quick, easy changesWorm and gear mechanism runs in an oil bath to prolong its life and durability