Kreg Jig K4MS Master System

With a sturdy toggle clamp to secure your stock to the jig, and a large frontal clamping recess for securing the jig to the bench, you'll get perfect alignment every time. Thanks to the removable drill guide and portable base, you have the option of taking the jig to large work pieces and awkward locations or slipping it in your pocket for work on the job site. The material support stop guarantees perfect repeatability time after time, and the dust collection shroud aids in chip expulsion for faster, cleaner drilling. Adjustable for 1/2" to 1-1/2" thick stock in 1/8" incremental settings.3 tools in 1 - benchtop jig, portable contractor jig, repair jig with addition of spacer blocks to the bottom of drill guide3-hole drill guide w/hardened steel core-adjustable for 1/2" to 1-1/2" stock thicknesses in 1/8" incrementsMaterial support stop swings out of the way for multiple holesGlass reinforced nylon bodyWood chip relief-one relief hole for each drill guide hole keeps chips clear for faster drilling and less burningLarge clamping recess Sturdy toggle clamp - easily adjusted

$139.00
Buy
 

Related Products

iVac Pro 4'' Blast Gate Starter Pack

iVac Pro 4'' Blast Gate Starter Pack
$239.99

This electronically driven automatic blast gate system is an optional upgrade to the iVac Pro Wireless Dust Collection Control System, bringing one-touch simplicity to managing your dust collection airflow. Simply turn on your power tool, and the iVac Pro Tool (42891, sold separately) sends a wireless signal to automatically open the corresponding Pro Blast Gate, and another signal to the iVac Pro Switch (42897, sold separately), which turns on your dust collector. Turn off your power tool, and after a short interval to clear dust, the blast gate closes and the dust collector powers down. This automation prevents the irritating dust clouds that result from forgetting to open a blast gate, and the reduced suction that results from forgetting to close it afterward. The system also ensures that at least one gate stays open when the vacuum is on to prevent overloading the motor on your dust collector. Prevents the irritating dust clouds you get from forgetting to open the blast gateReduces the potential for accidents from reaching for blast gates while machines are runningOptimizes the suction in your system by keeping a minimum number of gates open at one timeBlast gates can also be controlled via the handheld wireless remote or manually with the toggle switchKit includes two blast gates for 4'' hose, two 115v AC adapters, a wireless remote control and a manual toggle switchUp to eight blast gates can operate on one systemAdditional blast gates available separately (52504)RF range: 40'

Rockler 2-1/2'' StableGate with Bracket

Rockler 2-1/2'' StableGate with Bracket
$5.99

Unsecured blast gates can be sloppy and tedious to operate. Opening the gate often pulls the hose away from the wall. With its built-in mounting element, the StableGateā„¢ takes care of everything. Just anchor it directly to the wall for clean and stable operation.

Shaker Felt Dust Collection Bags

Shaker Felt Dust Collection Bags
$34.99

Made of high quality 10 ounce Shaker felt to capture dust to one micron! This material has both high breath ability and excellent dust release - the ratio of collection is 50 CFM per square foot of cloth. Shaker felt is "singed" on the collection side to create the dust cake that actually captures additional dust.