If you're serious about woodworking, you know the importance of safety and keeping a clean shop. Now you can rely on Laguna Tools for both with its 3HP Mobile Cyclone System. It delivers the power and quality to separate dust and fine particles from the air you breathe, making your shop a safe shop!Features:Dust and debris is collected in a 60 gallon metal collection drumQuick-release collection drum with separate wheels for quick and easy emptyingRemote control to start the machine from anywhere in your shopAllows wood particles and dust to be separated from the air stream before going to the pleated cartridge filterSuperior dust collection and air filtration so that the wood particles do not pass through the efficient fan unitDust is collected in a 60 gallon metal collection drum which features quick release and separate wheels for quick and easy emptyingIncludes a quick-release handle that makes it quick and easy to empty and remove the pleated filterNegative pressure hose is fed to the bottom of the drum to ensure the plastic bag remains inside the drumRemote control allows you to start the machine from anywhere in the shop saving you time and stepsIndustrial casters allow this machine to move easily around your shopVery quiet operation, protecting your ears as well as your lungs
Routing particleboard or MDF without dust collection is like standing in the desert during a sand storm. The air becomes a hazy mess, your router table and floor are covered with fine dust and-worst of all-what's in the air ends up all over you. This fence provides shelter from the "storm" by drawing dust and chips away at the source.
This 6" Jointer features a helical cutterhead with 40 four-sided indexable carbide knife inserts - this design provides a superior finish and quieter operation compared to conventional cutterheads, and the inserts require no adjustment once they are installed. If a knife insert becomes nicked, simply rotate it for a fresh edge and continue working. Oversized infeed/outfeed tables are mounted on dovetailed ways. The fence is 38" in length, with positive stops at 90° and 45° right and left. The fine/quick adjustment lever on the infeed table offers quick set-ups with precision controlled depth of cut. The heavy steel stand features a 1 HP motor with a non-slip v-belt drive for maximum performance. The 4" dust port offers easy connection to any dust collection system.Helical cutterhead with four-sided knife inserts provides smoother, quieter cutting and finer finish than conventional systems 66" long adjustable infeed and outfeed tables provide more working surface Fine/quick adjustment lever on infeed table for precision cuts Extra-long 38" two-way tilting fence with positive stops provides quick positioning for 90° or bevel cuts Enlarged sheet metal stand provides a sturdy base 1HP motor offers plenty of power Fence controls are center-mounted for convenience Push button switch is lockable to prevent accidental starting 4" port for dust collection Standard Equipment:1HP TEFC MotorTwo push blocksDust collection portCutterhead guardIndustrial push-button switch
Dust Right 4" Quick Release Starter KitMove dust collection from one tool to the next like never before! One end of the 4" Dust Right Tool Port connects tightly to any tool with a 4" dust port, while the other end fits perfectly into the Dust Right Handle (which connects to 4" hose and, ultimately, your dust collector), allowing you to move dust collection to right where you need it. The ports feature a flexible rubber boot on one side that guarantees a tight connection and allows for slight variations in the size of the tool's dust port. Includes two 4" Dust Right Tool Ports with two metal hose clamps Dust Right Handle