Jet DC-1200VX-BK3 Dust Collector, 2HP 3PH 230/460V, 30-Micron Bag Filter Kit (710703K)

The JET DC-1200VX features the exclusive Vortex Cone which improves chip separation to prevent clogging of the filter, and increases packing efficiency of the collector bag. The high air velocity (CFM) stands up to any competitive specifications, and the industrial controls are designed for years of durable use. Collection bags have a snap ring for fast installation and removal. Casters offer maneuverability within the shop. Features:Vortex Cone improves chip separation and collector bag packing efficiencyEliminates premature filter clogging for sustained performanceSingle-stage design for economical and quiet operationIndustrial controls designed for years of trouble-free useQuick-connect collection bags with elastic band for fast, easy installation and removalHigh air velocity (CFM) design stands up to any competitive specificationsPermanently lubricated, totally enclosed, fan-cooled motors are rated for continuous-duty

$549.99
Buy
 

Related Products

Jet JWBS-14SF 14'' Bandsaw

Jet JWBS-14SF 14'' Bandsaw
$1,599.99

With a whopping 13-1/2" of resaw capacity, an industrial-quality build and conveniences such as tool-free blade guide adjustments and a quick-release blade tensioning system, Jet's JWBS-14SF is poised to make a big impression, with the small footprint of a bandsaw. The fence has been redesigned with a laser-etched scale and is micro-adjustable for incredible precision when ripping and resawing veneers and thin boards. Change blades quickly with one giant quick-releae lever. Enjoy a better blade guard, super-efficient dual dust ports and a fence faceplate that rotates easily from resawing position to standard ripping. With these features and more, this bandsaw will help you achieve a greater level of performance than ever before.Features:Redesigned fence with laser etched scale and micro-adjust feature.Two position faceplate provides appropriate support for every cut.Tool-less blade guide adjustments.Conveniently located dual dust collection ports.Sturdy wheels feature a shallow crown and polyurethane tires.Heavy duty tensioning with quick release.Four sided blade guard.Blades can be removed out the front of the table, no bending or angling required.Round table insert features leveling screws for precise adjustment.No assembly required.

Powermatic TS29 Shaper, 7-1/2HP 3PH 230/460V with Sliding Table

Powermatic TS29 Shaper, 7-1/2HP 3PH 230/460V with Sliding Table
$8,629.99

The new TS29 Tilt/Slide Shaper is ready to tackle any job. A new fence design includes dual digital readouts, micrometer adjustments and independently adjustable fence halves for fast, accurate set-ups. The full guard includes two stock hold-downs and a see-through cover that flips up for quick tool changes. Dual dust collection ports, in the guard and under the table insure a clear work area and improved finish. An extra large quill assembly with a full seven inch stroke has three oversize bearings and the ability to tilt, adding versatility and insuring long, trouble-free performance. Powered by a big 7-1/2HP motor that drives the spindle forward and reverse with five speeds. The massive sliding table is fully supported by six tapered precision bearings through a full four-foot stroke. In addition, on board the table is a large miter head complete with stock hold-down clamp and a 56" miter fence with flip stop. The large table can easily accommodate a stock feeder for longer production runs.Sliding table with 4-foot stroke works with miter head, hold-down and fence to accomodate everything from multiple end cuts to tenonsFully adjustable fence with dual digital readout for fast, accurate set-up and repeatabilityLarge table with built-in slider with room for stock feeder7" vertical spindle travel allows stacked toolingSpindle tilts negative 5 degrees to positive 45 degrees for increased versatilityLarge diameter multiple table inserts accomodate virtually any size cutterFive spindle speeds in forward and reverse with lighted indicatorSpecifications:Brand:PowermaticDust Collection Minimum CFM Required:800Dust Port Diameter (OD/in.):5 (dual ports)Electrical Controls - Magnetic Starter:24V MagneticFence Size (L x H/in.):46 x 5Fence Travel (Major and Minor/in.):5-3/8 and 3-5/8Height:53inchLength:51inchMaximum Diameter Cutter Above Table (in.):12Maximum Diameter Cutter Below Table (in.):9Model Number:TS29Motor HP:7-1/2HPMotor Phase:3PHMotor Voltage:230/460VNet Weight:1100poundOverall Dimensions:51 x 44 x 53Part Number:1791284Prewired:Prewired 230VReversable:YesRouter Bit Collet Diameter (in.):1/4 and 1/2Ship Weight:1280poundSlide Table Size (in.):11-1/4 x 51-1/4Spindle Diameter (in.):3/4, 1, and 1-1/4Spindle Size Under Nut (in.):3/4 Spindle - 3-1/2, 1 Spindle - 6-1/4, 1-1/4 Spindle - 6-1/4Spindle Speed (RPM):3000, 4000, 6000, 8000, and 10,000Spindle Travel (in.):7Table Inserts:one tilting, two straightTable Size (in.):51-1/2 x 33-1/2Table T-Slot (in.):n.a.Table Travel (in.):49-1/4Tilting Spindle (deg.):5 degrees back, 45 degrees forwardWidth:44inch

Rockler Dust Right 4'' Tool Ports

Rockler Dust Right 4'' Tool Ports
$17.99

One end connects tightly to any tool with a 4" dust port, while the other fits perfectly into the Dust Right Handle (which connects to 4" hose and, ultimately, your dust collector), allowing you to move dust collection from tool to tool like never before! The Ports feature a flexible rubber boot on one side that guarantees a tight connection and allows for slight variations in the size of the tool's dust port. Includes two ports and two metal hose clamps.The Dust Right Tool Ports are designed to work with the Dust Right handle, which is available either individually (#22643) or in one of our Dust Right Packages (#35906, 36134).To connect the handle to smaller 2-1/2" ports, use a Tool Port in conjunction with our Hose Adapter (#20871).