JET Model DC 650-BK dust collectors hook up to one to three machines at a time for optimum dust cleaning. Each 650 Series dust collector comes equipped with a quick-install collection bag, single-stage design for economical and quiet operation, four casters for maneuverability and total portability, and permanently lubricated, fully enclosed, fan-cooled motors for continuous duty.Features:Hook up one to three machines for optimum dust cleaningQuick-install collection bag makes emptying and re-attaching a snapSingle-stage design for economical and quiet operationIncludes four casters for maneuverability and total portabilityPermanently lubricated, totally enclosed, fan-cooled motors are rated for continuous dutyRockler Dust Right Master SystemThe secret is the innovative Dust Right Handle. One end accepts standard 4" dust hose, while the other is perfectly sized to slip in and out of the different Dust Right components. Just keep the Handle attached to your dust collector and you can move from task to task like never before. The included Tool Port fits on any 4" dust port for easy direct collection, and the Floor Nozzle combines with the 36" Extension Wand to keep floors spotless. The system also includes a smaller Bench Nozzle, a StableGate blast gate with a wall-mounting bracket to keep the hose organized, plus four spring clips to hang everything up and out of the way.
This 6" Jointer features a helical cutterhead with 40 four-sided indexable carbide knife inserts - this design provides a superior finish and quieter operation compared to conventional cutterheads, and the inserts require no adjustment once they are installed. If a knife insert becomes nicked, simply rotate it for a fresh edge and continue working. Oversized infeed/outfeed tables are mounted on dovetailed ways. The fence is 38" in length, with positive stops at 90° and 45° right and left. The fine/quick adjustment lever on the infeed table offers quick set-ups with precision controlled depth of cut. The heavy steel stand features a 1 HP motor with a non-slip v-belt drive for maximum performance. The 4" dust port offers easy connection to any dust collection system.Helical cutterhead with four-sided knife inserts provides smoother, quieter cutting and finer finish than conventional systems 66" long adjustable infeed and outfeed tables provide more working surface Fine/quick adjustment lever on infeed table for precision cuts Extra-long 38" two-way tilting fence with positive stops provides quick positioning for 90° or bevel cuts Enlarged sheet metal stand provides a sturdy base 1HP motor offers plenty of power Fence controls are center-mounted for convenience Push button switch is lockable to prevent accidental starting 4" port for dust collection Standard Equipment:1HP TEFC MotorTwo push blocksDust collection portCutterhead guardIndustrial push-button switch
The iVac Pro system eliminates the inconvenience of having to walk across the shop to turn on your dust collection system before operating a power tool. It also eliminates the chance that you will simply forego the dust collector to save a bit of time. Simply turn on your power tool and the Pro Tool Plus sends a wireless signal up to 40' to the Pro Switch (sold separately), which then powers up your dust collection system. Turn off your power tool, and the dust collector powers down. Here's how it works. The Pro Tool Plus is physically secured to the power cord of your power tool, and determines whether the tool is on or off by sensing the magnetic field surrounding the cord. Now plug your dust collection system into a Pro Switch (sold separately). In Auto Mode, when the power tool is turned on, the Tool Plus transmits a digital wireless signal to the Pro Switch instructing it to turn on and apply power to the Dust Collector. You can add a Pro Tool Plus to every tool that you want to have this capability. One Pro Switch can accommodate up to 8 Pro Tools, as long as they are within the 40' radio frequency range. You can even program your Pro Switch to run a little longer than your tool to allow for dust clearance. Get started today by selecting a Pro Switch in 240V or 115V and adding up to 8 Pro Tool Plus units. NOTE: IVac Pro System Boxes are built to handle the amperage advertised, however, both the UL (American) and CSA (Canadian) safety approval agencies require the boxes to be labeled at 80% of their actual amperage capacity due to the fact that the units have an attached power supply cord. Example - The 115 Volt / 20 Amp box is labeled as only 16 amps, however the box will actually continuously handle 20 amp AC mains. Automatically turns your dust collection system on or offWirelessly connect up to eight iVac Pro Tool Plus units (each sold separately) to an iVac Pro Switch for multi-tool coverageRun two or more power tools at the same time without interference (turning off one tool won't turn your dust collection system off if another tool is still runningTurn on delay helps avoid power surges from dust collector and power tool turning on at the same timeThree-position mode switch: Auto/Off/On40' line-of-sight range between the iVac Pro Switch and iVac Pro Tool Plus
The PM1300TX Dust Collector features the exclusive TurboCone which improves chip separation to prevent clogging of the filter, and increases packing efficiency of the collector bag. The canister filter offers superior filtering surface area over standard bags, and captures 98% of 2-micron particles. A digital timer can be set for up to 99 minutes, and an infrared sensor allows remote control operation. The all-metal duct improves rigidity and air flow. The clear collector bags are large capacity, which means less down-time changing them. Four swivel casters and conveniently located handles allow for easy mobility. Features:TurboCone improves chip separation and collector bag packing efficiencyThe cone eliminates premature filter clogging for sustained performanceRemote-controlled digital timer can be programmed for up to 99 minutesCanister filter offers over six times filtering surface area of standard bagsAll-metal duct construction for rigidity and improved air flowDual 4" dust ports for simultaneous collection from two machines1-3/4HP motor offers plenty of power for effective air movementCollection bag uses a snap ring for rapid installation and removal10 cubic feet capacity collection bag reduces number of bag changesFour swivel casters for easy maneuverability