JET Model DC-650 dust collectors hook up to one to three machines at a time for optimum dust cleaning. Each 650 Series dust collector comes equipped with a quick-install collection bag, single-stage design for economical and quiet operation, four casters for maneuverability and total portability, and permanently lubricated, fully enclosed, fan-cooled motors for continuous duty. An optional remote control is radio frequency so there is no need for line of sight to turn the machine on and off.Features:Hook up one to three machines for optimum dust cleaningQuick-install collection bag makes emptying and re-attaching a snapSingle-stage design for economical and quiet operationIncludes four casters for maneuverability and total portabilityHigh air velocity (CFM) design stands up to any competitive specificationsPermanently lubricated, totally enclosed, fan-cooled motors are rated for continuous dutyRockler Dust Right Master SystemThe secret is the innovative Dust Right Handle. One end accepts standard 4" dust hose, while the other is perfectly sized to slip in and out of the different Dust Right components. Just keep the Handle attached to your dust collector and you can move from task to task like never before. The included Tool Port fits on any 4" dust port for easy direct collection, and the Floor Nozzle combines with the 36" Extension Wand to keep floors spotless. The system also includes a smaller Bench Nozzle, a StableGate blast gate with a wall-mounting bracket to keep the hose organized, plus four spring clips to hang everything up and out of the way.
Unsecured blast gates can be sloppy and tedious to operate. Opening the gate often pulls the hose away from the wall. With its built-in mounting element, the StableGate™ takes care of everything. Just anchor it directly to the wall for clean and stable operation.
The JET DC-1100VX-5M features the exclusive Vortex Cone which improves chip separation to prevent clogging of the filter, and increases packing efficiency of the collector bag. The filter bag captures up to 98% of 5-micron particles. The high air velocity (CFM) stands up to any competitive specifications, and the industrial controls are designed for years of durable use. Collection bags have a snap ring for fast installation and removal. Casters offer maneuverability within the shop. Features:Vortex Cone improves chip separation and collector bag packing efficiencyEliminates premature filter clogging for sustained performanceSingle-stage design for economical and quiet operationIndustrial controls designed for years of trouble-free useQuick-connect collection bags with elastic band for fast, easy installation and removalHigh air velocity (CFM) design stands up to any competitive specificationsPermanently lubricated, totally enclosed, fan-cooled motors are rated for continuous-duty
Thanks to a powerful 1HP motor, ten different spindle assemblies ranging from 1/4'' to 4'' in diameter, plus a full 1-1/2'' of vertical oscillation, the Jet JOSS-S Spindle Sander will make quick work of sanding a huge variety of inside curves. With its heavy-duty floorstanding design and spacious table, even large workpieces can be handled comfortably, with minimal tipping. The table can be tilted up to 45° to the front and 15° to the rear for sanding beveled edges. All spindles conveniently store in a neat rack inside the cabinet. Special attention has been payed to optimizing dust collection on this sander, including a flexible baffle system beneath the table to direct dust into the ports. With its rugged construction and precision ball bearings, this sander is sure to be with you for the long haul. Baffles create a chamber under the table for improved dust collection4'' dust port connects to your dust collection system to keep yourwork area cleanSpindle lock for quick and easy spindle changesTable tilts 45° front and 15° back and features a 90° quick indexIntegrated storage provides designated slots for spindles and table insertsSealed access door minimizes dust in the storage area1-1/2'' oscillating action reduces friction heat to protect wood and prolong sleeve lifeMain spindle support runs on precision ball bearings and is oscillated by a heavy-duty worm and gear mechanism for consistent performanceIntegrated paddle switch with safety keyPowerful 1HP motor is independently mounted inside the base for easy access and serviceIncludes 1/4'', 3/8'', 1/2'', 5/8'', 3/4'', 1'', 1-1/2'', 2'', 3'', and 4'' spindle assembliesSpindles have threaded ends for quick, easy changesWorm and gear mechanism runs in an oil bath to prolong its life and durability